Search NASA⌕ Search

SEARCH · Search NASA

Results for “DELTA PROGRAM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Abort Options for Human Lunar Missions between Earth Orbit and Lunar Vicinity

Apollo mission design emphasized operational flexibility that supported premature return to Earth. However, that design was tailored to use expendable hardware for short expeditions to low-latitude sites and cannot be applied directly to an evolutionary program requiring long stay times at arbitrary sites. This work establishes abort performanc e requirements for representative onorbit phases of missions involvin g rendezvous in lunar-orbit, lunar-surface and at the Earth-Moon libr ation point. This study submits reference abort delta-V requirements and other Earth return data (e.g., entry speed, flight path angle) and also examines the effect of abort performance requirements on propul sive capability for selected vehicle configurations.

Condon, Gerald L.↗

Delta VLBI spacecraft tracking system demonstration. Part 1: Design and planning

The current status of planned delta very long base interferometry (VLBI) navigation during Voyager Jupiter encounters is discussed. It is indicated that angular accuracies of 0.05 microrads are possible and that near real time data transmission can be achieved with minimal station hardware and software modifications. A software correlator and phase tracking program, operating on the SFOF IBM 360, used for data processing is described.

Brunn, D. L.↗

Historical trend in the research and development of aircraft

Results are presented from a study of aircraft design trends undertaken to determine the relationship between research, development, test and evaluation and aircraft mission capability, requirements and objectives. It is shown that while in some cases a performance objective was the primary research driver, research was the driver in the formulation of objectives in others. Among the topics discussed are: (1) speed considerations such as compressibility, propulsion and test techniques; (2) airframe considerations such as swept, delta, trapezoidal and variable-sweep planforms and mission commonality; (3) research aircraft; (4) the recent impact of computer-aided design; (5) Soviet aircraft development approaches and (6) a comparison of Soviet and U.S. military aircraft design trends. Attention is given to experimental and prototype aircraft programs which, although cancelled, anticipated significant subsequent developments.

Spearman, M. L.↗

Measurements of the anisotropy of the cosmic background radiation and diffuse galactic emission at millimeter and submillimeter wavelengths

The results of a balloon-borne observing program to measure the large angular scale brightness distribution of the 2.7 K cosmic background radiation (CBR) at millimeter and submillimeter wavelengths are reported. A new determination of the dipole anisotropy of the CBR is found with 3.40 + or - 0.42 mK toward alpha = 12.1 + or - 0.24 hr, delta = - 23 + or - 5 deg in a 1.2 to 8/cm band and 4.7 + or - 1.4 mK toward alpha = 9.9 + 1.7 or - 1.1 hr, delta = - 38 + or - 21 deg between 5 and 18/cm, where the amplitudes are listed as thermodynamic temperatures. New estimates of the absolute temperature in these two bands of 2.86 + or - 0.26 K and 3.01 + or - 0.31 are obtained under the assumption that the CBR has a Planck spectrum. The diffuse Galactic emission is fitted by a secant distribution in Galactic latitude, and the resulting Galactic pole antenna temperatures are given. Maps of sky brightness, measurements of zodiacal emission, and measurements of fluctuations of the atmospheric emission which dominates the noise budget are also presented.

Halpern, Mark↗

Contingency study for the third international Sun-Earth Explorer (ISEE-3) satellite

The third satellite of the international Sun-Earth Explorer program was inserted into a periodic halo orbit about L sub 1, the collinear libration point between the Sun and the Earth-Moon barycenter. A plan is presented that was developed to enable insertion into the halo orbit in case there was a large underperformance of the Delta second or third stage during the maneuver to insert the spacecraft into the transfer trajectory. After one orbit of the Earth, a maneuver would be performed near perigee to increase the energy of the orbit. A relatively small second maneuver would put the spacecraft in a transfer trajectory to the halo orbit, into which it could be inserted for a total cost within the fuel budget. Overburns (hot transfer trajectory insertions) were also studied.

Dunham, D. W.↗

Simulation of the Galileo spacecraft axial - Delta-V algorithm

Preliminary results are presented from the analysis of the Galileo spacecraft axial delta-V algorithm. The Galileo spacecraft is a dual spin interplanetary spacecraft which will study the four Galilean moons of Jupiter as well as the Jovian environment and atmosphere. In order to achieve orbit about Jupiter and accurately deliver the probe to the planet's upper atmosphere, the Galileo spacecraft must be capable of performing many trajectory corrections or delta-V maneuvers. Twelve 10 Newton thrusters and one 400 Newton engine are utilized for this purpose. There are many maneuver modes and control algorithms available to the spacecraft. In this paper only the analysis of the axial delta-V algorithm will be discussed. The analysis consists of two parts: an analytic study and a simulation study. The analytic results are based on rigid body dynamics, while the simulation includes the first order effect of the flexible magnetometer boom and nutation damper. The simulation utilizes a program developed at JPL which allows flexible body effects to be simulated by modeling a collection of rigid bodies attached together by hinges, springs and dampers. In this preliminary study of the Galileo only two rigid bodies were used in the simulation, but many more can and will be used in the final tests. In this analysis, the algorithm appears to be working correctly and the analytic and simulation results agree very well.

Longuski, J. M.↗

Program Helps Simulate Neural Networks

Neural Network Environment on Transputer System (NNETS) computer program provides users high degree of flexibility in creating and manipulating wide variety of neural-network topologies at processing speeds not found in conventional computing environments. Supports back-propagation and back-propagation-related algorithms. Back-propagation algorithm used is implementation of Rumelhart's generalized delta rule. NNETS developed on INMOS Transputer(R). Predefines back-propagation network, Jordan network, and reinforcement network to assist users in learning and defining own networks. Also enables users to configure other neural-network paradigms from NNETS basic architecture. Small portion of software written in OCCAM(R) language.

Villarreal, James↗

Analysis of Vegetation Index Variations and the Asian Monsoon Climate

Vegetation growth depends on local climate. Significant anthropogenic land cover and land use change activities over Asia have changed vegetation distribution as well. On the other hand, vegetation is one of the important land surface variables that influence the Asian Monsoon variability through controlling atmospheric energy and water vapor conditions. In this presentation, the mean and variations of vegetation index of last decade at regional scale resolution (5km and higher) from MODIS have been analyzed. Results indicate that the vegetation index has been reduced significantly during last decade over fast urbanization areas in east China, such as Yangtze River Delta, where local surface temperatures were increased significantly in term of urban heat Island. The relationship between vegetation Index and climate (surface temperature, precipitation) over a grassland in northern Asia and over a woody savannas in southeast Asia are studied. In supporting Monsoon Asian Integrated Regional Study (MAIRS) program, the data in this study have been integrated into Giovanni, the online visualization and analysis system at NASA GES DISC. Most images in this presentation are generated from Giovanni system.

Shen, Sunhung↗

PredGuid+A: Orion Entry Guidance Modified for Aerocapture

PredGuid+A software was developed to enable a unique numerical predictor-corrector aerocapture guidance capability that builds on heritage Orion entry guidance algorithms. The software can be used for both planetary entry and aerocapture applications. Furthermore, PredGuid+A implements a new Delta-V minimization guidance option that can take the place of traditional targeting guidance and can result in substantial propellant savings. PredGuid+A allows the user to set a mode flag and input a target orbit's apoapsis and periapsis. Using bank angle control, the guidance will then guide the vehicle to the appropriate post-aerocapture orbit using one of two algorithms: Apoapsis Targeting or Delta-V Minimization (as chosen by the user). Recently, the PredGuid guidance algorithm was adapted for use in skip-entry scenarios for NASA's Orion multi-purpose crew vehicle (MPCV). To leverage flight heritage, most of Orion's entry guidance routines are adapted from the Apollo program.

Lafleur, Jarret↗

Development of PNNL’s Plutonium Metallography Capability

The goal of this project was to develop plutonium metallography capabilities and establish workflows for characterization at PNNL’s Radiological Processing Facility (RPL). Developing and expanding on this capability opens more opportunities for PNNL to better support science through collaborations with other labs, plants, and sites withing the Department of Energy Complex and through programs within the National Nuclear Security Administration. This project established metallography equipment in an air glovebox, polishing protocols, as well as radiological and facility controls and procedures so that gram quantities of plutonium metal could be analyzed on multiple characterization tools. Data was collected and analyzed on two different delta phase plutonium - Gallium samples and a calciothermically reduced alpha plutonium metal using a combination of optical and electron microscopy, powder X-ray diffraction, and atom probe tomography. This report highlights the metallography capabilities, some preliminary data collections, and plans at PNNL to support plutonium material science.

36 MATERIALS SCIENCE↗

Data development for ASTM E24.06.02 round robin program on instability prediction

Basis data for use in an ASTM E24.06.02 task group round robin activity was developed. Compact specimens were made of 2024-T351, 7075-T651 aluminum alloys, and 304 stainless steel. All were 12.7 mm thick and planar dimension variables incorporated were for 1T, 2T and 4T sizes. Representative raw data for each material and specimen size are contained herein. R-curves plotted in terms of delta a physical and delta a effective are plotted for each material.

Mccabe, D. E.↗

Program LRCDM2: Improved aerodynamic prediction program for supersonic canard-tail missiles with axisymmetric bodies

Program LRCDM2 was developed for supersonic missiles with axisymmetric bodies and up to two finned sections. Predicted are pressure distributions and loads acting on a complete configuration including effects of body separated flow vorticity and fin-edge vortices. The computer program is based on supersonic panelling and line singularity methods coupled with vortex tracking theory. Effects of afterbody shed vorticity on the afterbody and tail-fin pressure distributions can be optionally treated by companion program BDYSHD. Preliminary versions of combined shock expansion/linear theory and Newtonian/linear theory have been implemented as optional pressure calculation methods to extend the Mach number and angle-of-attack ranges of applicability into the nonlinear supersonic flow regime. Comparisons between program results and experimental data are given for a triform tail-finned configuration and for a canard controlled configuration with a long afterbody for Mach numbers up to 2.5. Initial tests of the nonlinear/linear theory approaches show good agreement for pressures acting on a rectangular wing and a delta wing with attached shocks for Mach numbers up to 4.6 and angles of attack up to 20 degrees.

Dillenius, Marnix F. E.↗

Evolution of a high-performance storage system based on magnetic tape instrumentation recorders

In order to provide transparent access to data in network computing environments, high performance storage systems are getting smarter as well as faster. Magnetic tape instrumentation recorders contain an increasing amount of intelligence in the form of software and firmware that manages the processes of capturing input signals and data, putting them on media and then reproducing or playing them back. Such intelligence makes them better recorders, ideally suited for applications requiring the high-speed capture and playback of large streams of signals or data. In order to make recorders better storage systems, intelligence is also being added to provide appropriate computer and network interfaces along with services that enable them to interoperate with host computers or network client and server entities. Thus, recorders are evolving into high-performance storage systems that become an integral part of a shared information system. Data tape has embarked on a program with the Caltech sponsored Concurrent Supercomputer Consortium to develop a smart mass storage system. Working within the framework of the emerging IEEE Mass Storage System Reference Model, a high-performance storage system that works with the STX File Server to provide storage services for the Intel Touchstone Delta Supercomputer is being built. Our objective is to provide the required high storage capacity and transfer rate to support grand challenge applications, such as global climate modeling.

Peters, Bruce↗

Simulating a Tailless Re-Entry Vehicle

Virtual Flight - RITE (Rapid Integration Test Environment) is a NASA program devoted to the development of rapid prototyping technology for the design of aerospace vehicles. In the fourth simulation entry in this series of projects, a Crew Transfer Vehicle concept design developed at NASA-Ames Research Center was simulated. This concept vehicle, known as CTV8, is a delta-wing design with sharp leading edges to improve the hypersonic lift-to-drag ratio (L/D). Control surfaces included ailerons and elevators on the trailing edge of the wing, a rudder on the trailing edge of the vertical tail, and upper and lower body flaps (on the aft upper and lower edges of the fuselage) for speed control.

Bunell, John W.↗

Wind Prelaunch Mission Operations Report (MOR)

The National Aeronautics and Space Administration (NASA) Wind mission is the first mission of the Global Geospace Science (GGS) initiative. The Wind laboratory will study the properties of particles and waves in the region between the Earth and the Sun. Using the Moon s gravity to save fuel, dual lunar swing-by orbits enable the spacecraft to sample regions close to and far from the Earth. During the three year mission, Wind will pass through the bow shock of Earth's magnetosphere to begin a thorough investigation of the solar wind. Mission objectives require spacecraft measurements in two orbits: lunar swing- by ellipses out to distances of 250 Earth radii (RE) and a small orbit around the Lagrangian point L-l that remains between the Earth and the Sun. Wind will be placed into an initial orbit for approximately 2 years. It will then be maneuvered into a transition orbit and ultimately into a halo orbit at the Earth-Sun L-l point where it will operate for the remainder of its lifetime. The Wind satellite development was managed by NASA's Goddard Space Flight Center with the Martin Marietta Corporation, Astro-Space Division serving as the prime contractor. Overall programmatic direction was provided by NASA Headquarters, Office of Space Science. The spacecraft will be launched under a launch service contract with the McDonnell Douglas Corporation on a Delta II Expendable Launch Vehicle (ELV) within a November l-l4, 1994 launch window. The Wind spacecraft carries six U.S. instruments, one French instrument, and the first Russian instrument ever to fly on an American satellite. The Wind and Polar missions are the two components of the GGS Program. Wind is also the second mission of the International Solar Terrestrial Physics (ISTP) Program. The first ISTP mission, Geotail, is a joint project of the Institute of Space and Astronautical Science of Japan and NASA which launched in 1992. The Wind mission is planned to overlap Geotail by six months and Polar by one year. The Wind and Polar missions, together with the Geotail mission (launched on July 24, 1992) and supporting equatorial measurements, will provide simultaneous data to enable the study of solar wind input to the magnetosphere and key elements of the magnetospheric response: ring current energy storage, geomagnetic tail energy storage, and ionospheric energy input.

Source record↗

The Mars Sample Return Project

The Mars Sample Return (MSR) Project is underway. A 2003 mission to be launched on a Delta III Class Vehicle and a 2005 mission launched on an Ariane 5 will culminate in carefully selected Mars samples arriving on Earth in 2008.

Mars↗

Status and Prospects of Di-jet Production in High-energy Polarized Proton-Proton Collisions at RHIC at {radical}(s) = 200 GeV

The STAR experiment at the Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Laboratory (BNL) is carrying out a spin physics program colliding transversely or longitudinally polarized proton beams at {radical}(s) = 200-500 GeV to gain deeper insight into the spin structure and dynamics of the proton. These studies provide fundamental insight into Quantum Chromodynamics (QCD). One of the main objectives is the determination of the polarized gluon distribution function, {delta}g, through the measurement of the longitudinal double-spin asymmetry, A{sub LL}, for various processes. Inclusive hadron and jet production from polarized pp collision data collected so far at {radical}(s) = 200 GeV using the STAR detector at RHIC have placed important constraints on {delta}g. Di-jet production provides direct access to the initial parton kinematics at leading order (LO) QCD and thus provides sensitivity to the Bjorken-x dependence of {delta}g. The status of the mid-rapidity di-jet cross section analysis from the 2005 RHIC run and the longitudinal double-spin asymmetry at mid-rapidity for the 2006 data sample are discussed in these proceedings. Projections on future di-jet measurements at STAR are provided.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Innovative Divertor Development to Solve the Plasma Heat-Flux Problem

Large, localized plasma heat exhaust continues to be one of the critical problems for the development of tokamak fusion reactors. Excessive heat flux erodes and possibly melts plasma-facing materials, thereby dramatically shortening their lifetime and increasing the impurity contamination of the core plasma. A detailed assessment by the ITER team for their divertor has revealed substantial limitations on the operational space imposed by the divertor performance. For a fusion reactor, the problem becomes worse in that the divertor must accommodate 20% of the total fusion power (less any broadly radiated loss), while not allowing excess buildup of tritium in the walls nor excessive impurity production. This is an extremely challenging set of problems that must be solved for fusion to succeed as a power source; it deserves a substantial research investment. Material heat-flux constraints: Results from present-day tokamaks show that there are two major limitations of peak plasma heat exhaust. The first is the continuous flow of power to the divertor plates and nearby surfaces that, for present technology, is limited to 10-20 MW/m{sup 2}. The second is the transient peak heat-flux that can be tolerated in a short time, {tau}{sub m}, before substantial ablation and melting of the surface occurs; such common large transient events are Edge Localized Mode (ELMs) and disruptions. The material limits imposed by these events give a peak energy/{tau}{sub m}{sup 1/2} parameter of {approx} 40 MJ/m{sup 2}s{sup 1/2} [1]. Both the continuous and transient limits can be approached by input powers in the largest present-day devices, and future devices are expected to substantially exceed the limits unless a solution can be found. Since the early 90's LLNL has developed the analytic and computational foundation for analyzing divertor plasmas, and also suggested and studied a number of solid and liquid material concepts for improving divertor/wall performance, with the most recent being the Snowflake divertor concept [2] and generating Resonant Magnetic Perturbations by the SOL currents [3]. However, the specific approaches discussed here are part of a wider class of innovative divertor ideas that have come from the community in the last several years, and we certainly advocate the need to consider a range of options. Indeed, the most effective solution to the heat-flux problem may well contain features of various ideas. For example, there are the X-divertor (Kotschenreuther et al. [4]) that expands the magnetic flux surface in the vicinity of the near-X-point divertor plate, and the super X-divertor (Valanju et al. [5]) that guides the near-separatrix SOL flux tubes to a larger major radius to increase the surface area available for power deposition. These approaches have the common feature of manipulation of the edge magnetic geometry. Another approach is the use of liquid divertor surfaces that can increase the heat-flux capability by flowing the heated material to a cooling region and eventually out of the machine, and/or by being able to withstand a higher peak heat flux [6]. All of these areas are only emerging concepts that require substantially more analysis and definitive experimental tests, and given the need for a large improvement in this area, we advocate a substantial program to systematically assess the approaches. Because of space limitation here, we present some details of one of the concepts, namely the Snowflake divertor configuration. The Snowflake (SF) divertor [2] exploits a tokamak geometry in which the poloidal magnetic field varies quadratically with distance from the X-point null, {Delta}r. The name stems from the characteristic hexagonal, snowflake-like, shape of the multi-branched separatrix for this exact second-order null. In contrast, the standard X-point configuration has a poloidal field varying linearly with ?r. The different variations mean that a flux expansion is much larger in the vicinity of a null of a snowflake divertor, and one can try to exploit this fact for reducing the divertor heat load. A unique feature here is also that the shear in the magnetic field near the X-point is substantially larger for the SF configuration, which may favorably affect microinstabilities and ELMs. Practical realization appears straightforward; the SF can be obtained using existing poloidal field coils in various present-day devices, and in general can be produced with coils located well outside the vacuum vessel. The SF configuration increases the flux expansion near the X-point that can be exploited by some increase in the plate wetted area, longer field-line length, and larger volume for impurity radiation. Initial UEDGE simulations comparing the SF with the standard divertor for the same conditions show a reduction in the peak heat flux for the SF of {approx}1.2-1.6 when comparing cases for the same angle of the total magnetic field to the divertor plate [7].

29 ENERGY PLANNING, POLICY, AND ECONOMY↗