Search NASA⌕ Search

SEARCH · Search NASA

Results for “COLLISION AVOIDANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Terrain-Following/Terrain-Avoidance System For Helicopters

Report describes early stages of development of control system enabling helicopter to follow automatically contours of terrain below and avoid collisions with terrain. Focuses on optimization of algorithm for generation of flightpath with respect to several variables, development of controller to position helicopter precisely along terrain-following/terrain-avoidance (TF/TA) flightpath, and integration of flightpath-trajectory software with flightpath-control software.

Dorr, Dan W.↗
NASA NTRS1987

Algorithms for adaptive control of two-arm flexible manipulators under uncertainty

A nonlinear extension of model reference adaptive control (MRAC) technique is used to guide a double arm nonlinearizable robot manipulator with flexible links, driven by actuators collocated with joints subject to uncertain payload and inertia. The objective is to track a given simple linear and rigid but compatible dynamical model in real, possible stipulated time and within stipulated degree of accuracy of convergence while avoiding collision of the arms. The objective is attained by a specified signal adaptive feedback controller and by adaptive laws, both given in closed form. A case of 4 DOF manipulator illustrates the technique.

Skowronski, J. M.↗
NASA NTRS1989

Interaction dynamics of multiple mobile robots with simple navigation strategies

The global dynamic behavior of multiple interacting autonomous mobile robots with simple navigation strategies is studied. Here, the effective spatial domain of each robot is taken to be a closed ball about its mass center. It is assumed that each robot has a specified cone of visibility such that interaction with other robots takes place only when they enter its visibility cone. Based on a particle model for the robots, various simple homing and collision-avoidance navigation strategies are derived. Then, an analysis of the dynamical behavior of the interacting robots in unbounded spatial domains is made. The article concludes with the results of computer simulations studies of two or more interacting robots.

Wang, P. K. C.↗
NASA NTRS1989

Sensitivity of propulsion system selection to Space Station Freedom performance requirements

The selection of the propulsion system for the Space Station (SS) is reassessed. The propulsion system consists of two distinct elements. The first of these combusts gaseous oxygen and hydrogen produced from water electrolysis, to maintain the SS altitude and perform higher thrust maneuvers for backup attitude control, collision avoidance, and other contingencies. The second consists of gas resistojets, which augment altitude maintenance. The results of a parametric comparison of the life cycle costs of this electrolysis/resistojet propulsion with those of other system options, carried out over a range of probable performance requirements, confirmed the baseline superiority of the SS propulsion system for most anticipated conditions. However, relative costs among impulse requirements vary so much that major changes in the design conditions may warrant implementation of another system (such as hydrazine with water resistojets).

Schmidt, George R.↗
NASA NTRS1989

Space Station Freedom integrated fault model

A demonstration of an integrated fault propagation model for Space Station Freedom is described. The demonstration uses a HyperCard graphical interface to show how failures can propagate from one component to another, both within a system and between systems. It also shows how hardware failures can impact certain defined functions like reboost, atmosphere maintenance or collision avoidance. The demonstration enables the user to view block diagrams for the various space station systems using an overview screen, and interactively choose a component and see what single or dual failure combinations can cause it to fail. It also allows the user to directly view the fault model, which is a collection of drawing and text listings accessible from a guide screen. Fault modeling provides a useful technique for analyzing individual systems and also interactions between systems in the presence of multiple failures so that a complete picture of failure tolerance and component criticality can be achieved.

Becker, Fred J.↗
NASA NTRS1990

The real-time learning mechanism of the Scientific Research Associates Advanced Robotic System (SRAARS)

Scientific research associates advanced robotic system (SRAARS) is an intelligent robotic system which has autonomous learning capability in geometric reasoning. The system is equipped with one global intelligence center (GIC) and eight local intelligence centers (LICs). It controls mainly sixteen links with fourteen active joints, which constitute two articulated arms, an extensible lower body, a vision system with two CCD cameras and a mobile base. The on-board knowledge-based system supports the learning controller with model representations of both the robot and the working environment. By consecutive verifying and planning procedures, hypothesis-and-test routines and learning-by-analogy paradigm, the system would autonomously build up its own understanding of the relationship between itself (i.e., the robot) and the focused environment for the purposes of collision avoidance, motion analysis and object manipulation. The intelligence of SRAARS presents a valuable technical advantage to implement robotic systems for space exploration and space station operations.

Chen, Alexander Y.↗
NASA NTRS1989

A design philosophy for multi-layer neural networks with applications to robot control

A system is proposed which receives input information from many sensors that may have diverse scaling, dimension, and data representations. The proposed system tolerates sensory information with faults. The proposed self-adaptive processing technique has great promise in integrating the techniques of artificial intelligence and neural networks in an attempt to build a more intelligent computing environment. The proposed architecture can provide a detailed decision tree based on the input information, information stored in a long-term memory, and the adapted rule-based knowledge. A mathematical model for analysis will be obtained to validate the cited hypotheses. An extensive software program will be developed to simulate a typical example of pattern recognition problem. It is shown that the proposed model displays attention, expectation, spatio-temporal, and predictory behavior which are specific to the human brain. The anticipated results of this research project are: (1) creation of a new dynamic neural network structure, and (2) applications to and comparison with conventional multi-layer neural network structures. The anticipated benefits from this research are vast. The model can be used in a neuro-computer architecture as a building block which can perform complicated, nonlinear, time-varying mapping from a multitude of input excitory classes to an output or decision environment. It can be used for coordinating different sensory inputs and past experience of a dynamic system and actuating signals. The commercial applications of this project can be the creation of a special-purpose neuro-computer hardware which can be used in spatio-temporal pattern recognitions in such areas as air defense systems, e.g., target tracking, and recognition. Potential robotics-related applications are trajectory planning, inverse dynamics computations, hierarchical control, task-oriented control, and collision avoidance.

Vadiee, Nader↗
NASA NTRS1990

Implication of orbital debris for Space Station design

A large increase in the debris environment combined with the existing space station program requirements results in larger design debris particle sizes being used for designing the Space Station meteoroid and debris protection system. Equipment affecting survivability of the Space Station and its crew is identified and the amount of protection needed is assessed. A combination of passive shielding and active techniques is considered along with the requirements for developing easily augmentable shielding and the use of new shielding materials to reduce launch weight and volume. In addition to passive protection development, collision avoidance procedures moving the station out of the path of very large debris particles must be developed. Innovative solutions, including on-orbit debris detection and tracking devices, active debris interceptors, and 'storm cellars' are addressed.

Nieder, Raymond L.↗
NASA NTRS1990

Modelling and performance analysis of four and eight element TCAS

This semi-annual report describes the work performed during the period September 1989 through March 1990. The first section presents a description of the effect of the engines of the Boeing 737-200 on the performance of a bottom mounted eight-element traffic alert and collision avoidance system (TCAS). The second section deals exclusively with a four element TCAS antenna. The model obtained to simulate the four element TCAS and new algorithms developed for studying its performance are described. The effect of location on its performance when mounted on top of a Boeing 737-200 operating at 1060 MHz is discussed. It was found that the four element TCAS generally does not perform as well as the eight element TCAS III.

Sampath, K. S.↗
NASA NTRS1990

Straddle design of spiral bevel and hypoid pinions and gears

The design of spiral bevel and hypoid gears that have a shaft extended from both sides of the cone apex (straddle design) is considered. A main difficulty of such a design is determining the length and diameter of the shaft that might be undercut by the head cutter during gear tooth generation. A method that determines the free space available for the gear shaft is proposed. The approach avoids collision between the shaft being designed and the head cutter during tooth generation. The approach is illustrated with a numerical example.

Litvin, Faydor L.↗
NASA NTRS1991

A spatial disorientation predictor device to enhance pilot situational awareness regarding aircraft attitude

An effort was initiated at the Armstrong Aerospace Medical Research Laboratory (AAMRL) to investigate the improvement of the situational awareness of a pilot with respect to his aircraft's spatial orientation. The end product of this study is a device to alert a pilot to potentially disorienting situations. Much like a ground collision avoidance system (GCAS) is used in fighter aircraft to alert the pilot to 'pull up' when dangerous flight paths are predicted, this device warns the pilot to put a higher priority on attention to the orientation instrument. A Kalman filter was developed which estimates the pilot's perceived position and orientation. The input to the Kalman filter consists of two classes of data. The first class of data consists of noise parameters (indicating parameter uncertainty), conflict signals (e.g. vestibular and kinesthetic signal disagreement), and some nonlinear effects. The Kalman filter's perceived estimates are now the sum of both Class 1 data (good information) and Class 2 data (distorted information). When the estimated perceived position or orientation is significantly different from the actual position or orientation, the pilot is alerted.

Chelette, T. L.↗
NASA NTRS1989

Finite solid representation of robot manipulation in three-dimensional geometric reasoning

Intelligence robotic system design involves sensor allocation and sensor data fusion. In the field of geometric reasoning, a fast and effective representation method is needed to determine the physical dimensions of the manipulator as well as the motion environment in sufficient detail. Due to the capability of current sensor technology, the integrity of the sensor information is location dependent and point-wise, line-wise and plane-wise in nature. In order to maneuver the robot by reasoning the environment, there is a minimum requirement of prior information for integrating the allocated sensor feedback. Some new theoretical developments of how to associate the number and the locations of the sensors with three-dimensional geometry of the robot and the motion environment is presented. The related collision avoidance problem (CAP) will be addressed as well.

Chen, Alexander Y. K.↗
NASA NTRS1990

Pilot performance research for TCAS

Three separate studies have been conducted to ascertain pilot responsiveness to advisories generated by the Traffic Alert and Collision Avoidance System (TCAS II). In the first of these, pilot responses to normal TCAS II resolution advisories were evaluated, while the second gave attention to amended advisories and the third to alternative display formats. Within this study's simulated conditions, pilots were able to respond to advisories quickly and accurately. The addition of a target vertical speed range on the resolution advisory display resulted in further improvements of pilot response and accuracy.

Chappell, Sheryl L.↗
NASA NTRS1991

Tidal disruption of inviscid protoplanets

Roche showed that equilibrium is impossible for a small fluid body synchronously orbiting a primary within a critical radius now termed the Roche limit. Tidal disruption of orbitally unbound bodies is a potentially important process for planetary formation through collisional accumulation, because the area of the Roche limit is considerably larger then the physical cross section of a protoplanet. Several previous studies were made of dynamical tidal disruption and different models of disruption were proposed. Because of the limitation of these analytical models, we have used a smoothed particle hydrodynamics (SPH) code to model the tidal disruption process. The code is basically the same as the one used to model giant impacts; we simply choose impact parameters large enough to avoid collisions. The primary and secondary both have iron cores and silicate mantles, and are initially isothermal at a molten temperature. The conclusions based on the analytical and numerical models are summarized.

Boss, Alan P.↗
NASA NTRS1991

National Aeronautics and Space Administration (NASA)/american Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1991, Volume 2

The objectives of the program are: (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of participant's institutions; and (4) to contribute to the research objectives of the NASA Centers. A compilation of the final reports on the research projects done by the faculty fellows during the summer of 1991 are presented. Some of the topics covered include: collision avoidance for rover vehicles, bioinstrumentation, neural nets, total quality management of flexible space structures, project scheduling, nondestructive tests, orthostatic intolerance to bedrest, hypersonic reentry simulation, measuring human energy expenditure, tribological models, trace element movement in Anarctic ice, gastrointestinal function, and computer assisted instruction.

Hyman, William A.↗
NASA NTRS1991

Fuzzy logic applications to expert systems and control

A considerable amount of work on the development of fuzzy logic algorithms and application to space related control problems has been done at the Johnson Space Center (JSC) over the past few years. Particularly, guidance control systems for space vehicles during proximity operations, learning systems utilizing neural networks, control of data processing during rendezvous navigation, collision avoidance algorithms, camera tracking controllers, and tether controllers have been developed utilizing fuzzy logic technology. Several other areas in which fuzzy sets and related concepts are being considered at JSC are diagnostic systems, control of robot arms, pattern recognition, and image processing. It has become evident, based on the commercial applications of fuzzy technology in Japan and China during the last few years, that this technology should be exploited by the government as well as private industry for energy savings.

Lea, Robert N.↗
NASA NTRS1991

Commercial Capaciflector

A capacitive proximity/tactile sensor with unique performance capabilities ('capaciflector' or capacitive reflector) is being developed by NASA/Goddard Space Flight Center (GSFC) for use on robots and payloads in space in the interests of safety, efficiency, and ease of operation. Specifically, this sensor will permit robots and their attached payloads to avoid collisions in space with humans and other objects and to dock these payloads in a cluttered environment. The sensor is simple, robust, and inexpensive to manufacture with obvious and recognized commercial possibilities. Accordingly, NASA/GSFC, in conjunction with industry, is embarking on an effort to 'spin' this technology off into the private sector. This effort includes prototypes aimed at commercial applications. The principles of operation of these prototypes are described along with hardware, software, modelling, and test results. The hardware description includes both the physical sensor in terms of a flexible printed circuit board and the electronic circuitry. The software description will include filtering and detection techniques. The modelling will involve finite element electric field analysis and will underline techniques used for design optimization.

Vranish, John M.↗
NASA NTRS1992

Configuration control of seven-degree-of-freedom arms

A seven degree of freedom robot arm with a six degree of freedom end effector is controlled by a processor employing a 6 by 7 Jacobian matrix for defining location and orientation of the end effector in terms of the rotation angles of the joints, a 1 (or more) by 7 Jacobian matrix for defining 1 (or more) user specified kinematic functions constraining location or movement of selected portions of the arm in terms of the joint angles, the processor combining the two Jacobian matrices to produce an augmented 7 (or more) by 7 Jacobian matrix, the processor effecting control by computing in accordance with forward kinematics from the augmented 7 by 7 Jacobian matrix and from the seven joint angles of the arm a set of seven desired joint angles for transmittal to the joint servo loops of the arm. One of the kinematic functions constraints the orientation of the elbow plane of the arm. Another one of the kinematic functions minimizes a sum of gravitational torques on the joints. Still another kinematic function constrains the location of the arm to perform collision avoidance. Generically, one kinematic function minimizes a sum of selected mechanical parameters of at least some of the joints associated with weighting coefficients which may be changed during arm movement. The mechanical parameters may be velocity errors or gravity torques associated with individual joints.

Seraji, Homayoun↗