Search NASA⌕ Search

SEARCH · Search NASA

Results for “Compact”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Time-dependent spherically symmetric accretion onto compact X-ray sources

Analytical arguments and a numerical hydrodynamic code are used to investigate spherically symmetric accretion onto a compact object, in an attempt to provide some insight into gas flows heated by an outgoing X-ray flux. It is shown that preheating of spherically symmetric accretion flows by energetic radiation from an X-ray source results in time-dependent behavior for a much wider range of source parameters than was determined previously and that there are two distinct types of instability. The results are compared with observations of X-ray bursters and transients as well as with theories on quasars and active galactic nuclei that involve quasi-spherically symmetric accretion onto massive black holes. Models based on spherically symmetric accretion are found to be inconsistent with observations of bursters and transients.

Cowie, L. L.↗

Spectrophotometry of compact H II regions from 4 to 8 microns

Spectrophotometric observations from 4 to 8 microns of the compact H II regions W51-IRS 2 and K3-50 are reported. Two broad absorption features at approximately 6.0 and 6.8 microns are observed in the spectra of W51-IRS 2, and the 6.0-micron feature is seen in K3-50. These features may be due to absorption by silicate grains. A more speculative identification is absorption by hydrocarbon molecules. The continuum flux from 2 to 13 microns is broader than emission from a single-temperature blackbody; this suggests a distribution of dust temperatures within the H II regions. Failure to detect hydrogen Pfund-alpha in W51-IRS 2 indicates significant 7.5-micron extinction. Upper limits are placed on the abundance of Ar(+).

Puetter, R. C.↗

Discovery of a compact far-infrared source, IR 12.4+0.5

Results are reported for far-IR, CO, 8-GHz, 15-GHz, H2O, and near-IR observations of a compact far-IR source (designated IR 12.4+0.5) in the M17 molecular cloud, as well as for CO and near-IR observations of a CO peak (designated MC 12.8+0.5) 24 arcmin to the NE of IR 12.4+0.5. The observed far-IR signal from IR 12.4+0.5 is found to correspond to a flux of 2400 Jy at 69 microns for a color temperature of 70 K, and the FWHM size of the source is estimated to be about 36 arcsec. The CO data for both sources and the observed reddening of background giants are shown to indicate high column densities; the existence of internal heat sources is inferred from the measured CO temperatures and the far-IR emission. It is concluded that the two sources are probably sites of very recent or ongoing star formation and that IR 12.4+0.5 is consistent with the 'cocoon star' model of early star formation.

Wright, E. L.↗

Interstellar scattering, the North Polar Spur, and a possible new class of compact galactic radio sources

Claims for a galactic-latitude dependence of interstellar angular broadening based on interplanetary-scintillation (IPS) observations are investigated. Analysis of the statistics of the angular sizes in an IPS survey shows that there is no evidence for increased angular broadening in the galactic plane. A region of sky about 500 sq deg of arc in area is considered in which significant angular broadening is thought to exist. An association between this region and the nearby North Polar Spur is proposed on the basis of the former's extension off the galactic plane to high latitudes. An evaluation of two-frequency angular-broadening measurements suggests that the data used to support the conclusion about a galactic-latitude dependence are not statistically significant. A study of pulsar data and implications for the angular broadening expected in the interstellar medium for sources at galactic latitudes below + or - 10 deg indicates the possible existence of a previously unsuspected class of compact galactic nonthermal radio sources, designated 'scintars'.

Rickard, J. J.↗

Physical parameter analysis of an intense, compact subflare

Results of analysis of Skylab X-ray proportional counter data (10-s averages) and X-ray telescope filtergrams for the August 9, 1973 (SN/M2) subflare from McMath 12474 (NOAA AR 185) are presented. The event flux profiles and profiles of temperature, volume emission-measure, and a quantity equivalent to thermal energy content are shown. Using the proportional counter data, a peak temperature in excess of 20,000,000 K at 1552:05 UT, a peak volume emission measure of 7 x 10 to the 48th per cu cm at 1553:25 UT, and a peak value of thermal energy content of 2 x 10 to the 16th evgs/cm to the 3/2 power at 1552:45 UT were derived. Based on the analysis of spatially-resolved X-ray images during the period near flare-peak through flare-decay, the flare is observed to be both intense and compact and to consist of at least two identifiable loops whose volumes remained essentially unchanged throughout the event.

Wilson, R. M.↗

A method of mapping compact structure in radio sources using VLBI observations

A two-part technique is described for determining the angular structure of the compact components of radio sources from VLBI observations. With this technique, the source structure is first approximated, using both amplitudes and closure phases, by a model consisting of circularly symmetric Gaussian components located on a grid of positions on the sky. The second part begins by employing this model to predict the visibility phase corresponding to each observed visibility amplitude; these estimated visibility phases are then adjusted to agree with the observed closure phases. The resulting estimates of the visibility phases and the observed visibility amplitudes are then combined in a direct Fourier transform to produce a 'dirty' source map that is deconvolved via the CLEAN procedure on the basis of the point-source response. Some examples based on data generated from test models are provided.

Cotton, W. D.↗

Compact table-tilting mechanism

Optical components are oriented precisely by motorized device for manipulating objects attached to plane tilt table. Mechanism is compact, simple, and has low backlash. It consists of drive motor, rotatable disk, rigid link, and table. Motor rotates about vertical axis, and motion is converted through disk and rigid link to rotation of table about perpendicular axis.

Mitchell, F. R.↗

Compact infrared detector

Broadband IR detector integrated into compact package for pollution monitoring and weather prediction is small, highly responsive, and immune to high noise. Sensing material is transparent sheet metalized with reflecting coating and overcoated with black material on same side. Pulse produced by chopping of infrared source beam creates transient "thermal lens" that temporarily defocuses laser beam probe. Detector monitoring beam measures defocusing which parallels infrared intensity.

Gupta, A.↗

Comparison tests and experimental compliance calibration of the proposed standard round compact plane strain fracture toughness specimen

Standard round specimen fracture test results compared satisfactorily with results from standard rectangular compact specimens machined from the same material. The location of the loading pin holes was found to provide adequate strength in the load bearing region for plane strain fracture toughness testing. Excellent agreement was found between the stress intensity coefficient values obtained from compliance measurements and the analytic solution proposed for inclusion in the standard test method. Load displacement measurements were made using long armed displacement gages and hollow loading cylinders. Gage points registered on the loading hole surfaces through small holes in the walls of the loading cylinders.

Fisher, D. M.↗

Stress-intensity factors and crack-opening displacements for round compact specimens

A two dimensional, boundary collocation stress analysis was used to analyze various round compact specimens. The influence of the round external boundary and of pin-loaded holes on stress intensity factors and crack opening displacements was determined as a function of crack-length-to-specimen-width ratios. A wide-range equation for the stress intensity factors was developed. Equations for crack-surface displacements and load-point displacements were also developed. In addition, stress intensity factors were calculated from compliance methods to demonstrate that load-displacement records must be made at the loading points and not along the crack line for crack-length-to-specimen-width ratios less than about 0.4.

Newman, J. C., Jr.↗

Spectral formation in compact X-ray sources

A method is described for calculating the transfer of X-rays through gas that is optically thick to Compton scattering. The method permits the simultaneous solution of the radiation-dominated temperature and ionization structure of the medium as well as the effects of incoherent Compton scattering of photons. Self-consistent results are obtained for idealized models of compact X-ray sources, represented as point sources of continuum X-rays surrounded by spherical shells of gas, demonstrating the range of spectral features that might result from such optically thick transfer. Some implications for the analysis of X-ray spectra of galactic X-ray sources are discussed.

Ross, R. R.↗

X-ray emission from compact groups of galaxies

The existence of very compact groups, or 'poor clusters,' of galaxies as a category of X-ray source is reported. By analogy with X-ray emission from clusters of galaxies, it is assumed that the extended X-ray emission is due to thermal bremsstrahlung from hot gas in the groups. The derived X-ray temperatures, luminosities, and sizes are similar to those for X-ray emitting, rich clusters of galaxies. It is inferred that these groups are in a late evolutionary stage because of the presence of a dominant galaxy, the absence of spiral galaxies, and the short cooling time inferred for 2A 0335 + 096.

Schwartz, D. A.↗

Spontaneous formation of knots in relativistic flows - A model for variability in compact synchrotron sources

A model is proposed in which regions of enhanced synchrotron emission are formed via radiative thermal instabilities in relativistic flows. A perturbed volume in which the magnetic field is enhanced by a few tens of a percent relative to the steady value collapses due to the increased cooling rate and consequent loss in pressure. The collapse further increases the magnetic field, leading to even shorter radiative lifetimes. The instability progresses in this way until either the external electron pressure is balanced by the perturbed magnetic pressure or the overall expansion of the flow becomes important. A fluid-dynamical treatment of the instability is performed, and the results are shown to apply to flux variations and formation of knots in the relativistic flows which are thought to occur in quasars and active galactic nuclei. The knots possess the same kinematic properties as the collimated flow and can thus be responsible for the apparent superluminal motions observed in compact radio sources.

Marscher, A. P.↗

Compact Dual-Mode Microwave Antenna

Compact dual-mode antenna, 3.66 cm wide by 1.83 cm thick is used both for heating and thermographic detection of tumors in cancer research. Temperature sensor operates independently or simultaneously with heater. Antenna includes 1.6-GHz transmitter and 4.76-GHz receiver. Strip heater between antennas controls temperature of device. Maximum power output is 25 W.

Carr, K. L.↗

Compact Ion Source for Mass Spectrometers

Cyclotron-resonance device uses miniature components and permanent magnet for small size, low weight, and low cost. Gas molecules are ionized by electrons from hot filament. Magnetic field, acting with electrostatic drift field, causes ions to move in circles with a superimposed drift perpendicular to both fields, toward the exit. Compact source can be used for studying ion-molecule reactions by ion cyclotron-resonance methods in conventional mass spectrometer with either magnetic sector or quadrupole sector.

Anicich, V. G.↗

Optimal tooth numbers for compact standard spur gear sets

The design of a standard gear mesh is treated with the objective of minimizing the gear size for a given ratio, pinion torque, and allowable tooth strength. Scoring, pitting fatigue, bending fatigue, and the kinematic limits of contact ratio and interference are considered. A design space is defined in terms of the number of teeth on the pinion and the diametral pitch. This space is then combined with the objective function of minimum center distance to obtain an optimal design region. This region defines the number of pinion teeth for the most compact design. The number is a function of the gear ratio only. A design example illustrating this procedure is also given.

Savage, M.↗

Blue compact dwarf galaxies. I - Neutral hydrogen observations of 115 galaxies

HI observations are reported for a sample of 115 blue compact dwarf (M sub B greater than approximately -18) galaxies or 'extragalactic H II regions' chosen mostly from the objective prism surveys of Markarian (1967-1974) and Haro (1956), with a few objects from Zwicky (1971) and other investigators. Ninety-three galaxies are detected. H I profiles, neutral hydrogen masses, total masses, and all available optical data are given for the 115 galaxies in a consistent and homogeneous system and in a useful format for statistical studies. The data are used in a companion paper to study the stochastic mode of star formation in galaxies.

Thuan, T. X.↗

Compact, Rugged Temperature Recorder

Solid-state temperature recorder is compact, lightweight, and rugged. Records 2,048 temperature readings over period of up to nearly a year and retains them at least another 4 months using batteries. Battery-operated recorder has no moving parts--is completely solid-state electronic.

Westbrook, R. M.↗