Search NASA⌕ Search

SEARCH · Search NASA

Results for “Floating wind”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Mechanisms of Low-Level Jet Formation in the U.S. Mid-Atlantic Offshore

Low level jets (LLJs) in the atmosphere exhibit a local windspeed maximum inthe boundary layer and are commonly observed both over land and in coastal environments. Because LLJs present strong positive shear beneath the maximum (or "jet nose") and negative shear above the nose, they pose a challenge to future offshore wind technology through their impacts on turbine performance and wakes. Summertime LLJs in the Great Plains have been attributed to frictional decoupling triggering an inertial oscillation, whilecoastal LLJs in California or the North Sea have additional driving mechanisms such as baroclinic forcing. By comparison, LLJs in the coastal US Mid-Atlantic have received less attention, with conflicting evidence about the mechanism that triggers these high shear events. Motivated by future wind energy development in the region, this work elucidates the atmospheric mechanisms of LLJ formation in the US Mid-Atlantic. Using observational data from two floating LiDAR buoys deployed bythe New York State Energy Research and Development Authority in the NY Bight, we identify four sustained LLJ events whose windspeeds and directions are well predicted by a WRF simulation (Weather Research and Forecasting Model). From analysis of the WRF data, we find that the four case studies provide evidence of concurrent inertial oscillation, reduced vertical mixing, and baroclinicity. In addition, we use simple atmospheric dynamics and a single-column-model to compare the relative contribution of each of these mechanisms to triggering the LLJ. By improving understanding and predictability of coastal mid-Atlantic LLJs, this work reduces uncertaintiesof wind energy deployment in the region, aiding the US's transition toward renewable energy.

atmospheric boundary layers↗
NASA NTRS1978

Ground distance covered during airborne horizontal deceleration of an airplane

The distance an airplane floats with respect to the ground during deceleration at constant altitude is analyzed taking into account the effects of a constant wind. By use of suitable nondimensionalizing parameters, data applicable to all airplanes are presented by means of a single family of curves.

Phillips, W. H.↗
DOE OSTI2020

Enhanced Performance of Dual Inverter with a Floating Capacitor for Motor Drive Applications

This paper studies a dual inverter supplied by a DC-link and a floating capacitor (FC), emerged as a promising inverter topology for motor drive applications. For this type of inverter, the voltage ratio between the DC-link and the FC can be actively controlled. This ratio design is crucial as it essentially defines both the DC-link voltage utilization and the inverter output quality. Several voltage ratios have previously been discussed to enhance the dual inverter performance, but only one aspect, either the voltage utilization or the output quality, is investigated. As a result, although one performance aspect can be improved, the other aspect has been adversely affected. In this work, a comparative study considering both aspects is carried out for all the possible voltage ratios. Based on this analysis, the optimal ratios for different inverter modulation indices are identified. This is followed by proposing a ratio selection strategy to double the voltage utilization without degrading the output quality. Furthermore, this strategy enables an electric drive to work at a higher maximum speed without flux weakening for a given DC-link voltage. The claimed advantages have been proved by experimental tests on an open-end windings induction motor drive.

42 ENGINEERING↗
DOE OSTI2024

Offshore Wind Composite Siting Exclusions Scenarios

This dataset consolidates criteria that restrict the siting of offshore wind energy installations, an update from Zuckerman et al. (2023). All scenarios exclude area from wind energy development due to legal or administrative restrictions (e.g., Marine Protected Areas), existing infrastructure, and technical constraints (e.g., 1,300 m bathymetry limit). A TIF data file and a PNG cartographic map of the data are provided for three scenarios ("Open", "Reference", and "Limited"), showing areas where offshore wind energy is restricted across the contiguous United States. The "Open" scenario only excludes areas with known preclusions for offshore wind deployment. The "Reference" scenario excludes all areas from the "Open" scenario, as well as additional best management practices such as known proposed protected areas, and state waters. The "Limited" scenario excludes all area from the "Reference" scenario. Additionally, it has more stringent siting criteria such as larger setbacks from shore and infrastructure, as well as shallower depth limits on floating technology. For further details and citation, please refer to the publication linked below: Zuckerman, Gabriel R., Anthony Lopez, Travis Williams, Rebecca Green, and Grant Buster. 2023. Impacts of Siting Considerations on Offshore Wind Technical Potential in the United States. Golden, CO: National Renewable Energy Laboratory. NREL/TP-6A20- 85088.

Array↗
NASA NTRS1986

Overview of VEGA Venus balloon in situ meteorological measurements

The VEGA balloons made in situ measurements of pressure, temperature, vertical wind velocity, ambient light, frequency of lightning, and cloud particle backscatter. Both balloons encountered highly variable atmospheric conditions, with periods of intense vertical winds occurring sporadically throughout their flights. Downward winds as large as 3.5 meters per second occasionally forced the balloons to descend as much as 2.5 kilometers below their equilibrium float altitudes. Large variations in pressure, temperature, ambient light level, and cloud particle backscatter (VEGA-1 only) correlated well during these excursions, indicating that these properties were strong functions of altitude in those parts of the middle cloud layer sampled by the balloons.

Sagdeev, R. Z.↗
DOE OSTI2024

Definition of the IEA Wind 22-Megawatt Offshore Reference Wind Turbine

This technical report describes the design of a new 22 Megawatt reference wind turbine (RWT). The turbine model was designed collaboratively by two teams at the Denmark Technical University and at the National Renewable Energy Laboratory within the International Energy Agency (IEA) Wind Technology Commercialization Programme (TCP) Task 55 on Reference Wind Turbines and Farms. RWTs serve an important purpose in the wind energy community, since they provide openly available data for models representative of current wind turbine technology, which can be used by practitioners for a variety of modeling purposes, ranging from aerodynamic, structural, and aeroelastic turbine modeling to wind farm flow modeling, across a range of fidelities. The IEA 22 RWT aims to model machines with projected installation in the 2025-2030 time frame. The turbine has a rotor diameter of 284 meters and a hub height of 170 meters. It is a class 1-B machine with a rotor specific power nearing 350 W m -2 and it is mounted on either a fixed-bottom offshore foundation or a semi-submersible floating platform.

17 WIND ENERGY↗
DOE OSTI2022

Wind turbine drivetrains: state-of-the-art technologies and future development trends

Abstract. This paper presents the state-of-the-art technologies and development trends of wind turbine drivetrains – the system that converts kinetic energy of the wind to electrical energy – in different stages of their life cycle: design, manufacturing, installation, operation, lifetime extension, decommissioning and recycling. Offshore development and digitalization are also a focal point in this study. Drivetrain in this context includes the whole power conversion system: main bearing, shafts, gearbox, generator and power converter. The main aim of this article is to review the drivetrain technology development as well as to identify future challenges and research gaps. The main challenges in drivetrain research identified in this paper include drivetrain dynamic responses in large or floating turbines, aerodynamic and farm control effects, use of rare-earth material in generators, improving reliability through prognostics, and use of advances in digitalization. These challenges illustrate the multidisciplinary aspect of wind turbine drivetrains, which emphasizes the need for more interdisciplinary research and collaboration.

17 WIND ENERGY↗
DOE OSTI2020

Preliminary Introduction of a Free Vortex Wake Method Into OpenFAST

Increasing wind turbine size can have substantial economic benefits. However, increasing wind turbine turbine size requires the use of models that accurately capture the aerodynamic response to large deflections and nonstraight blade geometries. Additionally, the installation of offshore floating turbines requires turbine models that can handle large rotor motion. Free vortex wake (FVW) methods are capable of modeling this type of complex physics while remaining computationally tractable to perform the many simulations necessary for turbine design. In this work, a FVW model is added to the National Renewable Energy Laboratory engineering tool OpenFAST to allow for the aerodynamic modeling of highly flexible turbines along with the aero-hydro-servo-elastic response capabilities of OpenFAST. Code implementation is not complete and thus no results are presented. However, areas of potential modeling improvement are discussed, such as modifications to the circulation calculation and the need for different FVW input model specifications when high-thrust cases are being modeled.

17 WIND ENERGY↗
DOE OSTI2021

Google/Makani Energy Kite Modeling (CRADA CRD-18-00569 Final Report)

In support of Makani’s energy kite development program, Makani engaged with NREL to develop, verify, and document a multiphysics engineering model of a megawatt-scale tethered energy kite (named KiteFAST). After the original development of KiteFAST was completed, Makani further engaged NREL to develop a software enhancement of KiteFAST to enable the dynamics modeling of an energy kite tethered to a floating offshore platform (named KiteFAST-OS). Before this project, the capability to model the aero-hydro-servo-elastic dynamics of an airborne wind energy (AWE) system with electricity generation on the flying device (fly gen) and crosswind flight operation did not exist. Such physics-based modeling capability is needed for loads analysis, structural design, and certification of energy kites. Throughout the project, an exclusive license kept KiteFAST and KiteFAST-OS available only to Makani, NREL, and its counterparts. With the ending of Makani, the KiteFAST and KiteFAST-OS software were merged into a single code base (named KiteFAST), the exclusive license was terminated, and the source code, documentation, and example models were released publicly.

17 WIND ENERGY↗
NASA NTRS2014

Investigation of Backside Textures for Genesis Solar Wind Silicon Collectors

Genesis solar wind collectors were comprised of a suite of 15 types of ultrapure materials. The single crystal, pure silicon collectors were fabricated by two methods: float zone (FZ) and Czochralski (CZ). Because of slight differences in bulk purity and surface cleanliness among the fabrication processes and the specific vendor, it is desirable to know which variety of silicon and identity of vendor, so that appropriate reference materials can be used. The Czochralski method results in a bulk composition with slightly higher oxygen, for example. The CZ silicon array wafers that were Genesis-flown were purchased from MEMC Electronics. Most of the Genesis-flown FZ silicon was purchased from Unisil and cleaned by MEMC, although a few FZ wafers were acquired from International Wafer Service (IWS).

Gonzalez, C. P.↗
DOE OSTI2022

Use of a Compliant Tether to Decouple Observation Buoy Motion for Auxiliary Wave Power

With the growth of the Blue Economy, the volume of data collection within the ocean environment has been rapidly increasing. Larger numbers of oceanographic, meteorological, and floating Light Detection And Ranging (LiDAR) buoys have been collecting high fidelity measurements while pushing against power budget limits. Power limitations lead to infrequent transmission of reduced data sets or recording data to local storage that must be physically collected when the buoy is serviced. Triton Systems, Inc. and its partners are developing a retrofittable wave energy converter (WEC) to provide auxiliary power to these observation buoys to increase mission duration and power budget, improve reliability, and reduce the need for service trips. One of the greatest challenges has been developing a method to interface Triton's WEC with these buoys without impacting measurement fidelity. This is especially critical for inertial wave and LiDAR wind measurements collected with sensors that could be adversely affected by additional buoy dynamics introduced by an integrated WEC. To address this, Triton and EOM Offshore developed a compliant tether to pair an observation buoy with a floating WEC while decoupling relative motion. Based on EOM's proven stretch hose technology, this compliant tether transmits power and data between the buoy-WEC system. In conclusion, modeling shows that the system has the potential to minimally adversely affect oceanographic, meteorological, wind resource characterization, and other measurements, with future testing scheduled to validate modeling efforts.

16 TIDAL AND WAVE POWER↗
DOE OSTI2023

Beyond 15 MW: A cost of energy perspective on the next generation of drivetrain technologies for offshore wind turbines

Leading wind turbine manufacturers are racing to build larger and more powerful offshore machines. Drivetrain configurations often use a permanent-magnet synchronous generator (PMSG), in either a direct-drive configuration or coupled to a gearbox. With increasing demand for critical rare-earth magnets, new generator technologies are emerging to ensure a stable and secure supply chain. We evaluate three different topologies of radial flux synchronous generators employing high field magnets with reduced or no rare-earth content: a direct-drive interior PMSG (DD-IPMSG), a geared drivetrain combining a medium speed gearbox with a PMSG (MS-PMSG), and a direct-drive low-temperature superconducting generator (DD-LTSG). We develop a conceptual design module for each of these technologies within a larger framework for full turbine design. This provides the fairest comparison between technologies at nominal power ratings from 15-25 MW, which represent the next generation of offshore wind turbines. The analyses show that if operational expenditures (OpEx) are constant across the technologies, MS-PMSG results in the lowest LCOE with reductions of up to 7% relative to DD-IPMSG. DD-LTSG also yields lower LCOE values by 2%-3% for fixed-bottom turbines and 3%-5% with a floating platform. However, results are sensitive to OpEx assumptions, with a mere 10% increase causing the conclusions to shift.

17 WIND ENERGY↗
DOE OSTI2020

Simulating the Trajectory and Biomass Growth of Free-Floating Macroalgal Cultivation Platforms along the U.S. West Coast

Trajectory tracking and macroalgal growth models were coupled to support a novel macroalgae-harvesting concept known as the Nautical Off-shore Macroalgal Autonomous Device (NOMAD). The NOMAD consists of 5 km long carbon-fiber longlines that are seeded and free float southward along the U.S. West Coast for approximately 3 months before harvesting off the California coast, taking advantage of favorable environmental conditions. The trajectory and macroalgal growth models were applied to answer planning questions pertinent to the techno-economic analysis such as identifying the preferred release location, approximate pathway, timing until harvest, and estimated growth. Trajectories were determined with the General NOAA Operational Modeling Environment (GNOME) model, using 11 years of current and wind data, determining probabilities by running nearly 40,000 Monte Carlo simulations varying the start time and location. An accompanying macroalgal growth model was used to estimate the growth of macroalgae based on the trajectory tracks and environmental forcing products, including light, temperature and nutrients. Model results show that NOMAD lines transit south in the months of April to September due to seasonal currents, taking approximately 3 months to reach Southern California. During transit, NOMAD lines are dispersed but typically avoid beaching or passing through marine sanctuaries. NOMAD lines can yield up to 30 kg wet weight per meter of cultivation line.

09 BIOMASS FUELS↗
DOE OSTI2024

Considerations for Offshore-Wind-to-Hydrogen Systems in the United States

This presentation investigates the complexities involved in designing and siting offshore wind-to-hydrogen plants across the United States. It examines the integration of offshore wind farms with electrolysis facilities to produce green hydrogen, highlighting the technical, region-specific characteristics, and economic factors that influence project feasibility and success. The study presents four representative regions around the United States, two fixed-bottom locations and two floating locations: the New York Bight, Gulf of Mexico, Gulf of Maine and off the northern coast of California. Additionally, it assesses two energy transmission configurations - centralized onshore and offshore electrolysis - for the years 2025, 2030, and 2035.

ENERGY PLANNING, POLICY, AND ECONOMY,HYDROGEN,WIND↗
NASA NTRS2006

Molecular Substrate Alteration by Solar Wind Radiation Documented on Flown Genesis Mission Array Materials

The Genesis spacecraft sampling arrays were exposed to various regimes of solar wind during flight that included: 313.01 days of high-speed wind from coronal holes, 335.19 days of low-speed inter-stream wind, 191.79 days of coronal mass ejections, and 852.83 days of bulk solar wind at Lagrange 1 orbit. Ellipsometry measurements taken at NASA s Johnson Space Center show that all nine flown array materials from the four Genesis regimes have been altered by solar wind exposure during flight. These measurements show significant changes in the optical constant for all nine ultra-pure materials that flew on Genesis when compared with their non-flight material standard. This change in the optical constant (n and k) of the material suggests that the molecular structure of the all nine ultra-pure materials have been altered by solar radiation. In addition, 50 samples of float-zone and czochralski silicon bulk array ellipsometry results were modeled with an effective medium approximation layer (EMA substrate layer) revealing a solar radiation molecular damage zone depth below the SiO2 native oxide layer ranging from 392 to 613 . This bulk solar wind radiation penetration depth is comparable to the depth of solar wind implantation depth of Mg measured by SIMS and SARISA.

Calaway, Michael J.↗
NASA NTRS1947

Wind-Tunnel Tests of the 1/25-Scale Powered Model of the Martin JRM-1 Airplane. IV - Tests with Ground Board and with Modified Wing and Hull - TED No. NACA 232: Tests with Ground Board and with Modified Wing and Hull, TED No. NACA 232 - Part 4

Wind-tunnel tests were made of a 1/25 scale model of the Martin JRM-1 airplane to determine: (1) The longitudinal stability and control characteristics of the JRM-1 model near the water and lateral and directional stability characteristics with power while moving on the surface of the water, the latter being useful for the design of tip floats; (2) The stability and stalling characteristics of the wing with a modified airfoil contour; (3) Stability characteristics of a hull of larger design gross weight; The test results indicated that the elevator was powerful enough to trim the original model in a landing configuration at any lift coefficient within the specified range of centers of gravity. The ground-board tests for evaluating the aerodynamic forces and moments on an airplane in a simulated cross wind indicate a high dihedral effect in the presence of the ground board and, consequently, during low-speed taxying and take-off, large overturning moments would result which would have to be overcome by the tip floats.

Lockwood, Vernard E.↗
DOE OSTI2024

Mechanisms of Low-Level Jet Formation in the U.S. Mid-Atlantic Offshore

Abstract Low-level jets (LLJs), in which the wind speed attains a local maximum at low altitudes, have been found to occur in the U.S. mid-Atlantic offshore, a region of active wind energy deployment as of 2023. In contrast to widely studied regions such as the U.S. southern Great Plains and the California coastline, the mechanisms that underlie LLJs in the U.S. mid-Atlantic are poorly understood. This work analyzes floating lidar data from buoys deployed in the New York Bight to understand the characteristics and causes of coastal LLJs in the region. Application of the Hilbert–Huang transform, a frequency analysis technique, to LLJ case studies reveals that mid-Atlantic jets frequently occur during times of adjustment in synoptic-scale motions, such as large-scale temperature and pressure gradients or frontal passages, and that they do not coincide with motions at the native inertial oscillation frequency. Subsequent analysis with theoretical models of inertial oscillation and thermal winds further reveals that these jets can form in the stationary geostrophic wind profile from horizontal temperature gradients alone—in contrast to canonical LLJs, which arise from low-level inertial motions. Here, inertial oscillation can further modulate the intensity and altitude of the wind speed maximum. Statistical evidence indicates that these oscillations arise from stable stratification and the associated frictional decoupling due to warmer air flowing over a cold sea surface during the springtime land–sea breeze. These results improve our conceptual understanding of mid-Atlantic jets and may be used to better predict low-level wind speed maxima. Significance Statement The purpose of this work is to identify and characterize the atmospheric mechanisms that result in an occasional low-level maximum in the wind speed off the U.S. mid-Atlantic coastline. Our findings show that these low-level jets form due to horizontal temperature gradients arising from fronts and synoptic systems, as well as from the land–sea breeze that forces warmer air over the cold ocean surface. This work aids predictability of such jets, improves our understanding of this coastal environment, and has implications for future deployment of offshore wind energy in this region.

17 WIND ENERGY↗