Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Studying single nanocrystals under high pressure using an x-ray nanoprobe

In this report, we demonstrate the feasibility of applying a 250-nm focused x-ray beam to study a single crystalline NbSe{sub 3} nanobelt under high-pressure conditions in a diamond anvil cell. With such a small probe, we not only resolved the distribution and morphology of each individual nanobelt in the x-ray fluorescence maps but also obtained the diffraction patterns from individual crystalline nanobelts with thicknesses of less than 50 nm. Single crystalline diffraction measurements on NbSe{sub 3} nanobelts were performed at pressures up to 20 GPa.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Adaptive 3D convolutional neural network-based reconstruction method for 3D coherent diffraction imaging

We present a novel adaptive machine-learning based approach for reconstructing three-dimensional (3D) crystals from coherent diffraction imaging. We represent the crystals using spherical harmonics (SH) and generate the corresponding synthetic diffraction patterns. We utilize 3D convolutional neural networks (CNNs) to learn a mapping between 3D diffraction volumes and the SH, which describe the boundary of the physical volumes from which they were generated. We use the 3D CNN-predicted SH coefficients as the initial guesses, which are then fine-tuned using adaptive model-independent feedback for improved accuracy. We also adaptively tune the locations, intensities, and decay rates of collections of radial basis functions in order to reproduce the non-uniform internal structure of 3D objects and demonstrate the method for a synthetic volume that has an internal void and a density ramp.

36 MATERIALS SCIENCE↗

Characterization of a Test for Invasive Breast Cancer Using X-ray Diffraction of Hair—Results of a Clinical Trial

Objective: To assess the performance of a test for breast cancer utilizing synchrotron x-ray diffraction analysis of scalp hair from women undergoing diagnostic radiology assessment. Design and Setting: A double-blinded clinical trial of women who attended diagnostic radiology clinics in Australia. Patients: 1796 women referred for diagnostic radiology, with no previous history of cancer. Main Outcome Measures: Sensitivity, specificity and accuracy of the hair test analysis compared to the gold standard of imaging followed by biopsy where indicated. Results: The hair-based assay had an overall accuracy of > 77% and a negative predictive value of 99%. For all women, the sensitivity of both mammography and X-ray diffraction alone was 64%, but when used together the sensitivity rose to 86%. The sensitivity of the hair test for women under the age of 70 was 74%. Conclusion: In this large population trial the association between the presence of breast cancer and an altered hair fiber X-ray diffraction pattern previously reported has been confirmed. It appears that mammography and X-ray diffraction of hair detect different populations of breast cancers, and are synergistic when used together.

60 APPLIED LIFE SCIENCES↗

Identifying point defects and ordering in the high-entropy layered oxide Li 1.5 MO 3-δ (M=Mn, Al, Fe, Co, Ni) for energy storage applications

High-entropy layered oxides (HELOs) represent a very promising class of next-generation battery cathodes, combining the well-studied properties of layered cathode materials such as LiCoO 2 with the chemical tunability and stability of high-entropy materials. HELO materials often form particles with complex defects and domain structures, complicating accurate characterization of structure and cation mixing. Understanding disorder and order in HELO materials is necessary for understanding their performance and utility as cathodes. Here we demonstrate the characterization of the HELO Li 1.5 MO 3-δ (M = Mn, Al, Fe, Co, Ni), wherein X-ray powder diffraction, transmission electron microscopy imaging, and electron diffraction patterns are analyzed to reveal the presence of ordering in the HELO, with imaging and diffraction simulation employed to compare experimental results to atomic modeling. Finally, without rigorous characterization at the atomic scale, important features such as defect ordering can be easily overlooked and therefore remain unconsidered when interpreting experimental results.

36 MATERIALS SCIENCE↗

A New Carbon Allotrope with Six-Fold Helical Chains in all-sp2 Bonding Networks

Using a recently developed approach to constructing covalent network structures from linear carbyne, we identify by ab initio calculations a new carbon allotrope in R3m (D5 3d) symmetry that comprises six-fold helical chains with alternating sp2 -type single and double bonds along the chains that are connected via zigzag benzene rings. This 6-fold carbene is characterized as a three-dimensional three-connected chiral crystalline modification of graphite. Phonon and electronic band calculations indicate that this new structure is dynamically stable and is a semiconductor with a band gap of 0.47 eV, in contrast to the semimetallic nature of graphite. Simulated x-ray diffraction patterns of the 6-fold carbene provide an excellent match to the previously unexplained distinct diffraction peak of a new carbon allotrope found in recent detonation experiments. These results establish a new carbon phase and offer insights into its outstanding structural and electronic properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic and structural properties of BiFeO{sub 3} thin films grown epitaxially on SrTiO{sub 3}/Si substrates

The integration of oxides with semiconductors is important for the technological advancement of the next generation electronics. Concomitant ferroelectric and antiferromagnetic (AF) behavior is demonstrated in single crystal BiFeO{sub 3} (BFO) films grown on 20 nm SrTiO{sub 3} (STO) virtual substrates on Si(100) using molecular beam epitaxy (MBE). STO thin films are grown in an oxide MBE chamber by co-deposition of Sr, Ti, and molecular O{sub 2}. Careful control of the O{sub 2} during nucleation produced commensurate growth of STO on Si. The sequence of the steps allows for the suppression of an amorphous SiO{sub 2} layer. This STO(20 nm)/Si structure was used as a virtual substrate for MBE deposition of BFO on Si without breaking vacuum. BFO was deposited using Fe and O{sub 2} plasma with an overpressure of Bi flux, the growth rate was controlled by the incoming Fe flux. The reflection high energy electron diffraction image shows a 2-D growth front with a 6-fold surface reconstruction under optimized O{sub 2} pressure of 5 Multiplication-Sign 10{sup -8} mbar. Cross-sectional transmission electron microscopy (TEM) confirms the high crystallinity of the films and shows sharp, atomically flat interfaces. The selected area diffraction pattern (SADP) reveals that BFO grows in a distorted rhombohedral crystal structure. X-ray diffraction does not show formation of second phases and is consistent with the TEM and SADP results. The BFO films show AF behavior with a Neel temperature that exceeds 350 K, as expected (T{sub N} = 673 K) and with a residual ferromagnetic behavior that decreases with film thickness and is consistent with the G-type AF due to the canted spins. The saturation magnetization per unit volume for a 40 nm thick film was 180 emu/cm{sup 3} at an in-plane magnetic field of 8 kOe. The ferroelectric behavior of the films was verified using piezoresponse force microscopy.

36 MATERIALS SCIENCE↗

Accurate measurement of relative tilt and azimuth angles in electron tomography: A comparison of fiducial marker method with electron diffraction

Electron tomography is a method whereby a three-dimensional reconstruction of a nanoscale object is obtained from a series of projected images measured in a transmission electron microscope. We developed an electron-diffraction method to measure the tilt and azimuth angles, with Kikuchi lines used to align a series of diffraction patterns obtained with each image of the tilt series. Since it is based on electron diffraction, the method is not affected by sample drift and is not sensitive to sample thickness, whereas tilt angle measurement and alignment using fiducial-marker methods are affected by both sample drift and thickness. The accuracy of the diffraction method benefits reconstructions with a large number of voxels, where both high spatial resolution and a large field of view are desired. The diffraction method allows both the tilt and azimuth angle to be measured, while fiducial marker methods typically treat the tilt and azimuth angle as an unknown parameter. The diffraction method can be also used to estimate the accuracy of the fiducial marker method, and the sample-stage accuracy. A nano-dot fiducial marker measurement differs from a diffraction measurement by no more than ±1°.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A Medipix quantum area detector allows rotation electron diffraction data collection from submicrometre three-dimensional protein crystals

An ultrasensitive Medipix2 detector allowed the collection of rotation electron-diffraction data from single three-dimensional protein nanocrystals for the first time. The data could be analysed using the standard X-ray crystallography programs MOSFLM and SCALA. When protein crystals are submicrometre-sized, X-ray radiation damage precludes conventional diffraction data collection. For crystals that are of the order of 100 nm in size, at best only single-shot diffraction patterns can be collected and rotation data collection has not been possible, irrespective of the diffraction technique used. Here, it is shown that at a very low electron dose (at most 0.1 e{sup −} Å{sup −2}), a Medipix2 quantum area detector is sufficiently sensitive to allow the collection of a 30-frame rotation series of 200 keV electron-diffraction data from a single ∼100 nm thick protein crystal. A highly parallel 200 keV electron beam (λ = 0.025 Å) allowed observation of the curvature of the Ewald sphere at low resolution, indicating a combined mosaic spread/beam divergence of at most 0.4°. This result shows that volumes of crystal with low mosaicity can be pinpointed in electron diffraction. It is also shown that strategies and data-analysis software (MOSFLM and SCALA) from X-ray protein crystallography can be used in principle for analysing electron-diffraction data from three-dimensional nanocrystals of proteins.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of calcium-containing orthophosphates of NaZr{sub 2}(PO{sub 4}){sub 3} structural type by high-temperature X-ray diffraction

Orthophosphates Ca{sub 0.5}Ti{sub 2}(PO{sub 4}){sub 3}, Ca{sub 0.5}Zr{sub 2}(PO{sub 4}){sub 3}, Ca{sub 0.75}Zr{sub 2}(SiO{sub 4}){sub 0.5}(PO{sub 4}){sub 2.5}, and CaMg{sub 0.5}Zr{sub 1.5}(PO{sub 4}){sub 3} (structural type NaZr{sub 2}(PO{sub 4}){sub 3}), having different occupancies of interframework positions by calcium, have been prepared by the sol-gel method with the subsequent thermal treatment of dried gels and investigated by IR spectroscopy and X-ray diffraction. The analytical indexing of X-ray diffraction patterns is performed within the sp. gr. R3{sup -}. High-temperature X-ray diffraction was used to investigate the behavior of the orthophosphates upon heating: thermal expansion in the temperature range of 20-610 Degree-Sign C (up to 500 Degree-Sign C for Ca{sub 0.5}Zr{sub 2}(PO{sub 4}){sub 3}). The coefficients of thermal expansion are calculated from the shift of diffraction peaks. The unit-cell parameters of crystals at different temperatures are determined. The dependences of thermal expansion and its anisotropy on the occupancy of cation M positions by calcium are revealed.

36 MATERIALS SCIENCE↗

Modeling quasi-lattice with octagonal symmetry

We prove the possibility to use the method of modeling of a quasi-lattice with octagonal symmetry similar to that proposed earlier for the decagonal quasicrystal. The method is based on the multiplication of the groups of basis sites according to specified rules. This model is shown to be equivalent to the method of the periodic lattice projection, but is simpler because it considers merely two-dimensional site groups. The application of the proposed modeling procedure to the reciprocal lattice of octagonal quasicrystals shows a fairly good matching with the electron diffraction pattern. Similarly to the decagonal quasicrystals, the possibility of three-index labeling of the diffraction reflections is exhibited in this case. Moreover, the ascertained ratio of indices provides information on the intensity of diffraction reflections.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Observation of coherent optical phonons excited by femtosecond laser radiation in Sb films by ultrafast electron diffraction method

The generation of coherent optical phonons in a polycrystalline antimony film sample has been investigated using femtosecond electron diffraction method. Phonon vibrations have been induced in the Sb sample by the main harmonic of a femtosecond Ti:Sa laser (λ = 800 nm) and probed by a pulsed ultrashort photoelectron beam synchronized with the pump laser. The diffraction patterns recorded at different times relative to the pump laser pulse display oscillations of electron diffraction intensity corresponding to the frequencies of vibrations of optical phonons: totally symmetric (A{sub 1g}) and twofold degenerate (E{sub g}) phonon modes. The frequencies that correspond to combinations of these phonon modes in the Sb sample have also been experimentally observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Patterned probes for high precision 4D-STEM bragg measurements

Nanoscale strain mapping by four-dimensional scanning transmission electron microscopy (4D-STEM) relies on determining the precise locations of Bragg-scattered electrons in a sequence of diffraction patterns, a task which is complicated by dynamical scattering, inelastic scattering, and shot noise. These features hinder accurate automated computational detection and position measurement of the diffracted disks, limiting the precision of measurements of local deformation. Here, we investigate the use of patterned probes to improve the precision of strain mapping. We imprint a "bullseye" pattern onto the probe, by using a binary mask in the probe-forming aperture, to improve the robustness of the peak finding algorithm to intensity modulations inside the diffracted disks. We show that this imprinting leads to substantially improved strain-mapping precision at the expense of a slight decrease in spatial resolution. In experiments on an unstrained silicon reference sample, we observe an improvement in strain measurement precision from 2.7% of the reciprocal lattice vectors with standard probes to 0.3% using bullseye probes for a thin sample, and an improvement from 4.7% to 0.8% for a thick sample. Additionally, we use multislice simulations to explore how sample thickness and electron dose limit the attainable accuracy and precision for 4D-STEM strain measurements.

47 OTHER INSTRUMENTATION↗

Ge{sub x}NbSe{sub 2} and Ge{sub x}NbS{sub 2} intercalation compounds

The structures of two intercalation compounds, Ge{sub {approx}0.2}NbSe{sub 2} and Ge{sub {approx}0.3}NbS{sub 2} were investigated by single crystal X-ray diffraction and electron microscopy (selected area electron diffraction (SAED), high resolution electron microscopy (HRTEM) and X-ray microanalysis by energy dispersive spectroscopy (XEDS)). Crystal structure determinations of the average structure of the intercalation compounds 2H-Ge{sub 0.217}NbSe{sub 2} and 4H-Ge{sub 0.288}NbS{sub 2} are reported: the selenide compound crystallizes in the space group P6{sub 3}/mmc with a = 3.4560(9) A and c = 12.966(3) A and adopts the 2H-NbSe{sub 2} structure-type, while the sulfide compound crystallizes in the P6{sub 3}mc space group, with a = 3.3392(9) A and c = 25.404(7) A with a structure-type 4H{sub c}-NbS{sub 2} which it is known for TaSe{sub 2}. In both structures the germanium atoms are located in the empty octahedral positions of the van der Waals gap between the NbX{sub 2} (X = S, Se) layers. Electron diffraction patterns from several Ge{sub x}NbSe{sub 2} crystal flakes show different superstructures and exhibit diffracted diffuse intensity: weak satellites corresponding to a{sub 0}{radical}(3)xa{sub 0}{radical}(3) and 2a{sub 0} x 2a{sub 0} superstructures were observed for x {approx} 0.15 (a{sub 0} is the basal lattice parameter of the host structure). For x {approx} 0.25-0.33, the same type of satellite is observed with a stronger intensity. For x {approx} 0.5 only satellites corresponding to the a{sub 0}{radical}(3)xa{sub 0}{radical}(3) superstructure were present. In the case of Ge{sub x}NbS{sub 2}, with 0.10 < x < 0.25, the germanium atoms are ordered in domains with an a{sub 0}{radical}(3)xa{sub 0}{radical}(3) superstructure. In some crystals disorder along the c-axis has been observed.

36 MATERIALS SCIENCE↗

Diffraction from quasi-one-dimensional crystals

General expressions of diffraction intensity distribution of quasi-one-dimensional crystals are evaluated within kinematical approximation. In order to gain the generality, diffraction intensity has been derived for each of the fifteen conformation classes. Characteristic features of the diffraction patterns are discussed and it is shown how the symmetry can be fully determined from the diffraction intensity distribution. General results are tabulated and their application is illustrated on the (10,10) molybdenum disulfide nanotube.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface x-ray speckles : coherent surface diffraction from Au(0 01).

We present coherent speckled x-ray diffraction patterns obtained from a monolayer of surface atoms. We measured both the specular anti-Bragg reflection and the off-specular hexagonal reconstruction peak for the Au(001) surface reconstruction. We observed fluctuations of the speckle patterns even when the integrated intensity appears static. By autocorrelating the speckle patterns, we were able to identify two qualitatively different surface dynamic behaviors of the hex reconstruction depending on the sample temperature.

36 MATERIALS SCIENCE↗

Atomic structures determined from digitally defined nanocrystalline regions

Nanocrystallography has transformed our ability to interrogate the atomic structures of proteins, peptides, organic molecules and materials. By probing atomic level details in ordered sub-10 nm regions of nanocrystals, scanning nanobeam electron diffraction extends the reach of nanocrystallography and in principle obviates the need for diffraction from large portions of one or more crystals. Scanning nanobeam electron diffraction is now applied to determine atomic structures from digitally defined regions of beam-sensitive peptide nanocrystals. Using a direct electron detector, thousands of sparse diffraction patterns over multiple orientations of a given crystal are recorded. Each pattern is assigned to a specific location on a single nanocrystal with axial, lateral and angular coordinates. This approach yields a collection of patterns that represent a tilt series across an angular wedge of reciprocal space: a scanning nanobeam diffraction tomogram. Using this diffraction tomogram, intensities can be digitally extracted from any desired region of a scan in real or diffraction space, exclusive of all other scanned points. Intensities from multiple regions of a crystal or from multiple crystals can be merged to increase data completeness and mitigate missing wedges. It is demonstrated that merged intensities from digitally defined regions of two crystals of a segment from the OsPYL/RCAR5 protein produce fragment-based ab initio solutions that can be refined to atomic resolution, analogous to structures determined by selected-area electron diffraction. In allowing atomic structures to now be determined from digitally outlined regions of a nanocrystal, scanning nanobeam diffraction tomography breaks new ground in nanocrystallography.

36 MATERIALS SCIENCE↗

Structure resolution by electron diffraction tomography of the complex layered iron-rich Fe-2234-type Sr{sub 5}Fe{sub 6}O{sub 15.4}

The crystal structure of the strontium ferrite Sr{sub 5}Fe{sub 6}O{sub 15.4}, was solved by direct methods on electron diffraction tomography data acquired on a transmission electron microscope. The refined cell parameters are a=27.4047(3) Å, b=5.48590(7) Å and c=42.7442(4) Å in Fm2m symmetry. Its structure is built up from the intergrowth sequence between a quadruple perovskite-type layer with a complex rock-salt (RS)-type block. In the latter iron atoms are found in two different environments : tetragonal pyramid and tetrahedron. The structural model was refined by Rietveld method based on the powder X-ray diffraction pattern. - Highlights: • Complex structure of Sr{sub 5}Fe{sub 6}O{sub 15.4} solved by electron diffraction tomography. • Observed Fourier maps allow determining missing oxygen atoms in the structure. • Structural model refined from powder X-ray diffraction data. • Intergrowth between quadruple perovskite layer with double rock-salt-type layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation of nanocrystalline perovskite KNbO{sub 3} by peroxo-precursor decomposition method

Nanocrystalline perovskite KNbO{sub 3} is prepared by a peroxo-precursor decomposition method at moderate temperatures of 650-900 {sup o}C. Peroxo-heteropoly-niobic acid is prepared by direct reaction between NbC powder and H{sub 2}O{sub 2} aq, and mixing the peroxo-heteropoly-niobic acid with KOH aq yields an amorphous precursor salt. Perovskite KNbO{sub 3} is obtained by heating the precursor in air for 1 h at 650-900 {sup o}C. The X-ray diffraction patterns were well fitted with the space group Pm3m in the Rietveld analysis. The X-ray diffraction peak profiles and field emission scanning electron microscope images indicate the crystallite size is in the range of 25-35 nm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗