Search NASA⌕ Search

SEARCH · Search NASA

Results for “FERROELECTRICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Screening of hot electrons in the ferroelectric semiconductor In 2 Se 3

We report that in a conventional semiconductor, electrons (e) scatter efficiently with longitudinal-optical phonons (ph LO ) via the Fröhlich interaction, e.g., in polaron formation or hot-electron cooling. Recent studies on lead halide perovskites have suggested that the Fröhlich interaction may be sufficiently screened by the polar lattice. Here we show that hot-electron cooling in a layered ferroelectric semiconductor In 2 Se 3 slows down by 50% as temperature is increased from 115 to 387 K; this decrease is about four times more than that predicted by the Fröhlich model. We suggest that screening of Fröhlich interaction by polar domains or fluctuations in the ferroelectric semiconductor may be responsible for the reduced e-ph LO scattering. Such enhanced screening in polar materials featuring anharmonic lattice instability may also reduce carrier scattering with other charge carriers or with charged defects, leading to improved optoelectronic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Revealing pressure-driven structural transitions in the hybrid improper ferroelectric Sr 3 Sn 2 O 7

In this work, we combine diamond anvil cell techniques and synchrotron-based infrared spectroscopy with a detailed symmetry analysis and lattice dynamics calculations to uncover a series of pressure induced structural phase transitions in the hybrid improper ferroelectric Sr 3 Sn 2 O 7 . The microscopic character of each high pressure phase is determined by comparing the measured spectrum with the predicted vibrational patterns of several related but distinct candidate space groups. Our analysis reveals a sequence of compression-induced transitions from A2 1 am ↔ Pnab ↔ Acaa ↔ I4/mmm at room temperature. Remarkably, this space group progression matches the sequence of temperature-dependent structural transitions observed in Sr 3 Sn 2 O 7 between 77 and 1000 K. Other hybrid improper ferroelectrics display a similar set of transitions, suggesting that pressure and probably strain will be very effective tuning parameters for this entire class of materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Enhanced ferroelectric and piezoelectric properties of BCT-BZT at the morphotropic phase boundary driven by the coexistence of phases with different symmetries

The discovery of lead-free piezoelectric materials is crucial for future information and energy storage applications. Enhanced piezoelectric and other physical properties are commonly observed near the morphotropic phase boundary (MPB) composition of ferroelectric solid solutions. The (1 – x)Ba(Zr 0.2 Ti 0.8 )O 3 -x(Ba0.7Ca0.3)TiO 3 (BZT-xBCT) system exhibits a large electromechanical response around its MPB region at x = 0.5. Here, we report experimental and theoretical results of BZT-xBCT over a wide composition range (0.3 ≤ x ≤ 1.0). X-ray diffraction and Raman spectroscopy studies indicate a composition-induced structural phase transition from a rhombohedral (R3m) phase at x ≤ 0.4 to a tetragonal (P4mm) phase at x ≥ 0.6 through a multiphase coexistence region at 0.45 ≤ x ≤ 0.55 involving orthorhombic + tetragonal (Amm2 + P4mm) phases. First-principles calculations elucidate the phase competition in the coexistence region. The critical composition (x = 0.5) displays enhanced dielectric, ferroelectric, and piezoelectric properties, where notably d 33 ~ 320 pC/N. This paper provides clear evidence of Amm2+P4mm crystallographic phases in the MPB region, which is responsible for the improved functional properties.

MPB↗
DOE OSTI2021

Dynamic Tilting of Ferroelectric Domain Walls Caused by Optically Induced Electronic Screening

Optical excitation perturbs the balance of phenomena selecting the tilt orientation of domain walls within ferroelectric thin films. The high carrier density induced in a low-strain BaTiO3 thin film by an above-bandgap ultrafast optical pulse changes the tilt angle that 90° a/c domain walls form with respect to the substrate-film interface. The dynamics of the changes are apparent in time-resolved synchrotron x-ray scattering studies of the domain diffuse scattering. Tilting occurs at 298 K, a temperature at which the a/b and a/c domain phases coexist but is absent at 343 K in the better ordered single-phase a/c regime. Furthermore, phase coexistence at 298 K leads to increased domain-wall charge density, and thus a larger screening effect than in the single-phase regime. The screening mechanism points to new directions for the manipulation of nanoscale ferroelectricity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Assembly of Close–Packed Ferroelectric Polymer Nanowires via Interface–Epitaxy with ReS 2

The flexible, transparent, and low-weight nature of ferroelectric polymers makes them promising for wearable electronic and optical applications. To reach the full potential of the polarization-enabled device functionalities, large-scale fabrication of polymer thin films with well-controlled polar directions is called for, which remains a central challenge. The widely exploited Langmuir–Blodgett, spin-coating, and electrospinning methods only yield polymorphous or polycrystalline films, where the net polarization is compromised. Here, an easily scalable approach is reported to achieve poly(vinylidene fluoride-trifluoroethylene) P(VDF-TrFE) thin films composed of close-packed crystalline nanowires via interface-epitaxy with 1T'-ReS 2 . Upon controlled thermal treatment, uniform P(VDF-TrFE) films restructure into about 10 and 35 nm-wide (010)-oriented nanowires that are crystallographically aligned with the underlying ReS 2 , as revealed by high-resolution transmission electron microscopy. Piezoresponse force microscopy studies confirm the out-of-plane polar axis of the nanowire films and reveal coercive voltages as low as 0.1 V. Reversing the polarization can induce a conductance switching ratio of >10 8 in bilayer ReS 2 , over six orders of magnitude higher than that achieved by an untreated polymer gate. Lastly, this study points to a cost-effective route to large-scale processing of high-performance ferroelectric polymer thin films for flexible energy-efficient nanoelectronics.

crystalline nanowires↗
DOE OSTI2026

Decoding THz‐Driven Dynamic Fingerprints of Ferroelectric Nanotwin Networks

Ultrafast polarization dynamics in ferroelectrics are of considerable interest for high-speed tunable dielectrics and electro-optics. Extended domain wall networks formed in ferroelectric twin nanodomains can support collective dynamics in the terahertz regime but require techniques that track polarization and strain evolution driven by ultrafast stimulus. Here, we use multi-modal probing of THz-pulse-driven excitations in PbTiO 3 /SrTiO 3 superlattices by combining X-ray free electron laser measurements that directly tracks lattice changes, with optical second harmonic generation that tracks the electronic potential coupled with the lattice potential. Dynamical phase-field modeling enables fingerprinting of these collective modes as superpositions of domain “breathing” through wall oscillations and polarization “rotations” with still walls. Ultrafast domain wall motion at 0.1–0.5 THz is observed at practical fields of 100 kV/cm with wall velocities of >4000 m/s, approaching typical speed of sound in PbTiO 3 . A unique “charging” mode is discovered that can electrically charge and discharge domain walls on ∼4 ps time scale thus dynamically tuning wall conductivity. Integrated experimental and theoretical fingerprinting of the dynamical landscape presented here enables ultrafast control of ferroics for high-speed microelectronics and optical applications.

THz dynamics↗
DOE OSTI2023

Machine Learning Reveals Memory of the Parent Phases in Ferroelectric Relaxors Ba(Ti$_{1-x}$,Zr x )O 3

Machine learning has been establishing its potential in multiple areas of condensed matter physics and materials science. Here, in this work, an unsupervised machine learning workflow is developed and used within a framework of first-principles-based atomistic simulations to investigate phases, phase transitions, and their structural origins in ferroelectric relaxors, Ba(Ti 1-x ,Zr x )O 3 . The applicability of the workflow is first demonstrated to identify phases and phase transitions in the parent compound, a prototypical ferroelectric BaTiO 3 . Then the workflow is applied for Ba(Ti 1-x ,Zrx)O 3 with x ≤ 0.25 to reveal i) that some of the compounds bear a subtle memory of BaTiO 3 phases beyond the point of the pinched phase transition, which could contribute to their enhanced electromechanical response; ii) the existence of peculiar phases with delocalized precursors of nanodomains—likely candidates for the controversial polar nanoregions; and iii) nanodomain phases for the largest concentrations of x.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Probing Temperature‐Induced Phase Transitions at Individual Ferroelectric Domain Walls

Abstract Ferroelectric domain walls have emerged as one of the most fascinating objects in condensed matter physics due to the broad variability of functional behaviors they exhibit. However, the vast majority of domain walls studies have been focused on bias‐induced dynamics and transport behaviors. Here, the scanning probe microscopy approach based on piezoresponse force microscopy (PFM) with a dynamically heated probe, combining local heating and local biasing of the material is introduced. This approach is used to explore the thermal polarization dynamics in soft Sn 2 P 2 S 6 ferroelectrics, and allows for the exploration of phase transitions at individual domain walls. The strong and weak modulation regimes for the thermal PFM are introduced. The future potential applications of heated probe approach for functional SPM measurements including piezoelectric, elastic, microwave, and transport measurements are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Growth of Large‐Sized 2D Ultrathin SnSe Crystals with In‐Plane Ferroelectricity

Abstract Tin (II) selenide (SnSe) is an emerging 2D material with many intriguing properties, such as record‐high thermoelectric figure of merit (ZT), purely in‐plane ferroelectricity, and excellent nonlinear optical properties. To explore these functional properties and related applications, a crucial step is to develop controllable routes to synthesize large‐area, ultrathin, and high‐quality SnSe crystals. Physical vapor deposition (PVD) constitutes a reliable method to synthesize 2D SnSe, however, effects of various growth parameters have not yet been systematically investigated, and current PVD‐synthesized flakes are often thick (>10 nm) with small lateral sizes (<10 µm). In this work, high‐quality 2D SnSe crystals are synthesized via low‐pressure PVD, which display in‐plane ferroelectric domains observed by piezoresponse force microscopy and polarization‐dependent reflection spectroscopy. Detailed studies regarding the roles of various parameters are further carried out, including substrate pre‐annealing, growth duration, temperature, and pressure, which enable to rationally optimize the growth and obtain 2D SnSe crystals with lateral sizes up to ≈23.0 µm and thicknesses down to ≈2.0 nm (3–4 layers). This work paves the way for the controlled growth of large‐area 2D SnSe, facilitating the future exploration of many interesting multiferroic properties and applications with atomic thickness.

2D materials↗
DOE OSTI2021

Understanding Reproducibility of Sputter‐Deposited Metastable Ferroelectric Wurtzite Al 0.6 Sc 0.4 N Films Using In Situ Optical Emission Spectrometry

High‐Sc Al 1– x Sc x N thin films are of tremendous interest because of their attractive piezoelectric and ferroelectric properties, but overall film quality and reproducibility are widely reported to suffer as x increases. In this study, structural and electrical properties of metastable Al 0.6 Sc 0.4 N films are connected with plasma changes during film growth, identified via glow discharge optical emission spectroscopy (GD‐OES), and linked to the target mode changes. This in situ GD‐OES technique uses changes in the N 2 (I) intensity, correlated with DC bias hysteresis behavior of a Al 0.6 Sc 0.4 target in metallic and poisoned modes, to identify films that subsequently exhibit unacceptable structural and electrical performance. Two representative samples deposited under identical conditions but possessing distinct properties related to phases present in the films are focused on. Films sputtered under a poisoned target mode produce pure wurtzite ferroelectric Al 0.6 Sc 0.4 N with a reversible 80 μC cm −1 polarization and 3.1 MV cm −1 coercive field. When identical chamber settings are used but the process starts in metallic mode, a mixed wurtzite/rocksalt film is deposited which exhibits nanometer‐scale changes to the film microstructure and a nonferroelectric response. These results illustrate the utility of optical emission spectroscopy for tracking target mode fluctuations when fabricating metastable materials such as high‐Sc Al 1– x Sc x N films.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Q-POP-Thermo: A general-purpose thermodynamics solver for ferroelectric materials

We report that Q-POP-Thermo is a program designed to compute thermodynamic monodomain equilibrium states and their properties for ferroelectric single crystals and thin films based on the Landau-Ginzburg-Devonshire (LGD) Theory. Utilizing symbolic manipulation with the SymPy Library, the governing equations along with appropriate boundary conditions are solved for speedy minimization of the free energy of a crystal. Utilizing the popular Differential Evolution algorithm, with appropriate hybridization, multiple phase diagrams, such as the pressure-temperature phase diagram for bulk single crystals and the common strain-temperature phase diagram for monodomain thin-film systems can be readily generated. Furthermore, a variety of material properties of stable ferroelectric phases, including dielectric, piezoelectric, and electrocaloric properties, can simultaneously be calculated. Validation studies are presented for both thin-film and single crystal systems to test the effectiveness and capability of the open-source program.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Critical Role of Sc Substitution in Modulating Ferroelectricity in Multiferroic LuFeO 3

Understanding how individual dopants or substitutional atoms interact with host lattices enables us to manipulate, control, and improve the functionality of materials. However, because of the intimate coupling among various degrees of freedom in multiferroics, the atomic-scale influence of individual foreign atoms has remained elusive. Here, we unravel the critical roles of individual Sc substitutional atoms in modulating ferroelectricity at the atomic scale of typical multiferroics, Lu 1–x Sc x FeO 3 , by combining advanced microscopy and theoretical studies. Atomic variations in polar displacement of intriguing topological vortex domains stabilized by Sc substitution are directly correlated with Sc atom-mediated local chemical and electronic fluctuations. The local FeO 5 trimerization magnitude and Lu/Sc–O hybridization strength are found to be significantly reinforced by Sc, clarifying the origin of the strong dependence of improper ferroelectricity on Sc content. We find that this study could pave the way for correlating dopant-regulated atomic-scale local structures with global properties to engineer emergent functionalities of numerous chemically doped functional materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Light-Driven Ultrafast Polarization Manipulation in a Relaxor Ferroelectric

Relaxor ferroelectrics have been intensely studied for decades based on their unique electromechanical responses which arise from local structural heterogeneity involving polar nanoregions or domains. Here, we report first studies of the ultrafast dynamics and reconfigurability of the polarization in freestanding films of the prototypical relaxor 0.68PbMg 1/3 Nb 2/3 O 3 -0.32PbTiO 3 (PMN-0.32PT) by probing its atomic-scale response via femtosecond-resolution, electron-scattering approaches. By combining these structural measurements with dynamic phase-field simulations, we show that femtosecond light pulses drive a change in both the magnitude and direction of the polarization vector within polar nanodomains on few-picosecond time scales. This study defines new opportunities for dynamic reconfigurable control of the polarization in nanoscale relaxor ferroelectrics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Ferroelectric Ordering in Nanosized PbTiO 3

The insight into the three-dimensional configuration of ferroelectric ordering in ferroelectric nanomaterials is motivated by the application of the development of functional nanodevices and the structural designing. However, the atomic deciphering of the spatial distribution of ordered structure remains challenging for the limitation of dimension and probing techniques. Here, in this paper, a neutron pair distribution function (nPDF) was utilized to analyze the spontaneous polarization distribution of zero-dimensional PbTiO 3 nanoparticles in three dimensions, via the application of reverse Monte Carlo (RMC) modeling. The comprehensive identification with transmission electron microscopy verified the linear characteristics of polarization along the c-axis in the main body, while electric polarization distribution on the surface was enhanced abnormally. In addition, the correlation of dipole vectors extending to three unit cells below the surface is retained. This work shows an application of the micro/macroscale information to effectively decode the polarization structure of nanoferroelectrics, providing new views of designing nanoferroelectric devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Two-Dimensional Ferroelectric Altermagnets: From Model to Material Realization

Multiferroic altermagnets offer new opportunities for magnetoelectric coupling and electrically tunable spintronics. However, due to intrinsic symmetry conflicts between altermagnetism and ferroelectricity, achieving their coexistence, known as ferroelectric altermagnets (FEAM), remains an outstanding challenge, especially in two-dimensional (2D) systems. Here, we propose a universal, symmetry-based design principle for 2D FEAM, supported by tight-binding models and first-principles calculations. We show that lattice distortions can break spin equivalence and introduce the necessary rotation-related symmetry, enabling altermagnetism with electrically reversible spin splitting. Guided by this framework, we identify a family of 2D vanadium oxyhalides and sulfide halides as promising FEAM candidates. In these compounds, pseudo Jahn-Teller distortions and Peierls-like dimerization cooperatively establish the required symmetry conditions. Here, we further propose the magneto-optical Kerr effect as an experimental probe to confirm FEAM and its electric spin reversal. Furthermore, our findings provide a practical framework for 2D FEAM and advancing electrically controlled spintronic devices.

2D materials↗
DOE OSTI2025

Dendritic Computing with Multigate Ferroelectric Field-Effect Transistors

Although inspired by neuronal systems in the brain, artificial neural networks generally employ point-neurons, which offer computational complexity far less than that of their biological counterparts. Neurons have dendritic arbors that connect to different sets of synapses and offer local nonlinear accumulation – playing a pivotal role in processing and learning. Inspired by this, we propose a novel neuron design based on a multigate ferroelectric field-effect transistor that mimics dendrites. It leverages ferroelectric nonlinearity for local computations within dendritic branches while utilizing the transistor action to generate the neuronal output. The branched architecture enables smaller crossbar arrays in hardware integration, improving efficiency. Using an experimentally calibrated device-circuit-algorithm cosimulation framework, we demonstrate that networks incorporating our dendritic neurons achieve superior performance compared to much larger networks without dendrites (∼ 17× fewer trainable weight parameters). These findings suggest that dendritic hardware can significantly improve computational efficiency and learning capacity of neuromorphic systems optimized for edge applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

In Situ Observation of Ion Migration in a Ferroelectric Ionic Conductor Rb-KTP during Thermal Annealing

Ion exchange in Rb-doped KTiOPO 4 has facilitated significant advancements in ferroelectric domain engineering, yet understanding the underlying mechanisms remains in its infancy. We perform time-of-flight secondary ion mass spectrometry analysis on multiple periodically ion-exchanged and periodically poled Rb-doped KTiOPO 4 samples under different temperatures and annealing durations. The results are compared between annealing in air, which involved ex situ annealing before periodic poling, and vacuum annealing conducted in situ after periodic poling. The Rb + diffusion profile after periodic ion exchange forms a tooth-shaped pattern. We show that in situ annealing causes a surface pinning effect on the nonpolar face, limiting Rb + migration along the polar axis at the surface. Once the pinned layer is removed through milling, the underlying Rb + diffusion is distinctively different from the surface. Additionally, the rate of Rb + diffusion during in situ annealing is linear, while the periodic domain structures remain stable after annealing. These results contribute to understanding the ionic diffusion process in a ferroelectric ionic conductor and using ion exchange to tailor the linear and nonlinear properties of KTiOPO 4 .

36 MATERIALS SCIENCE↗
DOE OSTI2020

Room-Temperature Ferroelectric LiNb 6 Ba 5 Ti 4 O 30 Spinel Phase in a Nanocomposite Thin Film Form for Nonlinear Photonics

Tetragonal tungsten bronze (TTB) materials are one of the most promising classes of materials for ferroelectric and nonlinear optical devices, owing to their very unique noncentrosymmetric crystal structure. In this work, a new TTB phase of LiNb 6 Ba 5 Ti 4 O 30 (LNBTO) has been discovered and studied. A small amount of a secondary phase, LiTiO 2 (LTO), has been incorporated as nanopillars that are vertically embedded in the LNBTO matrix. The new multifunctional nanocomposite thin film presents exotic highly anisotropic microstructure and properties, e.g., strong ferroelectricity, high optical transparency, anisotropic dielectric function, and strong optical nonlinearity evidenced by the second harmonic generation results. An optical waveguide structure based on the stacks of α-Si on SiO 2 /LNBTO–LTO has been fabricated, exhibiting low optical dispersion with an optimized evanescent field staying in the LNBTO–LTO active layer. Lastly, this work highlights the combination of new TTB material designs and vertically aligned nanocomposite structures for further enhanced anisotropic and nonlinear properties.

36 MATERIALS SCIENCE↗