Search NASA⌕ Search

SEARCH · Search NASA

Results for “General aviation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

A study of ASRS reports involving general aviation and weather encounters

Consideration is given to the nature and characteristics of problems involving dissemination of weather information, use of this information by pilots, its adequacy for the purpose intended, the ability of the air traffic control system to cope with weather related incidents, and the various aspects of pilot behavior, aircraft equipment, and NAVAIDS affecting flights in which weather figures. It is concluded from the study that skill and training deficiencies of general aviation pilots are not major factors in weather related occurrences, nor is lack of aircraft equipment. Major problem causes are identified with timely and easily interpreted weather information, judgement and attitude factors of pilots, and the functioning of the air traffic control system.

Rockwell, T. H.↗

Design Considerations for the Next Generation of General Aviation Designs

This paper discusses the results of research conducted at NASA Langley Research Center during two summer programs during 1994 and 1995. These programs were the NASA Advanced Design Program and the Langley Research Summer Scholars program. The work was incorporated in a three phase project at Embry-Riddle Aeronautical University which focused on development of the next generation Primary Flight Trainer, as well as in ERAU's participation in the AGATE General Aviation Design Competition. The project was conducted as part of the ERAU/NASA/USRA Advanced Design Program in Aeronautics as well as the AGATE competition. A design study was completed which encompassed the incorporation of existing conventional technologies and advanced technologies into PFT designs and advanced GA aircraft designs. Multiple aircraft configurations were also examined throughout the ADP/AGATE. Evaluations of the various technologies and configurations studied will be made and recommendations will be included.

Marchesseault, Brian D.↗

Well Clear: General Aviation and Commercial Pilots' Perceptioin of Unmanned Aerial Vehicles in the National Airspace System

This research explored how different pilots perceived the concept of the Well Clear Boundary (WCB) and observed if that boundary changed when dealing with manned versus unmanned aircraft systems (UAS), and the effects of other variables. Pilots' WCB perceptions were collected objectively through simulator recordings and subjectively through questionnaires. Objectively, significant differences were found in WCB perception between two pilot types (general aviation [GA], and Airline Transport Pilots [ATPs]), and significant WCB differences were evident when comparing two intruder types (manned versus unmanned aircraft). Differences were dependent on other manipulated variables (intruder approach angle, ownship speed, and background traffic levels). Subjectively, there were differences in WCB perception across pilot types; GA pilots trusted UAS aircraft higher than the more experienced ATPs. Conclusions indicate pilots' WCB mental models are more easily perceived as time-based boundaries in front of ownship, and more easily perceived as distance-based boundaries to the rear of ownship.

unmanned aerial systems↗

How Usability Testing Resulted in Improvements to Ground Collision Software for General Aviation: Improved Ground Collision Avoidance System (IGCAS)

The NASA improved Ground Collision Avoidance System (iGCAS) team conducted an onsite usability study at Experimental Aircraft Association (EAA) Air Venture in Oshkosh, Wisconsin from July 19 through July 26, 2015. EAA Air Venture had approximately 550,000 attendees from which the sample pool of pilots were selected. The objectives of this study were to assess the overall appropriateness and acceptability of iGCAS as a warning system for General Aviation aircraft, usability of the iGCAS displays and audio cues, test terrain avoidance characteristics, performance, functionality, pilot response time, and correlate terrain avoidance performance and pilot response time data.

collision avoidance↗

The Role of Spatial Disorientation in Fatal General Aviation Accidents

In-flight Spatial Disorientation (SD) in pilots is a serious threat to aviation safety. Indeed, SD may play a much larger role in aviation accidents than the approximate 6-8% reported by the National Transportation Safety Board (NTSB) each year, because some accidents coded by the NTSB as aircraft control-not maintained (ACNM) may actually result from SD. The purpose of this study is to determine whether SD is underestimated as a cause of fatal general aviation (GA) accidents in the NTSB database. Fatal GA airplane accidents occurring between January 1995 and December 1999 were reviewed from the NTSB aviation accident database. Cases coded as ACNM or SD as the probable cause were selected for review by a panel of aerospace medicine specialists. Using a rating scale, each rater was instructed to determine if SD was the probable cause of the accident. Agreement between the raters and agreement between the raters and the NTSB were evaluated by Kappa statistics. The raters agreed that 11 out of 20 (55%) accidents coded by the NTSB as ACNM were probably caused by SD (p less than 0.05). Agreement between the raters and the NTSB did not reach significance (p greater than 0.05). The 95% C.I. for the sampling population estimated that between 33-77% of cases that the NTSB identified as ACNM could be identified by aerospace medicine experts as SD. Aerospace medicine specialists agreed that some cases coded by the NTSB as ACNM were probably caused by SD. Consequently, a larger number of accidents may be caused by the pilot succumbing to SD than indicated in the NTSB database. This new information should encourage regulating agencies to insure that pilots receive SD recognition training, enabling them to take appropriate corrective actions during flight. This could lead to new training standards, ultimately saving lives among GA airplane pilots.

Scheuring, RIchard↗

General Aviation Flight Test of Advanced Operations Enabled by Synthetic Vision

A flight test was performed to compare the use of three advanced primary flight and navigation display concepts to a baseline, round-dial concept to assess the potential for advanced operations. The displays were evaluated during visual and instrument approach procedures including an advanced instrument approach resembling a visual airport traffic pattern. Nineteen pilots from three pilot groups, reflecting the diverse piloting skills of the General Aviation pilot population, served as evaluation subjects. The experiment had two thrusts: 1) an examination of the capabilities of low-time (i.e., <400 hours), non-instrument-rated pilots to perform nominal instrument approaches, and 2) an exploration of potential advanced Visual Meteorological Conditions (VMC)-like approaches in Instrument Meteorological Conditions (IMC). Within this context, advanced display concepts are considered to include integrated navigation and primary flight displays with either aircraft attitude flight directors or Highway In The Sky (HITS) guidance with and without a synthetic depiction of the external visuals (i.e., synthetic vision). Relative to the first thrust, the results indicate that using an advanced display concept, as tested herein, low-time, non-instrument-rated pilots can exhibit flight-technical performance, subjective workload and situation awareness ratings as good as or better than high-time Instrument Flight Rules (IFR)-rated pilots using Baseline Round Dials for a nominal IMC approach. For the second thrust, the results indicate advanced VMC-like approaches are feasible in IMC, for all pilot groups tested for only the Synthetic Vision System (SVS) advanced display concept.

Glaab, Louis J.↗

Development of a multipurpose smart recorder for general aviation aircraft

An intelligent flight recorder, called the Smart Recorder, was fabricated and installed on a King Air aircraft used in standard commercial charter service. This recorder was used for collection of data toward two objectives: (1) the characterization of the typical environment encountered by the aircraft; and (2) research in the area of trend monitoring. Data processing routines and data presentation formats were defined that are applicable to commuter size aircraft. The feasibility of a cost-effective, multipurpose recorder for general aviation aircraft was successfully demonstrated. Implementation of on-board environmental data processing increased the number of flight hours that could be stored on a single data cartridge and simplified the data management problem by reducing the volume of data to be processed in the laboratory. Trend monitoring algorithms showed less variability in the trend plots when compared against plots of manual data.

White, J. H.↗

Flight Experiment Investigation of General Aviation Self-Separation and Sequencing Tasks

A new flight operations concept called Small Aircraft Transportation System (SATS) Higher Volume Operations (HVO) was developed to increase capacity during Instrument Meteorological Conditions (IMC) at non-towered, non-radar airports by enabling concurrent operations of multiple aircraft. One aspect of this concept involves having pilots safely self-separate from other aircraft during approaches into these airports using appropriate SATS HVO procedures. A flight experiment was conducted to determine if instrument-rated general aviation (GA) pilots could self-separate and sequence their ownship aircraft, while following a simulated aircraft, into a non-towered, non-radar airport during simulated IMC. Six GA pilots' workload levels and abilities to perform self-separation and sequencing procedures while flying a global positioning system (GPS) instrument approach procedure were examined. The results showed that the evaluation pilots maintained at least the minimum specified separation between their ownship aircraft and simulated traffic and maintained their assigned landing sequence 100-percent of the time. Neither flight path deviations nor subjective workload assessments were negatively impacted by the additional tasks of self-separating and sequencing during these instrument approaches.

Murdoch, Jennifer L.↗

Studies in general aviation aerodynamics

The Department of Aerospace Engineering at the University of Maryland has completed a research study for NASA Langley on the application of drooped leading edges to high aspect wings. The experimental study conducted for this grant was a natural extension of work previously conducted at NASA Ames, the University of Michigan, NASA Langley and the University of Maryland. Previous research had shown that wing planform modifications (commonly referred to as drooped leading edge mods) could have a significant effect on reducing or eliminating the stall/spin characteristics of General Aviation (GA) aircraft. All aircraft studied in the earlier work had relatively low aspect ratio wings (AR = 6). Since future GA aircraft will feature higher aspect ratio wings, the obvious question was: how well will the dropped leading edge work on higher aspect ratio wings? The focus of the current study was to examine the effectiveness of the drooped leading edge modifications to higher aspect ratio wings with AR = 9 to 12.

Winkelmann, Allen E.↗

The design and development of a mixer compound exhaust system for a quiet clean general aviation turbofan

Lower engine fuel consumption has become a dominant factor in turbofan engine design due to rapidly increasing fuel costs. One engine component with a large impact on engine performance is the exhaust system. Previous exhaust system studies have demonstrated the significant exhaust system efficiency gains available through mixing of the core and bypass flows. Typically, a large, costly rig and engine program are required to develop and optimize these gains. The purpose of this paper is to present the results of the low-cost design system used for the quiet, clean general aviation turbofan mixer nozzle design and development. The scale model and full-scale engine test results confirm the predicted 3 to 5% reduction in cruise fuel consumption. This unique design system, which is based on integrating advanced three-dimensional viscous numerical methods with empirical optimization techniques, is summarized and detailed comparisons with test data are presented. The ability to accurately predict relative performance of mixer systems with substantially reduced development time and cost savings is demonstrated.

Blackmore, W. L.↗

Design and evaluation of an integrated Quiet, Clean General Aviation Turbofan (QCGAT) engine and aircraft propulsion system

The design was based on the LTS-101 engine family for the core engine. A high bypass fan design (BPR=9.4) was incorporated to provide reduced fuel consumption for the design mission. All acoustic and pollutant emissions goals were achieved. A discussion of the preliminary design of a business jet suitable for the developed propulsion system is included. It is concluded that large engine technology can be successfully applied to small turbofans, and noise or pollutant levels need not be constraints for the design of future small general aviation turbofan engines.

German, J.↗

General aviation and community development; Summer Faculty Fellowship Program in Engineering Systems Design, Hampton, Va., June 2-August 15, 1975, Report

The document summarizes the results of a faculty program in engineering systems design whose primary aim was to provide a framework for communication and collaboration between academic personnel, research engineers, and scientists in government agencies and private industry. Other objectives were to provide a useful study of a broadly based societal problem, requiring the coordinated efforts of a multidisciplinary team, and to generate experience in the development of systems design and multidisciplinary activities. The success of the program is evidenced by the resulting study of general aviation and community development, characterized by thorough scrutiny of ideas, philosophies, and academic perspectives.

Sincoff, M. Z.↗

Flight evaluations of the effect of advanced control systems and displays on the handling qualities of a general aviation airplane.

Flight tests have shown that, by means of improved displays and advanced control systems, it is possible to transform a typical light airplane into a flying machine that borders on being perfect from a handling-qualities standpoint. A flight-director display and an attitude-command control system used in combination transformed a vehicle with poor handling qualities during ILS approaches in turbulent air into a vehicle with extremely good handling qualities. The attitude-command control system also improved the ride qualities of the airplane. A rate-command control system was less beneficial than an attitude-command control system. Although this paper deals primarily with general aviation aircraft, the results presented pertain to other types of aircraft. Short-takeoff-and-landing (STOL) aircraft would be a natural application of the control systems because, as a result of their low speeds, they encounter many of the handling-qualities problems noted on light aircraft. The improved ride qualities should be of interest to all airline operations, and for STOL aircraft in particular, because of their prolonged exposure to low-altitude turbulence.

Loschke, P. C.↗

Avco Lycoming quiet clean general aviation turbofan engine

A fan module was developed using an existing turboshaft engine. The fan was designed using the latest in large engine noise control technology. A mixer was added to reduce the already low exhaust gas velocity. A nacelle incorporating sound treatment was provided for the test engine. A noise prediction model was used through the design process to evaluate the various design alternatives. Acoustic tests were then made to verify the prediction and identify the noise characteristics of the fan, core, jet, and sound treatment. Analysis of the recorded data yielded close agreement with the expected results. Core noise, as was expected, was the predominant source of noise for the quiet clean general aviation turbofan (QCGAT) engine. Flyover noise predictions were made which indicated that the Avco Lycoming QCGAT engine would meet the goals set for the QCGAT program.

Wilson, C. A.↗

Light transport and general aviation aircraft icing research requirements

A short term and a long term icing research and technology program plan was drafted for NASA LeRC based on 33 separate research items. The specific items listed resulted from a comprehensive literature search, organized and assisted by a computer management file and an industry/Government agency survey. Assessment of the current facilities and icing technology was accomplished by presenting summaries of ice sensitive components and protection methods; and assessments of penalty evaluation, the experimental data base, ice accretion prediction methods, research facilities, new protection methods, ice protection requirements, and icing instrumentation. The intent of the research plan was to determine what icing research NASA LeRC must do or sponsor to ultimately provide for increased utilization and safety of light transport and general aviation aircraft.

Breeze, R. K.↗

Price Determination of General Aviation, Helicopter, and Transport Aircraft

The NASA must assess its aeronautical research program with economic as well as performance measures. It thus is interested in what price a new technology aircraft would carry to make it attractive to the buyer. But what price a given airplane or helicopter will carry is largely a reflection of the manufacturer's assessment of the competitive market into which the new aircraft will be introduced. The manufacturer must weigh any new aerodynamic or system technology innovation he would add to an aircraft by the impact of this innovation upon the aircraft's economic attractiveness and price. The intent of this paper is to give price standards against which new technologies and the NASA's research program can be assessed. Using reported prices for general aviation, helicopter, and transport aircraft, price estimating relations in terms of engine and airframe characteristics have been developed. The relations are given in terms of the aircraft type, its manufactured empty weight, engine weight, horsepower or thrust. Factors for the effects of inflation are included to aid in making predictions of future aircraft prices. There are discussions of aircraft price in terms of number of passenger seats, airplane size and research and development costs related to an aircraft model, and indirectly as to how new technologies, aircraft complexity and inflation have affected these.

Anderson, Joseph L.↗

Potential influences of heavy rain on general aviation airplane performance

Recent NASA wind tunnel tests of airfoils in a simulated rain environment under extremely heavy rain conditions have shown reductions in maximum lift and increases in drag. Conventional airfoils were tested with and without high lift devices and tests of laminar-flow airfoils without high-lift devices were conducted. Both types of airfoils indicated performance decrements when exposed to a simulated heavy rain environment. For the laminar flow airfoil, the rain influence was observed to occur throughout the angle of attack range, whereas for the conventional airfoil in a high lift configuration, the rain influence occurred mostly at the higher angles of attack. The performance decrement for the laminar-flow airfoil appeared to be a result of laminar-to-turbulent boundary-layer transition whereas the performance penalty for the conventional airfoil appeared to be the result of premature separation. The results of these tests are presented and the implication of the results to general aviation airplanes are discussed.

Dunham, R. E., Jr.↗

Scale-free Graphs for General Aviation Flight Schedules

In the late 1990s a number of researchers noticed that networks in biology, sociology, and telecommunications exhibited similar characteristics unlike standard random networks. In particular, they found that the cummulative degree distributions of these graphs followed a power law rather than a binomial distribution and that their clustering coefficients tended to a nonzero constant as the number of nodes, n, became large rather than O(1/n). Moreover, these networks shared an important property with traditional random graphs as n becomes large the average shortest path length scales with log n. This latter property has been coined the small-world property. When taken together these three properties small-world, power law, and constant clustering coefficient describe what are now most commonly referred to as scale-free networks. Since 1997 at least six books and over 400 articles have been written about scale-free networks. In this manuscript an overview of the salient characteristics of scale-free networks. Computational experience will be provided for two mechanisms that grow (dynamic) scale-free graphs. Additional computational experience will be given for constructing (static) scale-free graphs via a tabu search optimization approach. Finally, a discussion of potential applications to general aviation networks is given.

Alexandov, Natalia M.↗