Search NASA⌕ Search

SEARCH · Search NASA

Results for “CALCINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Immobilizing of ZIF-8 derived ZnO with controllable morphologies on zeolite A for efficient photocatalysis

ZIF-8@Zeolite A (ZIF-8@Z) catalysts were successfully prepared by sonochemical synthesizing method using metal organic frameworks as precursors and zeolite A as support. Then, ZIF-8@Z catalysts were transformed into ZnO@Zeolite A (ZnO@Z) photocatalysts by calcining at different temperatures to remove the organic functional groups of ZIF-8. All samples were characterized by XRD, SEM, BET and UV–vis diffuse reflectance spectra respectively. SEM images show that ZIF-8 nanoparticles were tightly loaded on the surface of zeolite A. The XRD patterns exhibit that ZIF-8 was transformed into ZnO. The photocatalysis of ZnO@Z was investigated by degradation of rhodamine B (RhB) aqueous solution under UV light and ZnO@Z exhibited rapider photodegradation of RhB than porous ZnO derived from ZIF-8. The degradation of RhB reveals that ZnO@Z, calcined at 550 °C for 5 h, (ZnO@Z550) shows the highest photocatalytic efficiency (99.4%). - Graphical abstract: Schematic Illustration of the Preparation of the ZnO@Z via Sonochemical Synthesis. Display Omitted - Highlights: • Hybrid structure of ZIF-8 derived ZnO loaded on Zeolite A is first obtained. • ZnO@Z hybrid show higher photocatalytic activity on RhB than ZnO. • The preparation is facile, cheap and easily to scale-up.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and dielectric properties of Li{sub 2}O-doped TiO{sub 2}

The dielectric properties of the system Li-Ti-O have been exploited in the frequency range 20 Hz-1 MHz in order to obtain permittivity data of materials having high-{kappa}' and low loss. Doping of titanium dioxide with lithium oxide acts as a strong promoter of the anatase to rutile phase transition and it may reduce the phase transition temperature (915 deg. C) by more than 100 deg. C, possibly due to induced oxygen concentration disorders in the ternary Li-Ti-O system. For TiO{sub 2}:Li{sub 2}O molar ratios of 98.92:1.08 and calcination temperature of 950 deg. C the resulting material exhibits high-{kappa}' and low-loss permittivity properties with lack of interfacial polarization effects. Its dielectric response is superior compared to pure (undoped) rutile as obtained by calcination at much higher temperatures (1180 deg. C).

36 MATERIALS SCIENCE↗

A facile method to fabricate porous Co{sub 3}O{sub 4} hierarchical microspheres

Flower-like Co{sub 3}O{sub 4} hierarchical microspheres composed of self-assembled porous nanoplates have been prepared by a two-step method without employing templates. The first step involves the synthesis of flower-like Co(OH){sub 2} microspheres by a solution route at low temperatures. The second step includes the calcination of the as-prepared Co(OH){sub 2} microspheres at 200 deg. C for 1 h, causing their decomposition to form porous Co{sub 3}O{sub 4} microspheres without destruction of their original morphology. The samples were characterized by scanning electron microscope, transmission electron microscope, X-ray diffractormeter and Fourier transform infrared spectroscope. Some experimental factors including solution temperature and surfactant on the morphologies of the final products have been investigated. The magnetic properties of Co{sub 3}O{sub 4} microspheres were also investigated. - Graphical Abstract: Flower-like Co{sub 3}O{sub 4} microspheres are composed of self-assembled nanoplates and these nanoplates appear to be closely packed in the microspheres. These nanoplates consist of a large number of nanocrystallites less than 5 nm in size with a porous structure, in which the connection between nanocrystallites is random. Research Highlights: {yields} Flower-like Co{sub 3}O{sub 4} hierarchical microspheres composed of self-assembled porous nanoplates have been prepared by a two-step method without employing templates. {yields} Layered Co(OH){sub 2} microspheres were prepared with an appropriate approach under low temperatures for 1 h reaction. {yields} Calcination caused Co(OH){sub 2} decomposition to form porous Co{sub 3}O{sub 4} microspheres without destruction of their original morphology.

36 MATERIALS SCIENCE↗

CoTiO{sub 3} via cobalt oxalate-TiO{sub 2} precursor. Synthesis and characterization

Purely trigonal ilmenite type powder; CoTiO{sub 3} was successfully synthesized through the thermal decomposition of CoC{sub 2}O{sub 4}{center_dot}2H{sub 2}O-TiO{sub 2} precursor. The decomposition course was followed using differential thermal analysis-thermogravimetry measurements and the intermediate decomposition products as well as the titanate product were characterized using X-ray diffraction, Fourier transform infrared, transmission electron microscopy techniques. Thermal analysis study indicated that, the intermediate decomposition product; Co{sub 3}O{sub 4} decomposed endothermically into CoO at 963 Degree-Sign C with instantaneous formation of CoTiO{sub 3}. X-ray diffraction of the powder calcined at 950 Degree-Sign C showed characteristic lines for Co{sub 2}TiO{sub 4} besides secondary phase of rutile-TiO{sub 2}, which are disappeared by rising the calcination temperature to 1000 Degree-Sign C. Transmission electron microscopy image of CoTiO{sub 3} powder exhibit weak agglomerated particles with heterogeneous morphology in both shape and dimensions. Type II adsorption isotherm estimated using Brunauer-Emmett-Teller procedure indicated a very high specific surface area of 29.7 m{sup 2} g{sup -1}. Electrical properties of CoTiO{sub 3} measured as a function of temperature and frequency showed a semiconducting behavior at high temperatures with conduction activation energy of 0.73 eV. Kinetic analysis of the non-isothermal thermogravimetry curves, using different computational methods, illustrated that the random nucleation and growth mechanisms are the predominant one. - Graphical Abstract: The figure showed the variation of dielectric constant ({epsilon} Prime ) for CoTiO{sub 3} with temperature at different frequencies. {epsilon} Prime appeared to be temperature and frequency independent at low temperatures. By increasing the temperature, the orientation polarization plays a significant role and a gradual increase of {epsilon} Prime occurred. Highlights: Black-Right-Pointing-Pointer CoTiO{sub 3} was synthesized through decomposition of CoC{sub 2}O{sub 4}{center_dot}2H{sub 2}O-TiO{sub 2} precursor. Black-Right-Pointing-Pointer XRD, FT-IR, TEM techniques are used to characterize decomposition course. Black-Right-Pointing-Pointer Specific surface area of 29.7 m{sup 2} g{sup -1} was obtained. Black-Right-Pointing-Pointer The prepared titanate showed semiconducting behavior.

36 MATERIALS SCIENCE↗

A melting-like process and the local structures during the anatase-to-rutile transition

Highlights: • The maximum size of anatase crystallites is more useful to describe the phase stability than the traditional critical size. • The melting-like process accelerates the phase transition from anatase to rutile. • The cis-coordinated anatase is transformed to trans-coordinated rutile by torsion & rotation of TiO{sub 6} octahedra in anatase. Phase transition of titanium oxide from anatase to rutile was investigated by using transmitted electron microscope (TEM), scanning electron microscope (SEM) and X-ray diffraction (XRD), in combination with the atomic pair distribution function (PDF) technique. The transition range is about 528–805 °C and the critical size is ~73 nm for the sol-gel samples calcined for 6 h. A melting-like process was evidently observed in the transition samples by SEM and it will speed up the phase transition. PDF reveals that anatase crystallites are packed by neighbouring TiO{sub 6} octahedra in a cis-coordinated way. Anatase crystallites larger than the critical size will be unstable and transform into rutile in a trans-coordinated way by torsion and rotation of part of octahedra and it will rapidly spread the entire crystallites driven by a melting-like process. We suggest the maximum size of anatase will be more technically useful for the description of the phase stability from anatase to rutile because unstable small anatase crystals are consumed during longer calcination process to grow the larger anatase crystals.

36 MATERIALS SCIENCE↗

Adsorption of vitamin E on mesoporous titania nanocrystals

Tri-block nonionic surfactant and titanium chloride were used as starting materials for the synthesis of mesoporous titania nanocrystallite powders. The main objective of the present study was to examine the synthesis of mesoporous titania nanocrystals and the adsorption of vitamin E on those nanocrystals using X-ray diffraction (XRD), transmission electron microscopy, and nitrogen adsorption and desorption isotherms. When the calcination temperature was increased to 300 {sup o}C, the reflection peaks in the XRD pattern indicated the presence of an anatase phase. The crystallinity of the nanocrystallites increased from 80% to 98.6% with increasing calcination temperature from 465 {sup o}C to 500 {sup o}C. The N{sub 2} adsorption data and XRD data taken after vitamin E adsorption revealed that the vitamin E molecules were adsorbed in the mesopores of the titania nanocrystals.

36 MATERIALS SCIENCE↗

Studies on nitrogen modified TiO{sub 2} photocatalyst prepared in different conditions

Nitrogen modified titania photocatalysts (TiO{sub 2}/N) were characterized using high resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), dynamic light scattering (DLS), Raman spectroscopy and BET surface area method. The presence of nitrogen in modified photocatalysts has been studied using FT-IR and XPS analyses. The influence of the calcination temperature in the range of 100-350 {sup o}C on nanocrystallite as well as particle size of the samples and their photocatalytic activity was investigated. The calcination of TiO{sub 2}/N samples caused a growth of the particle size and an increase of their crystallinity. TEM studies present changes of the diameter and shape of TiO{sub 2} particles and nanocrystallites. The XRD and the Raman response of the samples confirmed an increase of the crystallinity of the samples when annealed at higher temperatures. The photocatalytic activity of the modified photocatalysts was determined using the reaction of phenol decomposition. It was shown that phenol decomposition rate was greatly influenced by pH of the solution. The highest phenol degradation using all the modified samples was observed for pH 7.1 which is close to the PZC point established for pristine TiO{sub 2} at pH 6.8.

36 MATERIALS SCIENCE↗

Sol-gel synthesis, structure and photoluminescence properties of nanocrystalline Lu{sub 2}MoO{sub 6}:Eu

Highlights: {yields} Monoclinic-structural Lu{sub 2}MoO{sub 6} has strong absorption of near-UV light. {yields} The absorbed energy can be transferred from MoO{sub 5} groups to doped Eu{sup 3+} and luminescence. {yields} The absorption edge and the peak of the MoO{sub 5} excitation band shift in reverse ways. {yields} The decline of the crystallinity and the introduced defect respond for the variation. -- Abstract: In this paper, we reported the obtention of Eu{sup 3+} ion doped Lu{sub 2}MoO{sub 6} powders synthesized by a sol-gel method, and followed by annealing at different temperatures. The structure and photoluminescence properties of these powders were investigated. The X-ray diffraction pattern suggests that Lu{sub 2}MoO{sub 6} powder has a monoclinic structure. It was observed that the UV-visible and photoluminescence spectra of Lu{sub 2}MoO{sub 6}:Eu nanocrystallines varied systematically with the calcination temperature. The near-UV absorption edge shifts to long wavelength direction with the decreasing of the calcination temperature, while the peak of MoO{sub 5} excitation band shifts in an opposite way. The decline of the crystallinity and the introduced lattice defect were considered to respond for these variations. Additionally, due to the efficient red light emission under near-UV light excitation, the powder can be a candidate as red phosphor for white-light-emitting diodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of FeVO{sub 4} nanoparticles

Highlights: {yields} Simple co-precipitation method were employed for the synthesis of FeVO{sub 4}. {yields} The calcination temperature and the reaction time were optimized. {yields} The effect of surfactants on the structural, morphological and magnetic properties was studied. {yields} The shape of the particles changes due to the effect of surfactant. {yields} Enhancement of magnetic orderings on the addition of surfactant. -- Abstract: Iron vanadate (FeVO{sub 4}) nanoparticles were synthesized by simple co-precipitation method using various surfactants such as ethylene glycol, polyethylene glycol 200 and polyethylene glycol 400 as the structure directing agents. Systematic investigations on the structural, morphological and magnetic properties of the materials have been studied. The lattice constants of the triclinic structure of FeVO{sub 4} were calculated from the X-ray diffraction (XRD) analyses. The average grain size was estimated to be around 35 nm, which increased with increasing the calcination temperature. The stretching and bending vibrations of Fe-O were evaluated from the FT-IR spectra. Using VSM magnetometer, magnetic property was investigated through magnetic susceptibility and magnetization measurements. FeVO{sub 4} exhibits two magnetic ordering temperatures at T {approx} 20 K and 14 K, which is due to two different chemical environments of Fe ligands such as octahedral FeO{sub 6} and trigonal bipyramidal FeO{sub 5} in a six-column doubly bent chain, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Y{sub 2}O{sub 3}:Yb/Er nanotubes: Layer-by-layer assembly on carbon-nanotube templates and their upconversion luminescence properties

Graphical abstract: Well-shaped Y{sub 2}O{sub 3}:Yb/Er nanotubes have been successfully synthesized on a large scale via layer-by-layer assembly on carbon nanotubes templates followed by a subsequent heat treatment process. The as-prepared Y{sub 2}O{sub 3}:Yb/Er nanotubes show a strong red emission corresponding to the {sup 4}F{sub 9/2}–{sup 4}I{sub 15/2} transition of the Er{sup 3+} ions under excitation at 980 nm. Display Omitted Highlights: ► Well-shaped Y{sub 2}O{sub 3}:Yb/Er nanotubes have been successfully synthesized. ► CNTs were used as templates for Y{sub 2}O{sub 3}:Yb/Er nanotubes. ► LBL assembly and calcination were used for preparation of Y{sub 2}O{sub 3}:Yb/Er nanotubes. ► The as-prepared Y{sub 2}O{sub 3}:Yb/Er nanotubes show a strong red emission. -- Abstract: Well-shaped Y{sub 2}O{sub 3}:Yb/Er nanotubes have been successfully synthesized on a large scale via layer-by-layer (LBL) assembly on carbon nanotubes (CNTs) templates followed by a subsequent heat treatment process. The crystal structure, element analysis, morphology and upconversion luminescence properties were characterized. XRD results demonstrate that the diffraction peaks of the samples calcinated at 800 °C or above can be indexed to the pure cubic phase of Y{sub 2}O{sub 3}. SEM images indicate that a large quantity of uniform and rough nanotubes with diameters of about 30–60 nm can be observed. The as-prepared Y{sub 2}O{sub 3}:Yb/Er nanotubes show a strong red emission corresponding to the {sup 4}F{sub 9/2}–{sup 4}I{sub 15/2} transition of the Er{sup 3+} ions under excitation at 980 nm, which have potential applications in such fields as nanoscale devices, molecular catalysts, nanobiotechnology, photonics and optoelectronics.

36 MATERIALS SCIENCE↗

Influence of halide flux on the crystallinity, microstructure and thermoluminescence properties of CdSiO{sub 3}:Co{sup 2+} nanophosphor

Graphical abstract: TL glow curves of CdSiO{sub 3}:Co{sup 2+} different alkali flux (inset without adding flux). Display Omitted Highlights: ► CdSiO{sub 3}:Co{sup 2+} (1–7 mol%) nanocrystalline phosphors synthesized by combustion route. ► Flux effect on thermoluminescence behavior of CdSiO{sub 3}:Co{sup 2+} reported for first time. ► Addition of 2 wt% of flux would drastically enhance the TL properties. ► Well resolved single glow peak at ∼170 °C was recorded for all the samples. ► Among all the alkali flux, NaCl shows highest TL peak intensity. -- Abstract: CdSiO{sub 3}:Co{sup 2+} (1–7 mol %) nanophosphors have been prepared via solution combustion method with post calcination at 800 °C for 2 h for the first time. The formation of expected monoclinic phase was investigated by Powder X-ray diffraction (PXRD) measurements. The effect of different fluxes like NaF, NaCl, NH{sub 4}F and NH{sub 4}Cl on the crystallinity, phase and morphology of CdSiO{sub 3} was investigated in detail. The crystallinity of the samples can be greatly enhanced by using fluxes rather than increasing the calcination temperature. Scanning electronic micrograph (SEM) image shows that the powder morphologies are highly influenced by flux addition. The addition of 2 wt% of fluxes would drastically enhance the crystallinity when NaCl, NH{sub 4}F and NH{sub 4}Cl fluxes are used. A well resolved single thermoluminescent glow peak at ∼170 °C was recorded for all the samples. Among all the halide fluxes, NaCl flux was found to be the potential one in enhancing the TL peak intensity along with crystallinity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solvothermal synthesis of CeF{sub 3}: Er{sup 3+}, Yb{sup 3+} nanoplates with visible upconversion luminescence by 980 nm excitation

Graphical abstract: The visible upconversion emission including blue emission (487 nm), green emissions (523 nm, 546 nm) and red emission (654 nm) of Er{sup 3+}, Yb{sup 3+} in CeF{sub 3} nanoplates was observed under 980 nm excitation. The emission intensity increases remarkably with the increase of Er{sup 3+} content from x = 0.001 to 0.02 and then decreases obviously with the increase of Er{sup 3+} content ranging from x = 0.02 to 0.25. Highlights: ► CeF{sub 3}: Er{sup 3+}, Yb{sup 3+} nanoplates have been successfully synthesized by a solvothermal method with further calcinations. ► The visible upconversion emission of Er{sup 3+}, Yb{sup 3+} in CeF{sub 3} nanoplates was observed and never been reported before. ► The upconversion mechanisms of CeF{sub 3}: Er{sup 3+}, Yb{sup 3+} nanoplates have been investigated. -- Abstract: CeF{sub 3}: Er{sup 3+}, Yb{sup 3+} nanoplates have been successfully synthesized by a solvothermal method with further calcinations. The crystalline phase, size and optical properties were characterized using powder X-ray diffraction (XRD), field emission-scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS), energy dispersive spectroscopy (EDS) and upconversion luminescence (UCL). All the as-prepared samples showed blue emission (487 nm), green emissions (523 nm, 546 nm) and red emission (654 nm) under 980 nm excitation. The main mechanism of upconversion is attributed to the energy transfer (ET) among Yb{sup 3+} and Er{sup 3+} ions in excited states. The results illustrate the large potential of this new class of material for photonic applications involving optoelectronics devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrical property and characterization of nano-SnO{sub 2}/wollastonite composite materials

Graphical abstract: Resistivity as a function of different factors: hydrolysis temperature and time. Highlights: ► We have synthesized nano-tin oxide deposited on the surface of wollastonite. ► The antistatic properties were measured by rubber sheeter and four-point probe (FPP) sheet resistance measurement. ► The results showed that the nano-SnO{sub 2}/wollastonite composite materials showed better antistatic properties. ► The surface of wollastonite fiber was coated with a layer of 10–15 nm thickness of tin oxide grains. - Abstract: Nano-tin oxide was deposited on the surface of wollastonite using the mixed solution including stannic chloride pentahydrate precursor and wollastonite by a hydrolysis precipitation process. The antistatic properties of the wollastonite materials under different calcined conditions and composite materials (nano-SnO{sub 2}/wollastonite, SW) were measured by rubber sheeter and four-point probe (FPP) sheet resistance measurement. Effects of hydrolysis temperature and time, calcination temperature and time, pH value and nano-SnO{sub 2} coating amount on the resistivity of SW powders were studied, and the optimum experimental conditions were obtained. The microstructure and surface properties of wollastonite, precipitate and SW were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDS), specific surface area analyzer (BET), thermogravimetry (TG), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and Fourier translation infrared spectroscopy (FTIR) respectively. The results showed that the nano-SnO{sub 2}/wollastonite composite materials under optimum preparation conditions showed better antistatic properties, the resistivity of which was reduced from 1.068 × 10{sup 4} Ω cm to 2.533 × 10{sup 3} Ω cm. From TG and XRD analysis, the possible mechanism for coating of SnO{sub 2} nanoparticles on the surface of wollastonite was proposed. The infrared spectrum indicated that there were a large number of the hydroxyl groups on the surface of wollastonite. This is beneficial to the heterogeneous nucleation reaction. Through morphology, EDS and XPS analysis, the surface of wollastonite fiber was coated with a layer of 10–15 nm thickness of tin oxide grains the distribution of which was uniform.

36 MATERIALS SCIENCE↗

Broadband anti-reflective and water-repellent coatings on glass substrates for self-cleaning photovoltaic cells

Graphical abstract: High performance broadband antireflective and water-repellent coatings were fabricated on glass substrates, which can improve the short-circuit current of solar cells as much as 6.6% in comparison with glass substrates without the coatings. - Highlights: • Broadband anti-reflective and water-repellent coatings were fabricated. • Transmittance increased to 99.0%, significantly higher than that of commercial solar glasses. • The performance of standard solar cells with the AR coating was enhanced as much as 6.6%. - Abstract: High performance broadband antireflective (AR) and water-repellent coatings were fabricated on glass substrates by assembly of silica nanoparticles and polyelectrolytes via the layer-by-layer (LbL) assembly technique, followed by calcination and hydrophobic modification. A porous poly(diallyladimethylammonium chloride) (PDDA)/20 nm SiO{sub 2} nanoparticles (S-20) multilayer coating with AR property was prepared first. The maximum transmittance is as high as 99.0%, while that of the glass substrate is only 91.3%. After calcination and hydrophobic modification, the coating became water-repellent while maintaining the good AR property. Such water-repellent AR coatings can improve the short-circuit current of solar cells as much as 6.6% in comparison with glass substrates without the coatings. Scanning electron microscopy (SEM) was used to observe the morphology and thickness of coatings. Transmission spectra and reflection spectra were characterized by UV–vis spectrophotometer. The surface wettability was studied by a contact angle/interface system.

36 MATERIALS SCIENCE↗

Synthesis and modification of nano-sized TiO{sub 2} for photo-degradation process under visible light irradiation; a Placket–Burman experimental design

Graphical abstract: - Highlights: • Nanosized TiO{sub 2} doped with nitrogen and iron was produced by sol-gel method. • Linear models were derived to relate the phase and particle size to synthesis factors. • High photocatalytic activity was observed for acetaldehyde degradation. - Abstract: In this research, nitrogen and iron (III) co-doped nano TiO{sub 2} (N-Fe-TiO{sub 2}) was prepared by sol-gel method using ammonium chloride and iron chloride solutions as nitrogen and iron sources, respectively. The effect of synthesis parameters (weight ratios of N/TiO{sub 2} and Fe/TiO{sub 2}, synthesis temperature, calcination time and temperature) was simultaneously investigated on the quality of the N-Fe-TiO{sub 2} product by a two-level Placket–Burman experimental design. The synthesized powders were characterized by XRD, XPS and UV–Vis spectroscopy techniques. The mean crystal size and anatase content were determined and evaluated as the linear functions of so-called synthesis parameters by the statistical analysis and regression. The 2%N-1%Fe-TiO{sub 2} product by 11 nm mean crystal size and 78% anatase content, synthesized at 35 °C and calcined at 500 °C during 2 h, exhibited the most significant activity during the photo-degradation of acetaldehyde under visible light irradiation and its efficiency was obtained about four times more than photocatalytic activity of Degussa TiO{sub 2}-P25.

36 MATERIALS SCIENCE↗

A facile preparation and the luminescent properties of Eu{sup 3+}-doped Y{sub 2}O{sub 2}SO{sub 4} nanopieces

Graphical abstract: - Highlights: • Y{sub 2}O{sub 2}SO{sub 4}:Eu{sup 3+} nanopieces were prepared via electrospinning followed by calcination. • The photoluminescence of Y{sub 2}O{sub 2}SO{sub 4}:Eu{sup 3+} nanopieces were investigated. • The Y{sub 2}O{sub 2}SO{sub 4}:Eu{sup 3+} was compared to nanoribbons and commercial Y{sub 2}O{sub 3}:Eu{sup 3+}. • The potential applications of the nanopieces and the facile method are suggested. - Abstract: The europium(III)-doped yttrium oxysulfate (Y{sub 2}O{sub 2}SO{sub 4}:Eu{sup 3+}) nanopieces have been prepared via electrospinning followed by calcination at 1000 °C in mixed gas of sulfur dioxide and air. Based on the experimental results, a possible formation mechanism for the nanopieces is that the nanopieces are determined by the directing template of electrospun nanoribbons and the multilayer crystal structure of Y{sub 2}O{sub 2}SO{sub 4}. Besides, the nanopieces show excellent luminescent properties with emissions at 581, 589, 597, 653, 619, and 697 nm resulting from the {sup 5}D{sub 0} → {sup 7}F{sub J} (J = 0, 1, 2, 3, 4) transition of Eu{sup 3+}. The peaks of charge transfer and {sup 5}D{sub 0} → {sup 7}F{sub 2} transition of Eu{sup 3+} obviously have red shifts comparing to those of both Y{sub 2}O{sub 3}:Eu{sup 3+} nanoribbons and commercial Y{sub 2}O{sub 3}:Eu{sup 3+}. Moreover, the nanopieces exhibit stronger intensities than the Y{sub 2}O{sub 3}:Eu{sup 3+} in excitation and emission spectra. Concentration quenching in the nanopieces occurs when Eu{sup 3+} concentration is 11 mol%, indicating that the nanopieces have an optimum luminescent intensity under this doping concentration.

36 MATERIALS SCIENCE↗

Study of Maxwell–Wagner (M–W) relaxation behavior and hysteresis observed in bismuth titanate layered structure obtained by solution combustion synthesis using dextrose as fuel

Graphical abstract: X-ray diffraction studies show that phase formation and crystallinity was reached only after calcinations at 800 °C. Dielectric constant versus temperature curve shows ferroelectric to paraelectric transition temperature (T{sub c}) to be 650 °C. Complex impedance curves show deviation from Debye behavior. The material shows a thin PE Loop with low remnant polarization due to high conductivity in the as prepared sample. - Highlights: • Bi{sub 4}Ti{sub 3}O{sub 12} is synthesized using solution combustion technique with dextrose as fuel. • Dextrose has high reducing capacity (+24) and generates more no. of moles of gases. • Impedance studies show that the sample follows Maxwell–Wagner relaxation behavior. • Shows lower remnant polarization due to higher c-axis ratio. - Abstract: Structural, dielectric and ferroelectric properties of bismuth titanate (Bi{sub 4}Ti{sub 3}O{sub 12}) obtained by solution combustion technique using dextrose as fuel is studied extensively in this paper. Dextrose is used as fuel as it has high reducing valancy and generates more number of moles of gases during the reaction. X-ray diffraction studies show that phase formation and crystallinity was reached only after calcinations at 800 °C. Dielectric constant versus temperature curve shows ferroelectric to paraelectric transition temperature (T{sub c}) to be 650 °C. The dielectric loss is very less (tan δ < 1) at lower temperatures but increases around T{sub c} due to structural changes in the sample. Complex impedance curves show deviation from Debye behavior. The material shows a thin PE Loop with low remnant polarization due to high conductivity in the as prepared sample.

36 MATERIALS SCIENCE↗

Porous acicular mullite obtained by controlled oxidation of waste molybdenum disilicide

Highlights: • Waste MoSi{sub 2} heating elements were used as starting material for fabrication of porous acicular mullite. • Calcined MoSi{sub 2} powder was source of SiO{sub 2} and pore former at the same time. • Porous acicular mullite is promising material for filtration of diesel engine exhaust. • Samples with decent mechanical integrity and porosity of more than 60% were fabricated. - Abstract: Porous acicular mullite was fabricated by using waste MoSi{sub 2} heating element and Al{sub 2}O{sub 3}. Careful calcination of the pulverized heating element led to the formation of a mixture of MoO{sub 3} and amorphous SiO{sub 2}. This mixture was employed as both SiO{sub 2} precursor and pore former. The oxidation of MoSi{sub 2} and mullite formation were studied. The effect of fabrication temperature on phase composition, porosity, grain morphology, and compressive strength of sintered mullite was examined. Pure mullite with porosity of more than 60% and compressive strength of ∼20 MPa was obtained at temperature as low as 1300 °C. The microstructure consisted of elongated, rectangular, prism-like grains which are known to be effective in filtration of diesel engine exhaust. The increase in sintering temperature caused the change of grain morphology and reduction in compressive strength.

36 MATERIALS SCIENCE↗