Search NASA⌕ Search

SEARCH · Search NASA

Results for “Coupling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Tuneable electronic coupling in linked bis(cubane) cobalt-oxo clusters

A family of cobalt-oxo bis(cubane) complexes wherein each subunit is derived from the Co 4 O 4 cubane, a known water oxidation catalyst, was synthesized. Both 4,4′-bipyrdine and pyrazine were demonstrated to serve as viable bridging ligands. Through an analysis of their half-wave splitting potentials, it was determined that pyrazine-bridged bis(cubane)s exhibit inter-cubane electronic coupling, and that this coupling may be tuned through ligand substitution. Electrostatic contributions to the half-wave splitting potentials were evaluated and found to result in “non-conformist” behavior related to the ion-pairing ability of the electrolytes.

Maddi, Vincent J. P. [University of California, Be↗
DOE OSTI2026

An–imidophosphorane (An = U–Pu) bond covalency and proton-coupled electron transfer thermodynamics driven by orbital energy matching

A series of mid-actinide (An = U–Pu) tetrahomoleptic complexes supported by highly electron-donating imidophosphorane ligands, NPC ([NP t Bu(pyrr) 2 ] − , where t Bu = C(CH 3 ) 3 ; pyrr = pyrrolidinyl = N(C 4 H 8 )), are systematically investigated computationally and experimentally to elucidate the nature of actinide–ligand (An–L) covalency across the An 3+/4+/5+ oxidation states. Trends in An–L bonding and redox properties for these complexes, together with their protonated counterparts, are examined using orbital-, electron density-, and energy-decomposition-based methods. This integrated approach reveals progressively improved energy matching between α-spin An 5f and N im 2p orbitals with increasing atomic number and oxidation state, becoming particularly pronounced in the ligand-dominant π-bonding orbitals of An 4+ and An 5+ . In contrast to the An 3+ species, the enhanced An 5f π contributions in the higher-valent counterparts drive the increase in An–N im covalency for later An, thereby inverting the covalency trend to U < Np < Pu. Redistribution of electron density towards the An and N im atomic basins due to the growing energy-matching assisted covalency correlates with higher pKa values and increased N im –H bond dissociation free energies in protonated An 4+ complexes. Electron density at Nim in An 4+ shows a linear correlation with the p K a values calculated via the Bordwell equation. Calculations predict a cathodic shift of 0.84–1.00 V in the redox couples upon protonation, a trend validated when experimentally accessible. These findings demonstrate an increasing role of covalency driven by orbital energy matching from U to Pu in tuning the thermodynamic driving force for proton-coupled electron transfer in the An 5+ species.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2026

Phase instability-coupled fracture behavior in garnet LLZO solid electrolytes: a machine learning-enabled atomistic study

Fracture in the garnet-type solid electrolyte Li 7 La 3 Zr 2 O 12 (LLZO) poses a critical threat to both the performance and safety of solid-state batteries. To unravel the coupled chemomechanical processes that govern fracture in LLZO under external loading, we carry out large-scale molecular-dynamics simulations with a validated machine-learning force field. Our results demonstrate that triaxial stresses at crack flanks trigger a localized cubic-to-tetragonal phase transformation, which is accompanied by Li-ion rearrangement. The emergent tetragonal domains feature lattice contraction normal to the fracture plane, imposing coherent misfit strains that provide an additional driving force for further crack propagation. Crucially, introducing Li deficiencies stabilizes the cubic phase, postponing the phase transition and thereby delaying fracture initiation. These findings highlight the role of intrinsic phase instability in dictating LLZO's fracture resistance and its critical connection to local Li concentration. This chemomechanical coupling points toward targeted strategies to enhance the mechanical robustness of garnet electrolytes, including tuning Li content, ensuring dopant homogeneity, and refining processing protocols.

Materials science↗
DOE OSTI2026

Power coupled to the slow wave resonance cone in cold plasma

We consider the power coupled to the plasma from a cylindrical source emitting resonance cones, propagative slow waves which exist in low density magnetized plasmas when the signs of the Stix parameters S and P differ. In this work, we calculate this power for the first time for any collisionality, and show that it remains finite in the cold collisionless limit, even as the radiofrequency electric field itself, and the associated power absorption density, is singular. We give the main parameter dependencies of the coupled power.

Tierens, Wouter [ORNL] (ORCID:0000000269798140)↗
DOE OSTI2024

Increased thermal conductivity and decreased electron–phonon coupling factor of the aluminum scandium intermetallic phase (Al 3 Sc) compared to solid solutions

Aluminum scandium alloys and their intermetallic phases have arisen as potential candidates for the next generation of electrical interconnects. Here, in this work, we measure the in-plane thermal conductivity and electron–phonon coupling factor of aluminum scandium alloy thin films deposited at different temperatures, where the temperature is used to control the grain size and volume fraction of the Al 3 Sc intermetallic phase. As the Al 3 Sc intermetallic formation increases with higher deposition temperature, we measure increasing in-plane thermal conductivity and a decrease in the electron–phonon coupling factor, which corresponds to an increase in grain size. Our findings demonstrate the role that chemical ordering from the formation of the intermetallic phase has on thermal transport.

Chemical elements↗
DOE OSTI2024

Core-edge modeling of gyrokinetic turbulence by coupling the delta-f and total-f models in the XGC code

Whole device gyrokinetic turbulence is modeled using a delta-f model in the core coupled to a total-f model in the edge. This new model is implemented in the gyrokinetic code X-Point Included Gyrokinetic Code (XGC) and works within a single simulation. It employs a canonical Maxwellian background in the core and the usual local Maxwellian in the edge. These different core and edge backgrounds are coupled over an overlap region. A thermal-bath operator is used to keep δf small in the core.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Performant automatic differentiation of local coupled cluster theories: Response properties and ab initio molecular dynamics

In this work, we introduce a differentiable implementation of the local natural orbital coupled cluster (LNO-CC) method within the automatic differentiation framework of the PySCFAD package. The implementation is comprehensively tuned for enhanced performance, which enables the calculation of first-order static response properties on medium-sized molecular systems using coupled cluster theory with single, double, and perturbative triple excitations [CCSD(T)]. We evaluate the accuracy of our method by benchmarking it against the canonical CCSD(T) reference for nuclear gradients, dipole moments, and geometry optimizations. In addition, we demonstrate the possibility of property calculations for chemically interesting systems through the computation of bond orders and Mössbauer spectroscopy parameters for a [NiFe]-hydrogenase active site model, along with the simulation of infrared spectra via ab initio LNO-CC molecular dynamics for a protonated water hexamer.

Chemistry↗
DOE OSTI2024

Ultrafast photoinduced charge carrier dynamics of L-cysteine and oleylamine stabilized CsPbBr3 perovskite quantum dots coupled with gold nanoparticles

We have synthesized L-cysteine and oleylamine stabilized CsPbBr3 perovskite quantum dots (PQDs) and coupled them with gold nanoparticles (AuNPs). The PQDs and AuNPs, as well as their hybrid nanostructures (HNS), were characterized using UV–visible (UV–vis) and photoluminescence (PL) spectroscopy. The UV–vis spectra show absorption bands of the HNS at 503 and 520 nm, attributed mainly to PQDs and AuNPs, respectively. The PQDs show a strong excitonic PL band peaked at 513 nm from PQDs. The HR-TEM results show the formation of hybrid structures between PQDs and AuNPs, which is also supported by the PL quenching of the PQDs by the coupled AuNPs. Ultrafast dynamics of the exciton and charge carriers in the HNS and pristine PQD were studied using femtosecond transient absorption. Multiexponential fitting of the dynamic data revealed the existence of shallow and deep trap states in pristine PQDs and ultrafast electron transfer from PQDs to AuNPs in the HNS. A kinetic model was proposed to account for the key dynamic processes involved and to extract the time for electron transfer from PQDs to AuNPs in the HNS, found to be ∼2 ps. Dynamic processes in pristine PQDs are largely unchanged by HNS formation with AuNPs.

Chemistry↗
DOE OSTI2024

Uncertainty quantification of material parameters in modeling coupled metal and high explosive experiments

Experiments involving the coupling of metal and high explosives (HE) are of notable defense-related interest, and we seek to refine the uncertainty quantification associated with models of such experiments. In particular, our focus is on how uncertainty related to the metal constitutive model challenges our ability to infer high explosive model parameters when analyzing focused science experiments. We consider three focused experiments involving an HE accelerating metal: small plate tests with tantalum/LX-14 and tantalum/LX-17 pairings as well as a tantalum/LX-17 cylinder test. For all three models, we perform sensitivity analysis to ascertain the influence of metal strength on the coupled experimental response. Moreover, we calibrate each model in a Bayesian setting and study the quantification of metal strength on the inference of the HE parameters. Based on our results, we offer guidance for future metal/HE experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Experimental and computational study of phase space dynamics in strongly coupled plasmas with steep density gradients

Understanding how plasmas thermalize when density gradients are steep remains a fundamental challenge in plasma physics, with direct implications for fusion experiments and astrophysical phenomena. Standard hydrodynamic models break down in these regimes, and kinetic theories make predictions that have never been directly tested. Here, we present the first detailed phase-space measurements of a strongly coupled plasma as it evolves from sharp density gradients to thermal equilibrium. Using laser-induced fluorescence imaging of an ultracold calcium plasma, we track the complete ion distribution function f(x,v,t). We discover that commonly used kinetic models (Bhatnagar–Gross–Krook and Lenard–Bernstein) overpredict thermalization rates, even while correctly capturing the initial counterstreaming plasma formation. Our measurements reveal that the initial ion acceleration response scales linearly with electron temperature, and that the simulations underpredict the initial ion response. In our geometry we demonstrate the formation of well-controlled counterpropagating plasma beams. This experimental platform enables precision tests of kinetic theories and opens new possibilities for studying plasma stopping power and flow-induced instabilities in strongly coupled systems.

Bergeson, Scott (ORCID:0000000231249226)↗
DOE OSTI2025

Coupling to rotational manifolds to improve gas-phase pump–probe spectroscopic models

The physical picture of gas-phase optical transitions is normally presented as an isolated two-level system balanced by upward and downward processes. Isolated models assume a phenomenological treatment of collisional dephasing but do not strictly account for collisional population exchange with the rotational baths. While this assumption is valid under low-intensity conditions, where excitation is rate-limiting, isolated models can deviate from Beer’s Law at sufficient pressures and monochromatic intensities when both collisional broadening and power broadening are comparable to (or greater than) lifetime broadening, which are not uncommon conditions for cavity enhanced spectroscopies in the mid-IR spectral range. Although this problem has been addressed by rate-equation models for linear absorption measurements, a general treatment for multi-level quantum mechanical models suitable for non-linear absorption measurements (two-photon/two-color/pump–probe) is lacking. Isolated models require physical parameter inputs that disagree with expected values by at least an order of magnitude. These non-physical models undermine the ability to predict non-linear signal strengths under untested conditions and thereby limit the potential to optimize the sensitivity of non-linear spectroscopies and to expand their analytical applications (e.g., new analytes and/or buffer gases, changes in cavity free-spectral-range, changes in intracavity powers or wavelengths, and accurate investigation of physical phenomena). In this study, we derive bath-coupled models for gaseous pump–probe spectroscopy by application of the quantum Lindblad equation and detailed balance. Bath-coupled models are shown to fit data consistently across variations in intensity and agree with all physically expected values.

Cavity ring-down spectroscopy↗
DOE OSTI2026

Consistent inclusion of triple substitutions within a coupled cluster based static quantum embedding theory

We have previously proposed the MPCC static embedding framework for quantum chemistry that self-consistently couples a high-level coupled cluster (CC) treatment of the fragment (active region) with a lower level, Møller–Plesset perturbation treatment of the environment. Our initial implementation was limited to single and double (SD) substitutions, with CCSD for the fragment and first-order perturbative SD amplitudes for the environment. Here, we extend the MPCC embedding treatment to triple substitutions, which is essential for achieving chemical accuracy in energy differences. To this end, we employ a CCSDT solver for the fragment subsystem. For the environment subsystem, we construct a perturbative estimate of the triples amplitudes, explicitly accounting for feedback from all fragment amplitudes. The resulting approach is denoted MPCCSDT(pt). We further introduce a more complete formulation in which feedback from the environment amplitudes to the fragment amplitudes is also included. This scheme involves an iterative treatment of the environment triples amplitudes and is denoted MPCCSDT(it). In addition, we assess the accuracy of the previously proposed low-level method by introducing a modified low-level approach that incorporates a lowest-order treatment of selected long-range effects, including spin fluctuations and charge polarization. All resulting approaches may be viewed as post-CCSD(T) methods. We therefore consider test cases for which CCSD(T) exhibits substantial deviations from CCSDT. These include (i) single- and triple-bond stretching in F 2 and N 2 , (ii) bond dissociation energies of selected molecules from the W4-11 dataset, and (iii) total atomization energies of transition metal hydrides. Our results demonstrate that inclusion of triples amplitudes at the fragment level alone is insufficient; a perturbative treatment of the environment triples amplitudes is required. For many energy-difference applications, feedback from the environment triples amplitudes to the fragment amplitudes is not essential, but it does play a role in the very challenging CoH and FeH molecules. A very interesting finding from our study is that in some challenging cases, we need an improved (second-order) perturbative method for the SD amplitudes, going beyond the first-order one used in our earlier work. In conclusion, considering both cost and accuracy, the MP2CCSDT(pt) model is the most promising for future applications among the candidates considered here.

Shee, Avijit [University of California, Berkeley, ↗
DOE OSTI2026

Phase field dislocation dynamics formulation coupled with Fourier based micromechanics solver and its application to grain boundary–dislocation interactions

A new phase field dislocation dynamics (PFDD) formulation for homogeneous and heterogeneous materials is presented, which couples micromechanical solvers and the time-dependent Ginzburg–Landau equation. The strain fields are obtained from the micromechanical solver by solving the Lippmann–Schwinger equation and then used to define energy terms to model the evolution of the dislocations. Grain boundary (GB)–dislocation interactions are studied using the coupled PFDD formulation and by describing GBs as inclusions. GB energy and stiffness tensors are computed from molecular statics simulations, and a newly proposed lattice energy term that is dependent on the GB energy is considered in the calculations. Interaction of a screw dislocation with minimum energy and metastable states of low and high angle ⟨110⟩ symmetric tilt grain boundaries are studied. We show good agreement between predictions from our PFDD formulation and molecular dynamics simulations of grain boundary–dislocation interactions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Review and Modeling of Integrated Energy Systems with Nuclear Reactor Coupled Desalination and District Heating

Detailed reviews of a past advanced nuclear reactor based integrated energy system, as well as other nuclear reactor and fossil fuel based integrated energy systems have been performed for this work. Review of the utilization of heat from nuclear reactors for various applications and cogeneration has been done. The heat can be utilized by extraction of the steam from the turbine while the steam is still at a desired temperature. While use of nuclear process heat for district heating in countries like Finland, France, China, Poland, and elsewhere is discussed, more focus of the review has been given on nuclear desalination processes. Integrated energy systems (IES) where distinct types of reactors like PWR, BWR, sodium cooled fast reactor, heavy water reactor and other advanced reactors are coupled with various nuclear desalination processes like multi-effect distillation (MED), multi-stage flashing (MSF) and reverse osmosis (RO) methods have been discussed. The nuclear desalination plant at Aktau has been discussed in more detail due to its decades of successful operation. The IES of the Aktau plant coupled with 5-effect MED desalination plant has been taken as a reference for modeling the Open Modelica (OM) based IES of this work. Here, the OM IES model shows good agreement with the MED plant output of Aktau and can be extended for future applications of IES.

42 ENGINEERING↗
DOE OSTI2024

An Open-Source Coupling for Depletion During Fuel Cycle Modeling

Fuel depletion is an important aspect of fuel cycle modeling, allowing a user to account for how loaded fuel compositions affect in-core and spent fuel compositions and their related fuel cycle metrics. Therefore, multiple methods have been developed to account for depletion within fuel cycle simulations. This work adds to that list of methods by introducing an open-source coupling between C$\scriptsize{YCLUS}$ and OpenMC to perform fuel depletion during a fuel cycle simulation, called OpenMCyclus. This work explains the methodology of OpenMCyclus and presents a benchmark comparison between the performance of OpenMCyclus and another C$\scriptsize{YCLUS}$ archetype that uses recipes to define spent fuel compositions. In conclusion, the development of this coupling expands the functionalities possible through C$\scriptsize{YCLUS}$ by providing real-time fuel depletion that is reactor agnostic and open source.

C$\scriptsize{YCLUS}$↗
DOE OSTI2025

Optimization of simulated high-field side lower hybrid current drive coupling using machine learning predictions of scrape-off layer density

Lower hybrid current drive (LHCD) is a potential source of non-inductive off-axis current drive (CD) for tokamaks. Although LHCD has been successfully deployed on a number of tokamaks, it is highly sensitive to the scrape-off layer (SOL) conditions local to the LHCD launcher. Large gaps between the launcher and plasma core, SOL turbulence, or edge density perturbations due to edge-localized modes can hamper CD or cause large reflected power. These coupling issues in part motivated the installation of an LHCD launcher on the high-field side (HFS) of DIII-D. On the HFS, the SOL is less turbulent and more controllable compared to the low-field side. This quiescence may result in more predictable edge conditions and thus a more predictable CD. Here, in this work, HFS SOL reflectometry measurements are predicted from global plasma parameters using machine learning models. The SOL predictions coupled with the full-wave simulation of the LHCD launcher allow for the prediction of reflected power, directivity, and arcing risk before the discharge. Launcher performance is then optimized using multi-objective Bayesian optimization, finding the shot parameters that result in an optimal SOL density that maximizes CD while minimizing the risk of arcing. The predictions and optimizations of LHCD performance are then accelerated using a surrogate model of the full-wave LHCD simulation.

Bayesian optimization↗
DOE OSTI2024

Transport and losses of energetic particles in tokamaks in the presence of Alfvén activity using the new full orbit TAPaS code coupled to FAR3d

Recent developments and tools integrated into the TAPaS code are presented, enabling realistic scenario simulations of particle dynamics within experimental tokamak magnetic equilibria. In particular, the enhanced capabilities of TAPaS enable seamless coupling with external simulations, provided the metric and equilibrium magnetic field of the external code are known. Coupling TAPaS with the gyro-fluid code FAR3d, the transport and losses of energetic particles in the presence Alfvén eigenmodes (AEs) in DIII-D plasma discharge #159243 were investigated. Detailed analyses of prompt losses with and without collisions were performed. Then, further analysis was performed in the presence of electromagnetic perturbations resulting from AEs activity. The results indicate that, for the energies and the initial conditions considered here, the presence of AEs enhances the particle losses.

Alfven eigenmodes↗
DOE OSTI2024

Advances in the Large Area Picosecond Photo-Detector (LAPPD TM ): 8" × 8" MCP-PMT with Capacitively Coupled Readout

Abstract We present advances made in the Large Area Picosecond Photodetector (LAPPD), an 8" × 8" microchannel plate photomultiplier tube (MCP-PMT), since pilot production was initiated at Incom, Inc. in 2018. The Gen-I LAPPD utilizes a stripline anode for direct charge readout. The novel Gen-II LAPPD employs an internal resistive thin-film which capacitively couples to a customizable external signal readout board, streamlining production and increasing customer flexibility. The Gen-II LAPPD, with an active area of 373 cm 2 , is capable of high single photoelectron (PE) gain of ∼10 7 , low dark rates (∼1 kHz/cm 2 ), single PE (SPE) timing resolution of ∼65 ps, and 𝒪(mm) position resolution. Coupled with a UV-grade fused silica window, the LAPPD features a high quantum efficiency (QE) bialkali photocathode of >30% at 365 nm with spectral response down to ∼165 nm. The LAPPD is an excellent candidate for electromagnetic calorimeter (ECAL) timing layers, photon-based neutrino detectors, high energy collider experiments, medical imaging systems, and nuclear non-proliferation applications.

Instruments & Instrumentation↗