Search NASA⌕ Search

SEARCH · Search NASA

Results for “Directed Evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Signatures of low-dimensional magnetism and short-range spin fluctuations in Co-based trirutiles

Features of low dimensional magnetism resulting from a square-net arrangement of Co atoms in trirutile CoTa2O6 is studied in the present work by means of density functional theory and is compared with the experimental results of specific heat and neutron diffraction. The small total energy differences between the ferromagnetic (FM) and antiferromagnetic (AFM) configuration of CoTa2O6 shows that competing magnetic ground states exist, with the possibility of transition from FM to AFM phase at low temperature. Our calculation further suggests the semi-conducting behavior for CoTa2O6 with a band gap of ~0.41 eV. The calculated magnetic anisotropy energy is ~2.5 meV with its easy axis along the [100] (in-plane) direction. Studying the evolution of magnetism in Co1-xMgxTa2O6 (x = 0, 0.1, 0.3, 0.5, 0.7 and 1). it is found that the sharp AFM transition exhibited by CoTa2O6 at TN = 6.2 K in it’s heat capacity vanishes with Mg-dilution, indicating the obvious effect of weakening the superexchange pathways of Co. The current specific heat study reveals the robust nature of TN for CoTa2O6 in applied magnetic fields. Clear indication of short-range magnetism is obtained from the magnetic entropy, however, diffuse components are absent in neutron diffraction data. At TN , CoTa2O6 enters a long-range ordered magnetic state which can be described using a propagation vector, ( 1 1 0). Upon Mg-dilution at x =0.1, the long-range ordered magnetism is destroyed. The present results should motivate an investigation of magnetic excitations in this low-dimensional anisotropic magnet.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Origin of light-induced metastability in ZrTe 5

Here we study the nonequilibrium electronic structure of a model Dirac semimetal ZrTe 5 by using time-and-angle resolved photoemission spectroscopy and density functional theory–based electron and phonon calculations. By measuring the electronic dispersion near the Γ point at time delays up to 10 picoseconds, we discovered that the band spectral weight does not recover during the measured temporal window, revealing the existence of a light-induced metastable state in the electronic structure of this material. Our calculations find that the photoexcited A 1⁢g phonon mode leads to a band renormalization that both supports our experimental observations at the zone center and predicts changes to the band structure outside of our experimental window, ultimately showing the evolution from a direct to an indirect gap semimetal; such band renormalization dramatically reduces the electron-hole recombination rate giving rise to the metastability in this system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transient electronic structure of the photoinduced phase of Pr0.7Ca0.3MnO3 probed with soft x-ray pulses

We use time-resolved x-ray absorption near-edge structure spectroscopy to investigate the electronic dynamics associated with the photoinduced insulator-to-metal phase transition in the colossal magnetoresistive manganite Pr{sub 0.7}Ca{sub 0.3}MnO{sub 3}. Absorption changes at the O K and Mn L edges directly monitor the evolution of the density of unoccupied states in the transient photoinduced phase. We show that the electronic structure of the photoinduced phase is remarkably similar to that of the ferromagnetic metallic phase reached in related manganites upon cooling below the Curie temperature.

36 MATERIALS SCIENCE↗

Improvements to the macroscopic-microscopic approach of nuclear fission

The well-established macroscopic-microscopic (mac-mic) description of nuclear fission enables the prediction of fission-fragment yields for a broad range of fissioning systems. In this work, we present several key enhancements to this approach. We improve upon the microscopic sector of nuclear potential-energy surfaces by magnifying the resolution of the Lipkin-Nogami equations and strengthening the Strutinsky procedure, thus reducing spurious effects from the continuum. We further present a novel deterministic method for calculating fission dynamics under the assumption of strongly damped nucleonic motion. Our technique directly determines the evolution of the scissioned shape distribution according to the number of random-walk steps rather than the statistical accumulation of fission events. We show that our new technique is equivalent to the Metropolis random walk pioneered over the past decade by Randrup and colleagues. It further improves upon it because we remove the need for altering the nuclear landscape via a biased potential. With our final improvement, we calculate fission fragments mass and charge distributions using particle number projection, which affords the simultaneous calculation of both mass- and charge-yield distributions. Fission fragments are thus calculated from the quantum-mechanical A -body states of the potential-energy surface rather than from the collective mass asymmetry variable α g of the finite-range liquid-drop model used in past work. We highlight the success of our enhancements by predicting the odd-even staggering and the charge polarization for the neutron-induced fission of 233 U and 235 U .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

In-Medium Similarity Renormalization Group For Nuclei

We present a new ab initio method that uses similarity renormalization group (SRG) techniques to continuously diagonalize nuclear many-body Hamiltonians. In contrast with applications of the SRG to two- and three-nucleon interactions in free space, we perform the SRG evolution ''in medium'' directly in the A-body system of interest. The in-medium approach has the advantage that one can approximately evolve 3,...,A-body operators using only two-body machinery based on normal-ordering techniques. The method is nonperturbative and can be tailored to problems ranging from the diagonalization of closed-shell nuclei to the construction of effective valence-shell Hamiltonians and operators. We present first results for the energies of {sup 4}He, {sup 16}O, and {sup 40}Ca, which have accuracies comparable to coupled-cluster calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Lustre Unveiled: Evolution, Design, Advancements, and Current Trends

The Lustre filesystem serves as a vital element in high-performance parallel storage, meeting the rising demands of scientific, research, and enterprise environments. Widely deployed across HPC environments, ranging from small-scale applications in AI/ML, to domains like oil and gas, drug discovery, and meteorology, and manufacturing, Lustre addresses the universal challenge of efficiently accessing vast and ever-increasing volumes of data. Lustre is the filesystem of choice on six out of the top 10 fastest supercomputers in the world today, over 65% of the top 100, and also for over 60% of the top 500. Despite its widespread popularity, there is a lack of a complete and up-to-date reference, covering Lustre’s evolution, design, and various advancements made over the years. In this journal, we aim to fill this gap by providing a comprehensive journey of Lustre, including its history with significant contributions to HPC, detailed architecture and design elements, exploration of advancements added through its evolution, and future directions. Additionally, we present a comparison of Lustre with other prominent storage technologies of the era. To illustrate the current state of Lustre, we analyze several filesystem trends, including utilization, performance, and usage patterns on Orion, the Lustre filesystem on the first exascale supercomputer Frontier. We hope that this journal serves as a comprehensive educational reference for the current and future generations interested in HPC filesystem storage aspects.

97 MATHEMATICS AND COMPUTING↗

Cesium Ion Exchange with Crystalline Silicotitanate Literature Review

Crystalline silicotinante (CST) is planned for use as the ion exchange media to accomplish the cesium (Cs) decontamination of low-activity waste (LAW) in the current evolution of the Direct Feed Low-Activity Waste flowsheet. CST has yet to be deployed in a production-scale operating waste treatment facility on the Hanford Site. However, CST was used nearly 20 years ago to successfully treat approximately 270,000 gallons of supernatant waste in modular columns at Oak Ridge National Laboratory. As part of the technical maturation of the media for use at Hanford, an assessment of the state-of-the-art was performed by reviewing work in the technical literature. The review considered work from the U.S. Department of Energy (DOE) complex (i.e., national laboratories and government documents), the CST manufacturer, and the open technical literature nationally and internationally. The review focused on information most relevant to the caustic, high-sodium chemical environment typical of Hanford LAW. The topic areas explored in this literature review document include the following: CST structural and physical properties; Isotherm and batch contact data; Mass transport: intraparticle, interparticle, dispersion in the column; Column performance at multiple scales; Hydraulic performance; The effect of process conditions; Gas generation and retention behavior; Post-processing options for spent CST media The reviewed literature demonstrates that CST is well-suited for Cs decontamination of Hanford LAW. However, after consideration of the available literature data in these subject areas, some uncertainties regarding the application of CST for the treatment of Hanford LAW are identified and summarized. These uncertainties are areas where additional information may permit better prediction of CST performance or provide margin to facility operations and safety basis analyses.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Shifting the Paradigm for Long Term Monitoring at Legacy Sites to Improve Performance while Reducing Cost

A major issue facing many government and private industry sites that were previously contaminated with radioactive and chemical wastes is that often the sites cannot be cleaned up enough to permit unrestricted human access. These sites will require long-term management, in some cases indefinitely, leaving site owners with the challenge of protecting human health and environmental quality in a cost effective manner. Long-term monitoring of groundwater contamination is one of the largest projected costs in the life cycle of environmental management at the Savannah River Site (SRS), the larger DOE complex, and many large federal and private sites. Currently, most monitoring strategies are focused on laboratory measurements of contaminants measured in groundwater samples collected from wells. This approach is expensive, and provides limited and lagging information about the effectiveness of cleanup activities and the behavior of the residual contamination. Over the last twenty years, DOE and other federal agencies have made significant investments in the development of various types of sensors and strategies that would allow for remote analysis of contaminants in groundwater, but these approaches do not promise significant reductions in risk or cost. Scientists at SRS have developed a new paradigm to simultaneously improve the performance of long term monitoring systems while lowering the overall cost of monitoring. This alternative approach incorporates traditional point measurements of contaminant concentration with measurements of controlling variables including boundary conditions, master variables, and traditional plume/contaminant variables. Boundary conditions are the overall driving forces that control plume movement and therefore provide leading indication to changes in plume stability. These variables include metrics associated with meteorology, hydrology, hydrogeology, and land use. Master variables are the key variables that control the chemistry of the groundwater system, and include redox variables (ORP, DO, chemicals), pH, specific conductivity, biological community (breakdown/decay products), and temperature. A robust suite of relatively inexpensive tools is commercially available to measure these variables. Traditional plume/contaminant variables are various measures of contaminant concentration including traditional analysis of chemicals in groundwater samples. An innovative long term monitoring strategy has been developed for acidic or caustic groundwater plumes contaminated with metals and/or radionuclides. Not only should the proposed strategy be more effective at early identification of potential risks, this strategy should be significantly more cost effective because measurement of controlling boundary conditions and master variables is relatively simple. These variables also directly reflect the evolution of the plume through time, so that the monitoring strategy can be modified as the plume 'ages'. This transformational long-term monitoring paradigm will generate significant cost savings to DOE, other federal agencies and industry and will provide improved performance and leading indicators of environmental management performance.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Innovative Strategy For Long Term Monitoring Of Metal And Radionuclide Plumes

Many government and private industry sites that were once contaminated with radioactive and chemical wastes cannot be cleaned up enough to permit unrestricted human access. The sites will require long term management, in some cases indefinitely, leaving site owners with the challenge of protecting human health and environmental quality at these "legacy" sites. Long-term monitoring of groundwater contamination is one of the largest projected costs in the life cycle of environmental management at the Savannah River Site, the larger DOE complex, and many large federal and private sites. There is a need to optimize the performance and manage the cost of long term surveillance and monitoring at their sites. Currently, SRNL is initiating a pilot field test using alternative protocols for long term monitoring of metals and radionuclides. A key component of the approach is that monitoring efforts are focused on measurement of low cost metrics related to hydrologic and chemical conditions that control contaminant migration. The strategy combines careful monitoring of hydrologic boundary conditions with measurement of master variables such as chemical surrogates along with a smaller number of standard well analyses. In plumes contaminated with metals, master variables control the chemistry of the groundwater system, and include redox variables (ORP, DO, chemicals), pH, specific conductivity, biological community (breakdown/decay products), and temperature. Significant changes in these variables will result in conditions whereby the plume may not be stable and therefore can be used to predict possible plume migration. Conversely, concentration measurements for all types of contaminants in groundwater are a lagging indicator plume movement - major changes contaminant concentrations indicate that contamination has migrated. An approach based on measurement of master variables and explicit monitoring of hydrologic boundary conditions combined with traditional metrics should lead to improved monitoring while simultaneously reducing costs. This paradigm is being tested at the SRS F-Area where an innovative passive remedial system is being monitored and evaluated over the long term prior to traditional regulatory closure. Contaminants being addressed at this site are uranium, strontium-90, iodine-129, and tritium. We believe that the proposed strategies will be more effective in early identification of potential risks; these strategies will also be cost effective because controlling variables are relatively simple to measure. These variables also directly reflect the evolution of the plume through time, so that the monitoring strategy can be modified as the plume 'ages'. This transformational long-term monitoring paradigm will generate large cost savings to DOE, other federal agencies and industry and will provide improved performance and leading indicators of environmental management performance.

54 ENVIRONMENTAL SCIENCES↗

Shifting the Paradigm for Long Term Monitoring at Legacy Sites to Improve Performance while Reducing Costs - 13422

A major issue facing many government and private industry sites that were previously contaminated with radioactive and chemical wastes is that often the sites cannot be cleaned up enough to permit unrestricted human access. These sites will require long-term management, in some cases indefinitely, leaving site owners with the challenge of protecting human health and environmental quality in a cost effective manner. Long-term monitoring of groundwater contamination is one of the largest projected costs in the life cycle of environmental management at the Savannah River Site (SRS), the larger DOE complex, and many large federal and private sites. Currently, most monitoring strategies are focused on laboratory measurements of contaminants measured in groundwater samples collected from wells. This approach is expensive, and provides limited and lagging information about the effectiveness of cleanup activities and the behavior of the residual contamination. Over the last twenty years, DOE and other federal agencies have made significant investments in the development of various types of sensors and strategies that would allow for remote analysis of contaminants in groundwater, but these approaches do not promise significant reductions in risk or cost. Scientists at SRS have developed a new paradigm to simultaneously improve the performance of long term monitoring systems while lowering the overall cost of monitoring. This alternative approach incorporates traditional point measurements of contaminant concentration with measurements of controlling variables including boundary conditions, master variables, and traditional plume/contaminant variables. Boundary conditions are the overall driving forces that control plume movement and therefore provide leading indication to changes in plume stability. These variables include metrics associated with meteorology, hydrology, hydrogeology, and land use. Master variables are the key variables that control the chemistry of the groundwater system, and include redox variables (ORP, DO, chemicals), pH, specific conductivity, biological community (breakdown/decay products), and temperature. A robust suite of relatively inexpensive tools is commercially available to measure these variables. Traditional plume/contaminant variables are various measures of contaminant concentration including traditional analysis of chemicals in groundwater samples. An innovative long term monitoring strategy has been developed for acidic or caustic groundwater plumes contaminated with metals and/or radionuclides. Not only should the proposed strategy be more effective at early identification of potential risks, this strategy should be significantly more cost effective because measurement of controlling boundary conditions and master variables is relatively simple. These variables also directly reflect the evolution of the plume through time, so that the monitoring strategy can be modified as the plume 'ages'. This transformational long-term monitoring paradigm will generate significant cost savings to DOE, other federal agencies and industry and will provide improved performance and leading indicators of environmental management performance. (authors)

54 ENVIRONMENTAL SCIENCES↗

The role of iron chemistry on the interpretation of lower mantle heterogeneities

Iron is a major element in the mantle and its chemical behavior (partitioning, spin transition) affect the physical and transport properties of the phases which host it. Such variations can provide explanations of major heterogeneities observed in the mantle. Magnesium silicate perovskite (Mg,Fe)SiO{sub 3} (Mg-pv) and ferropericlase (Mg,Fe)O (fp) are the dominant phases in the lower-mantle and can potentially host significant amount of iron. It is thus of prime importance to constrain element partitioning at high pressure for improving models of the deep Earth. We investigated iron partitioning between Mg-pv and fp synthetised under lower-mantle conditions (up to 115 GPa and 2200 K) in a laser heated diamond anvil cell (LH-DAC). Recovered samples were thinned to electron transparency by focused ion beam (FIB) and characterized by analytical transmission electron microscopy (ATEM). Addititional informations on trace elements were provided by measurements using nanometer scale ion probe (nanoSIMS). Iron concentrations in both phases were obtained from EDX measurements and nanoSIMS and are in excellent agreement. Our results are the first to show that recently reported transitions in the lower-mantle directly affect the evolution of Fe-Mg partitioning between both phases. Mg-pv is increasingly iron-depleted above 70-80 GPa possibly due to the high spin-low spin transition of iron in fp. Conversely, the perovskite to post-perovskite transition is accompanied by a strong iron enrichment of the silicate phase. We will discuss the implications of these partitioning variations in terms of potential heterogeneities. We will also address shortly the early history of the Earth, as the observation of nanoparticles of metallic iron in the Mg-pv bearing runs suggests the disproportionation of ferrous iron and the self-oxidation of the mantle while these particles were not observed when the post-perovskite (ppv) phase was present. Implications on the oxidation state of the Earth and core segregation will be discussed.

58 GEOSCIENCES↗

Stochastic approach to flat direction during inflation

We revisit the time evolution of a flat and non-flat direction system during inflation. In order to take into account quantum noises in the analysis, we base on stochastic formalism and solve coupled Langevin equations numerically. We focus on a class of models in which tree-level Hubble-induced mass is not generated. Although the non-flat directions can block the growth of the flat direction's variance in principle, the blocking effects are suppressed by the effective masses of the non-flat directions. We find that the fate of the flat direction during inflation is determined by one-loop radiative corrections and non-renormalizable terms as usually considered, if we remove the zero-point fluctuation from the noise terms.

79 ASTRONOMY AND ASTROPHYSICS↗

Nanoscale selective growth and microstructural control of indium nitride (InN)

Selective area growth (SAG) is a phenomenon in thin film deposition where the sample surface is masked by a dielectric or refractory layer such that growth takes place only in the exposed window regions. As the opening window is pushed to nano-scale, it becomes possible to confine and control epitaxial evolution with lithographically engineered geometry with a feature size comparable to that ofa single nucleus. Two fundamental questions in nano-scale SAG are studied. The first one is how does nano-scale constriction in one direction impact the microstructure evolution in the other orthogonal directions. The other question is how does the presence of nano-scale geometric boundaries affect the crystallographic orientation in selective area epitaxy? InN is chosen as a case study to demonstrate the efficacy and unveil the science in nano-scale SAG. For the first time, we achieve uniform InN nanowires in the large scale with nano-trenches. The engineering of InN nuclei with interfacial energy and the possibility of orientation filtering are also studied.

36 MATERIALS SCIENCE↗

How to Build an Empirical Speed Distribution for Dark Matter in the Solar Neighborhood

The dark matter flux in a direct detection experiment depends on its local speed distribution. This distribution has been inferred from simulations of Milky Way–like galaxies, but such models serve only as proxies, given that no simulation directly captures the detailed evolution of our own Galaxy. This motivates alternative approaches that obtain this distribution directly from observations. In this work, we utilize 98 Milky Way analogues from the TNG50 simulation to develop and validate a procedure for inferring the dark matter speed distribution using the kinematics of nearby stars. We find that the dark matter that originated from old mergers, plus that from recent nonluminous accretions, is well described by a Maxwell–Boltzmann speed distribution centered at the local standard-of-rest velocity. Meanwhile, recently accreted dark matter from massive mergers has speeds that can be traced from the associated stellar debris of these events. The stellar populations systematically underestimate the velocity dispersion of their dark matter counterparts, but a simple kinematic boost brings the two into good alignment. Using the TNG50 host galaxies, we demonstrate that combining these two contributions provides an accurate reconstruction of the local dark matter speeds. As an application of the procedure to our own Galaxy, we utilize stellar kinematic data from Gaia to quantify how the dark matter remnants from the Milky Way’s last major merger impact its speed distribution in the solar neighborhood.

Shpigel, Tal [Princeton Univ., NJ (United States)]↗

Microstructural evolution of thin film vanadium oxide prepared by pulsed-direct current magnetron sputtering

Vanadium oxide (VO{sub x}) thin films have been deposited by pulsed-DC magnetron sputtering using a metallic vanadium target in a reactive argon and oxygen environment. While the process parameters (power, total pressure, oxygen-to-argon ratio) remained constant, the deposition time was varied to produce films between 75 {+-} 6 and 2901 {+-} 30 A thick, which were then optically and electrically characterized. The complex dielectric function spectra ({epsilon} = {epsilon}{sub 1} + i{epsilon}{sub 2}) of the films from 0.75 to 5.15 eV were extracted by ex situ, multiple-angle spectroscopic ellipsometry (SE) measurements for the series of varied thickness VO{sub x} samples. Significant changes in {epsilon} and resistivity occur as a function of thickness, indicating the correlations exist between the electrical and the optical properties over this spectral range. In addition, in situ measurements via real time SE (RTSE) were made on the film grown to the largest thickness to track optical property and structural variations during growth. RTSE was also used to characterize changes in the film occurring after growth was completed, namely during post sputtering in the presence of argon and oxygen while the sample is shielded, and atmospheric exposure. RTSE indicates that the exposure of the film to the argon and oxygen environment, regardless of the shutter isolating the target, causes up to 200 A of the top surface of the deposited film to become more electrically resistive as evidenced by variations in {epsilon}. Exposure of the VO{sub x} thin film to atmospheric conditions introduces a similar change in {epsilon}, but this change occurs throughout the bulk of the film. A combination of these observations with RTSE results indicates that thinner, less ordered VO{sub x} films are more susceptible to drastic changes due to atmospheric exposure and that microstructural variations in this material ultimately control its environmental stability.

36 MATERIALS SCIENCE↗

Atomistic study of grain boundary sink strength under prolonged electron irradiation

Grain boundaries (GBs) are sinks and sources of point defects, which are produced in large number under radiation damage. As grain size decreases, many of the point defects sink into GBs. It is unknown whether GBs will saturate as sinks of point defects, particularly when grain size is at the nanoscale. Using a combination of molecular dynamics (MD) simulations and rate theory for BCC Mo, the authors show that large-angle GBs do not saturate as sinks of point defects. The MD simulations serve to provide direct measurement of defect evolution, and the rate theory serves to test whether grain boundary sink strength is a constant and to extend the MD results to realistic defect production rates.

36 MATERIALS SCIENCE↗

Chemical and phase evolution of amorphous molybdenum sulfide catalysts for electrochemical hydrogen production [Chemical and phase evolution of amorphous molybdenum sulfide catalysts for electrochemical hydrogen production directly observed using environmental transmission electron microscopy]

Amorphous MoS x is a highly active, earth-abundant catalyst for the electrochemical hydrogen evolution reaction. Previous studies have revealed that this material initially has a composition of MoS 3 , but after electrochemical activation, the surface is reduced to form an active phase resembling MoS 2 in composition and chemical state. However, structural changes in the Mo Sx catalyst and the mechanism of the activation process remain poorly understood. In this study, we employ transmission electron microscopy (TEM) to image amorphous MoS x catalysts activated under two hydrogen-rich conditions: ex situ in an electrochemical cell and in situ in an environmental TEM. For the first time, we directly observe the formation of crystalline domains in the MoS x catalyst after both activation procedures as well as spatially localized changes in the chemical state detected via electron energy loss spectroscopy. Using density functional theory calculations, we investigate the mechanisms for this phase transformation and find that the presence of hydrogen is critical for enabling the restructuring process. Our results suggest that the surface of the amorphous MoS x catalyst is dynamic: while the initial catalyst activation forms the primary active surface of amorphous MoS 2 , continued transformation to the crystalline phase during electrochemical operation could contribute to catalyst deactivation. Finally, these results have important implications for the application of this highly active electrocatalyst for sustainable H 2 generation.

36 MATERIALS SCIENCE↗

Asymptotic behavior of the mixed mass in Rayleigh–Taylor and Richtmyer–Meshkov instability induced flows

Rayleigh–Taylor instability (RTI) and Richtmyer–Meshkov instability (RMI) are serious practical issues in inertial confinement fusion research, and also have relevance to many cases of astrophysical fluid dynamics. So far, much of the attention has been paid to the late-time scaling of the mixed width, which is used as a surrogate to how well the fluids have been mixed. Yet, the actual amount of mixed mass could be viewed as a more direct indicator on the evolution of the mixing layers due to hydrodynamic instabilities. Despite its importance, there is no systematic study as yet on the scaling of the mixed mass for either the RTI or the RMI induced flow. In this article, the normalized mixed mass (Ψ) is introduced for measuring the efficiency of the mixed mass. Six large numerical simulation databases have been employed: the RTI cases with heavy-to-light fluid density ratios of 1.5, 3, and 9; the single shock RMI cases with density ratios of 3 and 20; and a reshock RMI case with density ratio of 3. Using simulated flow fields, the normalized mixed mass Ψ is shown to be more sensitive in discriminating the variation with Atwood number for the RTI flows. Moreover, Ψ is demonstrated to provide more consistent results for both the RTI and RMI flows when compared with the traditional mixedness parameters, Ξ and Θ.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗