Search NASA⌕ Search

SEARCH · Search NASA

Results for “Design optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Methodology for Sensitivity Analysis, Approximate Analysis, and Design Optimization in CFD for Multidisciplinary Applications

An incremental iterative formulation together with the well-known spatially split approximate-factorization algorithm, is presented for solving the large, sparse systems of linear equations that are associated with aerodynamic sensitivity analysis. This formulation is also known as the 'delta' or 'correction' form. For the smaller two dimensional problems, a direct method can be applied to solve these linear equations in either the standard or the incremental form, in which case the two are equivalent. However, iterative methods are needed for larger two-dimensional and three dimensional applications because direct methods require more computer memory than is currently available. Iterative methods for solving these equations in the standard form are generally unsatisfactory due to an ill-conditioned coefficient matrix; this problem is overcome when these equations are cast in the incremental form. The methodology is successfully implemented and tested using an upwind cell-centered finite-volume formulation applied in two dimensions to the thin-layer Navier-Stokes equations for external flow over an airfoil. In three dimensions this methodology is demonstrated with a marching-solution algorithm for the Euler equations to calculate supersonic flow over the High-Speed Civil Transport configuration (HSCT 24E). The sensitivity derivatives obtained with the incremental iterative method from a marching Euler code are used in a design-improvement study of the HSCT configuration that involves thickness. camber, and planform design variables.

Taylor, Arthur C., III↗
NASA NTRS1991

Optimal input design for aircraft instrumentation systematic error estimation

A new technique for designing optimal flight test inputs for accurate estimation of instrumentation systematic errors was developed and demonstrated. A simulation model of the F-18 High Angle of Attack Research Vehicle (HARV) aircraft was used to evaluate the effectiveness of the optimal input compared to input recorded during flight test. Instrumentation systematic error parameter estimates and their standard errors were compared. It was found that the optimal input design improved error parameter estimates and their accuracies for a fixed time input design. Pilot acceptability of the optimal input design was demonstrated using a six degree-of-freedom fixed base piloted simulation of the F-18 HARV. The technique described in this work provides a practical, optimal procedure for designing inputs for data compatibility experiments.

Morelli, Eugene A.↗
NASA NTRS1971

Computer program optimizes design of nuclear radiation shields

Computer program, OPEX 2, determines minimum weight, volume, or cost for shields. Program incorporates improved coding, simplified data input, spherical geometry, and an expanded output. Method is capable of altering dose-thickness relationship when a shield layer has been removed.

Lahti, G. P.↗
NASA NTRS1972

Time-domain technique for optimal design of digital-filter equalizers.

A technique is presented for the design of frequency-sampling and transversal digital filters from specified unit-impulse responses. The multiplier coefficients for the digital filter are specified by the use of a linear-programming algorithm. Examples include the design of digital filters to generate intersymbol-free pulses for data transmission over ideal bandlimited channels and to equalize data transmission channels that have known unit-impulse responses.

Burlage, D. W.↗
NASA NTRS1972

Optimal design of a class of nonlinear networks.

The problem of synthesizing nth order nonlinear nonautonomous networks with a prescribed small signal behavior is considered. It is shown that, in the absence of coupling elements, the solution of this problem reduces to synthesizing a set of first order nonlinear characteristics. These characteristics can then be determined using a recently developed generalized steepest descent criterion.

Peikari, B.↗
NASA NTRS1972

Constrained optimal design of columns against buckling.

The buckling loads of straight, simply supported columns, loaded by axial thrust are maximized, subject to the restriction that the available volume of structural material is specified. In addition, a constraint is placed upon the maximum allowable prebuckling stress. Analytic solutions are presented for a variety of different cross-sectional geometries.

Frauenthal, J. C.↗
NASA NTRS1974

ODIN - Optimal Design Integration system for synthesis of aerospace vehicles

The ODIN system is a new design synthesis procedure for solving multiple discipline design problems. In ODIN an unlimited number of independent technology codes can be linked together in the computer in any desired sequence. This paper describes the ODIN system, the executive program DIALOG, the data management technique, and the program library. The use of ODIN is illustrated with an application drawn from space system studies.

Rau, T. R.↗
NASA NTRS1975

The ATS-6 power system - An optimized design for maximum power source utilization

The modified power system design adopted for the ATS-6 satellite is described. This design featured a shunt-boost configuration to provide direct power from the solar array to the loads for maximum efficiency. In addition, shunt power dissipators were used, not only as a means of power system regulation, but also for thermal control. A brief description of the spacecraft and of the initial series regulator power system design (which was unable to meet mission requirements) precede the discussion. The shunt boost system provides excellent utilization of array power with an 8 to 10% increase in efficiency over the original configuration; good array-battery static and dynamic load sharing; excellent flexibility in accommodating mission requirements; and low electromagnetic interference.

Lavigna, T. A.↗
NASA NTRS1977

PCSYS: The optimal design integration system picture drawing system with hidden line algorithm capability for aerospace vehicle configurations

A vehicle geometric definition based upon quadrilateral surface elements to produce realistic pictures of an aerospace vehicle. The PCSYS programs can be used to visually check geometric data input, monitor geometric perturbations, and to visualize the complex spatial inter-relationships between the internal and external vehicle components. PCSYS has two major component programs. The between program, IMAGE, draws a complex aerospace vehicle pictorial representation based on either an approximate but rapid hidden line algorithm or without any hidden line algorithm. The second program, HIDDEN, draws a vehicle representation using an accurate but time consuming hidden line algorithm.

Hague, D. S.↗
NASA NTRS1979

The role of thermophysics in the design, optimization and understanding of semiconductor crystal growth in space

The compound semiconductor material PbSnTe has been investigated by NASA Langley Research Center as part of the Material Processing in Space (MPS) experiment in the framework of the Space Shuttle program. The long-range goal of the research is the improving of the performance of infrared detectors for use in remote sensing experiments. Three distinct techniques will be used in the low-g environment of space: two techniques involving bulk growth from melt and a vapor growth technique. In order to establish realistic estimates of the required time for experiments and to determine the thermal gradients that will be required to avoid constitutional supercooling, the diffusion coefficients must be accurately measured, however more data especially in the vapor-solid phase relations are needed.

Crouch, R. K.↗
NASA NTRS1980

Vehicle systems design optimization study

The optimum vehicle configuration and component locations are determined for an electric drive vehicle based on using the basic structure of a current production subcompact vehicle. The optimization of an electric vehicle layout requires a weight distribution in the range of 53/47 to 62/38 in order to assure dynamic handling characteristics comparable to current internal combustion engine vehicles. Necessary modification of the base vehicle can be accomplished without major modification of the structure or running gear. As long as batteries are as heavy and require as much space as they currently do, they must be divided into two packages, one at front under the hood and a second at the rear under the cargo area, in order to achieve the desired weight distribution. The weight distribution criteria requires the placement of batteries at the front of the vehicle even when the central tunnel is used for the location of some batteries. The optimum layout has a front motor and front wheel drive. This configuration provides the optimum vehicle dynamic handling characteristics and the maximum passenger and cargo space for a given size vehicle.

Gilmour, J. L.↗