Search NASA⌕ Search

SEARCH · Search NASA

Results for “Galileo”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Parachute design for Galileo Jupiter entry probe

This paper discusses the parachute subsystem used on an atmospheric entry probe that will descend through the clouds of Jupiter. The entry probe is a part of the Galileo Project to be launched in 1985 aboard the Space Shuttle; the entry probe will encounter the planet in 1988. The parachute subsystem consists of a pilot parachute and a main parachute, and both are of conventional conical ribbon design. Key considerations in the design of the parachutes and a summary of the parachute subsystem test program, which includes two air drop tests and a systems drop test (balloon launched), are presented.

Rodier, R. W.↗
NASA NTRS1982

The response of Galileo aft cover components to laser radiation

The aft region of the Galileo probe will be subjected to severe heat transfer rates dominated by the radiation contributions. To assess the response of several vehicle aft region components to thermal radiation, tests employing a 10 KW CO2 laser were conducted. The experiments evaluated the annulus/aft cover interface, the umbilical feedthrough assembly and the mortar cover seal assembly. Experimental evidence of the response of the phenolic nylon heatshield and quantitative measures of its effect on gap geometries of several vehicle components were acquired. In addition, qualitative measures of the survivability of the irradiated components were obtained.

Metzger, J. W.↗
NASA NTRS1981

Virtual phase imager for Galileo

A CCD imaging array with a new virtual-phase technology that has been developed for use in a slow-scan imaging system for NASA's Galileo mission to Jupiter is described. Among its features are an absence of interlevel shorts, simplicity of fabrication, low dark current (less than 0.4 nA/sq cm), high full well, high quantum efficiency in the front side illumination mode, large dynamic range (greater than 5000), good charge transfer efficiency (0.99997), excellent linearity (0.2%), uniform pixel response (1%), and improved radiation hardness. It is noted that its operating voltages must be constrained to narrow windows to maintain good charge transfer efficiency and avoid the production of spurious and leakage charge.

Janesick, J. R.↗
NASA NTRS1982

Spallation of the Galileo probe heat shield

The Galileo probe heat shield will encounter severe radiative and convective heating during entry into Jupiter's atmosphere. The shield is made of two different carbon phenolic composites; one is chopped-molded, and the other is tape-wrapped, both of which tend to spall under intense heating conditions. To characterize this phenomenon, an experimental program, using a gasdynamic laser, was initiated. Tests were performed at a variety of radiation intensities, and both the total and spallation mass-loss rates were measured and correlated with intensity. These correlations were then applied to calculated flight heating conditions for two model atmospheres. Entry of a 310-kg probe into the nominal atmosphere would result in a spallation mass loss of 6.3 kg, or 7.4% of the expected thermochemical mass loss. Similarly, entry of that probe into the cool-dense atmosphere would result in 11.9 kg of spallation, or about 10% of the expected thermochemical mass loss.

Lundell, J. H.↗
NASA NTRS1982

Friction estimation technique for Galileo scan platform control

A friction estimation technique has been developed for the scan platform control of the Galileo spacecraft. The purpose of the estimation is to reduce the impact of friction in the scan platform actuator on the pointing performance of the scan platform so that tight pointing requirements can be met. The estimator operates by comparing the actual behavior of the platform with the expected behavior and attributing the difference to the presence of friction. The estimator is coupled with a proportional-integral-derivative controller to generate a control torque for the scan platform actuator. Since the algorithm will be implemented on an onboard digital computer, a stability analysis of the estimator-controller in discrete time is presented. The performance of the design is demonstrated by a sample slew test case.

Chodas, J. L.↗
NASA NTRS1982

Galileo spin rate control

This paper presents the analysis and design of the spin rate control flight algorithm for the dual-spin Galileo spacecraft. Because of thruster plume contamination constraints, only one poorly located thruster is available for spin rate correction in each spin direction. Hence, firing of any of the spin thrusters has a deleterious effect on spacecraft pointing. A control strategy was developed for achieving the desired spin rate correction while keeping disturbances at acceptable levels. This involved symmetrically distributed multiple thruster burns. Results of extensive tests of the adopted scheme on a computer simulation of the spacecraft are also presented.

Eke, F. O.↗
NASA NTRS1982

Galileo spacecraft pointing accuracy analysis

This paper describes the analysis required to evaluate the pointing performance of the Galileo spacecraft science instruments and antenna. The main contribution lies in the development of the models needed for pointing analysis. Pointing control mechanisms of the science instruments, as well as the spacecraft autonomous attitude determination process and the pointing control mechanisms for the high gain antenna, are provided in order to identify the various error sources involved. A covariance analysis method is then used to obtain the pointing capabilities of the instruments and the antenna. The results are depicted in tabular form to compare the capabilities against the levied requirements.

Hayati, S. A.↗
NASA NTRS1982

Advancements in aerothermodynamics in support of the Galileo probe

The Galileo probe, scheduled for launch in 1985, will experience the most severe heating environment ever encountered for a planetary mission, and the probe design should be based on a reliable definition of the aerothermal environment during entry. Significant advances in numerical computations make possible the prediction of such complicated flowfields, which include the effects of massive ablation injection, radiative transfer, turbulence, shape change and small angle of attack. Also included is a discussion of modeling and data inputs for numerical computations as deduced from both experimental and analytical studies concerning: radiation, transport and thermodynamic properties; probe afterbody flowfield and heating conditions; and the role of ablator spallation.

Moss, J. N.↗
NASA NTRS1983

Design of the Galileo remote science pointing actuators

This paper describes the two actuators developed for pointing the remote science instruments from the spinning Galileo spacecraft. Details of the key elements are presented together with their design features and developmental difficulties. Four techniques used for power and signal transfer across the actuators' rotating joints are also discussed.

Osborn, F. W.↗
NASA NTRS1983

The Galileo probe Li/SO2 battery: The safest battery on Jupiter

The unique power requirement of NASA's Galileo Jupiter Probe are most readily met by a Li/SO2 battery; however, because this battery system is not space flight proven, extensive effort was required to qualify this device from the stand point of performance and safety. Due to the rather checkered safety record of the Li/SO2 system, safety has been foremost among the design considerations and has been addressed at the cell, battery and system level. The mission requirements which led to the choice of the Li/SO2 battery and the safety engineering which went into the battery and power system design are described.

Marcoux, L. S.↗
NASA NTRS1983

Interplanetary trajectory design for the Galileo mission

The Galileo mission has been reprogrammed to use a direct earth-Jupiter trajectory with a May 1986 launch date and with arrival at Jupiter occurring in mid-1988. Within the constraints of Shuttle/Centaur launch vehicle capability and total spacecraft mass and performance, optimal broken-plane trajectories are generated, and the region of positive propellant margin in the launch/arrival space is determined. Mission constraints are used to define a launch/arrival strategy. It is also shown that a close flyby of any one of several asteroids or a comet is possible on the interplanetary transfer with minimal impact on mission performance.

Damario, L. A.↗
NASA NTRS1983

Navigation of the Galileo mission

An overview of the navigation of the Galileo mission is given. Predicted navigation performance for the various mission phases is discussed with particular emphasis given to the tour phase. Orbit determination strategies and resulting accuracies are discussed for various data types. In particular, the results of combining a new Very Long Baseline Interferometry (VLBI) data type called Differential One-Way Range (DOR) with conventional radio and optical data types are presented. Maneuver strategy results include the effects of maneuver placement and various targeting methods on propellant consumption and delivery accuracy. Emphasis is placed on new results obtained using asymptote and split targeting.

Miller, L. J.↗
NASA NTRS1983

Galileo atmospheric entry probe mission description

The mission goals, control parameters, and instrumentation for the Galileo entry probe are described. The goal for the probe is to penetrate the Jovian atmosphere to 10 bars, begin data gathering and transmission at about 0.1 bar, and make as many in-situ cloud measurements as possible. The probe will pass through a 16,000 K shock layer, which has led to a ratio of 5 kg of heat shield to every kg of instrumentation on the probe. An entry angle between -7.0 to -10.2 deg will be used, and possible targets with respect to declinations associated with a 1986 launch are discussed. The preentry mission phase, entry/descent sequence, and the baseline mission relay link performance are outlined. Data may be available down to 20 bars, and the probe performance will aid in design goals for subsequent Saturn and Uranus probes.

Vojvodich, N. S.↗
NASA NTRS1982

Galileo Institute for Astronomy (IFA) charge-coupled device (CCD) system

A fully portable self-contained charge-coupled device system has been constructed for shared use with the Galileo Project Imaging Team. The detector currently incorporated in the system is a Texas Instruments 500 x 500 three-phase CCD that has been thinned to operate in the backside illuminated mode. The detector and camera mainframe electronics were provided by the Jet Propulsion Laboratory. The support electronics and control interfaces necessary to operate the mainframe were constructed. The data system, which is built around a DeAnza Visacom VC-5000 Image Processor with an imbedded LSI-11 minicomputer, was also integrated. The capability to do image processing in real-time at the telescope has proved to be extremely valuable. The overall system read noise has been measured at 25 electrons. Full-well capacity is 40,000 electrons. Some results from laboratory tests and initial observing runs at the Mauna Kea 2.2-m telescope are presented.

Hlivak, R. J.↗
NASA NTRS1982

Charge-coupled device (CCD) television camera for NASA's Galileo mission to Jupiter

The CCD detector under construction for use in the slow-scan television camera for the NASA Galileo Jupiter orbiter to be launched in 1985 is presented. The science objectives and the design constraints imposed by the earth telemetry link, platform residual motion, and the Jovian radiation environment are discussed. Camera optics are inherited from Voyager; filter wavelengths are chosen to enable discrimination of Galilean-satellite surface chemical composition. The CCO design, an 800 by 800-element 'virtual-phase' solid-state silicon image-sensor array with supporting electronics, is described with detailed discussion of the thermally generated dark current, quantum efficiency, signal-to-noise ratio, and resolution. Tests of the effect of ionizing radiation were performed and are analyzed statistically. An imaging mode using a 2-1/3-sec frame time and on-chip summation of the signal in 2 x 2 blocks of adjacent pixels is designed to limit the effects of the most extreme Jovian radiation. Smearing due to spacecraft/target relative velocity and platform instability will be corrected for via an algorithm maximizing spacial resolution at a given signal-to-noise level. The camera is expected to produce 40,000 images of Jupiter and its satellites during the 20-month mission.

Klaasen, K. P.↗
NASA NTRS1982

Galileo spacecraft high gain antenna offset calibration

A mathematical model for the estimation of the dual-spin Galileo spacecraft high gain antenna misalignment is developed. The feasibility of the proposed technique is investigated by means of a simulation study. In-flight parameter estimation requires the development of a stochastic model of the spacecraft rotational biases and the earth-received signal strength measurements. The signal strength measurements for X-band frequency are used as observations to estimate the rotational biases and their corresponding uncertainties. The simulation study shows that the initial ground measured uncertainties of .6 mrad can be reduced by a factor of ten.

Hayati, S. A.↗
NASA NTRS1983

Return to Jupiter - Project Galileo

The mission profile, instrumentation, and mission objectives of the Galileo probe are described. Scheduled for Shuttle launch in 1986, with a boost from the Centaur upper stage, the probe will require over 2 yr to reach the Jovian system. An atmospheric entry probe will be released during Jupiter approach, and the orbiting module will relay the temperature, pressure, radio signals, spectroscopy, magnetometry, and particle counts, originating from the parachuting probe. The orbiting module will then continue on to a series of flybys and orbits around the Jovian moons by using a gravity assist from Jupiter after each pass of a moon. The orbiter will record spectrometric, radiometric, dust, visual, magnetic, and radio propagation data. The television camera is a CCD device with 640,000 diodes forming an 800 x 800 array in one square centimeter.

Johnson, T. V.↗
NASA NTRS1983

Development of the functional simulator for the Galileo attitude and articulation control system

A simulation program for verifying and checking the performance of the Galileo Spacecraft's Attitude and Articulation Control Subsystem's (AACS) flight software is discussed. The program, which is called Functional Simulator (FUNSIM), provides a simple method of interfacing user-supplied mathematical models coded in FORTRAN which describes spacecraft dynamics, sensors, and actuators; this is done with the AACS flight software, coded in HAL/S (High-level Advanced Language/Shuttle). It is thus able to simulate the AACS flight software accurately to the HAL/S statement level in the environment of a mainframe computer system. FUNSIM also has a command and data subsystem (CDS) simulator. It is noted that the input/output data and timing are simulated with the same precision as the flight microprocessor. FUNSIM uses a variable stepsize numerical integration algorithm complete with individual error bound control on the state variable to solve the equations of motion. The program has been designed to provide both line printer and matrix dot plotting of the variables requested in the run section and to provide error diagnostics.

Namiri, M. K.↗