Search NASA⌕ Search

SEARCH · Search NASA

Results for “Body Composition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Anitproton-matter interactions in antiproton applications

By virtue of the highly energetic particles released when they annihilate in matter, antiprotons have a variety of potentially important applications. Among others, these include remote 3-D density and composition imaging of the human body and also of thick, dense materials, cancer therapy, and spacecraft propulsion. Except for spacecraft propulsion, the required numbers of low energy antiprotons can be produced, stored, and transported through reliance on current or near term technology. Paramount to these applications and to fundamental research involving antiprotons is knowledge of how antiprotons interact with matter. The basic annihilation process is fairly well understood, but the antiproton annihilation and energy loss rates in matter depend in complex ways on a number of atomic processes. The rates, and the corresponding cross sections, were measured or are accurately predictable only for limited combinations of antiproton kinetic energy and material species.

Morgan, David L., Jr.↗
NASA NTRS1993

Origin of ureilite meteorites and implications for planetary accretion

The present analysis of the ureilite meteorites suggests that these are formed by well-understood processes, as indicated by such findings as their being partial melt residues rather than cumulates and their forming in a large chondritic body with heterogeneous O isotopic composition. Slow diffusion of the O in solid and molten silicates ensured that partial melting did not homogenize the O isotopes of the residues. These and other determinations furnish a plausible origin for ureilites as residues from the partial melting of isotopically heterogeneous chondritic material.

Scott, Edward R. D.↗
NASA NTRS2000

Aladdin: Exploration and Sample Return from the Moons of Mars

Aladdin is a remote sensing and sample return mission focused on the two small moons of Mars, Phobos and Deimos. Understanding the moons of Mars will help us to understand the early history of Mars itself. Aladdin's primary objective is to acquire well documented, representative samples from both moons and return them to Earth for detailed analyses. Samples arrive at Earth within three years of launch. Aladdin addresses several of NASA's highest priority science objectives: the origin and evolution of the Martian system (one of two silicate planets with satellites) and the composition and nature of small bodies (the building blocks of the solar system). The Aladdin mission has been selected as a finalist in both the 1997 and 1999 Discovery competitions based on the high quality of science it would accomplish. The equivalent of Aladdin's Phase A development has been successfully completed, yielding a high degree of technical maturity. Aladdin uses an innovative flyby sample acquisition method, which has been validated experimentally and does not require soft landing or anchoring. An initial phasing orbit at Mars reduces mission propulsion requirements, enabling Aladdin to use proven, low-risk chemical propulsion with good mass margin. This phasing orbit is followed by a five month elliptical mission during which there are redundant opportunities for acquisition of samples and characterization of their geologic context using remote sensing. The Aladdin mission is a partnership between Brown University, the Johns Hopkins University Applied Physics Laboratory, Lockheed Martin Astronautics, and NASA Johnson Space Center.

Pieters, C.↗
NASA NTRS1999

Spectroscopic Observations of the Planets

The research supported by this grant has focused on isotopic ratios in comets and in the atmosphere of Titan, and the determinations of surface compositions of outer solar system bodies.

Owen, Tobias C.↗
NASA NTRS2005

Classification of Ion Mobility Data Using the Neural Network Approach

Determination of atmospheric and surface elemental and molecular composition of various solar system bodies is essential to the development of a firm understanding of the origin and evolution of the solar system. Furthermore, such data is needed to address the intriguing question of whether or not life exists or once existed elsewhere in the Solar System. As such, these measurements are among the primary scientific goals of NASA s current and future planetary missions. In recent years, significant progress toward both miniaturization and field portability of in situ analytical separation and detection devices have been made with future planetary explorations in mind. However, despite all these advances, accurate in situ identification of atmospheric and surface compounds remains a big challenge. In response to that we are developing various hardware and software tools which would enable us to uniquely identify species of interest in a complex chemical environment.

Duong, T. A.↗
NASA NTRS2005

Mass Spectrometry for Planetary Probes: Past, Present and Future

Atmospheric entry probes present a unique opportunity for performing quantitative analysis of extra-terrestrial atmospheres in cases where remote sensing alone may not be sufficient and measurements with balloons or aircraft is not practical. An entry probe can provide a complete vertical profile of atmospheric parameters including chemical composition, which cannot be obtained with most other techniques. There are, however, unique challenges associated with building instruments for an entry probe, as compared to orbiters, landers, or rovers. Conditions during atmospheric entry are extreme, there are inherent time constraints due to the short duration of the experiment, and the instrument experiences rapid environmental changes in temperature and pressure as it descends. In addition, there are resource limitations, i.e. mass, power, size and bandwidth. Finally, the demands on the instrument design are determined in large part by conditions (pressure, temperature, composition) unique to the particular body under study, and as a result there is no one-size-fits-all instrument for an atmospheric probe. Many of these requirements can be more easily met by miniaturizing the probe instrument. Our experience building mass spectrometers for atmospheric entry probes leads us to believe that the time is right for a fundamental change in the way spaceflight mass spectrometers are built. The emergence over the past twenty years of Micro-electro- mechanical Systems (MEMS), utilizing lithographic semiconductor fabrication techniques to produce instrument systems in miniature, holds great promise for application to spaceflight mass spectrometry. A highly miniaturized, high performance and low-power mass spectrometer would be an enormous benefit to future entry probe missions, allowing, for example, parallel measurements (e.g., multiple simultaneous gas chromatographic analyses and direct atmospheric leaks.) Such an instrument would also enable mass spectrometry on board small multiple entry probes. In the development of a MEMS Mass Spectrometer, the challenge facing us is to move beyond the proof-of-concept, where research dollars tend to focus, and carry out the detailed work of developing a high performance mass spectrometer system on a chip which meets the unique technical requirements for an atmospheric entry probe described above.

Niemann, Hasso B.↗
NASA NTRS2007

A Conceptual Aerospace Vehicle Structural System Modeling, Analysis and Design Process

A process for aerospace structural concept analysis and design is presented, with examples of a blended-wing-body fuselage, a multi-bubble fuselage concept, a notional crew exploration vehicle, and a high altitude long endurance aircraft. Aerospace vehicle structures must withstand all anticipated mission loads, yet must be designed to have optimal structural weight with the required safety margins. For a viable systems study of advanced concepts, these conflicting requirements must be imposed and analyzed early in the conceptual design cycle, preferably with a high degree of fidelity. In this design process, integrated multidisciplinary analysis tools are used in a collaborative engineering environment. First, parametric solid and surface models including the internal structural layout are developed for detailed finite element analyses. Multiple design scenarios are generated for analyzing several structural configurations and material alternatives. The structural stress, deflection, strain, and margins of safety distributions are visualized and the design is improved. Over several design cycles, the refined vehicle parts and assembly models are generated. The accumulated design data is used for the structural mass comparison and concept ranking. The present application focus on the blended-wing-body vehicle structure and advanced composite material are also discussed.

Mukhopadhyay, Vivek↗
NASA NTRS2013

Geologic Interpretation of Data Sets Collected by Planetary Analog Geology Traverses and by Standard Geologic Field Mapping: A Comparison Study - Part 1

Geologic maps integrate the distributions, contacts, and compositions of rock and sediment bodies as a means to interpret local to regional formative histories. Applying terrestrial mapping techniques to other planets is challenging because data is collected primarily by orbiting instruments, with infrequent, spatiallylimited in situ human and robotic exploration. Although geologic maps developed using remote data sets and limited "Apollo-style" field access likely contain inaccuracies, the magnitude, type, and occurrence of these are only marginally understood. This project evaluates the interpretative and cartographic accuracy of both field- and remote-based mapping approaches by comparing two 1:24,000 scale geologic maps of the San Francisco Volcanic Field (SFVF), north-central Arizona. The first map is based on traditional field mapping techniques, while the second is based on remote data sets, augmented with limited field observations collected during NASA Desert Research & Technology Studies (RATS) 2010 exercises. The RATS mission used Apollo-style methods not only for pre-mission traverse planning but also to conduct geologic sampling as part of science operation tests. Cross-comparison demonstrates that the Apollo-style map identifies many of the same rock units and determines a similar broad history as the field-based map. However, field mapping techniques allow markedly improved discrimination of map units, particularly unconsolidated surficial deposits, and recognize a more complex eruptive history than was possible using Apollo-style data. Further, the distribution of unconsolidated surface units was more obvious in the remote sensing data to the field team after conducting the fieldwork. The study raises questions about the most effective approach to balancing mission costs with the rate of knowledge capture, suggesting that there is an inflection point in the "knowledge capture curve" beyond which additional resource investment yields progressively smaller gains in geologic knowledge.

Eppler, Dean B.↗
NASA NTRS2014

Mass Dependency of Isotope Fractionation of Gases Under Thermal Gradient and Its Possible Implications for Planetary Atmosphere Escaping Process

Physical processes that unmix elements/isotopes of gas molecules involve phase changes, diffusion (chemical or thermal), effusion and gravitational settling. Some of those play significant roles for the evolution of chemical and isotopic compositions of gases in planetary bodies which lead to better understanding of surface paleoclimatic conditions, e.g. gas bubbles in Antarctic ice, and planetary evolution, e.g. the solar-wind erosion induced gas escaping from exosphere on terrestrial planets.. A mass dependent relationship is always expected for the kinetic isotope fractionations during these simple physical processes, according to the kinetic theory of gases by Chapman, Enskog and others [3-5]. For O-bearing (O16, -O17, -O18) molecules the alpha O-17/ alpha O-18 is expected at 0.5 to 0.515, and for S-bearing (S32,-S33. -S34, -S36) molecules, the alpha S-33/ αlpha S-34 is expected at 0.5 to 0.508, where alpha is the isotope fractionation factor associated with unmixing processes. Thus, one isotope pair is generally proxied to yield all the information for the physical history of the gases. However, we recently] reported the violation of mass law for isotope fractionation among isotope pairs of multiple isotope system during gas diffusion or convection under thermal gradient (Thermal Gradient Induced Non-Mass Dependent effect, TGI-NMD). The mechanism(s) that is responsible to such striking observation remains unanswered. In our past studies, we investigated polyatomic molecules, O2 and SF6, and we suggested that nuclear spin effect could be responsible to the observed NMD effect in a way of changing diffusion coefficients of certain molecules, owing to the fact of negligible delta S-36 anomaly for SF6.. On the other hand, our results also showed that for both diffusion and convection under thermal gradient, this NMD effect is increased by lower gas pressure, bigger temperature gradient and lower average temperature, which indicate that the nuclear spin effect may not be the significant contributor as the energies involved in the hyperfine effect are much smaller than those with molecular collisions, especially under convective conditions.

Sun, Tao↗
NASA NTRSDate not supplied

TPSAS-NF1676L-15201-DND

X33 Key Facts: - Technology demonstration program - Single stage to orbit vehicle - Affordable access to low earth orbit - Competition among three companies (3/95) - Lockheed Martin (LM) Skunk Works won (4/96) ambitious plan to develop multiple technologies - Metallic Thermal Protection System - Aerospike Engine - Lifting Body Control - New Contracting Model - Composite Cryotank

James Reeder↗
NASA NTRSDate not supplied

Standard Measures During Spaceflight

The key goal of the Spaceflight Standard Measures project is to ensure that a set of measures, representing the Human Research Program’s key risks and acquired with minimal impact on time and resources, is consistently captured from crewmembers through the end of the International Space Station (ISS) Program. Data collected under the Spaceflight Standard Measures project include assessments of sleep/wake cycles, cognition, immune status and function, general blood and urine chemistry (urine is collected only before flight and after landing), microbiome composition (gastrointestinal tract, saliva, and body surface), cardiovascular structure and function (carotid intima-media thickness, orthostatic responses), sensorimotor function, and team processes. Data is collected once or twice before the flight (180 and 90 days before launch), twice during the 6-month missions (fight day 30 and 30 days before return to Earth) with the exception of actigraphy, which is recorded continuously during the mission, and during two-week periods before and after the mission. In this presentation, we will review the data collected to date on twelve ISS crew members. These data are placed in the NASA Life Sciences Data Archive and are available for occupational surveillance (using non-identifiable data) Institutional Review Board-approved data sharing requests, and retrospective data requests. This data repository enables high-level monitoring of the effectiveness of countermeasures and meaningful interpretation of health and performance outcomes for various mission durations. The knowledge gained from this project informs and supports future hypothesis-driven research that will enable the success of planetary missions.

G R Clement↗
NASA NTRSDate not supplied

Characterization of NU-LHT-4M Lunar Regolith Simulant Using Different Raman Configurations

As much as possible, structures to help sustain a long-term human presence on the moon will be constructed via in-situ resource utilization (ISRU) from lunar regolith. Various processes have been proposed to make lunar regolith-based construction materials, but one complication is that the lunar regolith is relatively complex in terms of composition and can vary quite significantly from one site to another. Some of these methods to make lunar regolith-based construction materials are quite sensitive to the composition and so in-situ methods for evaluating the composition of the lunar regolith could be critical. Various analytical instrumentation has been proposed for in-situ characterization of the composition of regolith on planetary bodies. Raman spectroscopy has been suggested and has some advantages over other in-situ techniques, such as potential for relatively high spatial resolution, direct determination of the mineralogy (while other methods may only infer the mineralogy), nondestructive analysis, relatively simple instrument configurations, and minimal sample preparation/handling. For example, Raman instrumentation has already been deployed in rover-based missions to Mars. Previously, we developed the Standoff Ultracompact Micro-Raman Sensor (SUCR), which is a portable Raman spectroscopy instrument capable to be integrated into a rover or onto a lander. Here, we present work on Raman spectroscopy measurements of NU-LHT-4M lunar simulant using three different Raman instruments with different configurations for collecting Raman data with the goal to explore the effect of these different configurations on the results, especially for use in a lunar environment.

Raman Spectroscopy↗
NASA NTRSDate not supplied

Standard Measures During Spaceflight

The goal of the Spaceflight Standard Measures project is to ensure that a set of measures, representing the Human Research Program’s key risks and acquired with minimal impact on time and resources, is consistently captured from crewmembers through the end of the International Space Station (ISS) Program. Data collected under the Spaceflight Standard Measures project include assessments of sleep/wake cycles, cognition, immune status and function, general blood and urine chemistry (urine is collected only before flight and after landing), microbiome composition (gastrointestinal tract, saliva, and body surface), cardiovascular structure and function (carotid intima-media thickness, orthostatic responses), sensorimotor function, sleep quality, and team processes. Data is collected once or twice before the flight (180 and 90 days before launch), twice during the 6-month missions (flight day 30 and 30 days before return to Earth) with the exception of actigraphy, which is recorded during two-week periods before, during, and after the mission. In this presentation, we will review the data collected to date on 31 ISS crewmembers. These data are placed in the NASA Life Sciences Portal (NLSP) and are available for occupational surveillance (using non-identifiable data), Institutional Review Board-approved data sharing requests, and retrospective data requests. This data repository enables high-level monitoring of the effectiveness of countermeasures and meaningful interpretation of health and performance outcomes for various mission durations. The knowledge gained from this project informs and supports future hypothesis-driven research that will enable the success of planetary missions.

G R Clement↗
NASA NTRS2024

Secondary Textures in Brecciated Basaltic Eucrite MIL 11290

Basaltic eucrites originate from the upper crust of their parent body, likely asteroid 4-Vesta. This largely intact protoplanet has undergone differentiation and therefore provides insights into early planetary processes. Radiogenic chronometers indicate rapid planetary differentiation within <10 Ma of solar system formation and a period of magmatism spanning as much as 50 million years. An extensive history of impacts prior to about 3.1 Ga significantly modified many materials derived from the eucrite parent body. Therefore, eucrites display diverse igneous to metamorphic textures formed by endogenous crustal processes and impacts. Their mineralogy is dominantly composed of plagioclase, pigeonite, and augite with minor to accessory phases including silica, ilmenite, spinel, Ca-phosphates, olivine, zircon, Ni-poor metal, and potassium feldspar. Although there are abundant achondrites originating from 4-Vesta, the geologic history of the body is not well understood. Better constraining the igneous textures and chemistry in basaltic eucrites are necessary to follow the magmatic evolution and impact history of this planetary body. This study characterizes the composition, textures, and age of a basaltic eucrite through techniques such as electron microscopy, geochemistry, and geochronology to add to our understanding of early planetary formation.

meteorite↗
NASA NTRS2012

Laser Ablation Mass Spectrometer (LAMS) as a Standoff Analyzer in Space Missions for Airless Bodies

A laser ablation mass spectrometer (LAMS) based on a time-of-flight (TOF) analyzer with adjustable drift length is proposed as a standoff elemental composition sensor for space missions to airless bodies. It is found that the use of a retarding potential analyzer in combination with a two-stage reflectron enables LAMS to be operated at variable drift length. For field-free drift lengths between 33 cm to 100 cm, at least unit mass resolution can be maintained solely by adjustment of internal voltages, and without resorting to drastic reductions in sensitivity. Therefore, LAMS should be able to be mounted on a robotic arm and analyze samples at standoff distances of up to several tens of cm, permitting high operational flexibility and wide area coverage of heterogeneous regolith on airless bodies.

Li, X.↗
NASA NTRS2016

Examining Metasomatism in Low fO2 Environments: Exploring Sulfidation Reactions in Various Planetary Bodies

Hydrothermal systems are common on Earth in a variety of tectonic environments and at different temperature and pressure conditions. These systems are commonly dominated by H2O, and they are responsible for element transport and the production of ore deposits. Unlike the Earth (fO2~FMQ), many other planetary bodies (e.g., Moon and asteroids) have fO2 environments that are more reduced (IW+/-2), and H2O is not the important solvent responsible for element transport. One example of a texture that could result from element transport and metasomatism, which appears to occur on numerous planetary bodies, is sulfide-silicate intergrowths. These subsolidus assemblages are interpreted to form as a result of sulfidation reactions from a S-rich fluid phase. The composition of fluids may vary within and among parent bodies and could be sourced from magmatic (e.g. Moon) or impact processes (e.g. HED meteorites and Moon). For example, it has been previously demonstrated on the Moon that the interaction of olivine with a hydrogen- and sulfur-bearing vapor phase altered primary mineral assemblages, producing sulfides (e.g. troilite) and orthopyroxene. Formation of these types of "sulfidation" assemblages can be illustrated with the following reaction: Fe2SiO4(ol) + 1/2 S(2 system) = FeS(troi)+ FeSiO3(opx) + 1/2 O2 system. The products of this reaction, as seen in lunar rocks, is a vermicular or "worm-like" texture of intergrown orthopyroxene and troilite. Regardless of the provenance of the S-bearing fluid, the minerals in these various planetary environments reacted in the same manner to produce orthopyroxene and troilite. Although similar textures have been identified in a variety of parent bodies, a comparative study on the compositions and the origins of these sulfide-silicate assemblages has yet to be undertaken. The intent of this study is to examine and compare sulfide-silicate intergrowths from various planetary bodies to explore their petrogenesis and examine the nature of low fO2 (IW+/-2) element migration and sulfidation reactions.

Srinivasan, P.↗
NASA NTRS1990

New tests of the gravitational redshift effect

Tests of the gravitational redshift effect provide a way to check the validity of the Einstein Equivalence Principle (EEP) and, more specifically, of general relativity. If the EEP is valid, then the redshift should be the same for different clocks. Also, according to general relativity, the redshift should depend upon only the total mass of a gravitating body without reference to its detailed composition. These predictions have been tested mainly in the gravitational field of the earth. It is now possible to measure, with space probes, the redshift effect to good accuracy in the vicinity of other bodies in the solar system, in particular at the massive outer planets. The present and future status of these experiments is discussed.

Krisher, Timothy P.↗