Search NASA⌕ Search

SEARCH · Search NASA

Results for “Biomedical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Recent Advances in Iron Oxide Nanoparticles (IONPs): Synthesis and Surface Modification for Biomedical Applications

In recent years, extensive researches were devoted to iron oxide nanoparticles (IONPs), including magnetite (Fe{sub 3}O{sub 4}) and maghemite (γ-Fe{sub 2}O{sub 3}), due to their low toxicity and cost, in addition to their unique physicochemical and magnetic properties. In this review, we present a brief introduction on IONPs in terms of classification and properties. Because the synthesis approach and surface modification are found to be key factors for better control of particle morphology and shape, as well as to produce monodispersed IONPs, which have direct influence on their properties and applications, particular emphasis will be given to the chemical synthesis methods and surface modifications by several organic materials such as polyvinylpyrrolidone (PVP), chitosan, and cetyltrimethylammonium bromide (CTAB). Recent trends and future prospects in this research field are also discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Multifunctional polymer dispersions for biomedical assays obtained by heterophase radical polymerization

Methods for the preparation of multifunctional dispersions of polymer particles (DPP) in the course of free radical heterophase polymerization, which provides careful control of both macromolecular and colloidal properties, are considered. Approaches that, according to the polymerization technique, make it possible to control the particle diameter and shape, particle size distribution, colloidal stability, morphology, surface chemistry and functionality, as well as the formation of organo-inorganic hybrid particles, are demonstrated. The possibilities of DPP application in homogeneous and heterogeneous assays and cell labelling are reviewed. The use of DPP leads to decrease the reaction scales and costs and to increase the speed, sensitivity, selectivity, and reproducibility of assays.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Nb on Superelasticity and Low Modulus Properties of Metastable β-Type Ti-Nb-Ta-Zr Biomedical Alloys

In this work, a series of Ti-xNb-2Ta-3Zr (x = 25, 30, 35, 40 wt.%) alloys are designed, and the transformation of β-phase to α″ martensitic, β-phase stability, microstructure, mechanical properties and corrosion performance of these alloys are investigated. The phase analysis shows as the Nb content increases, the α″ phase in these alloys decreases, while the intensity of the two main peaks β(110) and β(211) of Ti-40Nb-2Ta-3Zr alloy is reduced. These results can be attributed to the variation of β-phase stability caused by Nb element of alloy and cold rolling process. The mechanical properties test shows that the elastic modulus (52 GPa) of the Ti-35Nb-2Ta-3Zr alloy is the lowest and the elongation (18.8%) is the maximum. In addition, the alloy is susceptible to β-phase elastic deformation and stress-induced martensitic transformation resulting in the highest recovery strain of the alloy (66.87%). The polarization curves show that the Ti-35Nb-2Ta-3Zr alloy has the highest corrosion potential (− 0.34 V) and the lowest corrosion current density (0.21 μA cm{sup −2}) exhibiting the best corrosion resistance.

36 MATERIALS SCIENCE↗

Microstructural and Textural Evolutions during β → α/ω Transformation in Biomedical Ti-15Mo Alloy and Its Effects on Mechanical Performance

This study investigated the precipitation behaviors and mechanical performance of Ti-15Mo alloy subjected to different treatment conditions. The microstructures were analyzed via scanning electron microscopy and transmission electron microscopy. The tensile properties and resultant fracture surfaces were investigated to determine the relationship between the phase transformation and mechanical performance. The Ti-15Mo alloy had a notable elongation due to no observable precipitation during solution treatment plus quenching (STQ). A high ultimate tensile strength (UTS) was obtained with a considerable amount of ω precipitates transformed during air cooling after solution treatment (ST). The coarse precipitates and additional precipitation free zones in the Ti-15Mo alloy treated with furnace cooling (FC) after ST induced a decrease in UTS. Furthermore, the absence of a continuous grain boundary α phase resulted in a lower strength in the specimen annealed at 600 °C after hot rolling. The alloy iso-aged after STQ exhibited good tensile properties with a UTS of 920 MPa and an elongation of 15%. The texture and variant relationship of the precipitates was analyzed with x-ray diffraction and electron backscatter diffraction. The common variants of the β matrix influenced the nucleation of precipitates in the Ti-15Mo alloy annealed after hot rolling, and the precipitates showed an obvious {01-10}α main texture. The variant selection of α precipitates at the grain boundary was caused by the two adjacent β grains in the alloy treated by FC after ST.

36 MATERIALS SCIENCE↗

Attitudes Toward Blinding of Peer Review and Perceptions of Efficacy Within a Small Biomedical Specialty

Purpose: Peer reviewers' knowledge of author identity may influence review content, quality, and recommendations. Therefore, the International Journal of Radiation Oncology, Biology, Physics (“Red Journal”) implemented double-blinded peer review in 2011. Given the relatively small size of the specialty and the high frequency of preliminary abstract presentations, we sought to evaluate attitudes, the efficacy of blinding, and the potential impact on the disposition of submissions. Methods and Materials: In May through August 2012, all Red Journal reviewers and 1 author per manuscript completed questionnaires regarding demographics, attitudes, and perceptions of success of blinding. We also evaluated correlates of the outcomes of peer review. Results: Questionnaires were received from 408 authors and 519 reviewers (100%). The majority of respondents favored double blinding; 6% of authors and 13% of reviewers disagreed that double blinding should continue in the Red Journal. In all, 50% of the reviewers did not suspect the identity of the author of the paper that they reviewed; 19% of reviewers believed that they could identify the author(s), and 31% suspected that they could. Similarly, 23% believed that they knew the institution(s) from which the paper originated, and 34% suspected that they did. Among those who at least suspected author identity, 42% indicated that prior presentations served as a clue, and 57% indicated that literature referenced did so. Of those who at least suspected origin and provided details (n=133), 13% were entirely incorrect. Rejection was more common in 2012 than 2011, and submissions from last authors with higher H-indices (>21) were more likely to survive initial review, without evidence of interactions between submission year and author gender or H-index. Conclusions: In a relatively small specialty in which preliminary research presentations are common and occur in a limited number of venues, reviewers are often familiar with research findings and suspect author identity even when manuscript review is blinded. Nevertheless, blinding appears to be effective in many cases, and support for continuing blinding was strong.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Deformation behavior of metastable β-type Ti-25Nb-2Mo-4Sn alloy for biomedical applications

The deformation behavior of metastable β-type Ti–25Nb–2Mo–4Sn (wt%) alloy subjected to different thermo-mechanical treatments was discussed by the combining results from transmission electron microscope, tensile test and in-situ synchrotron X-ray diffraction. Visible “double yielding” behavior, which is characterized by the presence of stress-plateau, was observed in the solution treated specimen. Upon a cold rolling treatment, the Ti–25Nb–2Mo–4Sn alloy performs nonlinear deformation because of the combined effects of elastic deformation and stress-induced α" martensitic transformation. After the subsequent annealing, the β phase is completely stabilized and no stress-induced martensitic transformation takes place on loading due to the inhibitory effect of grain boundaries and dislocations on martensitic transformation. As a result, the annealed specimen exhibits linear elastic deformation.

Guo, S.↗

The effect of boron addition on microstructure and mechanical properties of biomedical Ti35Nb6Ta alloy

The beta-titanium alloys are promising materials for bioapplications but their processing via melting is difficult. Coarse grains have been observed in as-cast specimens. Subsequent thermo-mechanical processing seems to be necessary in order to obtain fine-grained microstructure with better mechanical properties. The grain size can be decreased significantly by addition of small boron amount. In this work Ti–35Nb–6Ta alloy with various B additions (0, 0.05, 0.1, 0.3 and 0.5 wt.%) has been studied. Even the smallest amount of B leads to significant grain refinement in Ti–35Nb–6Ta alloy (from 1300 to about 350 μm). Slight grain refinement has been observed also after hot forging and solution treatment. TiB particles emerged in specimens due to B addition. These particles contribute to changes in mechanical properties not only in hot forged and solution treated specimens (hardness increase from 140 to 180 HV10), but also in cold swaged specimens (hardness from 230 to 250 HV10, tensile strength from 800 to 920 MPa). The hardness values can be increased up to 370 HV10 during aging at 400 °C (specimen with 0.5 wt.% B). It has been observed that specimens with low boron addition 0.05 wt.% possess no cytotoxicity. On the other hand in specimens with 0.1 wt.% B or more slight adverse effect on cytotoxicity has been observed. - Highlights: • The influence of boron on microstructure and mechanical properties has been studied. • Beta-transus temperature has been determined. • Cytotoxicity depending on boron content has been evaluated. • Possibility of final heat treatment has been determined.

36 MATERIALS SCIENCE↗