Search NASA⌕ Search

SEARCH · Search NASA

Results for “Command and Control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

The Imaging X-Ray Polarimetry Explorer (IXPE): Technical Overview IV

Scheduled to launch in late 2021,the Imaging X-ray Polarimetry Explorer (IXPE) is a Small Explorer Mission designed to open up a new window of investigation --X-ray polarimetry. The IXPE observatory features 3 identical telescopes each consisting of a mirror module assembly with a polarization-sensitive imaging x-ray detector at its focus. An extending boom, deployed on orbit, provides the necessary 4 m focal length. The payload sits atop a 3-axis stabilized spacecraft which, among other things, provides power, attitude determination and control, commanding, and telemetry to the ground. During its 2-year baseline mission, IXPE will conduct precise polarimetry for samples of multiple categories of x-ray sources, with follow-on observations of selected targets. IXPE is a partnership between NASA and the Italian Space Agency (ASI).

X-ray polarimetry↗
NASA NTRSDate not supplied

Impact of Latency and Reliability on Separation Assurance with Remotely Piloted Aircraft in Terminal Operations

Remotely Piloted Aircraft (RPA) for cargo operations in the national airspace system will impact safety due to, among other factors, the latency and reliability of command & control, and of communication. This paper investigates the safety impact with increasing mix of RPA amidst manned traffic in a generic arrival pattern with three merging flows. Latency was modelled as the response time between air traffic control's determination of a resolution and the RPAs' initiation of the maneuver. Reliability was modelled as a message drop probability. The experiment was repeated with two different aircraft types having different performance characteristics as representatives of RPA for conducting automated cargo operations. Overall response time above thirty seconds and message drop probability over twenty percent caused losses of separation. Specific results depended on the RPA aircraft type. The detailed impacts of latency and reliability with increasing mix of RPA traffic are provided. Applications of the approach for further studies at increasing levels of automation are also discussed.

Vishwanath Bulusu↗
NASA NTRS2022

Impact of Latency and Reliability on Separation Assurance with Remotely Piloted Aircraft in Terminal Operations

Remotely Piloted Aircraft (RPA) for cargo operations in the national airspace system will impact safety due to, among other factors, the latency and reliability of command & control, and of communication. This paper investigates the safety impact with increasing mix of RPA amidst manned traffic in a generic arrival pattern with three merging flows. Latency was modelled as the response time between air traffic control's determination of a resolution and the RPAs' initiation of the maneuver. Reliability was modelled as a message drop probability. The experiment was repeated with two different aircraft types having different performance characteristics as representatives of RPA for conducting automated cargo operations. Overall response time above thirty seconds and message drop probability over twenty percent caused losses of separation. Specific results depended on the RPA aircraft type. The detailed impacts of latency and reliability with increasing mix of RPA traffic are provided. Applications of the approach for further studies at increasing levels of automation are also discussed.

Vishwanath Bulusu↗
NASA NTRSDate not supplied

Advances in Autonomous Communications and Operations: Tes-N Series

Advances in nanosat subsystems over the past decade have taken the CubeSat standard from a communication-limited educational tool to a powerful platform enabling space research. The potential for autonomous operations may greatly increase the capability of downlinking even larger data sets. This is enabled through miniaturization of software-defined radio/cognitive communication solutions and a rapidly growing number of ground stations and satellite network crosslinks. The TechEdSat-n orbital flight series is currently demonstrating experiments using cognitive communication concepts including User Initiated Service (UIS) and High-rate Delay Tolerant Networks (HDTN), which show a significant step toward improved capability. At the core of this is the use of the Iridium L-band Short Burst Data (SBD) modems, pioneered by TES-n for space applications. SBD enables unique rapid command, control, and scheduling to initiate the UIS and HDTN protocols. This occurs by performing GPS-assisted on-orbit ephemeris determination, enabling negotiation with high bandwidth ground assets to repeatedly downlink over a specific commercial or government-owned ground station. The technique is RF band-agnostic and may be extended to higher bandwidth stations and SDRs. This may also include free-space optical communication, through both laser and omnidirectional LEDs, which can provide an attractive protocol for downlinking very large datasets over far fewer ground stations. In addition, this may be extended to lunar applications for such future concepts as LunaNet, whereby scheduling and cognitive technologies can assist in greatly improving Earth downlink capabilities with ground stations which will see greater competition for usage. Lastly, the NASA Communication Service Program (CSP), intended to eventually replace the NASA Tracking and Data Relay Satellite System (TDRSS) will also demonstrate the feasibility of commercially-provided satellite communication capabilities. All of these combined advances, including large advances in on-board computation on small platforms, will result in more remarkable data processing capability – yielding even more as of yet unknown discoveries.

Autonomy↗
NASA NTRS2001

Using XML and Java Technologies for Astronomical Instrument Control

Traditionally, instrument command and control systems have been highly specialized, consisting mostly of custom code that is difficult to develop, maintain, and extend. Such solutions are initially very costly and are inflexible to subsequent engineering change requests, increasing software maintenance costs. Instrument description is too tightly coupled with details of implementation. NASA Goddard Space Flight Center, under the Instrument Remote Control (IRC) project, is developing a general and highly extensible framework that applies to any kind of instrument that can be controlled by a computer. The software architecture combines the platform independent processing capabilities of Java with the power of the Extensible Markup Language (XML), a human readable and machine understandable way to describe structured data. A key aspect of the object-oriented architecture is that the software is driven by an instrument description, written using the Instrument Markup Language (IML), a dialect of XML. IML is used to describe the command sets and command formats of the instrument, communication mechanisms, format of the data coming from the instrument, and characteristics of the graphical user interface to control and monitor the instrument. The IRC framework allows the users to define a data analysis pipeline which converts data coming out of the instrument. The data can be used in visualizations in order for the user to assess the data in real-time, if necessary. The data analysis pipeline algorithms can be supplied by the user in a variety of forms or programming languages. Although the current integration effort is targeted for the High-resolution Airborne Wideband Camera (HAWC) and the Submillimeter and Far Infrared Experiment (SAFIRE), first-light instruments of the Stratospheric Observatory for Infrared Astronomy (SOFIA), the framework is designed to be generic and extensible so that it can be applied to any instrument. Plans are underway to test the framework with other types of instruments, such as remote sensing earth science instruments.

Ames, Troy↗
NASA NTRS1976

Design of an all-attitude flight control system to execute commanded bank angles and angles of attack

A flight control system for use in air-to-air combat simulation was designed. The input to the flight control system are commanded bank angle and angle of attack, the output are commands to the control surface actuators such that the commanded values will be achieved in near minimum time and sideslip is controlled to remain small. For the longitudinal direction, a conventional linear control system with gains scheduled as a function of dynamic pressure is employed. For the lateral direction, a novel control system, consisting of a linear portion for small bank angle errors and a bang-bang control system for large errors and error rates is employed.

Burgin, G. H.↗
NASA NTRS2005

Command Generation and Control of Momentum Exchange Electrodynamic Reboost Tethered Satellite

The research completed for this NASA Graduate Student Research Program Fellowship sought to enhance the current state-of-the-art dynamic models and control laws for Momentum Exchange Electrodynamic Reboost satellite systems by utilizing command generation, specifically Input Shaping. The precise control of tethered spacecraft with flexible appendages is extremely difficult. The complexity is magnified many times when the satellite must interact with other satellites as in a momentum exchange via a tether. The Momentum Exchange Electronic Reboost Tether (MXER) concept encapsulates all of these challenging tasks [l]. Input Shaping is a command generation technique that allows flexible spacecraft to move without inducing residual vibration [2], limit transient deflection [3] and utilize fuel-efficient actuation [4]. Input shaping is implemented by convolving a sequence of impulses, known as the input shaper, with a desired system command to produce a shaped input that is then used to drive the system. This process is demonstrated in Figure 1. The shaped command is then use to drive the system without residual vibration while meeting many other performance specifications. The completed work developed tether control algorithms for retrieval. A simple model of the tether response has been developed and command shaping was implemented to minimize unwanted dynamics. A model of a flexible electrodynamic tether has been developed to investigate the tether s response during reboost. Command shaping techniques have been developed to eliminate the tether oscillations and reduce the tether s deflection to pre-specified levels during reboost. Additionally, a model for the spin-up of a tethered system was developed. This model was used in determining the parameters for optimization the resulting angular velocity.

Robertson, Michael J.↗
NASA NTRS1981

Command profile for Galileo scan platform control

A recursive command profile is developed for the control of a two-degree-of-freedom scan platform mounted on a flexible structure. Perfect sensors and actuators are assumed for development and testing, and structural vibrations are minimized by actuator torque commands following a smooth torque-time profile. The integral of the smooth torque profile, the rate profile, is recursively generated by a piecewise constant second derivation, and the torque applied by the closk actuator is divided into three components. Results show that the smooth platform motion in response to the command profiles is what the Galileo control systems needs to avoid stator structural vibrations. Position, rate and acceleration profiles are also presented, and the resulting motion of the scan platform in response to command profiles is illustrated.

Man, G. K.↗
NASA NTRS1961

Design and Flight Tests of an Adaptive Control System Employing Normal-Acceleration Command

An adaptive control system employing normal-acceleration command has been designed with the aid of an analog computer and has been flight tested. The design of the system was based on the concept of using a mathematical model in combination with a high gain and a limiter. The study was undertaken to investigate the application of a system of this type to the task of maintaining nearly constant dynamic longitudinal response of a piloted airplane over the flight envelope without relying on air data measurements for gain adjustment. The range of flight conditions investigated was between Mach numbers of 0.36 and 1.15 and altitudes of 10,000 and 40,000 feet. The final adaptive system configuration was derived from analog computer tests, in which the physical airplane control system and much of the control circuitry were included in the loop. The method employed to generate the feedback signals resulted in a model whose characteristics varied somewhat with changes in flight condition. Flight results showed that the system limited the variation in longitudinal natural frequency of the adaptive airplane to about half that of the basic airplane and that, for the subsonic cases, the damping ratio was maintained between 0.56 and 0.69. The system also automatically compensated for the transonic trim change. Objectionable features of the system were an exaggerated sensitivity of pitch attitude to gust disturbances, abnormally large pitch attitude response for a given pilot input at low speeds, and an initial delay in normal-acceleration response to pilot control at all flight conditions. The adaptive system chatter of +/-0.05 to +/-0.10 of elevon at about 9 cycles per second (resulting in a maximum airplane normal-acceleration response of from +/-0.025 g to +/- 0.035 g) was considered by the pilots to be mildly objectionable but tolerable.

McNeill, Water E.↗
NASA NTRSDate not supplied

Human Systems Integration Approach in Implementing Voice-Control of Future Spacecraft Systems

Crewed spacecraft and habitats of the future will require more automation and autonomy to support complex missions. However, these complex systems require a more efficient command and control input method. Speech recognition along with visual or auditory feedback is an alternative, providing an extra pair of hands and eyes for the crew. Yet, speech recognition demands a highly integrated development approach to ensure a successful system implementation. To ensure the voice control application is developed correctly will require a Human Systems Integration (HSI) approach. This paper provides an insight into the development of a speech/voice control application of a spacecraft system that encompasses automation and autonomy through an HSI approach. Results of the voice control experiment of the Space Shuttle camera system are provided as lessons learned about voice control on a spacecraft. Limitations and challenges of the technology are addressed as well as how HSI can help develop these types of voice control command and control systems.

Voice control↗
NASA NTRSDate not supplied

Applying NASA’s Human Systems Integration Methodology in Implementing Voice-Control of Future Spacecraft Systems

Through the NASA Artemis program, a new era of space exploration will serve to lead humanity towards sustained lunar exploration in preparation for the next giant leap-human exploration of Mars. These crewed spacecraft and habitats will require more automation and autonomy to support these complex missions. Crew size will be small and therefore a more efficient command and control input method is desired. Speech recognition along with visual or auditory feedback is an alternative, providing an extra pair of hands and eyes for the crew. Yet, speech recognition demands a highly integrated development approach to ensure a successful system implementation. To ensure the voice control application is developed correctly will require a Human Systems Integration (HSI) approach. This paper provides an insight into the development of a speech/voice control application for a spacecraft system that encompasses automation and autonomy through an HSI approach. Results of the voice control experiment of the Space Shuttle camera system are provided as lessons learned about using voice control on a spacecraft. Limitations and challenges of the technology are addressed as well as how HSI along with Human Readiness Level can help successfully develop voice control command and control systems.

Systems Engineering↗
NASA NTRS1997

Multi-Window Controllers for Autonomous Space Systems

Multi-window controllers select between elementary linear controllers using nonlinear windows based on the amplitude and frequency content of the feedback error. The controllers are relatively simple to implement and perform much better than linear controllers. The commanders for such controllers only order the destination point and are freed from generating the command time-profiles. The robotic missions rely heavily on the tasks of acquisition and tracking. For autonomous and optimal control of the spacecraft, the control bandwidth must be larger while the feedback can (and, therefore, must) be reduced.. Combining linear compensators via multi-window nonlinear summer guarantees minimum phase character of the combined transfer function. It is shown that the solution may require using several parallel branches and windows. Several examples of multi-window nonlinear controller applications are presented.

Lurie, B, J.↗
NASA NTRS2006

AERCam Autonomy: Intelligent Software Architecture for Robotic Free Flying Nanosatellite Inspection Vehicles

The NASA Johnson Space Center has developed a nanosatellite-class Free Flyer intended for future external inspection and remote viewing of human spacecraft. The Miniature Autonomous Extravehicular Robotic Camera (Mini AERCam) technology demonstration unit has been integrated into the approximate form and function of a flight system. The spherical Mini AERCam Free Flyer is 7.5 inches in diameter and weighs approximately 10 pounds, yet it incorporates significant additional capabilities compared to the 35-pound, 14-inch diameter AERCam Sprint that flew as a Shuttle flight experiment in 1997. Mini AERCam hosts a full suite of miniaturized avionics, instrumentation, communications, navigation, power, propulsion, and imaging subsystems, including digital video cameras and a high resolution still image camera. The vehicle is designed for either remotely piloted operations or supervised autonomous operations, including automatic stationkeeping, point-to-point maneuvering, and waypoint tracking. The Mini AERCam Free Flyer is accompanied by a sophisticated control station for command and control, as well as a docking system for automated deployment, docking, and recharge at a parent spacecraft. Free Flyer functional testing has been conducted successfully on both an airbearing table and in a six-degree-of-freedom closed-loop orbital simulation with avionics hardware in the loop. Mini AERCam aims to provide beneficial on-orbit views that cannot be obtained from fixed cameras, cameras on robotic manipulators, or cameras carried by crewmembers during extravehicular activities (EVA s). On Shuttle or International Space Station (ISS), for example, Mini AERCam could support external robotic operations by supplying orthogonal views to the intravehicular activity (IVA) robotic operator, supply views of EVA operations to IVA and/or ground crews monitoring the EVA, and carry out independent visual inspections of areas of interest around the spacecraft. To enable these future benefits with minimal impact on IVA operators and ground controllers, the Mini AERCam system architecture incorporates intelligent systems attributes that support various autonomous capabilities. 1) A robust command sequencer enables task-level command scripting. Command scripting is employed for operations such as automatic inspection scans over a region of interest, and operator-hands-off automated docking. 2) A system manager built on the same expert-system software as the command sequencer provides detection and smart-response capability for potential system-level anomalies, like loss of communications between the Free Flyer and control station. 3) An AERCam dynamics manager provides nominal and off-nominal management of guidance, navigation, and control (GN&C) functions. It is employed for safe trajectory monitoring, contingency maneuvering, and related roles. This paper will describe these architectural components of Mini AERCam autonomy, as well as the interaction of these elements with a human operator during supervised autonomous control.

Fredrickson, Steven E.↗
NASA NTRS2018

Utilizing Testing Frameworks for Launch Control Systems Continuous Integration

Command and control software is an integral part of the launch procedure. The most important part of this type of software is its ability to communicate well with the user and relay information in a correctly formatted way such that the user can understand the data. There is a tool that aides the communication between the different parts of the system, and effectively, the user. This instrument is capable of taking several complex values and ensuring that they are correctly sorted into their distinctive message values and distributed properly among the different facets of the system. This tool will easily translate and publish the data inside of messages in the system to something that is readable and understandable. The tool also allows for transmission of the recorded data to the user, effectively ensuring the communication between different components of the system. As well as keeping track of messages and ensuring that the information contained within each of them reaches the correct location, this tool has the ability to keep track of its own statistics and determine how many messages passed in were erroneous and how many were successfully transmitted. It is able to check and see what the total message failure count is when an invalid message is given, as well as the number of different messages and their respective types passed into the tool. This tool is of great value to the new Space Launch System (SLS). As such, the tool must be thoroughly tested with test cases that, although improbable, are possible, where the tool may not function properly. Testing an interface this complex is necessary to ensure mission safety and create unlikely scenarios where the tool would work as intended, and stretch its limits to test that even under the most uncommon conditions it would still continue to function. This software will be an important part of the control system for the newest spacecraft which will fly deeper into space than humans have ever travelled. It will fly beyond the moon, into deep space to Mars and perhaps set the groundwork for a manned mission even further to create more opportunities for interplanetary and even interstellar travel by humans. This mission relies heavily on software and hardware to ensure the safety of the humans that will be on board and therefore must be checked, exhausting each and every different situation, such that there is not a doubt surrounding the well-being of the humans aboard the rocket. That is why testing is such an important part of the mission. It provides evidence that the systems aboard the rocket and on the launch pad are safe.

Unit Testing↗
NASA NTRS1982

Evaluation of a trajectory command concept for manual control of carrier approaches and landings

A novel trajectory control system concept was implemented to provide manual control of a conventional jet aircraft. This concept, called Total Aircraft Flight Control System (TAFCOS), utilizes an inverse model of the aerodynamic and propulsion characteristics and employs feedforward control to provide the required acceleration command. The concept requires on-board digital computations which can easily be handled by a modern airborne computer. The system was studied in a piloted simulation of the carrier approach and landing task with primarily visual flight and guidance cues. The principal modes of vertical flight-path control investigated were vertical velocity command and vertical acceleration command. The study included manual carrier approaches with and without moderate ship motion and associated air disturbances, and tests of the effects of discrete gusts. Manual control of flight path through this new concept was shown to be feasible as an addition to an automatic control system and to have potential as an improved mode of control over conventional control for the carrier approach task.

Mcneill, W. E.↗