Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fourier Transform Spectrometer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

60 Kelvin Absorption Cell for Planetary Spectroscopic Research

We will describe a 30 cm long absorption cell which has been in operation for about two years. The cell is designed for use with sensitive-wide-spectral-coverage Fourier transform spectrometers. A helium compressor refrigerator allows temperatures to be achieved down to about 57 K. Heaters allow above-ambient temperatures as well. A unique vibration isolation system effectively quenches the transfer of vibration of the compressor unit to the spectrometer. An acid-resistant stainless steel liner in the copper body of the call permits the use of corrosive gases.

Chackerian, Charles, Jr.↗

Long-term Doppler Shift and Line Profile Studies of Planetary Search Target Stars

This grant supported attempts to develop a method for measuring the Doppler shifts of solar-type stars more accurately. The expense of future space borne telescopes to search for solar systems like our own makes it worth trying to improve the relatively inexpensive pre-flight reconnaissance by ground-based telescopes. The concepts developed under this grant contributed to the groundwork for such improvements. They were focused on how to distinguish between extrasolar planets and stellar activity (convection) cycles. To measure the Doppler shift (radial velocity; RV) of the center of mass of a star in the presence of changing convection in the star's photosphere, one can either measure the effect of convection separately from that of the star's motion and subtract its contribution to the apparent RV, or measure the RV in a way that is insensitive to convection. This grant supported investigations into both of these approaches. We explored the use of a Fabry-Perot Etalon HE interferometer and a multichannel Fourier Transform Spectrometer (mFTS), and finished making a 1.8-m telescope operational and potentially available for this work.

McMillan, Robert S.↗

Modeled and Empirical Approaches for Retrieving Columnar Water Vapor from Solar Transmittance Measurements in the 0.72, 0.82, and 0.94 Micrometer Absorption Bands

A Sun photometer (18 channels between 300 and 1024 nm) has been used for measuring the columnar content of atmospheric water vapor (CWV) by solar transmittance measurements in absorption bands with channels centered at 719, 817, and 946 nm. The observable is the band-weighted transmittance function defined by the spectral absorption of water vapor and the spectral features of solar irradiance and system response. The transmittance function is approximated by a three-parameter model. Its parameters are determined from MODTRAN and LBLRTM simulations or empirical approaches using CWV data of a dual-channel microwave radiometer (MWR) or a Fourier transform spectrometer (FTS). Data acquired over a 2-year period during 1996-1998 at two different sites in Switzerland, Bern (560 m above sea level (asl)) and Jungfraujoch (3580 m asl) were compared to MWR, radiosonde (RS), and FTS retrievals. At the low-altitude station with an average CWV amount of 15 mm the LBLRTM approach (based on recently corrected line intensities) leads to negligible biases at 719 and 946 nm if compared to an average of MWR, RS, and GPS retrievals. However, at 817 nm an overestimate of 2.7 to 4.3 mm (18-29%) remains. At the high-altitude station with an average CWV amount of 1.4 mm the LBLRTM approaches overestimate the CWV by 1.0, 1.4. and 0.1 mm (58, 76, and 3%) at 719, 817, and 946 nm, compared to the ITS instrument. At the low-altitude station, CWV estimates, based on empirical approaches, agree with the MWR within 0.4 mm (2.5% of the mean); at the high-altitude site with a factor of 10 less water vapor the agreement of the sun photometers (SPM) with the ITS is 0.0 to 0.2 mm (1 to 9% of the mean CWV there). Sensitivity analyses show that for the conditions met at the two stations with CWV ranging from 0.2 to 30 mm, the retrieval errors are smallest if the 946 nm channel is used.

Ingold, T.↗

ISO Guest Observer Data Analysis and LWS Instrument Team Activities

This project was granted a no-cost extension prompted by the request of the major subcontractor, the Naval Research Laboratory, which had not yet completed its tasks. As of July 2002, they had made substantial progress. They have successfully fabricated a metal mesh grid on polyimide, and also successfully fabricated a 2-layer metal mesh infrared filter using stacks of these metal mesh grids on polyimide; the actual layering was done at SAO. Both warm and cold spectroscopic tests were done on these fabricated devices. The measurements were in good agreement with the theory, and also reasonable performance in absolute terms. NRL is now working on fabricating a 3-layer metal mesh infrared filter, and a prototype is expected in the next month. Testing should occur before the end of the fiscal year. Finally, NRL has preliminarily agreed to hire a new postdoctoral person to refine the modeling of the filters based on the new measurements. The person should arrive this fall. NRL has a new Fourier Transform Spectrometer which will be delivered in the next month, and which will be used to facilitate the testing which has up to now been done in collaboration with NASA Goddard Space Flight Space Center.

Smith, Howard↗

Absolute Rovibrational Intensities for the Chi(sup 1)Sigma(sup +) v=3 <-- 0 Band of (12)C(16)O Obtained with Kitt Peak and BOMEM FTS Instruments

This work was initiated to compare absolute line intensities retrieved with the Kitt Peak FTS (Fourier Transform Spectrometer) and Ames BOMEM FTS. Since thermal contaminations can be a problem using the BOMEM instrument if proper precautions are not taken it was thought that measurements done at 6300 per cm would more easily result in satisfactory intercomparisons. Very recent measurements of the CO 3 <-- 0 band fine intensities confirms results reported here that the intensities listed in HITRAN (High Resolution Molecular Absorption Database) for this band are on the order of six to seven percent too low. All of the infrared intensities in the current HITRAN tabulation are based on the electric dipole moment function reported fifteen years ago. The latter in turn was partly based on intensities for the 3 <-- 0 band reported thirty years ago. We have, therefore, redetermined the electric dipole moment function of ground electronic state CO.

Chackerian, Charles, Jr.↗

Preliminary Design and Analysis of the GIFTS Instrument Pointing System

The Geosynchronous Imaging Fourier Transform Spectrometer (GIFTS) Instrument is the next generation spectrometer for remote sensing weather satellites. The GIFTS instrument will be used to perform scans of the Earth s atmosphere by assembling a series of field-of- views (FOV) into a larger pattern. Realization of this process is achieved by step scanning the instrument FOV in a contiguous fashion across any desired portion of the visible Earth. A 2.3 arc second pointing stability, with respect to the scanning instrument, must be maintained for the duration of the FOV scan. A star tracker producing attitude data at 100 Hz rate will be used by the autonomous pointing algorithm to precisely track target FOV s on the surface of the Earth. The main objective is to validate the pointing algorithm in the presence of spacecraft disturbances and determine acceptable disturbance limits from expected noise sources. Proof of concept validation of the pointing system algorithm is carried out with a full system simulation developed using Matlab Simulink. Models for the following components function within the full system simulation: inertial reference unit (IRU), attitude control system (ACS), reaction wheels, star tracker, and mirror controller. With the spacecraft orbital position and attitude maintained to within specified limits the pointing algorithm receives quaternion, ephemeris, and initialization data that are used to construct the required mirror pointing commands at a 100 Hz rate. This comprehensive simulation will also aid in obtaining a thorough understanding of spacecraft disturbances and other sources of pointing system errors. Parameter sensitivity studies and disturbance analysis will be used to obtain limits of operability for the GIFTS instrument. The culmination of this simulation development and analysis will be used to validate the specified performance requirements outlined for this instrument.

Zomkowski, Paul P.↗

Far Infrared Measurements of Cirrus

Improved techniques for remote sensing of cirrus are needed to obtain global data for assessing the effect of cirrus in climate change models. Model calculations show that the far infrared/sub-millimeter spectral region is well suited for retrieving cirrus Ice Water Path and particle size parameters. Especially useful cirrus information is obtained at frequencies below 60 cm-1 where single particle scattering dominates over thermal emission for ice particles larger than about 50 m. Earth radiance spectra have been obtained for a range of cloud conditions using an aircraft-based Fourier transform spectrometer. The Far InfraRed Sensor for Cirrus (FIRSC) is a Martin-Puplett interferometer which incorporates a polarizer for the beamsplitter and can be operated in either intensity or linear polarization measurement mode. Two detector channels span 10 to 140 cm-1 with a spectral resolution of 0.1 cm-1; achieving a Noise Equivalent Temperature of approximately 1K at 30 cm-1 in a 4 sec scan. Examples are shown of measured and modeled Earth radiance for a range of cloud conditions from 1998 and 1999 flights.

Nolt, I. G.↗

Hyper-spectral Atmospheric Sounding

The Geosynchronous Imaging Fourier Transform Spectrometer (GIFTS) is the first hyper-spectral remote sounding system to be orbited aboard a geosynchronous satellite. The GETS is designed to obtain revolutionary observations of the four dimensional atmospheric temperature, moisture, and wind structure as well as the distribution of the atmospheric trace gases, CO and O3. Although GIFTS will not be orbited until 2006-2008, a glimpse at the its measurement capabilities has been obtained by analyzing data from the National Polar-orbiting Operational Environmental Satellite System (NPOESS) Airborne Sounder Test-bed-Interferometer (NAST-I) and Aqua satellite Atmospheric Infrared Sounder (AIRS). In this paper we review the GIFTS experiment and empirically assess measurement expectations based on meteorological profiles retrieved from the NAST aircraft and Aqua satellite AIRS spectral radiances.

Smith, W. L.↗

Atmospheric CO2 retrieved from ground-based near IR solar spectra

The column-averaged volume mixing ratio (VMR) of CO2 over Kitt Peak, Arizona, has been retrieved from high-resolution solar absorption spectra obtained with the Fourier transform spectrometer on the McMath telescope. Simultaneous column measurements of CO2 at approx.6300/cm and O2 at approx.7900/cm were ratioed to minimize systematic errors. These column ratios were then scaled by the mean O2 VMR (0.2095) to yield column- averaged vmrs of CO2. These display similar behavior to the Mauna Loa in situ surface measurements. During the period 1977- 1995, the column-averaged mixing ratio of CO2 increased at an avenge rate of 1.49 +/- 0.04 ppmv/yr with seasonal variations of approx.7 ppmv peak-to-peak. Our retrievals demonstrate that this remote technique is capable of precisions better than 0.5%.

Yang, Zhong-Hua↗

Stratospheric sulfuric acid aerosols: composition and temperature discrimination with the ATMOS data set

The ATMOS Fourier transform spectrometer was flown for a fourth time on the Space Shuttle as part of the ATLAS-3 instrument payload in November 1994. More than 190 sunrise and sunset occultation events provided measurements of more than 30 atmospheric trace gases at latitudes 3-49(deg)N and 65-72(deg)S, including observations both inside and outside the Antarctic polar vortex.

aerosols ATMOS remote sensing↗

Empirical Line Parameters of NH(sub 3) from 4791 to 5294 cm(sup -1)

To support remote sensing of planetary atmospheres at 2??laboratory spectra of NH(sub 3) andf enriched (sup 14)NH(sub 3) and (sup 15)NH(sub 3) were recorded at 0.011 cm(sup -1) resolution with the McMath Fourier transform spectrometer (FTS) located at...

NH3 remote sensing planetary atmospheric study↗

Seasonal Variations of Water Vapor in the Lower Stratosphere Inferred from ATMOS/ATLAS-3 Measurements of H(sub 2)O and CH(sub 4)

Stratospheric measurements of H(sub 2)O and CH(sub 4) by the Atmospheric Trace Molecule Spectroscopy (ATMOS) Fourier transform spectrometer on the ATLAS-3 Shuttle flight in November 1994 have been used to investigate the altitude and geographic variability of H(sub 2)O and the quantity H(Eta?) = (H(sub 2)O + CH(sub 4)) in the tropics and at mid-latitudes (8-49in the northern hemisphere.

H2O CH4 ATMOS ATLAS-3 stratospheric water vapor↗

The Hot Bands of Methane Between 5 and 10(micro)m

Experimental line intensities of 1727 transitions arising from nine hot bands in the pentad-dyad system of methane are fitted to first and second order using the effective dipole moment expansion in the polyad scheme. The observed bands are V3-V2, V3-V4, V1-V2, V1-V4, 2V4-V4, V2+V4-V2, V2+V4-V4, 2V2-V4, and the intensities are obtained from long-path spectra recorded with the Fourier transform spectrometer located at Kitt Peak National Observatory. For the second order model, some of the 27 intensity parameters are not linearly independant, and so two methods (extrapolation and effective parameters) are propopsed to model the intensities of the hot bands.

methane hot bands dipole moment expansion Kitt Pea↗

The High Resolution Infrared Spectrum of CH(sub 3)D in the Region 900-1700 cm(sup -1)

The high resolution absorption spectrum of CH(sub 3)D in the region of 900-1700 cm(sup -1) has been revisited on the basis of new long path experimental data recorded with the Fourier transform spectrometer at Kitt Peak. A theoretical model used previously for spherical rotors has been adapted for polyatomic molecules in order to analyze the vibrational polyads of CH(sub 3)D simultaneously.

methane atmosphere study spectroscopy↗

The 1995 Atmospheric Trace Molecule Spectroscopy (ATMOS) Linelist

The Atmospheric Trace Molecule Spectroscopy (ATMOS) experiment uses a Fourier transform spectrometer on board the space shuttle to record infrared solar occultation spectra of the atmosphere. Described are the current version of the molecular spectroscopic database used for the analysis of the data obtained during three Space Shuttle missions between 1992 and 1994.

molecular database↗

Spectroscopic Parameters of H2S Polyads Between 3400 and 8000 cm x 10 to -1 exponent

The absorption spectra of hydrogen sulfide from 0.8 to 5 micro- meters were recorded with three spectral resolutions using the Fourier transform spectrometer at Kitt Peak National Observatory. Twenty bands were previously assigned so that accurate band origins and vi- brational parameters could be determined. Described are the analyses of the rotational structure of resonating hydrogen sulfide states.

molecular spectroscopy hydrogen sulfide absorption↗

Atmospheric CO2 retrieved from ground-based solar spectra

The column-averaged volume mixing ration of CO2 over Kitt Peak, Arizona, has been retrieved from high-resolution solar absorption spectra obtained with the fourier transform spectrometer on the McMath telescope.

infrared remote sensing↗