SEARCH · Search NASA

Results for “Dynamic phases”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

All sources NASA NTRS DOE OSTI

NASA NTRS2012

DDS-Suite - A Dynamic Data Acquisition, Processing, and Analysis System for Wind Tunnel Testing

Wind Tunnels have optimized their steady-state data systems for acquisition and analysis and even implemented large dynamic-data acquisition systems, however development of near real-time processing and analysis tools for dynamic-data have lagged. DDS-Suite is a set of tools used to acquire, process, and analyze large amounts of dynamic data. Each phase of the testing process: acquisition, processing, and analysis are handled by separate components so that bottlenecks in one phase of the process do not affect the other, leading to a robust system. DDS-Suite is capable of acquiring 672 channels of dynamic data at rate of 275 MB / s. More than 300 channels of the system use 24-bit analog-to-digital cards and are capable of producing data with less than 0.01 of phase difference at 1 kHz. System architecture, design philosophy, and examples of use during NASA Constellation and Fundamental Aerodynamic tests are discussed.

Burnside, Jathan J.↗

DOE OSTI2026

Infrared triggered dwell and active cooling thermal control effects on microstructural uniformity in DED

Directed Energy Deposition (DED) offers rapid large scale fabrication, but difficulty in delivering consistent microstructures and properties hinders the use of DED fabricated components in safety or performance critical applications. Variability stems from the complex thermal cycles generated by the toolpath used to print the required geometry. Several practical methods have become established in DED to regulate overheating, such as active cooling of the baseplate structure or the use of an infrared camera to inject interlayer pauses to ensure the top layer of the component cools to a set temperature, which have been shown to affect microstructure. However, no critical assessment has been performed as to how effective these controls are in promoting microstructural uniformity in the context of complex layer timing commonly generated by non-prismatic geometries. Here we show how controls influence the thermal field, phase transformations, and dynamic annealing of a low-temperature transformation steel using infrared imaging and operando neutron diffraction. Counterintuitively, common thermal homogenization process controls can reduce microstructural uniformity because these approaches stabilize peak temperature while overlooking temperatures near the solid-state phase transformation fronts. Instead, the cyclic reheating induces spatially-variant dynamically annealed regions which can be modulated via control parameters. We show that these controls have spatially linked effects centimeters away from the active weld, which implies that microstructure control must co-optimize thermal input across many subsequent layers. In conclusion, our results demonstrate the pressing need for higher order controls that integrate predictive elements of simulation data to stabilize printed properties for future qualification of DED components.

Directed energy deposition↗

DOE OSTI2025

Primordial black holes and magnetic fields in conformal neutrino mass models

Sufficiently strong and long-lasting first-order phase transitions can produce primordial black holes (PBHs) that contribute substantially to the dark matter abundance of the Universe, and can produce large-scale primordial magnetic fields. Here, we study these mechanisms in a generic class of conformal U(1)' models that also explain active neutrino oscillation data via the type-I seesaw mechanism. We find that phase transitions that occur at seesaw scales between 10 4 GeV and 10 11 GeV produce gravitational wave signals (from the dynamics of the phase transition and from the decay of cosmic string loops) at LISA/ET that can be correlated with microlensing signals of PBHs at the Roman Space Telescope, while scales near 10 11 GeV can be correlated with Hawking evaporation signals at future gamma-ray telescopes. LISA can probe the entire range of PBH masses between 1 × 10 -16 M ⊙ and 8 × 10 -11 M ⊙ if PBHs fully account for the dark matter abundance. For Z' masses between 40 TeV and 10 4 TeV, and 10 TeV right-handed neutrinos, helical magnetic fields can be produced with magnitudes ≳ 0.5 pG and coherence lengths ≳ 0.008 Mpc, above current blazar lower bounds.

cosmological phase transitions↗

NASA NTRSDate not supplied

Validation of Thermodynamic Behavior of Liquid Propellants under Sloshing and Draining

In recent years, considerable effort has been devoted to studying the future use of liquid methane (LCH4) in land, air, and space vehicle applications because of its high density and handling characteristics. This work presents a validation of computational tools for the thermodynamics characterization of a propellant tank undergoing sloshing and draining-induced thermal destratification as part of our continuous effort to improve simulation capabilities for support of NASA’s current and future flight programs. A multi-phase computational fluid dynamics (CFD) code developed at NASA MSFC, Loci/STREAM-VOF, is applied to predict gaseous pressurant requirements during the ramping, holding, and draining phases of operation with liquid methane. The experimental work conducted at the NASA K-site facility is used for validation. The effort showed that Loci/STREAM-VOF is capable of capturing the important findings from the previous experiments: (1) the pressurant mass required increases with the expulsion time due to longer mass transfer time at the interface; and (2) the pressurant mass required decreases with the increase in inlet temperature. Comparison with experimental data shows consistent good agreement at different expulsion times and different inlet gas temperatures.

H. Q. Yang↗

NASA NTRSDate not supplied

Validation of Thermodynamic Behavior of Liquid Propellants under Sloshing and Draining

CFD↗

NASA NTRS1979

First principles numerical model of avalanche-induced arc discharges in electron-irradiated dielectrics

The model consists of four phases: single electron dynamics, single electron avalanche, negative streamer development, and tree formation. Numerical algorithms and computer code implementations are presented for the first three phases. An approach to developing a code description of fourth phase is discussed. Numerical results are presented for a crude material model of Teflon.

Beers, B. L.↗

NASA NTRS1994

DYNAMX: A Low Temperature Microgravity Investigation of Phase Transitions

The Critical Dynamics in Microgravity Experiment, DYNAMX, will investigate the effects on the superfluid transition in 4 He of currents generated by heat flow, measuring the thermal conductivity in the fluid as a function of applied heat. DYNAMX will also take advantage of the weightless environment to measure the conductivity properties in the region of the interface between the two phases. Thus, DYNAMX represents an experiment that will explore a system driven far from equilibrium. This paper will describe the science objectives, the current design of the experiment apparatus, the steps being taken to prepare this experiment for flight, and the results of ground-based feasibility demonstrations now underway.

superfluid↗

DOE OSTI2025

Applying deep learning methods to develop new models of molecular charge transfer, nonadiabatic dynamics, and nonlinear spectroscopy in the condensed phase

Photon- and field-induced charge transfer has central importance in the generation and storage of electricity, the novel properties of materials, photo-induced catalysis, and electro-optic activity (e.g., photovoltaic cells, fuel cells, and organic chromophores for use in optical fibers and light-emission diodes). These non-equilibrium electronic and chemical transformations are probed by ultrafast, nonlinear spectroscopies. Accurate simulations play a crucial role in our ability to understand, optimize, and control these transformations. This project applies modern deep learning and machine learning (ML) methods to dramatically improve models of electronic dynamics, electronic-nuclear dynamics, and spectroscopic measurements for improved simulations of chemistry in complex environments, far from equilibrium phenomena, and processes in extreme environments, such as materials exposed to strong or resonant fields. This project develops accurate neural net models that go beyond predictive capability to also provide new insight into the fundamental physics underlying electron and nuclear dynamics. To achieve its objectives, this project explores and develops customized versions of high-capacity deep learning algorithms/models. These techniques are developed with an emphasis on fundamental chemical insight, not just predictive accuracy, to assist the development of the next generation of quantum simulation methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1976

Experimental dynamic stiffness and damping of externally pressurized gas-lubricated journal bearings

A rigid vertical shaft was operated with known amounts of unbalance at speeds to 30,000 rpm and gas supply pressure ratios to 4.8. From measured amplitude and phase angle data, dynamic stiffness and damping coefficients of the bearings were determined. The measured stiffness was proportional to the supply pressure, while damping was little affected by supply pressure. Damping dropped rapidly as the fractional frequency whirl threshold was approached. A small-eccentricity analysis overpredicted the stiffness by 20 to 70 percent. Predicted damping was lower than measured at low speeds but higher at high speeds.

Fleming, D. P.↗

NASA NTRS1976

Dynamic stiffness and damping of externally pressurized gas lubricated journal bearings

A rigid vertical shaft was operated with known amounts of unbalance at speeds up to 30,000 rpm and gas supply pressure ratios to 4.8. From measured amplitude and phase angle data, dynamic stiffness and damping coefficients of the bearings were determined. The measured stiffness was proportional to the supply pressure, while damping was little affected by supply pressure. Damping dropped rapidly as the fractional frequency whirl threshold was approached. A small eccentricity analysis overpredicted the stiffness by 4 to 55 percent. Predicted damping was close to measured at low speeds but higher at high speeds

Fleming, D. P.↗

DOE OSTI2025

Depinning, melting, and sliding of generalized Wigner crystals in Moiré systems

We numerically examine the depinning, sliding, and melting of commensurate and incommensurate Wigner crystals on two-dimensional hexagonal periodic substrates near fillings of 1 / 3 , 1 / 2 , and 2 / 3 to model the dynamics of generalized Wigner crystals in moiré heterostructures. At low temperatures where thermal fluctuations are irrelevant, for commensurate fillings we find a strongly pinned state that depins into a sliding crystal, while at incommensurate fillings the depinning threshold is strongly reduced. For fillings below 1 / 2 , the depinning occurs in a two-step process. Above the first depinning threshold, there is an extended range of drives where the conduction occurs via the sliding of antikinks along the charge stripes, followed by a second threshold where all the charges begin to slide. At finite temperatures, the external driving reduces the effective melting temperature at commensurate fillings and enhances creep at incommensurate fillings. We show that depinning into different sliding states, such as moving fluids or moving crystals, produces nonlinear features in the transport curves. We also show that transport is asymmetric on either side of a commensurate filling due to the different dynamics for interstitials versus holes in the commensurate structure. A variety of sliding states should be accessible for generalized Wigner crystals at finite temperatures even for low drives. If experiments can realize sliding dynamics in moiré systems, it would open another class of commensurate and incommensurate phases for study. Additionally, the sliding dynamics and antikink flow could provide unique functionalities for charge transport in moiré heterostructures. Published by the American Physical Society 2025

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2026

Atomic Evolution of Hydrogen Intercalation Wave Dynamics in Palladium Nanocrystals Revealed by Liquid-Phase Transmission Electron Microscopy

Solute-intercalation-induced phase separation creates spatial heterogeneities in host materials, a phenomenon ubiquitous in batteries, hydrogen storage, and other energy devices. Despite many efforts, probing intercalation processes at the atomic scale has been a significant challenge. By utilizing liquid-phase transmission electron microscopy (TEM), we study hydrogen (de)intercalation in palladium nanocrystals as a model system and have achieved unprecedented atomic-resolution imaging of hydrogen intercalation wave dynamics. Our observations reveal that intercalation wave mechanisms, instead of shrinking-core mechanisms, prevail at ambient temperature for palladium nanocubes ranging from ∼60 nm down to ∼10 nm. Systematic image analysis uncovers the atomic evolution of the hydrogen intercalation wave, transitioning from nonplanar and inclined boundaries to those closely aligned with {100} planes. Our kinetic Monte Carlo simulations demonstrate that the observed intercalation wave dynamics correspond to sorption pathways minimizing the lattice mismatch strain at the phase boundary. In conclusion, unveiling the atomic intercalation pathways holds profound implications for engineering intercalation-mediated devices and advancements in energy sciences.

Lee, Daewon [Lawrence Berkeley National Laboratory↗

NASA NTRS1998

Stochastic feedback and the regulation of biological rhythms

We propose a general approach to the question of how biological rhythms spontaneously self-regulate, based on the concept of "stochastic feedback". We illustrate this approach by considering at a coarse-grained level the neuroautonomic regulation of the heart rate. The model generates complex dynamics and successfully acounts for key characteristics of cardiac variability, including the l/f power spectrum, the functional form and scaling of the distribution of variations, and correlations in the Fourier phases indicating nonlinear dynamics.

NASA Discipline Cardiopulmonary↗

NASA NTRS2020

Hierarchical Coupling of Molecular Dynamics and Micromechanics to Predict the Elastic Properties of Three-Phase and Four-Phase Silicon Carbide Composites

The results obtained from previously conducted molecular dynamics analysis of silicon carbide (-SiC (6H, 4H, & 2H-SiC), -SiC (3C SiC)), silicon and boron nitride, were utilized as inputs in the MAC/GMC micromechanics software to model and evaluate the elastic properties of three-phase SiC/BN/SiC and four-phase SiC/BN/Si/SiC composites. This method of analysis eliminates the need for back-calculation of the apparent properties of the base constituents from the measured ceramic matrix composites properties. The multiscale models are validated against the available data in literature.

Aluko, Olanrewaju↗

NASA NTRS1995

Nonlinear system guidance in the presence of transmission zero dynamics

An iterative procedure is proposed for computing the commanded state trajectories and controls that guide a possibly multiaxis, time-varying, nonlinear system with transmission zero dynamics through a given arbitrary sequence of control points. The procedure is initialized by the system inverse with the transmission zero effects nulled out. Then the 'steady state' solution of the perturbation model with the transmission zero dynamics intact is computed and used to correct the initial zero-free solution. Both time domain and frequency domain methods are presented for computing the steady state solutions of the possibly nonminimum phase transmission zero dynamics. The procedure is illustrated by means of linear and nonlinear examples.

Meyer, G.↗

DOE OSTI2024

Observation of stacking engineered magnetic phase transitions within moiré supercells of twisted van der Waals magnets

Abstract Recent demonstrations of moiré magnetism, featuring exotic phases with noncollinear spin order in the twisted van der Waals (vdW) magnet chromium triiodide CrI 3 , have highlighted the potential of twist engineering of magnetic (vdW) materials. However, the local magnetic interactions, spin dynamics, and magnetic phase transitions within and across individual moiré supercells remain elusive. Taking advantage of a scanning single-spin magnetometry platform, here we report observation of two distinct magnetic phase transitions with separate critical temperatures within a moiré supercell of small-angle twisted double trilayer CrI 3 . By measuring temperature-dependent spin fluctuations at the coexisting ferromagnetic and antiferromagnetic regions in twisted CrI 3 , we explicitly show that the Curie temperature of the ferromagnetic state is higher than the Néel temperature of the antiferromagnetic one by ~10 K. Our mean-field calculations attribute such a spatial and thermodynamic phase separation to the stacking order modulated interlayer exchange coupling at the twisted interface of moiré superlattices.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Unraveling the Atomic Mechanism of the Crystalline Phase‐Dependent Structural Features and Special Spectral Design of α‐, β‐, and Ɛ‐Ga₂O₃

Atomic‐scale phase transformations profoundly influence the functional properties of Ga₂O₃ polymorphs. By combining irradiation experiments with microstructure characterization and theoretical approaches, phase‐specific energy‐dissipation pathways in α‐, β‐, and ε‐Ga₂O₃ are uncovered and strategies for targeted property design are outlined. Competing antiphase boundaries (APBs) and twin domain boundaries (TDBs) promote irreversible α→ε interconversion through domain fragmentation. In β‐Ga₂O₃, defect‐induced stress gradients drive two distinct local transformations: surface Ga‐aggregated β→δ that stabilizes transient states, and latent‐track‐confined β→κ phase transition with recoverable distortions via cation reordering. Under electronic excitation, β‐Ga₂O₃ forms nanohillocks via robust GaO₆ octahedra (high density/strong Ga─O bonds), while α/ε‐Ga₂O₃ generates nanopores from tetrahedral Ga looseness (low bonding energy), highlighting phase‐dependent surface dynamics shaped by atomic packing and bonding anisotropy. Defect‐regulated recombination suppresses visible photoluminescence in α/β‐Ga₂O₃, whereas in ε‐Ga₂O₃ bandgap narrowing of ΔE: 0.30 eV is observed, enhancing emission. Linking phase‐dependent defect‐carrier interactions and metastable‐phase engineering in Ga₂O₃ enables property optimization for power‐electronics and optoelectronics devices.

electronic state configuration↗

NASA NTRS1985

Robustness of velocity feedback controllers for flexible spacecraft

The robustness properties of collocated velocity feedback controllers used for damping enhancement in large, flexible space structures are investigated. It is proved that the closed-loop system using such controllers is asymptotically stable in the large when: (1) unmodeled linear time-invariant dynamics (such as sensors/actuators) are present, provided that the phase angle of such dynamics is between -90 deg and 90 deg; (2) time-varying or invariant nonlinearities lying in the first and the third quadrant (i.e., belonging to the /0, infinity/ sector) are present; or (3) sector-type nonlinearities following first-order stable dynamics are present in the feedback loop.

Joshi, S. M.↗