Search NASA⌕ Search

SEARCH · Search NASA

Results for “Elemental Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Finite Element Analysis of a Deployable Space Structure

The dynamic characteristics of the Solar Array Flight Experiment (SAFE) structure during deployment and retraction are investigated. The SAFE structure consists of a deployable mast with an attached solar blanket designed with accordion type folds to permit packaging in a small volume. The planar form of the blanket geometry during deployment is maintained by a blanket tension/guidewire system. Structurally, the mast is modeled as an Euler beam column with inplane and out of plane bending and finite torsional stiffness. For out of plane motion, the blanket is modeled as a distributed mass uniformly supported by the three guidewires. For inplane motion the blanket displacements are assumed to vary linearly from the mast base to the mast tip. The mathematical model uses a virtual work formulation, required because the axial loading on the mast is nonconservative, combined with assumed beam modes to derive the differential equations of motion. Consideration of the time dependent boundary conditions results in an infinite set of ODE with time dependent coefficients. Finally, correlation of mast tip accelerations to mast base bending moments for specified modal motions are indicated.

Weeks, G. E.↗
NASA NTRS1986

Identification of differences between finite element analysis and experimental vibration data

An important problem that has emerged from combined analytical/experimental investigations is the task of identifying and quantifying the differences between results predicted by F.E. analysis and results obtained from experiment. The objective of this study is to extend and evaluate the procedure developed by Sidhu for correlation of linear F.E. and modal test data to include structures with viscous damping. The desirability of developing this procedure is that the differences are identified in terms of physical mass, damping, and stiffness parameters instead of in terms of frequencies and modes shapes. Since the differences are computed in terms of physical parameters, locations of modeling problems can be directly identified in the F.E. model. From simulated data it was determined that the accuracy of the computed differences increases as the number of experimentally measured modes included in the calculations is increased. When the number of experimental modes is at least equal to the number of translational degrees of freedom in the F.E. model both the location and magnitude of the differences can be computed very accurately. When the number of modes is less than this amount the location of the differences may be determined even though their magnitudes will be under estimated.

Lawrence, C.↗
NASA NTRS1986

Elemental analysis of a comet nucleus by passive gamma ray spectrometry from a penetrator

The Comet Rendezvous Asteroid Flyby (CRAF) spacecraft, to be launched in 1991, was designed to study the physical and chemical properties of cometary and asteroid bodies. It is proposed that these properties can be determined by utilizing a penetrator experiment delivery system aboard the CRAF, which would deliver a passive gamma ray spectrometer to the comet and determine the composition of subsurface materials. Results of calculations for a model comet (50 percent CI carbonaceous chrondrite, 50 percent ices) provide data on the expected gamma ray fluxes, the minimum detectable limits, and the detection uncertainties for 35 isotopes. These results confirm that this technique can determine the composition of both the rocky and ice components, and the rock-to-ice ratio in the nucleus. In addition, useful information regarding the formation of the solar system is provided.

Evans, L. G.↗
NASA NTRS1987

Finite-element analysis of corner cracks in rectangular bars

Stress intensity factors for a wide range of quarter-elliptical corner cracks in rectangular bars are presented. Cracked configurations were subjected to remote tension, in-plane bending, or out-of-plane bending. Results were compared with other numerical results for a quarter-circular corner crack configuration. The present results along the interior of the crack generally agreed within 3 percent with those from the literature. Some larger differences (3 to 13 percent) were observed near the intersection of the crack front and the free surfaces in the boundary layer region. Analyses were performed to study the effect of mesh refinement in the boundary layer region and the influence of Poisson's ratio on the distribution of stress-intensity factors.

Raju, L. S.↗
NASA NTRS1988

Validation of the NESSUS probabilistic finite element analysis computer program

A computer program, NESSUS, is being developed as part of a NASA-sponsored project to develop probabilistic structural analysis methods for propulsion system components. This paper describes the process of validating the NESSUS code, as it has been developed to date, and presents numerical results comparing NESSUS and exact solutions for a set of selected problems.

Wu, Y.-T.↗
NASA NTRS1988

Identification of differences between finite element analysis and experimental vibration data

An important problem that has emerged from combined analytical/experimental investigations is the task of identifying and quantifying the differences between results predicted by F.E. analysis and results obtained from experiment. The objective of this study is to extend and evaluate the procedure developed by Sidhu for correlation of linear F.E. and modal test data to include structures with viscous damping. The desirability of developing this procedure is that the differences are identified in terms of physical mass, damping, and stiffness parameters instead of in terms of frequencies and modes shapes. Since the differences are computed in terms of physical parameters, locations of modeling problems can be directly identified in the F.E. model. From simulated data it was determined that the accuracy of the computed differences increases as the number of experimentally measured modes included in the calculations is increased. When the number of experimental modes is at least equal to the number of translational degrees of freedom in the F.E. model both the location and magnitude of the differences can be computed very accurately. When the number of modes is less than this amount the location of the differences may be determined even though their magnitudes will be underestimated.

Lawrence, Charles↗
NASA NTRS1990

Integrated force method versus displacement method for finite element analysis

A novel formulation termed the integrated force method (IFM) has been developed in recent years for analyzing structures. In this method all the internal forces are taken as independent variables, and the system equilibrium equations (EE's) are integrated with the global compatibility conditions (CC's) to form the governing set of equations. In IFM the CC's are obtained from the strain formulation of St. Venant, and no choices of redundant load systems have to be made, in constrast to the standard force method (SFM). This property of IFM allows the generation of the governing equation to be automated straightforwardly, as it is in the popular stiffness method (SM). In this report IFM and SM are compared relative to the structure of their respective equations, their conditioning, required solution methods, overall computational requirements, and convergence properties as these factors influence the accuracy of the results. Overall, this new version of the force method produces more accurate results than the stiffness method for comparable computational cost.

Patnaik, Surya N.↗
NASA NTRS1989

Mechanics of graben formation in crustal rocks - A finite element analysis

The mechanics of the initial stages of graben formation are examined, showing that the configuration of a graben (a pair of antithetically dipping normal faults) is the most energetically favorable fault configuration in elastic-brittle rocks subjected to pure extension. The stress field in the vicinity of a single initial normal fault is computed with a two-dimensional FEM. It is concluded that the major factor controlling graben width is the depth of the initial fault.

Melosh, H. J.↗
NASA NTRS1989

Efficiency of group implicit concurrent algorithms for transient finite element analysis

The performance of group implicit algorithms is assessed on actual concurrent computers. It is shown that, as the number of subdomains is increased, performance enhancements are derived from two sources: the increased parallelism in the computations; and a reduction in equation solving effort. Moreover, these two performance enhancements are synergistic, in the sense that the corresponding speed-ups are multiplied, rather than merely added. Simulations on a 32-node hypercube are presented for which the interprocessor communications efficiencies obtained are consistently in excess of 90 percent.

Ortiz, M.↗
NASA NTRS1990

High-performance equation solvers and their impact on finite element analysis

The role of equation solvers in modern structural analysis software is described. Direct and iterative equation solvers which exploit vectorization on modern high-performance computer systems are described and compared. The direct solvers are two Cholesky factorization methods. The first method utilizes a novel variable-band data storage format to achieve very high computation rates and the second method uses a sparse data storage format designed to reduce the number of operations. The iterative solvers are preconditioned conjugate gradient methods. Two different preconditioners are included; the first uses a diagonal matrix storage scheme to achieve high computation rates and the second requires a sparse data storage scheme and converges to the solution in fewer iterations that the first. The impact of using all of the equation solvers in a common structural analysis software system is demonstrated by solving several representative structural analysis problems.

Poole, Eugene L.↗
NASA NTRS1991

Integrated force method versus displacement method for finite element analysis

A novel formulation termed the integrated force method (IFM) has been developed in recent years for analyzing structures. In this method all the internal forces are taken as independent variables, and the system equilibrium equations (EEs) are integrated with the global compatibility conditions (CCs) to form the governing set of equations. In IFM the CCs are obtained from the strain formulation of St. Venant, and no choices of redundant load systems have to be made, in constrast to the standard force method (SFM). This property of IFM allows the generation of the governing equation to be automated straightforwardly, as it is in the popular stiffness method (SM). In this report IFM and SM are compared relative to the structure of their respective equations, their conditioning, required solution methods, overall computational requirements, and convergence properties as these factors influence the accuracy of the results. Overall, this new version of the force method produces more accurate results than the stiffness method for comparable computational cost.

Patnaik, S. N.↗
NASA NTRS1991

Parallel computation in a three-dimensional elastic-plastic finite-element analysis

CRAY 2 and CRAY Y-MP evaluation runs are undertaken for a three-dimensional, elastoplastic FEM code implementation of the 'autotasking' parallel-processing technique, which is used in all code components except the matrix-equation solver. For a typical example problem in the case of a four-processor CRAY 2, a speedup factor of 2.1 was found achievable in a dedicated environment, and 1.7 in a multiuser environment; for a three-processor CRAY Y-MP, speedup in a multiuser environment was about 2.4. Only minimal effort was required to implement autotasking in this implementation code.

Shivakumar, K. N.↗
NASA NTRS1992

High-performance equation solvers and their impact on finite element analysis

The role of equation solvers in modern structural analysis software is described. Direct and iterative equation solvers which exploit vectorization on modern high-performance computer systems are described and compared. The direct solvers are two Cholesky factorization methods. The first method utilizes a novel variable-band data storage format to achieve very high computation rates and the second method uses a sparse data storage format designed to reduce the number od operations. The iterative solvers are preconditioned conjugate gradient methods. Two different preconditioners are included; the first uses a diagonal matrix storage scheme to achieve high computation rates and the second requires a sparse data storage scheme and converges to the solution in fewer iterations that the first. The impact of using all of the equation solvers in a common structural analysis software system is demonstrated by solving several representative structural analysis problems.

Poole, Eugene L.↗
NASA NTRS1991

A globally convergent matrix-free algorithm for implicit time-marching schemes arising in finite element analysis in fluids

A solution procedure for solving nonlinear time-marching problems is presented. The nonsymmetric systems of equations arising from a Newton-type linearization of these time-marching problems are solved using an iterative strategy based on the generalized minimal residual (GMRES) algorithm. Matrix-free techniques leading to reduction in storage are presented. Incorporation of a linesearch algorithm in the Newton-GMRES scheme is discussed. An automatic time-increment control strategy is developed to increase the stability of the time-marching process. High-speed flow computations demonstrate the effectiveness of these algorithms.

Johan, Zdenek↗
NASA NTRS1993

Finite-Element Analysis Of Geared Rotors

Rotor and gear dynamics, previously treated separately, combined in one model. Geared-rotor model developed to consider coupling of torsional vibrations of gears with lateral as well as torsional vibrations of shafts. Geared-rotor system includes motor connected to one of two shafts via coupling, load at far end of other shaft, and pair of gears that couple shafts. Used in parametric studies on effects of compliances of bearings on dynamics of geared-rotor systems.

Kahraman, Ahmet↗