Search NASA⌕ Search

SEARCH · Search NASA

Results for “Desorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Condition-dependent NO x adsorption/desorption over Pd/BEA: A combined microreactor and in situ DRIFTS study

Pd/BEA is chosen as a model passive NO x adsorber (PNA) to elucidate the effect of the feed gas composition on the NO x adsorption/desorption behavior. The Brønsted acid and the partially hydrolyzed framework Al (P-HAl(OH)) sites in HBEA adsorb NO and NO 2 under dry conditions. Moreover, the performance of HBEA is not affected by CO, while CO inhibits nitrate formation and promotes NO adsorption via the Pd(NO)(CO) complexes formation over Pd/BEA. H 2 O inhibits NO adsorption over the Brønsted acid and P-HAl(OH) sites, and ionic Pd is the only active site for NO x adsorption under wet conditions. Furthermore, NO adsorption over hydrated Pd (Pd 2+ (OH)(NO)(H 2 O) 3 ) is weaker than NO adsorption over bare ionic Pd (Z 2 [Pd 2+ (NO)], Z[Pd 2+ (OH)(NO)]). Dehydration of Pd 2+ (OH)(NO)(H 2 O) 3 forms more stable Z[Pd 2+ (OH)(NO)] during desorption. Here, the NO adsorption capacity of Pd/BEA improves in the presence of CO under both dry and wet conditions by forming a stable carbonyl–nitrosyl complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Catalytic Oxidation of CO on a Curved Pt(111) Surface: Simultaneous Ignition at All Facets through a Transient CO-O Complex

The light-off of the CO oxidation is simultaneous on all Pt crystal surfaces vicinal to the (111) plane, regardless of the reaction conditions, and in contrast with the structural dependence of Pd. In this work, using ambient-pressure XPS we find that, immediately prior to ignition, atomic oxygen incorporates to the subsurface plane, leading to buckling of the topmost CO-Pt layer, and effectively equaling the CO desorption temperature at terraces and steps.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A Strategy for Constructing Pore‐Space‐Partitioned MOFs with High Uptake Capacity for C 2 Hydrocarbons and CO 2

Abstract Introduction of pore partition agents into hexagonal channels of MIL‐88 type (acs topology) endows materials with high tunability in gas sorption. Here, we report a strategy to partition acs framework into pacs (partitioned acs) crystalline porous materials (CPM). This strategy is based on insertion of in situ synthesized 4,4′‐dipyridylsulfide (dps) ligands. One third of open metal sites in the acs net are retained in pacs MOFs; two thirds are used for pore‐space partition. The Co 2 V‐pacs MOFs exhibit near or at record high uptake capacities for C 2 H 2 , C 2 H 4 , C 2 H 6 , and CO 2 among MOFs. The storage capacity of C 2 H 2 is 234 cm 3 g −1 (298 K) and 330 cm 3 g −1 (273 K) at 1 atm for CPM‐733‐dps (the Co 2 V‐BDC form, BDC=1,4‐benzenedicarboxylate). These high uptake capacities are accomplished with low heat of adsorption, a feature desirable for low‐energy‐cost adsorbent regeneration. CPM‐733‐dps is stable and shows no loss of C 2 H 2 adsorption capacity following multiple adsorption–desorption cycles.

Wang, Yong↗
DOE OSTI2021

Defying Thermodynamics: Stabilization of Alane Within Covalent Triazine Frameworks for Reversible Hydrogen Storage

The highly unfavorable thermodynamics of direct aluminum hydrogenation can be overcome by stabilizing alane within a nanoporous bipyridine-functionalized covalent triazine framework (AlH 3 @CTF-bipyridine). This material and the counterpart AlH 3 @CTF-biphenyl rapidly desorb H 2 between 95 and 154°C, with desorption complete at 250°C. Sieverts measurements, 27 Al MAS NMR and 27 Al{ 1 H} REDOR experiments, and computational spectroscopy reveal that AlH 3 @CTF-bipyridine dehydrogenation is reversible at 60°C under 700 bar hydrogen, >10 times lower pressure than that required to hydrogenate bulk aluminum. DFT calculations and EPR measurements support an unconventional mechanism whereby strong AlH 3 binding to bipyridine results in single-electron transfer to form AlH 2 (AlH 3 ) n clusters. Here the resulting size-dependent charge redistribution alters the dehydrogenation/rehydrogenation thermochemistry, suggesting a novel strategy to enable reversibility in high-capacity metal hydrides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Atomically Dispersed Dual‐Metal Site Catalysts for Enhanced CO 2 Reduction: Mechanistic Insight into Active Site Structures

Abstract Carbon‐supported nitrogen‐coordinated single‐metal site catalysts (i.e., M−N−C, M: Fe, Co, or Ni) are active for the electrochemical CO 2 reduction reaction (CO 2 RR) to CO. Further improving their intrinsic activity and selectivity by tuning their N−M bond structures and coordination is limited. Herein, we expand the coordination environments of M−N−C catalysts by designing dual‐metal active sites. The Ni‐Fe catalyst exhibited the most efficient CO2RR activity and promising stability compared to other combinations. Advanced structural characterization and theoretical prediction suggest that the most active N‐coordinated dual‐metal site configurations are 2N‐bridged (Fe‐Ni)N 6 , in which FeN 4 and NiN 4 moieties are shared with two N atoms. Two metals (i.e., Fe and Ni) in the dual‐metal site likely generate a synergy to enable more optimal *COOH adsorption and *CO desorption than single‐metal sites (FeN 4 or NiN 4 ) with improved intrinsic catalytic activity and selectivity.

Li, Yi↗
DOE OSTI2022

Controlling Selectivity in Plasmonic Catalysis: Switching Reaction Pathway from Hydrogenation to Homocoupling Under Visible‐Light Irradiation

Abstract Plasmonic catalysis enables the use of light to accelerate molecular transformations. Its application to the control reaction selectivity is highly attractive but remains challenging. Here, we have found that the plasmonic properties in AgPd nanoparticles allowed different reaction pathways for tunable product formation under visible‐light irradiation. By employing the hydrogenation of phenylacetylene as a model transformation, we demonstrate that visible‐light irradiation can be employed to steer the reaction pathway from hydrogenation to homocoupling. Our data showed that the decrease in the concentration of H species at the surface due to plasmon‐enhanced H 2 desorption led to the control in selectivity. These results provide important insights into the understanding of reaction selectivity with light, paving the way for the application of plasmonic catalysis to the synthesis of 1,3‐diynes, and bringing the vision of light‐driven transformations with target selectivity one step closer to reality.

Peiris, Erandi↗
DOE OSTI2023

Relaxing Wrinkles in Jammed Interfacial Assemblies

Abstract Dynamic covalent bonding has emerged as a mean by which stresses in a network can be relaxed. Here, the strength of the bonding of ligands to nanoparticles at the interface between two immiscible liquids affect the same results in jammed assemblies of nanoparticle surfactants. Beyond a critical degree of overcrowding induced by the compression of jammed interfacial assemblies, the bonding of ligands to nanoparticles (NPs) can be broken, resulting in a desorption of the NPs from the interface. This reduces the areal density of nanoparticle surfactants at the interface, allowing the assemblies to relax, not to a fluid state but rather another jammed state. The relaxation of the wrinkles caused by the compression reflects the tendency of these assemblies to eliminate areas of high curvature, favoring a more planar geometry. This enabled the generation of giant vesicular and multivesicular structures from these assemblies.

Xie, Ganhua↗
DOE OSTI2020

A Strategy for Constructing Pore-Space-Partitioned MOFs with High Uptake Capacity for C 2 Hydrocarbons and CO 2

Introduction of pore partition agents into hexagonal channels of MIL-88 type (acs topology) endows materials with high tunability in gas sorption. Here, we report a strategy to partition acs framework into pacs (partitioned acs) crystalline porous materials (CPM). This strategy is based on insertion of in situ synthesized 4, 4'-dipyridylsulfide (dps) ligands. As a result, one third of open metal sites in the parent acs net are retained in pacs MOFs, while two thirds are used for pore space partition. The newly synthesized Co 2 V-pacs MOFs, with optimized pore space and open metal sites, exhibit near or at record high uptake capacities for C 2 H 2 , C 2 H 4 , C 2 H 6 , and CO 2 among MOFs. For example, the storage capacity of C 2 H 2 is 234 cm 3 /g -1 (298 K) and 330 cm 3 /g -1 (273K) at 1 atm for CPM-733-dps (the Co 2 V-BDC form, BDC=1,4-benzenedicarboxylate), higher than benchmark MOFs such as MOF-74 and all other pacs members. These high uptake capacities are accomplished with low heat of adsorption, a feature desirable for low-energy-cost adsorbent regeneration. CPM-733-dps is stable and shows no loss of C 2 H 2 adsorption capacity following multiple adsorption–desorption cycles.

25 ENERGY STORAGE↗
DOE OSTI2021

Defying Thermodynamics: Stabilization of Alane Within Covalent Triazine Frameworks for Reversible Hydrogen Storage

Metastable metal hydrides such as AlH 3 have many attractive features as hydrogen storage media, but generally require complex reaction schemes for regeneration following H 2 release. Here in this paper, we demonstrate that the highly unfavorable thermodynamics of direct aluminum hydrogenation can be overcome by stabilizing alane within a nanoporous bipyridine-functionalized Covalent Triazine Framework (AlH 3 @CTF-bipyridine). This material and the counterpart AlH 3 @CTF-biphenyl rapidly desorb H 2 between 95 and 154 °C, with desorption complete at 250 °C. Sieverts measurements, 27 Al MAS NMR and 27 Al{ 1 H} REDOR experiments, and computational spectroscopy reveal that AlH 3 @CTF-bipyridine dehydrogenation is reversible at 60 °C under 700 bar hydrogen, >10 times lower pressure than that required to hydrogenate bulk aluminum. DFT calculations and EPR measurements support an unconventional mechanism whereby strong AlH 3 binding to bipyridine results in single-electron transfer to form AlH 2 (AlH 3 ) n clusters. The resulting size-dependent charge redistribution alters the dehydrogenation/rehydrogenation thermochemistry, suggesting a novel strategy to enable reversibility in high-capacity metal hydrides.

Coordination Chemistry↗
DOE OSTI2022

Controlling Selectivity in Plasmonic Catalysis: Switching Reaction Pathway from Hydrogenation to Homocoupling Under Visible–Light Irradiation

Plasmonic catalysis enables the use of light to accelerate molecular transformations. Its application to the control reaction selectivity is highly attractive but remains challenging. Here, we have found that the plasmonic properties in AgPd nanoparticles allowed different reaction pathways for tunable product formation under visible-light irradiation. By employing the hydrogenation of phenylacetylene as a model transformation, we demonstrate that visible-light irradiation can be employed to steer the reaction pathway from hydrogenation to homocoupling. Our data showed that the decrease in the concentration of H species at the surface due to plasmon-enhanced H2 desorption led to the control in selectivity. Furthermore, these results provide important insights into the understanding of reaction selectivity with light, paving the way for the application of plasmonic catalysis to the synthesis of 1,3-diynes, and bringing the vision of light-driven transformations with target selectivity one step closer to reality.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Relaxing Wrinkles in Jammed Interfacial Assemblies

Dynamic covalent bonding has emerged as a mean by which stresses in a network can be relaxed. Here, the strength of the bonding of ligands to nanoparticles at the interface between two immiscible liquids affect the same results in jammed assemblies of nanoparticle surfactants. Beyond a critical degree of overcrowding induced by the compression of jammed interfacial assemblies, the bonding of ligands to nanoparticles (NPs) can be broken, resulting in a desorption of the NPs from the interface. This reduces the areal density of nanoparticle surfactants at the interface, allowing the assemblies to relax, not to a fluid state but rather another jammed state. The relaxation of the wrinkles caused by the compression reflects the tendency of these assemblies to eliminate areas of high curvature, favoring a more planar geometry. Importantly, this enabled the generation of giant vesicular and multivesicular structures from these assemblies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Anomalous Role of Carbon in Pd‐Catalyzed Selective Hydrogenation

Carbonaceous species, including subsurface carbidic carbon and surface carbon, play crucial roles in heterogeneous catalysis. Many reports suggested the importance of subsurface carbon in the selective hydrogenation of alkynes over Pd‐based catalysts. However, the role of surface carbon has been largely overlooked. Here, we demonstrate that subsurface carbon in Pd is not responsible for the selectivity in acetylene hydrogenation. In contrast, the structure of surface carbonaceous species plays a decisive role in hydrogenation selectivity. Electron microscopy and spectroscopy evidence, along with theoretical modelling, reveal that partial graphitization of surface carbonaceous species results in unique spatial confinement of surface reaction intermediates, thus altering the reaction energy landscape in favour of ethylene desorption as opposed to over‐hydrogenation. This mechanism for selectivity control is analogous to enzyme catalysis, where the active centers selectively attract reactants and release products. Similar mechanism may be present in CO/CO 2 hydrogenation and alkane dehydrogenation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Effect of Ambient Organic Acids on the Water Structure at ${\rm TiO}_{2}$ Interfaces

A molecular-level understanding of the effects of ambient organic compounds on the wettability of titanium dioxide ( ${\rm TiO}_{2}$ ) surfaces is relevant to many of its energy-related and environmental applications. Herein, we focus on two common atmospheric carboxylic acids, formic and acetic acid, and characterize their adsorption/ desorption at the aqueous interfaces of anatase and rutile ${\rm TiO}_{2}$ using molecular dynamics with an ab initio deep neural network potential. Our simulations show that these acids prefer to be localized in the interfacial water layers close to the ${\rm TiO}_{2}$ surface where they are stabilized by the interaction/exchange of their acid proton with a surface oxygen, rather than chemisorb at the surface Ti sites by displacing the adsorbed water. Notably, these acids make the surface of anatase hydrophobic, whereas the larger fraction of adsorbed water dissociation can offset their effect on rutile. Furthermore, these results provide a picture where carboxylic acids control the wettability of ${\rm TiO}_{2}$ largely through acid-base chemistry at the interface rather than chemisorption on the oxide surface, a finding that can help improve the design of self-cleaning surfaces and photocatalytic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Are Phosphatidic Acids Ubiquitous in Mammalian Tissues or Overemphasized in Mass Spectrometry Imaging Applications?

Abstract Mass spectrometry imaging (MSI) is an invaluable tool for the spatial visualization of molecules in vivo. However, the question of whether observed annotations are endogenous or artificial (i. e., from in‐source fragmentation) is critical and has been largely unexplored in multimodal MSI. In matrix‐assisted laser desorption/ionization (MALDI)‐MSI datasets from researchers worldwide, PAs were found to represent up to 18 % of annotations in rat brain. Rat brain was additionally imaged here using nanospray desorption electrospray ionization (nano‐DESI), a softer ionization strategy. No PAs observed with MALDI were present in the nano‐DESI dataset. Further investigation strongly indicated lipid fragmentation to PAs for MALDI‐MSI, but not with nano‐DESI‐MSI. We finally extend this observation to the MALDI‐MSI analyses of human tissues, showing that PA annotations comprised up to 16 % of annotations. Therefore, this study shows that MSI annotations should be carefully interrogated, as in‐source fragmentation or modification of lipids may contribute substantially to false annotations and incorrect biological interpretations.

Vandergrift, Gregory W.↗
DOE OSTI2023

Engineering and characterization of carbohydrate‐binding modules for imaging cellulose fibrils biosynthesis in plant protoplasts

Abstract Carbohydrate binding modules (CBMs) are noncatalytic domains that assist tethered catalytic domains in substrate targeting. CBMs have therefore been used to visualize distinct polysaccharides present in the cell wall of plant cells and tissues. However, most previous studies provide a qualitative analysis of CBM‐polysaccharide interactions, with limited characterization of engineered tandem CBM designs for recognizing polysaccharides like cellulose and limited application of CBM‐based probes to visualize cellulose fibrils synthesis in model plant protoplasts with regenerating cell walls. Here, we examine the dynamic interactions of engineered type‐A CBMs from families 3a and 64 with crystalline cellulose‐I and phosphoric acid swollen cellulose. We generated tandem CBM designs to determine various characteristic properties including binding reversibility toward cellulose‐I using equilibrium binding assays. To compute the adsorption ( nk on ) and desorption ( k off ) rate constants of single versus tandem CBM designs toward nanocrystalline cellulose, we employed dynamic kinetic binding assays using quartz crystal microbalance with dissipation. Our results indicate that tandem CBM3a exhibited the highest adsorption rate to cellulose and displayed reversible binding to both crystalline/amorphous cellulose, unlike other CBM designs, making tandem CBM3a better suited for live plant cell wall biosynthesis imaging applications. We used several engineered CBMs to visualize Arabidopsis thaliana protoplasts with regenerated cell walls using confocal laser scanning microscopy and wide‐field fluorescence microscopy. Lastly, we also demonstrated how CBMs as probe reagents can enable in situ visualization of cellulose fibrils during cell wall regeneration in Arabidopsis protoplasts.

09 BIOMASS FUELS↗
DOE OSTI2020

CO as a Probe Molecule to Study Surface Adsorbates during Electrochemical Oxidation of Propene

A major challenge in the electrochemical oxidation of hydrocarbons is understanding the formation of intermediate species, some of which continue to react, while others are non-reactive or poisonous species that block adsorption of further reactants. Herein we investigate the identity and behavior of adsorbates formed during partial oxidation of propene. We employ two techniques: Electrochemistry-Mass Spectrometry (EC-MS) and Attenuated Total Reflection Infrared Spectroscopy (ATR-FTIR). In both cases, we use CO as a probe molecule, to perturb the ad-layer of propene intermediates. In the EC-MS experiments, propene and its intermediates were quantified by triggering their desorption via displacement with CO. We show evidence for at least two distinct classes of propene adsorbates, via CO displacement and electrochemical stripping. A redshift in the ν(C–O) mode was observed, during IR spectroscopy, reflecting the chemical environment arising from strongly bound propene intermediates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Assessing the Performance of Exchange‐Correlation Density Functionals in Describing the Iron‐Catalyzed Ammonia Synthesis System

Density functional theory (DFT) has been widely employed for elucidating mechanistic aspects of heterogeneous catalysis. However, the accuracy of DFT calculations relies heavily on selecting an exchange-correlation (XC) functional that correctly describes the electronic structure of materials involved in the reactions. This study assesses the accuracy of several XC density functionals for modeling the iron-catalyzed ammonia synthesis system. In the assessment of functional accuracy, experimental references are compared to DFT-calculated values for the formation energy of gas-phase ammonia and nitrogen, bulk Fe/Fe-nitride (γ′-Fe 4 N) lattice constants and cohesive/formation energies, and nitrogen and ammonia binding energies on Fe(100), Fe(111), Fe(110), and γ′-Fe 4 N(111). It is observed that the experimental value for each of these descriptors is accurately modeled by at least one functional. RPBE alone provides reliable estimates for both the lattice constant and cohesive energy of Fe and γ′-Fe 4 N. Temperature-programmed desorption experiments led to estimates for N and NH 3 adsorption across several Fe-based facets that are best captured by RPBE. These results highlight the importance of choosing an appropriate XC functional that accurately describes experimental systems and offer insights into effectively modeling the interactions between nitrogen and ammonia on Fe-based surfaces.

adsorption↗