Search NASA⌕ Search

SEARCH · Search NASA

Results for “EXPANSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Expansion and photosynthetic rate of leaves of soybean plants during onset of and recovery from nitrogen stress

This study reports on the effects of nitrogen stress and restoration of nitrogen availability after a period of stress on expansion and photosynthetic rate of soybean leaves of differing maturity. We hypothesized that nitrogen resupply would lead to additional accumulation of reduced nitrogen in the leaves and, ultimately, resumption of leaf initiation and expansion and photosynthetic activity. In continuously nitrogen-stressed plants, expansion of middle trifoliolates of main-stem trifoliates and leaf area at full expansion were severely restricted. Leaves showing the greatest effects were initiated after removal of nitrogen. When the reduced nitrogen concentration in mature leaves of continuously stressed plants fell below 9 mg dm-2, the photosynthetic rate per unit leaf decreased rapidly, reaching a minimum of ca. 6-8 mg dm-2 h-1. The older mature leaves tended to abscise at this point, while the youngest leaves remained on the plant and continued to photosynthesize slowly. When nitrogen was resupplied, leaf expansion and final leaf area increased. Leaf initiation was also stimulated as reduced nitrogen levels rose in the leaves. Photosynthetic rates of the oldest and youngest pair of mature leaves returned to values comparable to those of similar-aged leaves of nonstressed soybean plants.

NASA Discipline Number 61-10↗

Thermal Expansion of Vacuum Plasma Sprayed Coatings

Metallic Cu-8%Cr, Cu-26%Cr, Cu-8%Cr-1%Al, NiAl and NiCrAlY monolithic coatings were fabricated by vacuum plasma spray deposition processes for thermal expansion property measurements between 293 and 1223 K. The corrected thermal expansion, (DL/L(sub 0) varies with the absolute temperature, T, as (DL/L(sub 0) = A(T - 293)(sup 3) + BIT - 293)(sup 2) + C(T - 293) + D, where, A, B, C and D are thermal, regression constants. Excellent reproducibility was observed for all of the coatings except for data obtained on the Cu-8%Cr and Cu-26%Cr coatings in the first heat-up cycle, which deviated from those determined in the subsequent cycles. This deviation is attributed to the presence of residual stresses developed during the spraying of the coatings, which are relieved after the first heat-up cycle. In the cases of Cu-8%Cr and NiAl, the thermal expansion data were observed to be reproducible for three specimens. The linear expansion data for Cu-8% Cr and Cu-26%Cr agree extremely well with rule of mixture (ROM) predictions. Comparison of the data for the Cu-8%Cr coating with literature data for Cr and Cu revealed that the thermal expansion behavior of this alloy is determined by the Cu-rich matrix. The data for NiAl and NiCrAlY are in excellent agreement with published results irrespective of composition and the methods used for processing the materials. The implications of these results on coating GRCop-84 copper alloy combustor liners for reusable launch vehicles are discussed.

Raj, S V.↗

Relationship Between the Expansion Speed and Radial Speed of CMEs Confirmed Using Quadrature Observations from SOHO and STEREO

It is difficult to measure the true speed of Earth-directed CMEs from a coronagraph along the Sun-Earth line because of the occulting disk. However, the expansion speed (the speed with which the CME appears to spread in the sky plane) can be measured by such coronagraph. In order to convert the expansion speed to radial speed (which is important for space weather applications) one can use empirical relationship between the two that assumes an average width for all CMEs. If we have the width information from quadrature observations, we can confirm the relationship between expansion and radial speeds derived by Gopalswamy et al. (2009, CEAB, 33, 115,2009). The STEREO spacecraft were in quadrature with SOHO (STEREO-A ahead of Earth by 87 and STEREO-B 94 behind Earth) on 2011 February 15, when a fast Earth-directed CME occurred. The CME was observed as a halo by the Large-Angle and Spectrometric Coronagraph (LASCO) on board SOHO. The sky-plane speed was measured by SOHO/LASCO as the expansion speed, while the radial speed was measured by STEREO-A and STEREO-B. In addition, STEREO-A and STEREO-B images measured the width of the CME, which is unknown from Earth view. From the SOHO and STEREO measurements, we confirm the relationship between the expansion speed (Vexp ) and radial speed (Vrad ) derived previously from geometrical considerations (Gopalswamy et al. 2009): Vrad = 1/2 (1 + cot w) Vexp, where w is the half width of the CME. STEREO-B images of the CME, we found that CME had a full width of 75 degrees, so w = 37.5 degrees. This gives the relation as Vrad = 1.15 Vexp. From LASCO observations, we measured Vexp = 897 km/s, so we get the radial speed as 1033 km/s. Direct measurement of radial speed from STEREO gives 945 km/s (STEREO-A) and 1057 km/s (STEREO-B). These numbers are different only by 2.3% and 8.5% (for STEREO-A and STEREO-B, respectively) from the computed value.

Gopalswamy, Nat↗

Lattice-structures and constructs with designed thermal expansion coefficients

A thermal expansion-managed lattice structure having a plurality of unit cells each having flexure bearing-mounted tabs supported on a base and actuated by thermal expansion of an actuator having a thermal expansion coefficient greater than the base and arranged so that the tab is inwardly displaced into a base cavity. The flexure bearing-mounted tabs are connected to other flexure-bearing-mounted tabs of adjacent unit cells so that the adjacent unit cells are spaced from each other to accommodate thermal expansion of individual unit cells while maintaining a desired bulk thermal expansion coefficient of the lattice structure as a whole.

42 ENGINEERING↗

Method for tuning thermal expansion properties in an additive manufacturing feedstock material

A feedstock material for use in an additive manufacturing apparatus is prepared from a first material and a metal organic framework (MOF). The MOF comprises a plurality of nodes and a plurality of linkers, the plurality of linkers coupled to the plurality of nodes, thereby forming a framework. The MOF has a lower coefficient of thermal expansion than a coefficient of thermal expansion for the first material. As a result, the feedstock material has a reduced coefficient of thermal expansion as compared to the first material alone and thus exhibits low thermal expansion as its temperature is increased. The coefficient of thermal expansion for the MOF may be modified by using a different plurality of nodes and/or a different plurality of linkers, as well as by incorporating guest molecules or atoms into the framework of the MOF.

Burtch, Nicholas C.↗

Analysis of Lattice Baryon Masses in 1/Nc expansion

The 1/Nc expansion of QCD is a perturbative and successful framework for the phenomenology of ground state and excited state baryons. As proposed in [1], it is a systematic expansion in powers of 1/Nc and a good approximation, qualitatively and quantitatively, when Nc=3. The 1/Nc expansion has been applied to the ground state baryons including studies of SU(6) spin-flavor symmetry in [2]. A framework was suggested in [3] for excited baryons based on the 1/Nc expansion was implemented and analyzed with the physical masses from the Particle Data Group. And a successful calculation of the spin identified spectrum of Nucleons and Deltas has been carried out in lattice QCD [4]. Using mass operators organized according to the 1/Nc expansion, the analysis of lattice baryon masses has been completed for the negative parity baryons in the multiplet [70,1]? of the SU(6)×O(3) representation, and results for that multiplet and the rest of the multiplets will be presented in this talk.\\[4pt] [1] G. 'tHooft Nucl.Phys.B72, 461(1974).\\[0pt] [2] R.F. Dashen, E.E. Jenkins, and A.V. Manohar Phys.Rev.D51 (1995).\\[0pt] [3] C.E. Carlson, C.D. Carone, J.L. Goity, R.F. Lebed Phys.Rev.D59 (1999).\\[0pt] [4] R.G. Edwards, J.J. Dudek, D.G. Richards, S.J. Wallace Phys.Rev.D84 (2011).

Fernando, Ishara↗

The $\hbar$ Expansion in Quantum Field Theory

We show how expansions in powers of Planck's constant {h_bar} = h = 2{pi} can give new insights into perturbative and nonperturbative properties of quantum field theories. Since {h_bar} is a fundamental parameter, exact Lorentz invariance and gauge invariance are maintained at each order of the expansion. The physics of the {h_bar} expansion depends on the scheme; i.e., different expansions are obtained depending on which quantities (momenta, couplings and masses) are assumed to be independent of {h_bar}. We show that if the coupling and mass parameters appearing in the Lagrangian density are taken to be independent of {h_bar}, then each loop in perturbation theory brings a factor of {h_bar}. In the case of quantum electrodynamics, this scheme implies that the classical charge e, as well as the fine structure constant are linear in {h_bar}. The connection between the number of loops and factors of {h_bar} is more subtle for bound states since the binding energies and bound-state momenta themselves scale with {h_bar}. The {h_bar} expansion allows one to identify equal-time relativistic bound states in QED and QCD which are of lowest order in {h_bar} and transform dynamically under Lorentz boosts. The possibility to use retarded propagators at the Born level gives valence-like wave-functions which implicitly describe the sea constituents of the bound states normally present in its Fock state representation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surviving nanoscale interfacial stability in extreme thermal expansion contrast Zn(CN) 2 -epoxy resin matrix composites

Here, we report the remarkable stability at the nanoscale matrix-filler interface in a series of overall low coefficient of thermal expansion (CTE) zinc cyanide (ZC)/epoxy resin composites. These interfaces demonstrate the stability of highly contrasting materials. These composites are designed to optimize the properties of both materials: epoxy resins are valued for their high strength, superb chemical resistance, low dielectric properties, and adhesive abilities. ZC, a model flexible framework, exhibits negative thermal expansion (NTE) behavior and compensates for the epoxy resin’s detrimentally large thermal expansion values. Filled resins minimize the native 65 ppm/°C CTE values to 19 ppm/° C over a wide temperature range while maintaining linearity, yielding composites compatible with typical metal and ceramic substrates’—commonly bonded to the resin— 0–20 ppm/° C CTE values. Additionally, with significant intrinsic differences in the materials, we use wide-angle X-ray diffraction and atomic force microscopy to elucidate thermal movement. The ZC/epoxy interface is surprisingly resilient over 1,000 cycles between -55° C and 75° C, extremes typical to aerospace applications. Further, we show that the resin viscosity remains less than 21 Pa*s at up to 30 vol% ZC, an important consideration for workability. We also discuss settling distribution, glass transition temperature, flexural strength, and longevity. All results point favorably towards practical implementation in low thermal expansion application needs: filling the gap in component design.

42 ENGINEERING↗

Defect structure, electronic conductivity and expansion of properties of (La{sub 1-x}Sr{sub x}){sub s}Co{sub 1-y}Ni{sub y}O{sub 3-{delta}}

This study reports on oxygen nonstoichiometry, electronic conductivity and lattice expansion of three compositions as function of T and P{sub O{sub 2}} in the (La{sub 1-x}Sr{sub x}){sub s}Co{sub 1-y}Ni{sub y}O{sub 3-{delta}}(x=0.1, y=0.4; x=0.1, y=0.3; x=0.2, y=0.2) materials system. The nonstoichiometry data were successfully fitted using the itinerant electron model which indicates the existence of delocalized electronic states. This was also reflected in the high electronic conductivities, above 1000 S cm{sup -1}, measured for all three compositions. The electronic conductivity was shown to decrease linearly with the oxygen nonstoichiometry parameter, {delta}, supporting that the conductivity is dependent on p-type charge carriers. Comparing calculated p-type mobilities with data reported in literature on La{sub 1-x}Sr{sub x}CoO{sub 3} indicated that Ni-substitution into (La{sub 1-x}Sr{sub x}){sub s}CoO{sub 3-{delta}}increases the p-type mobility. The electronic conductivity was also found to be dependent on intrinsic charge related to spin excitations and Ni substitution rather than the p-type charge. A conductivity mechanism is hypothesized including a metallic like conductivity of the p-type charge and a small polaron conductivity of the intrinsic charge. Lattice expansion as function of T and {delta} was successfully described using first and second order thermal and chemical expansion coefficients. Substituting 10% Co with Ni in (La{sub 0.6}Sr{sub 0.4}){sub 0.99}CoO{sub 3-{delta}}was found to decrease the apparent thermal expansion with about 25%. - Graphical Abstract: Electronic conductivity as function of temperature for (La{sub 0.8}Sr{sub 0.2}){sub 0.99}Co{sub 0.8}Ni{sub 0.2}O{sub 3-{delta}}. A model with metallic like conductivity for the extrinsic p-type charge carrier (due to Sr substitution) and small polaron conductivity for intrinsic charge carriers (due to Co spin transitions) was found to best describe the total conductivity.

36 MATERIALS SCIENCE↗

Problems and solutions for the analysis of somatic CAG repeat expansion and their relationship to Huntington's disease toxicity

Huntington’s Disease is caused by inheritance of a single disease-length allele harboring an expanded CAG repeat, which continues to expand in somatic tissues with age. Whether somatic expansion contributed to toxicity was unknown. From extensive work from multiple laboratories, it has been made clear that toxicity depended on length of the inherited allele, but whether preventing or delaying somatic repeat expansion in vivo would be beneficial was unknown, since the inherited disease allele was still expressed. In Budworth et al., we provided definitive evidence that suppressing the somatic expansion in mice substantially delays disease onset in littermates that inherit the same disease-length allele. This key discovery opens the door for therapeutic approaches targeted at stopping or shortening the CAG tract during life. The analysis was difficult and, at times, non-standard. Here, we take the opportunity to discuss the challenges, the analytical solutions, and to address some controversial issues with respect to expansion biology.

59 BASIC BIOLOGICAL SCIENCES↗

Initial Comparison of Direct and Legacy Modeling Approaches for Radial Core Expansion Analysis

Radial core expansion in sodium-cooled fast reactors provides an important reactivity feedback effect. As the reactor power increases due to normal start up conditions or accident scenarios, the core and surrounding materials heat up, causing both grid plate expansion and bowing of the assembly ducts. When the core restraint system is designed correctly, the resulting structural deformations introduce negative reactivity which decreases the reactor power. Historically, an indirect procedure has been used to estimate the reactivity feedback due to structural deformation which relies upon perturbation theory and coupling legacy physics codes with limited geometry capabilities. With advancements in modeling and simulation, radial core expansion phenomena can now be modeled directly, providing an assessment of the accuracy of the reactivity feedback coefficients generated by indirect legacy methods. Recently a new capability was added to the PROTEUS-SN unstructured geometry neutron transport solver to analyze deformed meshes quickly and directly. By supplying the deformed mesh in addition to the base configuration input files, PROTEUS-SN automatically processes material adjustments including calculation of region densities to conserve mass, calculation of isotopic densities according to material models (for example, sodium density as a function of temperature), and subsequent re-homogenization of materials. To verify the new capability of directly simulating deformed meshes, PROTEUS-SN was used to compute reactivity feedback for a series of contrived yet representative deformed configurations for the Advanced Burner Test Reactor design. The indirect legacy procedure was also performed to generate reactivity feedback coefficients for the same deformed configurations. Interestingly, the legacy procedure consistently overestimated reactivity feedbacks by 35% compared to direct simulations by PROTEUS-SN. This overestimation indicates that the legacy procedures are in fact not conservative and could be overestimating reactivity feedback effects that are closely tied to reactor safety. We conclude that there is indeed value in performing direct simulation of deformed meshes despite the increased computational expense. PROTEUS-SN is already part of the SHARP multi-physics toolkit where both thermal hydraulics and structural mechanical feedback modeling can be applied but this is the first comparison of direct simulation to legacy techniques for radial core expansion.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Synchrotron Based Measurement of the Temperature Dependent Thermal Expansion Coefficient of Ammonium Perchlorate

Ammonium perchlorate is commonly used as an oxidizer in solid rocket propellant. Having a knowledge of its thermal expansion properties is essential for its application in different environments. Knowledge of thermal expansion properties is also useful for the prediction of propellant mechanical properties and response of propellant slow cook off applications. X-ray diffraction analysis was performed on ammonium perchlorate at temperatures ranging from 260 K to 500 K. From there, Bragg peaks were indexed by fitting theoretical values of 2θ to the 2θ values of peaks obtained from the experiment. Additionally, the Miller indices along with the 2θ values were then used to solve for the lattice parameters at each temperature. The lattice parameters, in nanometers, range from 0.9201 to 0.9373, 0.5805 to 0.5865, and 0.7439 to 0.7535 for a , b , and c , respectively. The measurement of the lattice parameter expansion leads to the determination of the temperature dependent thermal expansion coefficients within the temperature range. The lattice parameter values also lead to the determination of strain and stress on the ammonium perchlorate crystal. Direct measurement of the strain within the crystal lattice provides a more accurate measurement method over traditional optical-based techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Large N expansion of the moments and free energy of Sachdev-Ye-Kitaev model, and the enumeration of intersection graphs

In this paper we explain the relation between the free energy of the SYK model for N Majorana fermions with a random q-body interaction and the moments of its spectral density. The high temperature expansion of the free energy gives the cumulants of the spectral density. Using that the cumulants are extensive we find the p dependence of the 1/N 2 correction of the 2p-th moments obtained in [1]. Conversely, the 1/N 2 corrections to the moments give the correction (even q) to the β 6 coefficient of the high temperature expansion of the free energy for arbitrary q. Our result agrees with the 1/q 3 correction obtained by Tarnopolsky using a mean field expansion. These considerations also lead to a more powerful method for solving the moment problem and intersection-graph enumeration problems. We take advantage of this and push the moment calculation to 1/N 3 order and find surprisingly simple enumeration identities for intersection graphs. The 1/N 3 corrections to the moments, give corrections to the β 8 coefficient (for even q) of the high temperature expansion of the free energy which have not been calculated before. Results for odd q, where the SYK “Hamiltonian” is the supercharge of a supersymmetric theory are discussed as well.

1/N Expansion↗

Baroclinic vortex sheet production by shocks and expansion waves

Vortex sheet production by shocks and expansion waves refracting at a density discontinuity was examined and compared using an analytical solution and numerical simulations. The analytical solution showed that with a small exception, vortex sheet strength is generally stronger in fast/slow shock refractions. In contrast, expansion waves generated a stronger vortex sheet in slow/fast refractions. This difference results in larger vorticity deposited by shocks in fast/slow refractions and by expansion waves in slow/fast refractions. Shock refractions become irregular and the analytical solution fails when either incident, transmitted or reflected shock, exceeded the angle limit for an attached shock. To investigate vortex sheet production outside the range of analytical solutions and to verify the applicability of the planar-interface analytical solution to a curved interface, shock refraction through a sinusoidal interface was numerically simulated in the shock frame of reference. It is found that variation in the local incidence angle along the curved interface creates pressure waves that affect the level of deposited vorticity. This contributes to the difference between predictions from local analysis and numerical computation. Furthermore, an interesting behavior of the shock and expansion wave-deposited vorticity in supersonic ramp flow was discovered. When the high- and low-density streams were swapped, while keeping the incident flow Mach numbers constant, a vortex sheet of equal magnitude but of opposite sign was generated.

97 MATHEMATICS AND COMPUTING↗

Hypervelocity impact flash expansion geometry under various spacecraft surface electrical conditions

A more congested space environment due to increasing space activities introduces new threats to spacecraft operators. Among these threats include hypervelocity impacts from microparticles (< 1 µg) in the form of meteoroids and space debris. These microparticles travel at speeds between 11.2 and 72.8 km/s with respect to the Earth and can impact spacecraft forming a small (~1 µm) and dense (~ 10 26 m -3 ) plasma. This plasma can generate a strong optical emission (impact flash) and a radio frequency (RF) emission. These emissions can lead to spacecraft electrical anomalies when the impacted spacecraft surface (target) carries high electrical potential due to various space weather effects. To understand the microparticle hypervelocity impact plasma and its associated threat to spacecraft electronics, we studied the hypervelocity impact flash expansion geometry under various spacecraft surface electrical conditions. Three high-speed broadband photomultiplier tubes (PMT) are used to capture the temporal evolution of the impact flash and the temporal evolution of the angular distribution of the impact flash expansion geometry in a 3 MV electrostatic dust accelerator during a ground-based experiment. Overall, results indicate that the impact surface electrical condition has a statistically significant influence on the impact flash geometry, and a strong similarity between the impact plasma and flash expansion geometry. Thus, this paper provides new experimental support for the impact flash origin from and connection with the impact plasma, and serves as the first impact flash expansion geometry characterization under various impact surface electrical conditions in a collisionless environment (< 10 -5 Torr).

42 ENGINEERING↗

Adaptive sparse polynomial chaos expansion based on least angle regression

Polynomial chaos (PC) expansions are used in stochastic finite element analysis to represent the random model response by a set of coefficients in a suitable (so-called polynomial chaos) basis. The number of terms to be computed grows dramatically with the size of the input random vector, which makes the computational cost of classical solution schemes (may it be intrusive (i.e. of Galerkin type) or non intrusive) unaffordable when the deterministic finite element model is expensive to evaluate. To address such problems, the paper describes a non intrusive method that builds a sparse PC expansion. First, an original strategy for truncating the PC expansions, based on hyperbolic index sets, is proposed. Then an adaptive algorithm based on least angle regression (LAR) is devised for automatically detecting the significant coefficients of the PC expansion. Beside the sparsity of the basis, the experimental design used at each step of the algorithm is systematically complemented in order to avoid the overfitting phenomenon. The accuracy of the PC metamodel is checked using an estimate inspired by statistical learning theory, namely the corrected leave-one-out error. As a consequence, a rather small number of PC terms are eventually retained (sparse representation), which may be obtained at a reduced computational cost compared to the classical 'full' PC approximation. The convergence of the algorithm is shown on an analytical function. Then the method is illustrated on three stochastic finite element problems. The first model features 10 input random variables, whereas the two others involve an input random field, which is discretized into 38 and 30 - 500 random variables, respectively.

97 MATHEMATICS AND COMPUTING↗

A cluster expansion model for predicting activation barrier of atomic processes

We introduce a procedure based on cluster expansion models for predicting the activation barrier of atomic processes encountered while studying the dynamics of a material system using the kinetic Monte Carlo (KMC) method. Starting with an interatomic potential description, a mathematical derivation is presented to show that the local environment dependence of the activation barrier can be captured using cluster interaction models. Next, we develop a systematic procedure for training the cluster interaction model on-the-fly, which involves: (i) obtaining activation barriers for handful local environments using nudged elastic band (NEB) calculations, (ii) identifying the local environment by analyzing the NEB results, and (iii) estimating the cluster interaction model parameters from the activation barrier data. Once a cluster expansion model has been trained, it is used to predict activation barriers without requiring any additional NEB calculations. Numerical studies are performed to validate the cluster expansion model by studying hop processes in Ag/Ag(100). We show that the use of cluster expansion model with KMC enables efficient generation of an accurate process rate catalog.

97 MATHEMATICS AND COMPUTING↗

Thermal expansion of 4H and 6H SiC from 5 K to 340 K

The first thermal expansion measurements of the 4H and 6H polytypes of SiC below room temperature are reported. The measurements were carried out on single-crystal specimens using high-resolution capacitive-based dilatometry. For both polytypes, the thermal expansion coefficient is below 2.4 × 10 -6 1/K near room temperature. No phase transitions are observed over the 5 K to 340 K temperature range of the measurements. The thermal expansion coefficient α of 4H SiC is slightly anisotropic for measurements parallel and perpendicular to the crystallographic c axis with α ∥ about 2.2 × 10 -7 1/K larger than α ⟂ near room temperature. For 6H SiC no discernible anisotropy is observed. The differences in anisotropy can be understood by considering the ratio of hexagonal to cubic bonds of each polytype. Narrow regions with negative thermal expansion that are within the limits of our resolution (~ 1 x 10 -8 ) are observed in the vicinity of 30 K for both specimens. In conclusion, tabulated data, polynomial fits, fit parameters, and comparison to data based on lattice-parameter measurements are provided.

36 MATERIALS SCIENCE↗