Results for “Engineering Considerations” — Page 20

NASA NTRS2015

Correlation of Electrical Resistance to CMC Stress-Strain and Fracture Behavior Under High Heat-Flux Thermal and Stress Gradients

Because SiCSiC ceramic matrix composites (CMCs) are under consideration for use as turbine engine hot-section components in extreme environments, it becomes necessary to investigate their performance and damage morphologies under complex loading and environmental conditions. Monitoring of electrical resistance (ER) has been shown as an effective tool for detecting damage accumulation of woven melt-infiltrated SiCSiC CMCs. However, ER change under complicated thermo-mechanical loading is not well understood. In this study a systematic approach is taken to determine the capabilities of ER as a relevant non-destructive evaluation technique for high heat-flux testing, including thermal gradients and localized stress concentrations. Room temperature and high temperature, laser-based tensile tests were conducted in which stress-dependent damage locations were determined using modal acoustic emission (AE) monitoring and compared to full-field strain mapping using digital image correlation (DIC). This information is then compared with the results of in-situ ER monitoring, post-test ER inspection and fractography in order to correlate ER response to convoluted loading conditions and damage evolution.

electrical resistance↗

DOE OSTI2024

Biofuels as Heavy Fuel Oil Substitutes in the Maritime Sector: Findings and Potential Pathways

The United States Department of Energy has commissioned four national laboratories to evaluate the feasibility of biofuels in the maritime sector. This effort is briefly described including the overall project goals, structure and aims. The large two-stroke crosshead engines used to power large merchant vessels were of particular interest since they can burn lower combustion quality fuels relative to four-stroke engines. This characteristic allows for consideration of pyrolysis oils and hydrothermal liquefaction (HTL) oils which are feedstock agnostic and, in the raw state, are more economical compared to distillate drop-in fuels. Pyrolysis and HTL oils are collectively known as bio-intermediates since they require additional processing for use in distillate fuel systems. The key limiting feature is that these bio-intermediate fuels will cause asphaltene precipitation when blended with heavy fuel oils (HFOs) such as very low sulfur fuel oil (VLSFO) unless they are upgraded to remove water and oxygenates. Economics are the key driver at this point in time, and preliminary techno-economic analyses (TEAs) indicate that bio-intermediates have potentially lower cost relative to other biofuels such as biodiesel and renewable diesel. Additionally, life cycle analyses (LCAs) of feedstocks and pathways show the life cycle carbon reduction benefit relative to heavy fuel oils. In addition to TEA and LCA results, we also present on the technical feasibility of these fuels. These studies have focused on the properties of biofuel blends with VLSFO that are critical to the fuel systems of maritime vessels fueled with HFOs. These properties include the compatibility with fuel system metals, viscosity, and blend stability. Aging studies with blends of VLSFO with biodiesel, HTL, and pyrolysis oils are also presented. Future efforts being planned to conduct additional biofuel testing, including the use of biofuels as pilot fuels in zero carbon shipping options fueled with ammonia and methanol, ship-based demonstrations, and bioresource competition studies.

Kass, Michael↗

NASA NTRS1981

Propulsion system study for Small Transport Aircraft Technology (STAT)

Propulsion system technologies applicable to the generation of commuter airline aircraft expected to enter service in the 1990's are identified and evaluated in terms of their impact on aircraft operating economics and fuel consumption. The most promising technologies in the areas of engine, propeller, gearbox, and nacelle design are recommended for future research. Each item under consideration is evaluated relative to a modern baseline engine, the General Electric CT7-5, in a current technology aircraft flying a fixed range and payload. The analysis is presented for two aircraft sizes (30 and 50 passenger), over a range of mission lengths (100 to 1100 km) and fuel costs ($264 to $396 per cu m).

Smith, C. E.↗

NASA NTRSDate not supplied

Discovering Digital Engineering Needs Through Human-Centered Approaches

Digital engineering has the power to transform organizations in profound ways, but digitizing legacy workflows and infusing new technologies into existing practices may not yield the intended results or address the underlying problems or bottlenecks. This paper describes the human-centered approaches used to understand stakeholder challenges and identify digital engineering needs during the design-build-test portion of the systems development lifecycle. Through a series of interactive stakeholder workshops and need-finding activities, key stakeholder needs were identified to help guide the integration of digital engineering technologies. The overarching need was for downstream system development steps to be considered further upstream in the project lifecycle in a manner that allows for proactive and interactive co-constructive idea exploration, problem resolution, and requirements considerations in a collective engagement with engineers and technicians from multiple disciplines to increase efficiency and reduce risks while offering opportunities to improve the final engineered system. Supporting this need was a wide-ranging desire from stakeholders for digital and non-digital support structures for efficient rapid iteration during system development. This work yielded several improvements for system development processes and for digital engineering infusion.

Human-centered Design↗

NASA NTRSDate not supplied

Discovering Digital Engineering Needs Through Human-Centered Approaches

Digital engineering has the power to transform organizations in profound ways, but digitizing legacy workflows and infusing new technologies into existing practices may not yield the intended results or address the underlying problems or bottlenecks. This paper describes the human-centered approaches used to understand stakeholder challenges and identify digital engineering needs during the design-build-test portion of the systems development lifecycle. Through a series of interactive stakeholder workshops and need-finding activities, key stakeholder needs were identified to help guide the integration of digital engineering technologies. The overarching need was for downstream system development steps to be considered further upstream in the project lifecycle in a manner that allows for proactive and interactive co-constructive idea exploration, problem resolution, and requirements considerations in a collective engagement with engineers and technicians from multiple disciplines to increase efficiency and reduce risks while offering opportunities to improve the final engineered system. Supporting this need was a wide-ranging desire from stakeholders for digital and non-digital support structures for efficient rapid iteration during system development. This work yielded several improvements for system development processes and for digital engineering infusion.

Design Science↗

NASA NTRS2016

Approximation of Engine Casing Temperature Constraints for Casing Mounted Electronics

The performance of propulsion engine systems is sensitive to weight and volume considerations. This can severely constrain the configuration and complexity of the control system hardware. Distributed Engine Control technology is a response to these concerns by providing more flexibility in designing the control system, and by extension, more functionality leading to higher performing engine systems. Consequently, there can be a weight benefit to mounting modular electronic hardware on the engine core casing in a high temperature environment. This paper attempts to quantify the in-flight temperature constraints for engine casing mounted electronics. In addition, an attempt is made at studying heat soak back effects. The Commercial Modular Aero Propulsion System Simulation 40k (C-MAPSS40k) software is leveraged with real flight data as the inputs to the simulation. A two-dimensional (2-D) heat transfer model is integrated with the engine simulation to approximate the temperature along the length of the engine casing. This modification to the existing C-MAPSS40k software will provide tools and methodologies to develop a better understanding of the requirements for the embedded electronics hardware in future engine systems. Results of the simulations are presented and their implications on temperature constraints for engine casing mounted electronics is discussed.

Engine↗

NASA NTRS2017

Approximation of Engine Casing Temperature Constraints for Casing Mounted Electronics

The performance of propulsion engine systems is sensitive to weight and volume considerations. This can severely constrain the configuration and complexity of the control system hardware. Distributed Engine Control technology is a response to these concerns by providing more flexibility in designing the control system, and by extension, more functionality leading to higher performing engine systems. Consequently, there can be a weight benefit to mounting modular electronic hardware on the engine core casing in a high temperature environment. This paper attempts to quantify the in-flight temperature constraints for engine casing mounted electronics. In addition, an attempt is made at studying heat soak back effects. The Commercial Modular Aero Propulsion System Simulation 40k (C-MAPSS40k) software is leveraged with real flight data as the inputs to the simulation. A two-dimensional (2-D) heat transfer model is integrated with the engine simulation to approximate the temperature along the length of the engine casing. This modification to the existing C-MAPSS40k software will provide tools and methodologies to develop a better understanding of the requirements for the embedded electronics hardware in future engine systems. Results of the simulations are presented and their implications on temperature constraints for engine casing mounted electronics is discussed.

Engine↗

NASA NTRS2019

Overview of the Main Propulsion System for a Nuclear Thermal Propulsion Flight Demonstrator

A demonstration of a Nuclear Thermal Propulsion (NTP) engine has not been conducted in over 50 years. Several tests were conducted during the NERVA program but no NTP engine was ever flown in space. In the last several years there has been a considerable amount of conceptual design work on NTP engines conducted. With the prospect of human Mars missions in the 2030’s there has been a renewed interest in NTP engines. A concept design study was conducted with the intent to design 2 flight demonstrator vehicles that would buy down programmatic and technical risks associated with launching and operating nuclear reactors in space. The intent of the first demonstrator mission would be to employ a simplified NTP engine and buy down programmatic risks whereas the second demonstrator would buy down technical risks with a NTP engine designed to be similar to an operational NTP model. The results of the study showed that a simplified NTP engine demonstrator could be feasibly built and flown in the near term with mostly high TRL, commercial off-the-shelf components.

Simpson, S. P.↗

NASA NTRS1985

Testing Ceramics for Diesel Engines

Adaptation of diesel engine allows prestressed ceramic materials evaluated under realistic pressure, temperature, and stress without introducing extraneous stress. Ceramic specimen part of prechamber of research engine. Specimen held in place by clamp, introduces required axial compressive stress. Specimen -- cylindrical shell -- surrounded by chamber vented or pressurized to introduce requisite radial stress in ceramic. Pressure chamber also serves as safety shield in case speimen disintegrates. Materials under consideration as cylinder liners for diesel engines.

Schneider, H. W.↗

NASA NTRS1989

Conceptual arcjet system design considerations for the SP-100 mission

Conceptual spacecraft design considerations for using 30-kW class arcjet engines as an active load for a 100-kWe SP-100 space nuclear reactor power system flight experiment are discussed. These design considerations involve configuration trades; interfaces with power, attitude and velocity control, thermal management, orbit insertion and reaction control propulsion systems; imposed environments concerned with electromagnetic noise, survivability, and ammonia exhaust plumes; and associated diagnostic instrumentation.

Zafran, Sidney↗

NASA NTRS1929

The variation in engine power with altitude determined from measurements in flight with a hub dynamometer

The rate of change in power of aircraft engines with altitude has been the subject of considerable discussion. Only a small amount of data from direct measurements of the power delivered by airplane engines during flight, however, has been published. This report presents the results of direct measurements of the power delivered by a Liberty 12 airplane engine taken with a hub dynamometer at standard altitudes from zero to 13,000 feet. Six flights were made with the engine installed in a modified DH-4 airplane. The experimental relation of brake horsepower to altitude is compared with two theoretical relations and with the experimental results, for a second Liberty 12 engine, given in NACA Technical Report no. 252. The rate of change in power with altitude of a third Liberty engine, measured with a calibrated propeller, is also given for comparison. The data presented substantiate the theoretical relation of brake horsepower to altitude based on the correction of ground level indicated horsepower for change in atmospheric temperature and pressure with the subsequent deduction of friction horsepower corrected for altitude. (author)

Gove, W D↗

NASA NTRS1973

A cooled-gas pyrometer for use in hypersonic engine testing

A cooled-gas pyrometer designed for application in a hypersonic research engine program was fabricated and tested. Design and operational considerations and calibration data are presented. The probe was tested in a rocket-engine exhaust stream operating at Mach 2 and 2300 K. Test temperature measurements agreed to within 2 percent with a radiation shielded thermocouple probe.

Glawe, G. E.↗

NASA NTRS1976

Aerodynamic and acoustic performance of a contracting cowl high throat Mach number inlet installed on NASA quiet engine C

The approach and takeoff performance was evaluated of a contracting cowl variable geometry design inlet installed on a high-bypass-ratio turbofan engine. The design was finalized after consideration of aerodynamic, acoustic, and mechanical factors which would lead to a viable flight worthy concept. The aerodynamic results are presented in terms of inlet recovery and distortion parameter as functions of throat Mach number, and acoustic results in terms of Perceived Noise Level. The contracting cowl high throat Mach number inlet is shown to be an attractive means to reduce forward radiated noise from a high bypass ratio turbofan engine.

Blommer, H. E.↗

NASA NTRS1976

Aerodynamic and acoustic performance of a contracting cowl high throat Mach number inlet installed on NASA Quiet Engine 'C'

The purpose of this experimental program was to evaluate the approach and takeoff performance of a contracting cowl variable geometry design inlet installed on a high-bypass-ratio turbofan engine. The design was finalized after consideration of aerodynamic, acoustic, and mechanical factors which would lead to a viable flight-worthy inlet concept. The aerodynamic results are presented in terms of inlet recovery and distortion parameter as functions of throat Mach number, and acoustic results in terms of Perceived Noise Level. The contracting cowl high throat Mach number inlet is shown to be an attractive means to reduce forward radiated noise from a high bypass ratio turbofan engine.

Bloomer, H. E.↗

NASA NTRS1983

Considerations of technology transfer barriers in the modification of strategic superalloys for aircraft turbine engines

A typical innovation-to-commercialization process for the development of a new hot section gas turbine material requires one to two decades with attendant costs in the tens of millions of dollars. This transfer process is examined to determine the potential rate-controlling steps for introduction of future low strategic metal content alloys or processes. Case studies are used to highlight the barriers to commercialization as well as to identify the means by which these barriers can be surmounted. The opportunities for continuing joint government-university-industry partnerships in planning and conducting strategic materials R&D programs are also discussed.

Stephens, J. R.↗

NASA NTRS1948

Metallurgical Research Relating to the Development of Metals and Alloys for Use in the High-Temperature Components of Jet-Engines, Gas Turbines and Other Aircraft Propulsion Systems

Considerable work has been done on report preparation. All items listed in the March program report will be reported during July. Fundamental studies are in progress to establish the fundamental processes by which treatments and composition control properties of commercial alloys at high temperatures. As yet work has been confined to Low-Carbon N155 alloy and progress has been reported twice previously. The work is divided into two sections: studies of solution treated and aged material and studies of rolled structures. Electron microscopic work has been started as an additional technique for the studies. Brief descriptions of experimental techniques used, results, and interpretation of the data obtained since the last report covering this field are summarized below. Since the work outlined is to a large extent still in progress, the discussion given is to be considered tentative and subject to further modification as additional data becomes available.

Source record↗

NASA NTRS2017

Uncertainty Quantification of CFD Data Generated for a Model Scramjet Isolator Flowfield

Computational fluid dynamics is now considered to be an indispensable tool for the design and development of scramjet engine components. Unfortunately, the quantification of uncertainties is rarely addressed with anything other than sensitivity studies, so the degree of confidence associated with the numerical results remains exclusively with the subject matter expert that generated them. This practice must be replaced with a formal uncertainty quantification process for computational fluid dynamics to play an expanded role in the system design, development, and flight certification process. Given the limitations of current hypersonic ground test facilities, this expanded role is believed to be a requirement by some in the hypersonics community if scramjet engines are to be given serious consideration as a viable propulsion system. The present effort describes a simple, relatively low cost, nonintrusive approach to uncertainty quantification that includes the basic ingredients required to handle both aleatoric (random) and epistemic (lack of knowledge) sources of uncertainty. The nonintrusive nature of the approach allows the computational fluid dynamicist to perform the uncertainty quantification with the flow solver treated as a "black box". Moreover, a large fraction of the process can be automated, allowing the uncertainty assessment to be readily adapted into the engineering design and development workflow. In the present work, the approach is applied to a model scramjet isolator problem where the desire is to validate turbulence closure models in the presence of uncertainty. In this context, the relevant uncertainty sources are determined and accounted for to allow the analyst to delineate turbulence model-form errors from other sources of uncertainty associated with the simulation of the facility flow.

Baurle, R. A.↗

NASA NTRS1978

Future directions in aeronautical research and technology

The aeronautical R & D effort in NASA is discussed with emphasis on those areas where major needs and opportunities exist. In aerodynamics, areas selected for discussion include computational aerodynamics, transonic test techniques, high Reynolds number research, skin friction drag reduction, and propulsive lift. In propulsion, consideration is given to the areas of fuel-efficient subsonic propulsion, variable-flow engines, hypersonic propulsion, alternate fuels, and aircraft noise reduction. Consideration is also given to the utilization of advanced composites and integrated avionic systems.

Bower, R. E.↗