Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLUID FLOW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Localized arc filament plasma actuators for noise mitigation and mixing enhancement

A device for controlling fluid flow. The device includes an arc generator coupled to electrodes. The electrodes are placed adjacent a fluid flowpath such that upon being energized by the arc generator, an arc filament plasma adjacent the electrodes is formed. In turn, this plasma forms a localized high temperature, high pressure perturbation in the adjacent fluid flowpath. The perturbations can be arranged to produce vortices, such as streamwise vortices, in the flowing fluid to control mixing and noise in such flows. The electrodes can further be arranged within a conduit configured to contain the flowing fluid such that when energized in a particular frequency and sequence, can excite flow instabilities in the flowing fluid. The placement of the electrodes is such that they are unobtrusive relative to the fluid flowpath being controlled.

Samimy, Mohammad↗
NASA NTRS1988

Heat transfer by fluids in granulite metamorphism

The thermal role of fluids in granulite metamorphism was presented. It was shown that for granulites to be formed in the middle crust, heat must be advected by either magma or by volatile fluids, such as water or CO2. Models of channelized fluid flow indicate that there is little thermal difference between channelized and pervasive fluid flow, for the same total fluid flux, unless the channel spacing is of the same order or greater than the thickness of the layer through which the fluids flow. The volumes of volatile fluids required are very large and are only likely to be found associated with dehydration of a subducting slab, if volatile fluids are the sole heat source for granulite metamorphism.

Morgan, Paul↗
NASA NTRS2012

Safety drain system for fluid reservoir

A safety drain system includes a plurality of drain sections, each of which defines distinct fluid flow paths. At least a portion of the fluid flow paths commence at a side of the drain section that is in fluid communication with a reservoir's fluid. Each fluid flow path at the side communicating with the reservoir's fluid defines an opening having a smallest dimension not to exceed approximately one centimeter. The drain sections are distributed over at least one surface of the reservoir. A manifold is coupled to the drain sections.

England, John Dwight↗
NASA NTRS1978

A systems approach to theoretical fluid mechanics: Fundamentals

A preliminary application of the underlying principles of the investigator's general system theory to the description and analyses of the fluid flow system is presented. An attempt is made to establish practical models, or elements of the general fluid flow system from the point of view of the general system theory fundamental principles. Results obtained are applied to a simple experimental fluid flow system, as test case, with particular emphasis on the understanding of fluid flow instability, transition and turbulence.

Anyiwo, J. C.↗
NASA NTRS1971

Predicting vibrational failure of flexible ducting

Technique applies to liquid or gas transfer through flexible ducting and proves valuable in high velocity fluid flow cases. Fluid mechanism responsible for free bellows vibrational excitation also causes flexible hose oscillation. Static pressure stress influences flexible ducting fatigue life and is considered separately.

Henry, R. H.↗
NASA NTRS1989

Interpretation and modeling of the averaged equations for a fluid-solid flow

A self-consistent derivation of the conservation laws is given for flows of a fluid-solid mixture. A unified analytical framework for obtaining constitutive relations is provided. This analysis uses a control volume/control surface approach that is widely used in fluid mechanics. All terms in the governing equations and the constitutive relations are written in terms of the mass-weighted averages except solid concentration. It is believed that the mass-weighted average is the natural bridge between micromechanics and constitutive relations. The derived momentum equations contain terms that differ from all existing models except that of Prosperetti and Jones (1984). However, their assumptions are not needed here. Special attention is given to the solid phase pressure. The physical basis of the previously assumed form for this pressure (Givler 1987) becomes clear. A number of related phenomena are also discussed. These include the anti-diffusion and anisotropic normal stresses. The energy equations are also different from existing models.

Shen, Hayley H.↗
NASA NTRS2014

Arbitrary Shape Deformation in CFD Design

Sculptor(R) is a commercially available software tool, based on an Arbitrary Shape Design (ASD), which allows the user to perform shape optimization for computational fluid dynamics (CFD) design. The developed software tool provides important advances in the state-of-the-art of automatic CFD shape deformations and optimization software. CFD is an analysis tool that is used by engineering designers to help gain a greater understanding of the fluid flow phenomena involved in the components being designed. The next step in the engineering design process is to then modify, the design to improve the components' performance. This step has traditionally been performed manually via trial and error. Two major problems that have, in the past, hindered the development of an automated CFD shape optimization are (1) inadequate shape parameterization algorithms, and (2) inadequate algorithms for CFD grid modification. The ASD that has been developed as part of the Sculptor(R) software tool is a major advancement in solving these two issues. First, the ASD allows the CFD designer to freely create his own shape parameters, thereby eliminating the restriction of only being able to use the CAD model parameters. Then, the software performs a smooth volumetric deformation, which eliminates the extremely costly process of having to remesh the grid for every shape change (which is how this process had previously been achieved). Sculptor(R) can be used to optimize shapes for aerodynamic and structural design of spacecraft, aircraft, watercraft, ducts, and other objects that affect and are affected by flows of fluids and heat. Sculptor(R) makes it possible to perform, in real time, a design change that would manually take hours or days if remeshing were needed.

Landon, Mark↗
NASA NTRS2018

Electrohydrodynamic (EHD) Refrigerant Pump

An electrohydrodynamic (EHD) pump increases refrigerant flow rate and the resulting pressure in a vapor compression based cooling system for permitting reduced compressor sizes and power demands. The EHD pump disposes electrodes in a liquid path of the refrigerant flow, and increases fluid flow and resulting pressure by an induced liquid flow between a pair of asymmetric electrodes. Voltage applied to these electrodes results in a conduction pumping mechanism associated with heterocharge layers in the vicinity of the electrodes based on disassociation of a neutral electrolyte species in the refrigerant fluid and recombination of the generated ions. The induced flow draws the liquid due to a net fluid flow toward one of the electrodes based on the asymmetry of the electrode pair. Electrodes are disposed on an inner surface of a refrigerant vessel, in communication with an annular liquid film that forms around the inner circumference in two-phase fluid systems.

Yagoobi, Jamal S.↗
NASA NTRS1993

Improved in-flow acoustic sensor

An acoustic sensor for measuring acoustic waves contained in fluid flowing over the sensor is described. The acoustic sensor reduces any unwanted self-noise associated with the flowing fluid by providing a nose cone having proper aerodynamic properties and by positioning the diaphragm of a microphone of the sensor at a location where any unwanted noise is at a relatively low level. The nose cone has a rounded, blunt or even sharp tip, neither of which creates any major disturbances in the flowing fluid which it intercepts.

Allen, Christopher S.↗
NASA NTRS1995

In-Flow Acoustic Sensor

An acoustic sensor for measuring acoustic waves contained in fluid flow flowing over the sensor is introduced. The acoustic sensor reduces any unwanted self-noise associated with the flowing fluid by providing a nose cone having proper aerodynamic properties and by positioning the diaphragm of a microphone of the sensor at a location where any unwanted noise is at a relatively low level. The nose cone has a rounded, blunt or even sharp tip neither of which creates any major disturbances in the flowing fluid which it intercepts.

Allen, Christopher S.↗
NASA NTRS1994

An Overview of Unsteady Three-Dimensional Navier-Stokes Simulations of Multistage Turbomachinery Flows

Fluid dynamics of turbomachines are complicated by inherently three dimensional structures such as endwall boundary layers, hub corner separation bubbles and tip-leakage flows. In addition, the relative motion between rotors and stators causes unsteady aerodynamic interactions to occur between blade rows. It is necessary to understand the aerodynamics associated with these interactions in order to design turbomachines that are both light and compact as well as reliable and efficient. An unsteady, three-dimensional, thin-layer, Navier-Stokes zonal algorithm is used to investigate the unsteady aerodynamics of multi-stage turbines and compressors. Relative motion between rotors and stators is made possible by the use of systems of patched and overlaid grids. Time-averaged pressures and pressure envelopes have been computed for several two- and three-dimensional single- and multi-stage configurations. Flow visualizations and computed results are in good agreement with experimental data.

Gundy-Burlet, Karen L.↗
NASA NTRS1988

Continuum theories for fluid-particle flows: Some aspects of lift forces and turbulence

A general framework is outlined for the modeling of fluid particle flows. The momentum exchange between the constituents embodies both lift and drag forces, constitutive equations for which can be made explicit with reference to known single particle analysis. Relevant results for lift are reviewed, and invariant representations are posed. The fluid and particle velocities and the particle volume fraction are then decomposed into mean and fluctuating parts to characterize turbulent motions, and the equations of motion are averaged. In addition to the Reynolds stresses, further correlations between concentration and velocity fluctuations appear. These can be identified with turbulent transport processes such as eddy diffusion of the particles. When the drag force is dominant, the classical convection dispersion model for turbulent transport of particles is recovered. When other interaction forces enter, particle segregation effects can arise. This is illustrated qualitatively by consideration of turbulent channel flow with lift effects included.

Mctigue, David F.↗
NASA NTRS2000

Mechanisms for the Crystallization of ZBLAN

A number of research teams have observed that glass forming melts that are solidified in low-g exhibit enhanced glass formation. This project will examine one of these glasses, the heavy metal fluoride glass ZBLAN. A four year ground based research program has been approved to examine the crystallization of ZBLAN glasses with the purpose of testing a theory for the crystallization of ZBLAN glass. The theory could explain the general observations of enhanced glass formation of other glasses melted and solidified in low-g. Fluid flow in 1-g results from buoyancy forces and surface tension driven convection. This fluid flow can introduce shear in undercooled liquids in 1-g. In low-g it is known that fluid flows are greatly reduced so that the shear rate in fluids in low-g are extremely low. It is believed that fluids may have some weak structure in the absence of flow. Even very small shear rates could cause this structure to collapse in response to the shear. A general result would be shear thinning of the fluid. The hypothesis of this research is that: Shear thinning in undercooled liquids increases the rate of nucleation and crystallization of glass forming melts. Shear of the melt can be reduced in low-g enhancing undercooling and glass formation. Samples will be melted and quenched in 1-g under quiescent conditions at a number of controlled cooling rates to determine times and temperatures of crystallization and heated at controlled heating rates to determine kinetic crystallization parameters. Experiments will also be performed on the materials while under controlled vibration conditions and compared with the quiescent experiments in order to evaluate the effect of shear in the liquid on crystallization kinetics. After the experimental parameters are well known, experiments will be repeated under low-g (and 2-g) conditions on the KC-135 aircraft during low-g parabolic maneuvers. The results will determine the effects of shear on crystallization. Our experimental setups will be designed with low-g experiments in mind and will be tested as breadboard low-g experiments. It is very likely that the thermal analysis instrumentation can be adapted to be run in the microgravity glovebox facilities. Critical space experiments may result to test the theory at longer low-g time experiments in space.

Ethridge, Edwin C.↗
NASA NTRS1991

The interaction of superfluid vortex filaments with a normal fluid channel flow

Vortex filaments in superfluids such as helium 2 may provide new insights into very high Reynolds number flows. The behavior of a superfluid vortex ring interacting with a normal fluid shear flow, specifically channel flow, is simulated. The vortex ring evolves into a stable horseshoe configuration which propagates without further change of form. In this simulation, a boundary layer behavior in a superfluid through the coupling of the superfluid and the normal fluid is demonstrated.

Samuels, David C.↗