Search NASA⌕ Search

SEARCH · Search NASA

Results for “GHz”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

An 8.4-GHz dual-maser front-end system for Parkes reimplementation

An 8.4-GHz front-end system consisting of a feedhorn, a waveguide feed assembly, dual masers, and downconverters was reimplemented at Parkes as part of the Parkes Canberra Telemetry Array for the Voyager Neptune encounter. The front-end system was originally assembled by the European Space Agency and installed on the Parkes antenna for the Giotto project. It was also used on a time-sharing basis by the Deep Space Network as part of the Parkes Canberra Telemetry Array to enhance the data return from the Voyager Uranus encounter. At the conclusion of these projects in 1986, part of the system was then shipped to JPL on loan for reimplementation at Parkes for the Voyager Neptune encounter. New design and implementation required to make the system operable at Parkes included new microwave front-end control cabinets, closed-cycle refrigeration monitor system, noise-adding radiometer system, front-end controller assembly, X81 local oscillator multiplier, and refurbishment of the original dual 8.4-GHz traveling-wave masers and waveguide feed system. The front-end system met all requirements during the encounter and was disassembled in October 1989 and returned to JPL.

Trowbridge, D. L.↗

Statistical precipitation cell parameter estimation using passive 118-GHz O2 observations

This paper investigates the statistical retrieval of cell top altitude using high-resolution passive 118-GHz multichannel precipitation cell imagery. The observations were made using the millimeter-wave temperature sounder scanning spectrometer aboard the NASA ER-2 high-altitude research aircraft, during the Genesis of Atlantic Lows Experiment and the Cooperative Huntsville Meteorological Experiment, 1986. Results obtained using a nonlinear statistical 118-GHz cell top altitude retrieval technique are presented, illustrating a systematic method for parameter estimation from noisy nonlinearly dependent observations.

Gasiewski, A. J.↗

High resolution observations of compact H II regions at 230 GHz

Based on the idea that star formation goes on progressively in molecular clouds, a search was conducted for protostars by mapping compact H II regions at a frequency of 250 GHz. The IRAM 30 m radio telescope was used with a (3)He cooled bolometer. Twenty compact H II regions usually obtaining twice the expected free-free flux density, positionally coincident with the H II region, were observed. Even fine structure within the H II regions can be traced in the maps as in the case of G75.84+0.40 near ON-2. The high degree of coincidence between the 250 and 5 GHz map of Harris shows that the excess flux density observed must come from dust mixed with the ionized gas. Part of the dust must however be accumulated in the outer part of the H II region, since in some cases the contours are shifted outwards relative to the radio maps. This is consistent with the fact that in those cases where enough information is available to make a model fit, temperatures were derived of 80 + or - 30 K.

Wink, JOERN-E.↗

New space research frequency band proposals in the 20- to 40.5-GHz range

Future space research communications systems may require spectra above 20 GHz. Frequency bands above 20 GHz are identified that are suitable for space research. The selection of the proper bands depends on consideration of interference with other radio services, adequate bandwidths, link performance, and technical requirements for practical implementation.

Bishop, D. F.↗

Submicron gate InP power MISFET's with improved output power density at 18 and 20 GHz

The microwave characteristics are presented at 18 and 20 GHz of submicron gate indium phosphide (InP) metal-insulator-semiconductor field-effect transistors (MISFET's) for high output power density applications. InP power MISFET's were fabricated and the output power density was investigated as a function of drain-source spacing. The best output power density and gain were obtained for drain-source spacing of 3 microns. The output power density is 2.7 times greater than was previously measured for InP MISFET's at 18 and 20 GHz, and the power-added efficiency also increased.

Biedenbender, M. D.↗

The 60 GHz solid state power amplifier

A new amplifier architecture was developed during this contract that is superior to any other solid state approach. The amplifier produced 6 watts with 4 percent efficiency over a 2 GHz band at 61.5 GHz. The unit was 7 x 9 x 3 inches in size, 5.5 pounds in weight, and the conduction cooling through the baseplate is suitable for use in space. The amplifier used high efficiency GaAs IMPATT diodes which were mounted in 1-diode circuits, called modules. Eighteen modules were used in the design, and power combining was accomplished with a proprietary passive component called a combiner plate.

Mcclymonds, J.↗

A cooled 1- to 2-GHz balanced HEMT amplifier

The design details and measurement results for a cooled L-band (1 to 2 GHz) balanced high electron mobility transistor (HEMT) amplifier are presented. The amplifier uses commercially available packaged HEMT devices (Fujitsu FHR02FH). At a physical temperature of 12 K, the amplifier achieves noise temperatures between 3 and 6 K over the 1 to 2 GHz band. The associated gain is approximately 20 dB.

G. G. Ortiz↗

Integrated 222-GHz corner-reflector antennas

A high-gain monolithic millimeter-wave antenna has been designed, fabricated, and tested at 222 GHz. The structure consists of a traveling-wave antenna integrated on a 1.2-micron dielectric membrane and suspended in a longitudinal cavity etched in a silicon wafer. A new traveling-wave antenna design yields a wideband input impedance and a low cross-polarization component in the E- and quasi-H-plane patterns. A directivity of 17.7 dB and a main-beam efficiency of 88.5 percent are calculated from the 222-GHz pattern measurements. The integrated corner-reflector antenna is well suited for millimeter- and submillimeter-wave imaging applications in large f-number systems.

Gearhart, Steven S.↗

A 29.3-GHz cavity-enclosed aperture-coupled circular-patch antenna for microwave circuit integration

A circular patch antenna fed by an aperture-coupled microstrip line has been demonstrated at 29.3 GHz. The patch was enclosed by a cavity to reduce surface-wave interactions in an array environment and to improve heat dissipation when using active devices. The antenna exhibited a 2:1 input VSWR (voltage standing wave ratio) over a bandwidth of 12 percent from 27.52 to 30.95 GHz. The antenna should have applications in conformal phased arrays at millimeter-wave frequencies.

Navarro, Julio A.↗

A cooled 1-2 GHz balanced HEMT amplifier

The design details and measurement results for a cooled 1-GHz-bandwidth L-band HEMT amplifier are presented. The HEMT noise parameters were measured at a physical temperature of 12 K, and a balanced configuration was adopted. This has the advantage of providing a good input match even though the amplifiers in the two arms of the balanced circuit are poorly matched. However, there are disadvantages. The loss of the input hybrid degrades the noise temperature and coupling errors in the hybrids, and differences between the amplifiers reduce the gain and result in a noise contribution from the input load. In the amplifier described, these effects degrade the noise temperature by less than 1 K. The amplifier uses commercially available packaged HEMT devices. At a physical temperature of 12 K the amplifier achieves noise temperatures between 3 and 6 K over the 1-2-GHz band. The associated gain is about 20 dB.

Padin, Stephen↗

High-power generation in IMPATT devices in the 100-200-GHz range

A silicon double-drift IMPATT diode with high uniform doping levels was simulated. Simulation results show that it is possible for silicon IMPATT diodes to generate extremely high pulsed output power for frequencies above 100 GHz under high current-density operation. The highest output power matched to a 1-ohm load resistance obtained at 150 GHz is 37.7 W, with a dc current density of 200 kA/sq cm, although the calculated power conversion efficiency is low. It is also shown that the low-power conversion efficiency limits the diode's continuous wave power operation.

Chen, Chien-Chung↗

Submicron gate InP power MISFET's with improved output power density at 18 and 20 GHz

The microwave characteristics are presented at 18 and 20 GHz of submicron gate indium phosphide (InP) metal-insulator-semiconductor field-effect transistors (MISFETs) for high output power density applications. InP power MISFET's were fabricated and the output power density was investigated as a function of drain-source spacing. The best output power density and gain were obtained for drain-source spacing of 3 micron. The output power density is 2.7 times greater than was previously measured for InP MISFET's at 18 and 20 GHz, and the power-added efficiency also increased.

Biedenbender, Michael D.↗

On the use of passive microwaves at 37 GHz

Recently a number of studies have been presented on the use of the 37 GHz channels of the Scanning Multichannel Microwave Radiometer (SMMR) on board the Nimbus 7 satellite, and on the synergisms between the SNMMR and the AVHRR (Advanced Very High Resolution Radiometer). The approaches are interesting but raise a number of questions on the validity of the interpretation of the results. A study to analyze the Microwave Polarization Difference Temperature (MPDT) in terms of sensitivity to surface and atmospheric parameters is presented. For this a radiative transfer model is used so as to depict the shortcomings of this index. Another approach, using lower frequencies is described and compared to the 37 GHz MPDT.

Kerr, Yann H.↗

Future mobile satellite communication concepts at 20/30 GHz

The outline of a design of a system using ultra small earth stations (picoterminals) for data traffic at 20/30 GHz is discussed. The picoterminals would be battery powered, have an RF transmitter power of 0.5 W, use a 10 cm square patch antenna, and have a receiver G/T of about -8 dB/K. Spread spectrum modulation would be required (due to interference consideration) to allow a telex type data link (less than 200 bit/s data rate) from the picoterminal to the hub station of the network and about 40 kbit/s on the outbound patch. An Olympus type transponder at 20/30 GHz could maintain several thousand simultaneous picoterminal circuits. The possibility of demonstrating a picoterminal network with voice traffic using Olympus is discussed together with fully mobile systems based on this concept.

Barton, S. K.↗

Retrieval of total precipitable water over high latitude regions using radiometric measurements near 90 and 183 GHz

The functional dependence of brightness temperature, at frequencies near 183 and 90 GHz, on total precipitable water in the range less than 0.5 g/cm is examined by means of radiative transfer calculations of a number of observed temperature and relative humidity profiles over both ocean and land surfaces. A wide range of land and sea surface reflectivities is assumed in the calculations. Both sensitivity and precision of total precipitable water estimates are derived from these calculations. The estimated values in the Southern Hemisphere showed a gradual decrease toward the polar region, as expected. Radiative transfer calculations were made with a number of radiosonde data sets for a wide range of surface reflectivity and temperature. The calculated results are used to estimate total precipitable water from the airborne radiometric measurements over Alaska. Reflectivities at both 92 and 193 GHz are found to be mostly in the range of 0.2-0.4. High reflectivity is attributed to scattering by the snow particles on the ground.

Wang, J. R.↗

Effect of an applied magnetic field on the performance of a SIS receiver near 300 GHz

A superconductor-insulator-superconductor (SIS) receiver has been successfully constructed and tested for operation at 265 - 280 GHz using 1 micron/sq area Nb-AlO(x)-Nb tunnel junctions fabricated at Stony Brook. The best performance to date is a double sideband (DSB) receiver noise temperature of 129 K at 278 GHz. It is found that suppression of the Josephson pair currents with a magnetic field is essential for good performance and a stable dc bias point. Fields as high as 280 gauss have been used with no degradation of mixing performance. The improvement in the intermediate frequency output stability with progressively increasing magnetic fields is illustrated.

Mallison, W. H.↗

A low-noise 492 GHz SIS waveguide receiver

The design and performance are described of an SIS waveguide receiver which provides low noise performance from 375 to 510 GHz. At its design frequency of 492 GHz the receiver has a double-sideband noise temperature of about 172 K. By using embedded magnetic-field concentrators Josephson pair tunneling is effectively suppressed. Techniques for improving receiver performance are discussed.

Walker, C. K.↗

Enhancement of Thomson scatter by charged aerosols in the polar mesosphere - Measurements with a 1.29-GHz radar

The summer polar mesosphere was observed with the Sondrestrom 1.29-GHz radar with a new high-resolution data acquisition mode. On one occasion, a spatially narrow enhancement in the backscattered power was seen near an altitude of 88 km. Possible explanations are discussed and it is proposed that this layer may be the first example of polar mesosphere summer echoes detected above 1 GHz. Specifically, suggested that these echoes are enhanced Thomson scatter from a layer of charged aerosols, and speculate on the size and charge state.

Cho, John Y. N.↗