Search NASA⌕ Search

SEARCH · Search NASA

Results for “Binding Energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Hot Carrier Redistribution, Electron-Phonon Interaction, and Their Role in Carrier Relaxation in Thin Film Metal-Halide Perovskites

Temperature dependent (4–295 K) photoluminescence and transmission spectra are analyzed to study the effect of changing the different components of a perovskite compound, be it A, B, or X. Four different films are compared: FAMAPbSnI3, FAPbI3, FAMAPbI3, and FAPbBr3. The low temperature results highlight the changes that occur, especially underlying ones that are easily masked at room temperature. The overall Stokes shift is of similar magnitude at room temperature for the three Pb only based samples. This is governed by the interaction strength GLO, phonon energy ELO, and exciton binding energy Eex. One exception to this behavior is the Sn based FAMAPbSnI3 film, which shows a lack of Stokes shift between the absorption and photoluminescence. However, the strong absorption (more than 100 meV) below the band gap is indicative of an excitonic feature that has a large density of states. Transient absorption measurements confirm the trends observed in continuous wave (CW) measurements; the three Pb only films all show the convolution of an excitonic feature within 20 meV of the band gap as a contributing factor to the photobleach along with a region of high energy photoinduced absorption (PIA). However, the behavior for the Sn based film is notably different (just as it is in the CW measurements) with an unusual low energy PIA and a lack of high energy PIA. The large unusual low energy PIA is attributed to the large sub-band-gap absorption observed in the CW transmission/absorption measurements. Notably, regardless of interchanging components, the slow cooling of carriers in metal-halide perovskites shows little effect of GLO, ELO, and Eex. As such, here it is proposed that while the initial cooling of carriers is attributed to LO phonons, the overall cooling of carriers is dominated by the intrinsic low thermal conductivity of all metal-halide perovskites, which limits the dissipation of acoustic phonons in these systems

2D perovskites↗
DOE OSTI2024

Physical Correlations and Predictions Emerging from Modern Core-collapse Supernova Theory

Abstract In this paper, we derive correlations between core-collapse supernova observables and progenitor core structures that emerge from our suite of 20 state-of-the-art 3D core-collapse supernova simulations carried to late times. This is the largest such collection of 3D supernova models ever generated and allows one to witness and derive testable patterns that might otherwise be obscured when studying one or a few models in isolation. From this panoramic perspective, we have discovered correlations between explosion energy, neutron star gravitational birth masses, 56 Ni and α -rich freezeout yields, and pulsar kicks and theoretically important correlations with the compactness parameter of progenitor structure. We find a correlation between explosion energy and progenitor mantle binding energy, suggesting that such explosions are self-regulating. We also find a testable correlation between explosion energy and measures of explosion asymmetry, such as the ejecta energy and mass dipoles. While the correlations between two observables are roughly independent of the progenitor zero-age main-sequence (ZAMS) mass, the many correlations we derive with compactness cannot unambiguously be tied to a particular progenitor ZAMS mass. This relationship depends on the compactness/ZAMS mass mapping associated with the massive star progenitor models employed. Therefore, our derived correlations between compactness and observables may be more robust than with ZAMS mass but can nevertheless be used in the future once massive star modeling has converged.

Astronomy & Astrophysics↗
DOE OSTI2021

CHARGED POINT DEFECTS AND DEFECT COMPLEXES IN PHOSPHORENE AND STRUCTURAL PREDICTION OF TAU-11, A DENSITY FUNCTIONAL THEORY APPROACH

With the advent of powerful computers, first principle calculations have become a robust and reliable tool to complement experiments in the study of materials. First principle calculations such as density functional theory can be used to guide experiments to save time and effort when it comes to new and advanced materials discovery. Study of charge defects in materials and crystal structure prediction are such areas in which density functional theory calculations facilitate the prediction of defect formation energy, charge transition levels and elemental site occupations. Experimentally, studying charge defects requires inferring results from various techniques. Likewise, determining site occupancies for similar elements using experimental techniques is challenging and sometimes impossible. In this work, we study the charged intrinsic and extrinsic defects and defect complexes in phosphorene and determine the site occupancies of Al, Fe and Si in the τ11 phase using density functional theory. In the defect work, we calculate the defect formation energy, charge transition level, binding energies and Stokes shift for vacancy, dopant substitution and dopant-vacancy defect complexes in phosphorene. We found that vacancy defect in phosphorene becomes negatively charged in n-type doping and may passivate the dopants and reduce carrier concentration and mobility. For non-metal dopants in phosphorene, we predict that O, S and Si prefer to form dopant-vacancy complexes removing the vacancy defect states from the band gap. Mn dopant-vacancy defect complex exhibits possibility of switching between two magnetic spin states. Lastly, using density functional theory, we complement the results from neutron powder diffraction to determine the site occupancies of Al and Si in τ11 phase which was used to determine the alloying element to develop a high temperature and low density alloy.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Energy Flows in Static and Programmable Catalysts

Programmable catalysts that change on the time scale of a catalytic cycle provide a new opportunity to control the flow of energy to reactants and products to promote faster and more selective chemistry. While traditional chemical manufacturing processes consume energy to achieve favorable reaction conditions, programmable catalysts aim to dynamically add or remove energy to catalytic cycles through perturbations of the catalytic surface via strain, charge, or light. These surface energy flows are quantified by the changes in adsorbate binding energy with time, and the overall efficiency relating energy inputs to catalytic performance is defined by the characteristics of the undulating catalytic surface. Here, understanding and quantifying energy flows in programmable catalysts provides baseline definitions and metrics for comparing dynamic conditions and identifying optimal catalytic performance for more efficient chemical manufacturing.

Binding energy↗
DOE OSTI2022

Single-nucleon energies changing with nucleon number

The broad range of accumulated experimental data on the binding energies for single-particle states in nuclei is examined as a function of the constituent number of neutrons and protons and an unexpectedly simple pattern emerges. The dependence of the energies of neutron states on the number of constituent protons, or of proton states on the number of neutrons, are very similar to each other and the sign reflects the well-known strong attraction. For the same kind of nucleons changing as in the state – energies for neutron states with neutron number changing or proton states with protons – the dependence is at least a factor of four weaker in magnitude and slightly repulsive, except when the changing nucleons are only within the same orbit as the state. The systematics of the accumulated data are presented with a minimum of use made of model assumptions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Light nuclei with semilocal momentum-space regularized chiral interactions up to third order

In this work, we present a systematic investigation of few-nucleon systems and light nuclei using the current Low Energy Nuclear Physics International Collaboration interactions comprising semilocal momentum-space regularized two- and three-nucleon forces up to third chiral order (N 2 LO). Following our earlier study utilizing the coordinate-space regularized interactions, the two low-energy constants entering the three-body force are determined from the triton binding energy and the differential cross-section minimum in elastic nucleon-deuteron scattering. Predictions are made for selected observables in elastic nucleon-deuteron scattering and in the deuteron breakup reactions, for properties of the A = 3 and A = 4 nuclei, and for spectra of p-shell nuclei up to A = 16. A comprehensive error analysis is performed including an estimation of correlated truncation uncertainties for nuclear spectra. The obtained predictions are generally found to agree with experimental data within errors. Similarly to the coordinate-space regularized chiral interactions at the same order, a systematic overbinding of heavier nuclei is observed, which sets in for A~10 and increases with A.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Microscopic origin of reflection-asymmetric nuclear shapes

The presence of nuclear ground states with stable reflection-asymmetric shapes is supported by rich experimental evidence. Theoretical surveys of odd-multipolarity deformations predict the existence of pear-shaped isotopes in several fairly localized regions of the nuclear landscape in the vicinity of near-lying single-particle shells with Δℓ = Δj = 3. We analyze the role of isoscalar, isovector, neutron-proton, neutron-neutron, and proton-proton multipole interaction energies in inducing the onset of reflection-asymmetric ground-state deformations. The calculations are performed in the framework of axial reflection-asymmetric Hartree-Fock-Bogoliubov theory using two Skyrme energy-density functionals and density-dependent pairing force. We show that reflection-asymmetric ground-state shapes of atomic nuclei are driven by the odd-multipolarity neutron-proton (or isoscalar) part of the nuclear interaction energy. This result is consistent with the particle-vibration picture, in which the main driver of octupole instability is the isoscalar octupole-octupole interaction giving rise to large E3 polarizability. The necessary condition for the appearance of localized regions of pear-shaped nuclei in the nuclear landscape is the presence of parity doublets involving Δℓ = Δj = 3 proton or neutron single-particle shells. This condition alone is, however, not sufficient to determine whether pear shapes actually appear, and, if so, what the corresponding reflection-asymmetric deformation energies are. The predicted small reflection-asymmetric deformation energies result from dramatic cancellations between even- and odd-multipolarity components of the nuclear binding energy.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Neutron-proton pairing correction in the extended isovector and isoscalar pairing model

An extended O ST (8) model with multi j-orbits is constructed based on the angular momentum decomposition with “pseudo”-spin S for valence nucleons in a j-orbit. It is shown that the isovector S = 0 and T=1 pairs are exactly the J=0 and T=1 pairs in a given j-orbit, while the isoscalar S = 1 pairs are linear combinations of J=odd pairs, with which the pairing Hamiltonian can be used to estimate isovector and isoscalar pairing interactions. As an example of the model application, some low-lying J = 0 + level energies of even-even and odd-odd A=18 – 28 nuclei up to the half-filling in the ds-shell above the 16 O core are fit by the model and compared with the fitting results of the same Hamiltonian in the O LST (8) form. It has been verified from the fitting of both the models that the isoscalar pairing interaction can be neglected in the lower energy part of the spectra of these ds-shell nuclei as far as binding energies and a few J=0 + excited levels of these nuclei are concerned. With the mean-field plus isovector pairing interaction only, neutron-neutron, proton-proton, and neutron-proton pairing contributions at the ground or the lowest J=0 + state of these nuclei are estimated. It is shown that the isovector np-pairing contribution to the binding in the odd-odd N=Z nuclei is systematically larger than that in the even-even nuclei. Furthermore, the isoscalar np-pair content at the lowest J=0+ state of these nuclei is also estimated. In both the O ST (8) and O LST (8) models, it is clearly shown that the isoscalar-pair content in the lowest J=0 + state of the N=Z and N=Z±2 nuclei increases with increasing of the valence nucleons, especially in those even-even nuclei, which indicates the isoscalar pairing correlation to be of importance at low-lying states of N=Z and N=Z±2 nuclei, especially in those even-even nuclei with more valence nucleons up to the half-filling, even though the isoscalar pairing interaction is negligible.

20 ≤ A ≤ 38↗
DOE OSTI2025

Assessing the Performance of Exchange‐Correlation Density Functionals in Describing the Iron‐Catalyzed Ammonia Synthesis System

Density functional theory (DFT) has been widely employed for elucidating mechanistic aspects of heterogeneous catalysis. However, the accuracy of DFT calculations relies heavily on selecting an exchange-correlation (XC) functional that correctly describes the electronic structure of materials involved in the reactions. This study assesses the accuracy of several XC density functionals for modeling the iron-catalyzed ammonia synthesis system. In the assessment of functional accuracy, experimental references are compared to DFT-calculated values for the formation energy of gas-phase ammonia and nitrogen, bulk Fe/Fe-nitride (γ′-Fe 4 N) lattice constants and cohesive/formation energies, and nitrogen and ammonia binding energies on Fe(100), Fe(111), Fe(110), and γ′-Fe 4 N(111). It is observed that the experimental value for each of these descriptors is accurately modeled by at least one functional. RPBE alone provides reliable estimates for both the lattice constant and cohesive energy of Fe and γ′-Fe 4 N. Temperature-programmed desorption experiments led to estimates for N and NH 3 adsorption across several Fe-based facets that are best captured by RPBE. These results highlight the importance of choosing an appropriate XC functional that accurately describes experimental systems and offer insights into effectively modeling the interactions between nitrogen and ammonia on Fe-based surfaces.

adsorption↗
DOE OSTI2021

Capture efficiency and bias from the defect dynamics near grain boundaries in BCC Fe using mesoscale simulations

The capture efficiency describes the capability of a sink, such as a grain boundary (GB), dislocation, and void, to absorb point defects (PDs). The bias defines the difference in capture efficiency between the absorption of a vacancy and dumbbell at a sink. Complete kinetic information on PDs, including diffusion barriers and diffusion orientations, as well as accurate saddle points, are needed to determine the capture efficiency and bias at a sink accurately, which is computationally demanding. Here, in the present study, the Self-Evolving Atomistic Kinetic Monte Carlo (SEAKMC) method was used to investigate the defect dynamics of PDs near different types of grain boundaries (GBs) (with both $\langle$100$\rangle$ and $\langle$110$\rangle$ families) accurately in body-centered cubic (BCC) iron (Fe). The capture efficiency, sink strength, and bias factor of different types of GBs were determined in Fe, which, different from traditional rate theory estimation, showed a distinct capture efficiency, sink strength, and bias in different GBs. The results demonstrate a strong positive correlation between the capture efficiency and the GB strain width, instead of the GB misorientation, GB energy, or GB-PD binding energy, which have been investigated previously. This work provides valuable insight into the radiation-induced microstructural evolution of GBs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Density dependence of the symmetry energy in the post–PREX-CREX era

The recently published CREX results suggest a rather peculiar picture for the density dependence of the symmetry energy. Whereas PREX favors a large neutron skin thickness in 208 Pb, thereby suggesting a stiff equation of state, CREX suggests instead a much softer equation of state. Here, this discrepancy has caused a large spur in the theoretical community, since no model has been able to simultaneously reproduce within 1σ the PREX and CREX results. Motivated by a novel correlation between a CREX observable and a combination of bulk symmetry energy parameters, we calibrate three new covariant energy density functionals that reproduce binding energies and charge radii of spherical nuclei—and also accommodate the constraints imposed by PREX and CREX. Given that these models suggest a stiff equation of state at high densities, predictions for neutron star properties are also discussed.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Molybdenum and silver photoemission survey spectra from hard x-rays

Electron emission from thick polished samples of polycrystalline molybdenum (Mo) and single crystalline $\langle$111$\rangle$ silver (Ag) was measured with hard x-ray photoemission spectroscopy. Six different excitation x-ray energies were used, nominally 8.0, 11.0, 13.0, 15.0, 18.0, and 21.5 keV. Survey spectra were recorded with each excitation to a kinetic energy of at most 15 keV, often capturing the entire emission range. The Mo 1s core peak was measured. Detailed LMM Auger spectra of Mo show marked increases in intensity and altered shape when x-ray energy exceeds the Mo 1s binding energy. The Mo and Ag L-shell photoelectron peaks are measured at four x-ray energies up to 18 keV showing the transition from 2p3/2 to 2s photoionization dominance.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Density dependence of the symmetry energy in the post–PREX-CREX era

The recently published CREX results suggest a rather peculiar picture for the density dependence of the symmetry energy. Whereas PREX favors a large neutron skin thickness in 208 Pb, thereby suggesting a stiff equation of state, CREX suggests instead a much softer equation of state. This discrepancy has caused a large spur in the theoretical community, since no model has been able to simultaneously reproduce within 1σ the PREX and CREX results. Motivated by a novel correlation between a CREX observable and a combination of bulk symmetry energy parameters, we calibrate three new covariant energy density functionals that reproduce binding energies and charge radii of spherical nuclei—and also accommodate the constraints imposed by PREX and CREX. Given that these models suggest a stiff equation of state at high densities, predictions for neutron star properties are also discussed.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

3D Hydrodynamics of Pre-supernova Outbursts in Convective Red Supergiant Envelopes

Eruptive mass loss likely produces the energetic outbursts observed from some massive stars before they become core-collapse supernovae (SNe). The resulting dense circumstellar medium may also cause the subsequent SNe to be observed as Type IIn events. The leading hypothesis of the cause of these outbursts is the response of the envelope of the red supergiant (RSG) progenitor to energy deposition in the months to years prior to collapse. Early theoretical studies of this phenomenon were limited to 1D, leaving the 3D convective RSG structure unaddressed. Using FLASH's hydrodynamic capabilities, we explore the 3D outcomes by constructing convective RSG envelope models and depositing energies less than the envelope binding energies on timescales shorter than the envelope dynamical time deep within them. We confirm the 1D prediction of an outward-moving acoustic pulse steepening into a shock, unbinding the outermost parts of the envelope. However, we find that the initial 2–4 km s -1 convective motions seed the intrinsic convective instability associated with the high-entropy material deep in the envelope, enabling gas from deep within the envelope to escape and increasing the amount of ejected mass compared to an initially "quiescent" envelope. The 3D models reveal a rich density structure, with column densities varying by ≈10× along different lines of sight. Our work highlights that the 3D convective nature of RSG envelopes impacts our ability to reliably predict the outburst dynamics, the amount, and the spatial distribution of the ejected mass associated with deep energy deposition.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1977

Interpretation of the silver L X-ray spectrum

Silver L X-ray energies were calculated using theoretical binding energies from relaxed orbital relativistic Hartree-Fock-Slater calculations. Theoretical X-ray energies are compared with experimental results.

Chen, M. H.↗
NASA NTRS1979

Bandgap narrowing in moderately to heavily doped silicon

A theoretical model of bandgap narrowing in silicon at high doping levels has been developed. The model takes into account the electrostatic energy of interaction between a minority carrier and the majority carriers surrounding it, which reduces the thermal energy necessary for creation of an electron-hole pair. A pair energy similar to the excitonic binding energy of bound electron-hole pairs in insulators is obtained. Theoretical results are in excellent agreement with experimental results in the doping range from 3 times 10 to the 17th to 1.5 times 10 to the 20th/cu cm at room temperature. These results indicate that at high injection levels such as a transistor biased into the conductivity-modulation regime or a solar cell whose surface is established by ion implantation into an oxide layer, the bandgap narrowing is determined by the injected carrier concentration rather than by the doping level.

Lanyon, H. P. D.↗
NASA NTRS1979

The hydrodynamics of off-center explosions

The behavior of off-center supernova explosions is investigated using a two-dimensional hydrodynamic code. An important application of these calculations is the possible formation of high-velocity pulsars. The dependence of the final velocity of the collapsed remnant on the location and energy of the explosion is computed. The largest remnant velocities result from explosions located at a mass fraction of 0.5. An explosion energy 50% greater than the binding energy of the star ejects 0.51 solar masses, producing a 1.4 solar mass remnant with a velocity of 400 km/s. However, this energy must be generated in a very small region of the star in order to create the required asymmetry in the explosion. Because of this, a specific energy of about 10 to the 20th ergs/g is needed. Nuclear reactions can produce no more than about 5 x 10 to the 17th erg/g, and it is unclear how the energy produced in gravitational collapse models can be sufficiently localized. Unless a supernova mechanism can be found which can produce enough energy in a small region of the star, off-center explosions do not provide a satisfactory explanation for high-velocity pulsars.

Fryxell, B. A.↗