Search NASA⌕ Search

SEARCH · Search NASA

Results for “DISPLAY DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Microstructures of the silicon carbide nanowires obtained by annealing the mechanically-alloyed amorphous powders

Silicon, graphite and boron nitride powders were mechanically alloyed for 40 h in argon. The as-milled powders were annealed at 1700 °C in nitrogen for 30 min. The annealed powders are covered by a thick layer of gray–green SiC nanowires, which are 300 nm to 1000 nm in diameter and several hundred microns in length. Trace iron in the raw powders acts as a catalyst, promoting the V–L–S process. It follows that the actual substances contributing to the growth of the SiC nanowires may be silicon, graphite and the metal impurities in the raw powders. The results from HRTEM and XRD reveal that the products contain both straight α/β-SiC nanowires and nodular α/β-SiC nanochains. It is interestingly found that 6H–SiC coexists with 3C–SiC in one nodular nanowire. This novel structure may introduce periodic potential field along the longitudinal direction of the nanowires, and may find applications in the highly integrated optoelectronic devices. - Graphical abstract: Display Omitted - Highlights: • SiC nanowires were prepared by annealing the mechanically alloyed amorphous powders. • SiC nanowires are 300 nm to 1000 nm in diameter and several hundred microns in length. • The products contain both straight α/β-SiC nanowires and nodular α/β-SiC nanochains. • Trace Fe in the raw powders acts as a catalyst, promoting the V–L–S process. • 6H–SiC coexists with 3C–SiC in one nodular SiC nanowire.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural, morphological and optical investigations on BaMgAl{sub 10}O{sub 17}:Eu{sup 2+} elaborated by a microwave induced solution combustion synthesis

Graphical abstract: Graphical abstract (with Research highlights). This is a paragraph for graphical abstract. Research highlights: {yields} Synthesis of BAM:Eu{sup 2+} by MISCS using different fuel to oxidizer molar ratios. {yields} Both blue and red phosphors were obtained. {yields} Majority of blue phosphors was obtained for fuel-rich synthesis. {yields} A specific morphology was observed for each contribution. -- Abstract: Blue-emitting Eu{sup 2+}-doped barium magnesium aluminate (BaMgAl{sub 10}O{sub 17}:Eu{sup 2+}) for advanced displays and lighting devices was prepared by a microwave induced solution combustion synthesis using urea as combustion fuel and nitrates as oxidizer. Purity control of as-synthesized blue phosphor particles was undertaken by modifying the fuel to oxidizer molar ratio. X-ray diffraction, scanning electron microscopy and photoluminescence were used to investigate powders crystallinity, particles size, morphology and luminescent properties, respectively. Fuel-rich urea reactions preferentially lead to pure phases compared to the powders synthesized with a stoichiometric fuel to oxidizer ratio. In both cases, we produce a nearly pure well-crystallized and nanostructured BaMgAl{sub 10}O{sub 17}:Eu{sup 2+}. Photoluminescence measurements exhibit the characteristic blue emission of Eu{sup 2+} under UV light excitation however a weak red emission associated to Eu{sup 3+} is also detected.

36 MATERIALS SCIENCE↗

Modification of Carbon Nitride/Reduced Graphene Oxide van der Waals Heterostructure with Copper Nanoparticles To Improve CO 2 Sensitivity

Carbon nitride/reduced graphene oxide (rGO) van der Waals heterostructures (vdWH) have previously shown exceptional oxygen sensitivity via a photoredox mechanism, making it a potential material candidate for various applications such as oxygen reduction reaction catalysis and oxygen sensing. In this work, the electronic structure of a carbon nitride/rGO composite is modified through the introduction of copper nanoparticles (NPs). When incorporated into a chemiresistor device, this vdWH displayed a newfound CO 2 sensitivity. The effects of humidity and light were investigated and found to be crucial components for the CO 2 sensitivity. Density functional theory calculations performed on a carbon nitride/copper NP@rGO model system found an enhanced stabilization of CO 2 caused by H-bonds between the carbon nitride layer and chemisorbed CO 2 on copper, pointing to the important role played by humidity. The synergetic effect between the carbon nitride layer interfaced with CuNP@rGO, in combination with humidity and light (395 nm) irradiation, is found to be responsible for the newfound sensitivity toward CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reversible hydrogen control of antiferromagnetic anisotropy in α-Fe 2 O 3

Antiferromagnetic insulators are a ubiquitous class of magnetic materials, holding the promise of low-dissipation spin-based computing devices that can display ultra-fast switching and are robust against stray fields. However, their imperviousness to magnetic fields also makes them difficult to control in a reversible and scalable manner. Here we demonstrate a novel proof-of-principle ionic approach to control the spin reorientation (Morin) transition reversibly in the common antiferromagnetic insulator α-Fe 2 O 3 (haematite) - now an emerging spintronic material that hosts topological antiferromagnetic spin-textures and long magnon-diffusion lengths. We use a low-temperature catalytic-spillover process involving the post-growth incorporation or removal of hydrogen from α-Fe 2 O 3 thin films. Hydrogenation drives pronounced changes in its magnetic anisotropy, Néel vector orientation and canted magnetism via electron injection and local distortions. We explain these effects with a detailed magnetic anisotropy model and first-principles calculations. Tailoring our work for future applications, we demonstrate reversible control of the room-temperature spin-state by doping/expelling hydrogen in Rh-substituted α-Fe 2 O 3 .

36 MATERIALS SCIENCE↗

Influence of the molecular weight and size distribution of PSS on mixed ionic-electronic transport in PEDOT:PSS

The commercially available polyelectrolyte complex poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) is ubiquitous in organic and hybrid electronics. As such, it has often been used as a benchmark material for fundamental studies and the development of new electronic devices. Yet, most studies on PEDOT:PSS have focused on its electronic conductivity in dry environments, with less consideration given to its ion transport, coupled ionic-electronic transport, and charge storage properties in aqueous environments. These properties are essential for applications in bioelectronics (sensors, actuators), charge storage devices, and electrochromic displays. Importantly, past studies on mixed ionic-electronic transport in PEDOT:PSS neglected to consider how the molecular structure of PSS affects mixed ionic-electronic transport. Herein, we therefore investigated the effect of the molecular weight and size distribution of PSS on the electronic properties and morphology of PEDOT:PSS both in dry and aqueous environments, and overall performance in organic electrochemical transistors (OECTs). Using reversible addition–fragmentation chain transfer (RAFT) polymerization with two different chain transfer agents, six PSS samples with monomodal, narrow (D = 1.1) and broad (D = 1.7) size distributions and varying molecular weights were synthesized and used as matrices for PEDOT. We found that using higher molecular weight of PSS (Mn = 145 kg mol –1 ) and broad dispersity led to OECTs with the highest transconductance (up to 16 mS) and [μC*] values (~140 F cm –1 V –1 s –1 ) in PEDOT:PSS, despite having a lower volumetric capacitance (C* = 35 ± 4 F cm –3 ). The differences were best explained by studying the microstructure of the films by atomic force microscopy (AFM). We found that heterogeneities in the PEDOT:PSS films (interconnected and large PEDOT- and PSS-rich domains) obtained from high molecular weight and high dispersity PSS led to higher charge mobility (μOECT ~4 cm 2 V –1 s –1 ) and hence transconductance. Furthermore, these studies highlight the importance of considering molecular weight and size distribution in organic mixed ionic-electronic conductor, and could pave the way to designing high performance organic electronics for biological interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning the electronic coupling in a low-bandgap donor-acceptor copolymer via the placement of side-chains

We present a spectroscopic and theoretical investigation of the effect of the presence and position of hexyl side-chains in the novel low-bandgap alternating donor-acceptor copolymer poly[bis-N,N-(4-octylphenyl)-bis-N,N-phenyl-1, 4-phenylenediamine-alt-5,5'-4',7',-di-2-thienyl-2',1',3'-benzothiadiazole] (T8TBT). We use electronic absorption and Raman spectroscopic measurements supported by calculations of chain conformation, electronic transitions, and Raman modes. Using these tools, we find that sterically demanding side-chain configurations induce twisting in the electronic acceptor unit and reduce the electronic interaction with the donor. This leads to a blue-shifted and weakened (partial) charge-transfer absorption band together with a higher photoluminescence efficiency. On the other hand, sterically relaxed side-chain configurations promote coupling between donor and acceptor units and exhibit enhanced absorption at the expense of luminescence efficiency. The possibility of tuning the donor-acceptor character of conjugated polymers by varying the placement of side-chains has very important ramifications for light emitting diode, Laser, display, and photovoltaic device optimization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improvement on electrical conductivity and electron field emission properties of Au-ion implanted ultrananocrystalline diamond films by using Au-Si eutectic substrates

In the present work, Au-Si eutectic layer was used to enhance the electrical conductivity/electron field emission (EFE) properties of Au-ion implanted ultrananocrystalline diamond (Au-UNCD) films grown on Si substrates. The electrical conductivity was improved to a value of 230 (Ω cm){sup −1}, and the EFE properties was enhanced reporting a low turn-on field of 2.1 V/μm with high EFE current density of 5.3 mA/cm{sup 2} (at an applied field of 4.9 V/μm) for the Au-UNCD films. The formation of SiC phase circumvents the formation of amorphous carbon prior to the nucleation of diamond on Si substrates. Consequently, the electron transport efficiency of the UNCD-to-Si interface increases, thereby improving the conductivity as well as the EFE properties. Moreover, the salient feature of these processes is that the sputtering deposition of Au-coating for preparing the Au-Si interlayer, the microwave plasma enhanced chemical vapor deposition process for growing the UNCD films, and the Au-ion implantation process for inducing the nanographitic phases are standard thin film preparation techniques, which are simple, robust, and easily scalable. The availability of these highly conducting UNCD films with superior EFE characteristics may open up a pathway for the development of high-definition flat panel displays and plasma devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Anomalous temperature dependence of layer spacing of de Vries liquid crystals: Compensation model

Smectic liquid crystals that exhibit temperature independent layer thickness offer technological advantages for their use in displays and photonic devices. The dependence of the layer spacing in SmA and SmC phases of de Vries liquid crystals is found to exhibit distinct features. On entering the SmC phase, the layer thickness initially decreases below SmA to SmC (T{sub A–C}) transition temperature but increases anomalously with reducing temperature despite the molecular tilt increasing. This anomalous observation is being explained quantitatively. Results of IR spectroscopy show that layer shrinkage is caused by tilt of the mesogen's rigid core, whereas the expansion is caused by the chains getting more ordered with reducing temperature. This mutual compensation arising from molecular fragments contributing to the layer thickness differs from the previous models. The orientational order parameter of the rigid core of the mesogen provides direct evidence for de Vries cone model in the SmA phase for the two compounds investigated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Highly repeatable room temperature negative differential resistance in AlN/GaN resonant tunneling diodes grown by molecular beam epitaxy

AlN/GaN resonant tunneling diodes grown on low dislocation density semi-insulating bulk GaN substrates via plasma-assisted molecular-beam epitaxy are reported. The devices were fabricated using a six mask level, fully isolated process. Stable room temperature negative differential resistance (NDR) was observed across the entire sample. The NDR exhibited no hysteresis, background light sensitivity, or degradation of any kind after more than 1000 continuous up-and-down voltage sweeps. The sample exhibited a ∼90% yield of operational devices which routinely displayed an average peak current density of 2.7 kA/cm{sup 2} and a peak-to-valley current ratio of ≈1.15 across different sizes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

In Vitro Dermal Safety Assessment of Silver Nanowires after Acute Exposure: Tissue vs. Cell Models

Silver nanowires (AgNW) are attractive materials that are anticipated to be incorporated into numerous consumer products such as textiles, touchscreen display, and medical devices that could be in direct contact with skin. There are very few studies on the cellular toxicity of AgNW and no studies that have specifically evaluated the potential toxicity from dermal exposure. To address this question, we investigated the dermal toxicity after acute exposure of polymer-coated AgNW with two sizes using two models, human primary keratinocytes and human reconstructed epidermis. In keratinocytes, AgNW are rapidly and massively internalized inside cells leading to dose-dependent cytotoxicity that was not due to Ag + release. Analysing our data with different dose metrics, we propose that the number of NW is the most appropriate dose-metric for studies of AgNW toxicity. In reconstructed epidermis, the results of a standard in vitro skin irritation assay classified AgNW as non-irritant to skin and we found no evidence of penetration into the deeper layer of the epidermis. The findings show that healthy and intact epidermis provides an effective barrier for AgNW, although the study does not address potential transport through follicles or injured skin. The combined cell and tissue model approach used here is likely to provide an important methodology for assessing the risks for skin exposure to AgNW from consumer products.

3D reconstructed epidermis model↗

Illuminated display panel is easily changed

Photographic negative placed between two plastic sheets and back-lighted in selected areas prepares illuminated multicolored display panels. The device is inexpensive, easily changed, and quickly fabricated.

Source record↗

Computer control of a far infrared interferometer

A simple interface has been designed for the automatic control and data collection from a Grubb Parsons Mark III cube interferometer. A computer is used to automatically step the movable mirror on the interferometer. Data may be directly input into the computer for immediate transformation or stored for later analysis via a fast Fourier transformation. The interface is based on a commercial analog-to-digital converter having a parallel-to-serial data converter. The device can also display ASCII characters sent from the computer in parallel binary code. The system is applicable to recording interferograms having long time durations and to measuring multiple interferograms for statistical averaging.

Breecher, J.↗

Ultraviolet /UV/ emission line mapping of selected regions in the Orion Nebula

Digital processing of data from the International Ultraviolet Explorer (IUE) satellite are used to obtain monochromatic mosaic images of the most prominent UV spectra lines at 35 locations in the central region of the Orion Nebula. The image processing techniques include calculations of the spectrograph orientation and the thermal effects, normalization for exposure time, background subtraction, correction for sensitivity variation within the IUE spectrograph aperture, correction to an absolute flux scale, sample interpolation, and display on graphic devices. The resulting UV emission line intensity maps may be used in conjunction with observations of other wavelength regions to determine the spatial distribution of ionization and abundance levels of carbon and oxygen in Orion.

Turnrose, B. E.↗

The state of the art of general aviation autopilots - Now and in the future

A study was performed under contract with NASA-Langley Research Center to document the state of the art of general aviation (GA) autopilots and provide information about the current status of GA autopilot technology. Results are based on findings obtained from general and product literature, as well as interviews with manufacturers, users and service centers. The autopilot systems are divided into three categories - wing leveler, automatic, and integrated flight control systems, and a listing of currently available autopilots and their available options is presented. Various autopilot components are discussed, such as the display, data entry devices, and computers; gyroscopes, altitude sensors, airspeed sensors and accelerometers are presented as the primary sensor types. Electromechanical servos, pneumatic and hydraulic actuators are compared in their ability to improve airframe response. Recommendations concerning potential areas of further research and possible areas of improvement are also presented.

Roskam, J.↗

Fault structures in rapidly quenched Ni-Mo binary alloys

Fault structures in two Ni-Mo alloy ribbons (Ni-28 at. pct Mo and Ni-35 at. pct Mo) cast by a free jet chill block melt spinning process were studied. Thin foils for TEM studies were made by electrochemical thinning using an alcohol/butyl cellosolve/perchloric acid mixture in a twin jet electropolishing device. The samples displayed typical grains containing linear faulted regions on the wheelside of the two alloy ribbons. However, an anomalous diffraction behavior was observed upon continuous tilting of the sample: the network of diffraction spots from a single grain appeared to expand or contract and rotate. This anomalous diffraction behavior was explained by assuming extended spike formation at reciprocal lattice points, resulting in a network of continuous rel rods. The validity of the model was confirmed by observations of a cross section of the reciprocal lattice parallel to the rel rods.

Jayaraman, N.↗

Challenges in the 1990's for astronaut training simulators

New challenges for the simulation community at the Johnson Space Center both in near and long terms are considered. In the near term, the challenges of supporting an increasing flight rate, maintaining operations while replacing obsolete subsystems, and incorporating forthcoming changes to the Space Shuttle are discussed, and focus is placed on a change of forward flight-deck instruments from electro-mechanical devices to electronic displays. Training astronauts for complex concurrent missions involving multiple spacecraft and geographically dispersed ground facilities is considered to be foremost of the long-term challenges, in addition to the tasks of improving the simulator reliability and the operational efficiency of the facilities.

Brown, Patrick M.↗