SEARCH · Search NASA

Results for “Class D Missions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Comet coma sample return via Giotto II

A comet coma sample return is possible with a low-cost flyby mission. Collecting coma materials and returning them to earth can be accomplished in a free-return trajectory. Intact capture of coma dust, preserving the cometary dust mineralogy, is possible at low encounter speeds. Samples from a known cometary source can then be compared with the wealth of information on meteorites and interplanetary dust. Sample return via Giotto II is a unique, low-cost NASA/ESA cooperative opportunity. With ESA providing the Giotto spacecraft and payload and NASA the sample return capability, first-class science can be accomplished at a very low cost for both NASA and ESA. This paper focuses on the sample return aspects, including sample return objectives, sample collection techniques, experimental work to verify collection concepts, and some of the characteristics of the cometary targets for sample return.

Tsou, P.↗

NASA NTRS1983

Speed benefits of tilt-rotor designs for LHX

The merits of an advanced helicopter and a tilt rotor aircraft for light utility, scout, and attack roles in combat missions envisioned for the year 2000 and beyond were compared. It is demonstrated that speed has increasing value for 11 different mission classes broadly encompassing the intended LHX roles. Helicopter speeds beyond 250 knots are judged to have lower military worth. Since the tilt rotor concept offers a different cost speed relationship than that of helicopters, assessment of a tilt rotor LHX variant was warranted. The technical parameters of an advanced tilt rotor are stablished. Parameters of representative missions are identified, computed relative value of the tilt rotor LHX are compared to the baseline helicopter, a first-order life cycle estimate for the tilt rotor LHX is established, military worth of the alternative design is computed and the results are evaluated. It is suggested that the tilt rotor is the solution with the greatest capability for meeting the uncertainties of future needs.

Mcdaniel, R. L.↗

NASA NTRS2005

MEMS-Based Micro Instruments for In-Situ Planetary Exploration

NASA's planetary exploration strategy is primarily targeted to the detection of extant or extinct signs of life. Thus, the agency is moving towards more in-situ landed missions as evidenced by the recent, successful demonstration of twin Mars Exploration Rovers. Also, future robotic exploration platforms are expected to evolve towards sophisticated analytical laboratories composed of multi-instrument suites. MEMS technology is very attractive for in-situ planetary exploration because of the promise of a diverse and capable set of advanced, low mass and low-power devices and instruments. At JPL, we are exploiting this diversity of MEMS for the development of a new class of miniaturized instruments for planetary exploration. In particular, two examples of this approach are the development of an Electron Luminescence X-ray Spectrometer (ELXS), and a Force-Detected Nuclear Magnetic Resonance (FDNMR) Spectrometer.

micro instruments↗

NASA NTRSDate not supplied

Aerodynamic Implications of Aerocapture Systems for Uranus Orbiters

Exploration of the Ice Giants, Uranus in particular, has been indicated as the highest priority new flagship-class mission by the 2022 Planetary Science Decadal Survey. However, due to it’s location in the solar system, extensive travel time and resources are required for a mission to reach Uranus. Aerocapture offers shorter interplanetary transit times and reduced propellant requirements for such a mission when compared to a traditional propulsive-capture orbiter. Considerations for the aerodynamics of an aerocapture system enabling flagship-class science mission to Uranus are presented. The applicability of a low lift-to-drag entry vehicle aeroshell with flight heritage to a new planet and atmosphere is evaluated. A preliminary aerodatabase is formulated from low-fidelity methods and heritage flight mission data to provide initial estimates of trajectory space to be considered for inserting a spacecraft into orbit at Uranus using aerocapture. Computational fluid dynamics calculations in the free molecular, transitional, and continuum regimes using Direct Simulation Monte Carlo and Navier-Stokes solutions are used to assess the validity of this preliminary aerodatabase. The considered entry vehicle is found to varying levels of agreement with work done by previous flight missions when evaluated for flight in Uranus’ atmosphere. Implications for the aerodynamics of this vehicle as applied in an aerocapture system in flight at Uranus as found by the current work are discussed.

Eli R. Shellabarger↗

NASA NTRS2004

Characterization of the Surface Properties of MUSES-C/Hayabusa Spacecraft Target Asteroid 25143 Itokawa (1998 SF36)

Several spacecraft missions have recently targeted asteroids to study their morphologies and physical properties (e.g. Galileo, NEAR Shoemaker), and more are planned. MUSES-C is a Japanese mission designed to rendezvous with a near-Earth asteroid (NEA). The MUSES-C spacecraft, Hayabusa, was launched successfully in May 2003. It will rendezvous with its target asteroid in 2005, and return samples to the Earth in 2007. Its target, 25143 Itokawa (1998 SF36), made a close approach to the Earth in 2001. We collected an extensive ground-based database of broadband photometry obtained during this time, which maximized the phase angle coverage, to characterize this target in preparation for the mission. Our project was designed to capitalize on the broadband UBVRI photometric observations taken with a series of telescopes, instrumentation, and observers. Photometry and spectrophotometry of Itokawa were acquired at Lowell, McDonald, Steward, Palomar, Table Mountain and Kiso Observatories. The photometric data sets were combined to calculate Hapke model parameters of the surface material of Itokawa, and examine the solar-corrected broadband color characteristics of the asteroid. Broadband photometry of an object can be used to: (1) determine its colors and thereby contribute to the understanding of its surface composition and taxonomic class, and (2) infer global physical surface properties of the target body. We present both colors from UBVRI observations of the MUSES-C target Itokawa, and physical properties derived by applying a Hapke model to the broadband BVRI photometry.

Lederer, S. M.↗

NASA NTRS1992

Ultrasoft x ray bursts: A clue to the origin of gamma ray bursts?

A search was conducted for short timescale (less than or approx. 10 s) faint X ray bursts in the complete 201,000,000 photon Einstein Observatory imaging proportional counter (IPC) data base. Some 73,000,000 events were extracted which were distributed among 11,230 observing intervals with an average observing time of approx. 1400 seconds. To exclude all sources, only those spatial pixels were searched with a count rate less than 6 x 10(exp -4) counts/sec sq arcmin. The mean count rate was much less. All files with less than 400 secs of observing time were excluded. The data was then binned into overlapping cells 4'.3 by 4'.3 by 10 secs in volume, and all the space-time cells were searched to locate cells with more than 5 counts in a 10 sec interval; i.e., a minimum flux enhancement of 50 over the mean rate for that point in space. Some 52 such events were found. An annulus was inspected around the event to see if it coincided with a general rise in the counter's event rate. Ten events did coincide with counter phenomena; these were associated with sunrise, sunset, or the approach of the South Atlantic Anomaly and were excluded. The remaining 42 events were then examined in an attempt to associate them with instrumental or environmental artifacts. The event occurrence times are uniformly distributed over the course of the mission and show no correlation with local solar time; their positions are randomly distributed in geographic, Galactic, and celestial coordinates. Their summed radial distribution is consistent with the point response function of the IPC for a soft source, indicating that the events are focused by the Observatory's mirror system. The integrated spectrum is, indeed, quite soft and is very similar to that of the cataclysmic variable star U Gem in outburst. Most of the events have risetimes of less than or approx. 1 sec and decay times ranging from 1 to 20 sec. Their positions are not associated with any class of catalogued objects. Several possible origins are discussed for the events; if they are associated with gamma ray bursters, they provide interesting constraints on the space density and repetition rate of the underlying source population.

Helfand, D. J.↗

NASA NTRS2012

Laser Time-of-Flight Mass Spectrometry for Future In Situ Planetary Missions

Laser desorption/ionization time-of-flight mass spectrometry (LD-TOF-MS) is a versatile, low-complexity instrument class that holds significant promise for future landed in situ planetary missions that emphasize compositional analysis of surface materials. Here we describe a 5kg-class instrument that is capable of detecting and analyzing a variety of analytes directly from rock or ice samples. Through laboratory studies of a suite of representative samples, we show that detection and analysis of key mineral composition, small organics, and particularly, higher molecular weight organics are well suited to this instrument design. A mass range exceeding 100,000 Da has recently been demonstrated. We describe recent efforts in instrument prototype development and future directions that will enhance our analytical capabilities targeting organic mixtures on primitive and icy bodies. We present results on a series of standards, simulated mixtures, and meteoritic samples.

Getty, S. A.↗

NASA NTRSDate not supplied

Lucy Mission Design Strategy in a Dynamic Operations Environment from Launch Through First Asteroid Encounter

Lucy, a 12-yearlong NASA Discovery-class mission which launched on October 16, 2021will fly by several Jupiter-Trojan asteroids a t the L4 and L5 La grange points. Prior to theL4 Trojan encounter in 2027 and 2028, Lucy will utilize two Earth gravity-assist flybys and fly by two main-belt a steroids. After the L4 encounters a third Earth flyby will set up the L5 Troja n encounter in 2033. This pa per summarizes the baseline mission plan with focus on the spacecraft trajectory and the corresponding essential trajectory correction maneuvers as well as how the Lucy team adapted to many unforeseen changes to the spacecraft configuration and added an asteroid target of opportunity that required changes to the baseline mission plan. Refinement of asteroid flyby science requirements after launch also required updates to the baseline Lucy trajectory.

James V. Mcadams↗

NASA NTRS1993

Past US studies and developments for planetary rovers

The history of planetary rovers in the U.S. space program is outlined in the context of the goals, mission and spacecraft designs, and operations designs. The American lunar rover work has had three main stages. In the early sixties, the capacity of Surveyor lunar landers to deliver rovers with a mass of about 50 kg to the Moon was exploited. Several such machines were built and tested beginning in 1964 but none went to the Moon. A manned 400 kg short range rover was then developed. Three of these operated on the Moon in 1971 and 1972 as part of the Apollo 15, 16 and 17 missions. Following these Apollo successes, attempts were made to provide two kinds of follow on models: automated or dual mode (human carrying or not) rovers in the few hundred kg size class, and multi-ton mobile habitats that could carry humans on extended traverses. With the closing of both Soviet and American lunar exploration in the seventies, neither of these proposals succeeded. In parallel with these lunar developments, a lengthy technology program on Martian roving has gone on in the U.S., sometimes coming close to preproject status and sometimes fading away, but never quite being abandoned. As a result it is possible today to contemplate a wide range of lunar and Martian roving missions that could be made practical within a few years. However, with today's funding constraints none of the well studied, larger mission concepts appear to fit. Therefore new efforts are being made toward developing much smaller rovers taking advantage of new miniature techniques, not only in mobility systems but also in the scientific instruments that a small rover can carry. Illustrations are included.

Burke, James D.↗

NASA NTRS1989

Lunar base and Mars base design projects

The space design classes at the University of Texas at Austin undertook seven projects in support of the NASA/USRA advanced space design program during the 1988-89 year. A total of 51 students, including 5 graduate students, participated in the design efforts. Four projects were done within the Aerospace Engineering (ASE) design program and three within the Mechanical Engineering (ME) program. Both lunar base and Mars base design efforts were studied, and the specific projects were as follows: Lunar Crew Emergency Rescue Vehicle (ASE); Mars Logistics Lander Convertible to a Rocket Hopper (ME); A Robotically Constructed Production and Supply Base on Phobos (ASE); A Mars/Phobos Transportation System (ASE); Manned Base Design and Related Construction Issues for Mars/Phobos Mission (ME); and Health Care Needs for a Lunar Colony and Design of Permanent Medical Facility (ME).

Amos, J.↗

NASA NTRS2009

Lunar Navigation Architecture Design Considerations

The NASA Constellation Program is aiming to establish a long-term presence on the lunar surface. The Constellation elements (Orion, Altair, Earth Departure Stage, and Ares launch vehicles) will require a lunar navigation architecture for navigation state updates during lunar-class missions. Orion in particular has baselined earth-based ground direct tracking as the primary source for much of its absolute navigation needs. However, due to the uncertainty in the lunar navigation architecture, the Orion program has had to make certain assumptions on the capabilities of such architectures in order to adequately scale the vehicle design trade space. The following paper outlines lunar navigation requirements, the Orion program assumptions, and the impacts of these assumptions to the lunar navigation architecture design. The selection of potential sites was based upon geometric baselines, logistical feasibility, redundancy, and abort support capability. Simulated navigation covariances mapped to entry interface flightpath- angle uncertainties were used to evaluate knowledge errors. A minimum ground station architecture was identified consisting of Goldstone, Madrid, Canberra, Santiago, Hartebeeshoek, Dongora, Hawaii, Guam, and Ascension Island (or the geometric equivalent).

D'Souza, Christopher↗

NASA NTRS1988

Analysis of low gravity tolerance of model experiments for space station: Preliminary results for directional solidification

It has become clear from measurements of the acceleration environment in the Spacelab that the residual gravity levels on board a spacecraft in low Earth orbit can be significant and should be of concern to experimenters who wish to take advantage of the low gravity conditions on future Spacelab missions and on board the Space Station. The basic goals are to better understand the low gravity tolerance of three classes of materials science experiments: crystal growth from a melt, a vapor, and a solution. The results of the research will provide guidance toward the determination of the sensitivity of the low gravity environment, the design of the laboratory facilites, and the timelining of materials science experiments. To data, analyses of the effects of microgravity environment were, with a few exceptions, restricted to order of magnitude estimates. Preliminary results obtained from numerical models of the effects of residual steady and time dependent acceleration are reported on: heat, mass, and momentum transport during the growth of a dilute alloy by the Bridgman-Stockbarger technique, and the response of a simple fluid physics experiment involving buoyant convection in a square cavity.

Alexander, J. Iwan D.↗

NASA NTRS1990

Miniaturized, 9-12 micron heterodyne spectrometer with space qualifiable design features

A demonstration-prototype CO2-laser heterodyne spectrometer operating at 9-12 microns and suitable for long-term space missions is described and illustrated with extensive diagrams, drawings, photographs, and graphs of test performance data. The spectrometer has total volume 0.63 cu m, mass 30 kg, and power requirement 60-70 W, compatible with miniature-class Space Shuttle experiment payload specifications. It comprises three modules: (1) an optical front end with reflecting optics, a 2-GHz BW HgCdTe photomixer, and a 0-2-GHz 40-dB RF preamplifier; (2) a local oscillator with an RF-excited waveguide CO2 laser, a 75-percent-efficiency RF amplifier, a stepper-driven grating mode selector, and an etalon stabilized for over 30,000 h of use; and (3) an RF-filter-bank spectral-line receiver with a 25-MHz RF channel, 1.6-GHz IF spectral coverage, onboard instrument control, a serial link to the host computer, and highly integrated design.

Glenar, D. A.↗

NASA NTRS1992

The roles of humans and robots as field geologists on the Moon

The geologic exploration of the Moon will be one of the primary scientific functions of any lunar base program. Geologic reconnaissance, the broad-scale characterization of processes and regions, is an ongoing effort that has already started and will continue after base establishment. Such reconnaissance is best done by remote sensing from lunar orbit and simple, automated, sample return missions of the Soviet Luna class. Field study, in contrast, requires intensive work capabilities and the guiding influence of human intelligence. We suggest that the most effective way to accomplish the goals of geologic field study on the Moon is through the use of teleoperated robots, under the direct control of a human geologists who remains at the lunar base, or possibly on Earth. These robots would have a global traverse range, could possess sensory abilities optimized for geologic field work, and would accomplish surface exploration goals without the safety and life support concerns attendance with the use of human geologists on the Moon. By developing the capability to explore any point on the Moon immediately after base establishment, the use of such teleoperated, robotic field geologists makes the single-site lunar base into a 'global' base from the viewpoint of geologic exploration.

Spudis, Paul D.↗

NASA NTRS2005

The Space Technology 5 Power System Design

The Space Technology 5 (ST5) mission is a NASA New Millennium Program (NMP) project that was developed to validate new technologies for future missions and to demonstrate the feasibility of building and launching multiple, miniature spacecraft that can operate as science probes, collecting research quality measurements. The three satellites in the ST5 constellation will be launched into a sun synchronous LEO (Low Earth Orbit) in early 2006. ST5 fits in the 25 kilogram and 24 Watt class of miniature but fully capable spacecraft. The power system design features the use of new technology components and a low voltage power bus. In order to hold the mass and volume low and to qualify new technologies for future use in space, high efficiency triple junction solar cells and a lithium ion battery were baselined into the design. The Power System Electronics (PSE) was designed for a high radiation environment and uses hybrid microcircuits for power switching and over current protection. The ST5 power system architecture and technologies will be presented.

Stewart, Karen D.↗

NASA NTRS2000

National Space Biomedical Research Institute Annual Report

This report summarizes the activities of the National Space Biomedical Research Institute (NSBRI) during FY 2000. The NSBRI is responsible for the development of countermeasures against the deleterious effects of long-duration space flight and performs fundamental and applied space biomedical research directed towards this specific goal. Its mission is to lead a world-class, national effort in integrated, critical path space biomedical research that supports NASA's Human Exploration and Development of Space (HEDS) Strategic Plan by focusing on the enabling of long-term human presence in, development of, and exploration of space. This is accomplished by: designing, testing and validating effective countermeasures to address the biological and environmental impediments to long-term human space flight; defining the molecular, cellular, organ-level, integrated responses and mechanistic relationships that ultimately determine these impediments, where such activity fosters the development of novel countermeasures; establishing biomedical support technologies to maximize human performance in space, reduce biomedical hazards to an acceptable level, and deliver quality medical care; transferring and disseminating the biomedical advances in knowledge and technology acquired through living and working in space to the general benefit of mankind, including the treatment of patients suffering from gravity- and radiation-related conditions on Earth; and ensuring open involvement of the scientific community, industry and the public at large in the Institute's activities and fostering a robust collaboration with NASA, particularly through NASA's Lyndon B. Johnson Space Center. Attachment:Appendices (A,B,C,D,E,F,G,H,I,J,K,L,M,N,O, and P.).

Source record↗

NASA NTRS2021

Neptune Odyssey: A Flagship Concept for the Exploration of the Neptune–Triton System

The Neptune Odyssey mission concept is a Flagship-class orbiter and atmospheric probe to the Neptune–Triton system. This bold mission of exploration would orbit an ice-giant planet to study the planet, its rings, small satellites, space environment, and the planet-sized moon Triton. Triton is a captured dwarf planet from the Kuiper Belt, twin of Pluto, and likely ocean world. Odyssey addresses Neptune system-level science, with equal priorities placed on Neptune, its rings, moons, space environment, and Triton. Between Uranus and Neptune, the latter is unique in providing simultaneous access to both an ice giant and a Kuiper Belt dwarf planet. The spacecraft—in a class equivalent to the NASA/ESA/ASI Cassini spacecraft—would launch by 2031 on a Space Launch System or equivalent launch vehicle and utilize a Jupiter gravity assist for a 12 yr cruise to Neptune and a 4 yr prime orbital mission; alternatively a launch after 2031 would have a 16 yr direct-to-Neptune cruise phase. Our solution provides annual launch opportunities and allows for an easy upgrade to the shorter (12 yr) cruise. Odyssey would orbit Neptune retrograde (prograde with respect to Triton), using the moonʼs gravity to shape the orbital tour and allow coverage of Triton, Neptune, and the space environment. The atmospheric entry probe would descend in ∼37 minutes to the 10 bar pressure level in Neptune’s atmosphere just before Odysseyʼs orbit-insertion engine burn. Odysseyʼs mission would end by conducting a Cassini-like “Grand Finale,” passing inside the rings and ultimately taking a final great plunge into Neptuneʼs atmosphere.

Abigail M. Rymer↗

NASA NTRS1981

Consolidation of NASA tracking stations into a single ground network in the TDRSS era

NASA has operated two separate worldwide ground-based tracking and data acquisition networks for support of its various missions. The Spaceflight Tracking and Data Network (STDN) has provided support to all NASA earth orbiting spacecraft. The Deep Space Network (DSN) supports almost exclusively those unmanned exploratory spacecraft which have been sent far from earth. The Tracking and Data Relay Satellite System (TDRSS), which is conceptually a part of the STDN, will soon be added to the first two networks. The TDRSS will consist of two geosynchronous satellites together with a single ground terminal in White Sands, New Mexico. The TDRSS was conceived as a means of providing improved tracking and data relay service for a large class of the earth orbiting satellites. An investigation was conducted with the objective to reduce the costs of providing support to those spacecraft which were not TDRS-compatible. It was recommended that the core sites of the Ground segment of the STDN (GSTDN) be consolidated into the DSN

Layland, J. W.↗