Search NASA⌕ Search

SEARCH · Search NASA

Results for “Generalized gradient approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Phase-Dependent Photocatalytic Ability of TiO 2 : A First-Principles Study

Abstract: The electronic properties of defected TiO2 were investigated using the first-principles calculations based on density functional theory and generalized gradient approximation. Three typical defects, oxygen vacancy, titanium interstitial, and titanium vacancy, were considered in three TiO2 polymorphs, anatase, rutile, and brookite, respectively. Our calculations demonstrated that defect band is formed by removing oxygen atom from or inserting interstitial Ti atom into the TiO2 lattice, which is responsible for the improvement of photocatalytic ability due to the enhanced visible-light absorption. Our calculations further revealed that the defect formation energy increases as following brookite, anatase, and rutile, indicating that defects are easy to be created in brookite TiO2. The relatively high defect density and wide defect band contribute to the better photocatalytic performance of brookite TiO2 in visible light.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Prediction of Reliable Metal-PH₃ Bond Energies for Ni, Pd, and Pt in the 0 and +2 Oxidation States

Phosphine-based catalysts play an important role in many metal-catalyzed carbon-carbon bond formation reactions yet reliable values of their bond energies are not available. We have been studying homogeneous catalysts consisting of a phosphine bonded to a Pt, Pd, or Ni. High level electronic structure calculations at the CCSD(T)/complete basis set level were used to predict the M-PH₃ bond energy (BE) for the 0 and +2 oxidation states for M=Ni, Pd, and Pt. The calculated bond energies can then be used, for example, in the design of new catalyst systems. A wide range of exchange-correlation functionals were also evaluated to assess the performance of density functional theory (DFT) for these important bond energies. None of the DFT functionals were able to predict all of the M-PH3 bond energies to within 5 kcal/mol, and the best functionals were generalized gradient approximation functionals in contrast to the usual hybrid functionals often employed for main group thermochemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure-Induced Valence and Structural Changes in YbMn 2 Ge 2 -Inelastic X-ray Spectroscopy and Theoretical Investigations

The pressure-induced valence change of Yb in YbMn 2 Ge 2 has been studied by high pressure inelastic X-ray emission and absorption spectroscopy in the partial fluorescence yield mode up to 30 GPa. The crystal structure of YbMn 2 Ge 2 has been investigated by high pressure powder X-ray diffraction experiments up to 40 GPa. The experimental investigations have been complemented by first principles density functional theoretical calculations using the generalized gradient approximation with an evolutionary algorithm for structural determination. The Yb valence and magnetic structures have been calculated using the self-interaction corrected local spin density approximation. The X-ray emission results indicate a sharp increase of Yb valence from v = 2.42(2) to v = 2.75(3) around 1.35 GPa, and Yb reaches a near trivalent state (v = 2.95(3)) around 30 GPa. Further, a new monoclinic P1 type high pressure phase is found above 35 GPa; this structure is characterized by the Mn layer of the ambient (I4/mmm) structure transforming into a double layer. The theoretical calculations yield an effective valence of v = 2.48 at ambient pressure in agreement with experiment, although the pure trivalent state is attained theoretically at significantly higher pressures (above 40 GPa).

Kumar, Ravhi S↗

Adsorption on Fe-MOF-74 for C1–C3 Hydrocarbon Separation

An increase in demand for energy efficient processes for the separation of a mixture of hydrocarbons drives the need for understanding metal–organic frameworks (MOFs) that can provide better noncryogenic alternatives for the fractionation of hydrocarbon mixtures. Here we study the structure and properties of a metal–organic framework, Fe-MOF-74, and its effectiveness to separate C1–C3 hydrocarbon mixtures. The binding of these hydrocarbons to the open metal sites of Fe-MOF-74 has been investigated using a meta-generalized gradient approximation density functional, M06-L, which has previously been validated for systems containing transition metals. For interpretive purposes, charge model 5 (CM5) is used to determine the partial atomic charges on the metal cations and the oxygen atoms of the ligands surrounding these metal centers. Our computations show preferential binding to the metal center of Fe-MOF-74 of unsaturated hydrocarbons over saturated ones in agreement with experimental results, and the calculated binding energies are in semiquantitative agreement with experiment. The results are analyzed in terms of various factors contributing to the binding, including structural distortion, electrostatics, damped dispersion, charge transfer, back bonding, and ligand field effects on the d orbitals. The CM5 charges are not sensitive to small differences in structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Alumina(0001)/Water Interface: Structural Properties and Infrared Spectra from First-Principles Molecular Dynamics Simulations

We investigated the atomic structure and infrared spectra of the alumina(0001)/water interface, using first-principles molecular dynamics simulations based on density functional theory within the generalized gradient approximation. The computed structural properties of the interface are in good agreement with the results of synchrotron X-ray experiments. In this work detailed analyses of the computed infrared spectra revealed two types of water molecules at the hydrophilic oxide/water interface: molecules participating in strong “ice-like” hydrogen bonding with the oxide surface and molecules involved in weaker “liquid-like” hydrogen bonding. Our results provide a molecular interpretation of the “ice-like” and “liquid-like” bands observed in sum-frequency vibrational spectroscopy experiments and underscore the significance of strong hydrogen-bonding interactions in determining the orientation of interfacial water molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ab Initio Thermodynamic Model for Magnesium Carbonates and Hydrates

An ab initio thermodynamic framework for predicting properties of hydrated magnesium carbonate minerals has been developed using density-functional theory linked to macroscopic thermodynamics through the experimental chemical potentials for MgO, water, and CO2. Including semiempirical dispersion via the Grimme method and small corrections to the generalized gradient approximation of Perdew, Burke, and Ernzerhof for the heat of formation yields a model with quantitative agreement for the benchmark minerals brucite, magnesite, nesquehonite, and hydromagnesite. The model shows how small differences in experimental conditions determine whether nesquehonite, hydromagnesite, or magnesite is the result of laboratory synthesis from carbonation of brucite, and what transformations are expected to occur on geological time scales. Because of the reliance on parameter-free first principles methods, the model is reliably extensible to experimental conditions not readily accessible to experiment and to any mineral composition for which the structure is known or can be hypothesized, including structures containing defects, substitutions, or transitional structures during solid state transformations induced by temperature changes or processes such as water, CO2, or O2 diffusion. Demonstrated applications of the ab initio thermodynamic framework include an independent means to evaluate differences in thermodynamic data for lansfordite, predicting the properties of Mg analogs of Ca-based hydrated carbonates monohydrocalcite and ikaite which have not been observed in nature, and an estimation of the thermodynamics of barringtonite from the stoichiometry and a single experimental observation.

Environmental Molecular Sciences Laboratory↗

Towards a unified picture of the water self-ions at the air-water interface: a density functional theory perspective

The propensities of the water self ions, H3O+ and OH- , for the air-water interface has implications for interfacial acid-base chemistry. Despite numerous experimental and computational studies, no consensus has been reached on the question of whether or not H3O+ and/or OH- prefer to be at the water surface or in the bulk. Here we report a molecular dynamics simulation study of the bulk vs. interfacial behavior of H3O+ and OH- that employs forces derived from density functional theory with a generalized gradient approximation exchangecorrelation functional (specifically, BLYP) and empirical dispersion corrections. We computed the potential of mean force (PMF) for H3O+ as a function of the position of the ion in a 215-molecule water slab. The PMF is flat, suggesting that H3O+ has equal propensity for the air-water interface and the bulk. We compare the PMF for H3O+ to our previously computed PMF for OH- adsorption, which contains a shallow minimum at the interface, and we explore how differences in solvation of each ion at the interface vs. the bulk are connected with interfacial propensity. We find that the solvation shell of H3O+ is only slightly dependent on its position in the water slab, while OH- partially desolvates as it approaches the interface, and we examine how this difference in solvation behavior is manifested in the electronic structure and chemistry of the two ions. DJT was supported by National Science Foundation grant CHE-0909227. CJM was supported by the U.S. Department of Energy‘s (DOE) Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences and Biosciences. Pacific Northwest National Laboratory (PNNL) is operated for the Department of Energy by Battelle. The potential of mean force required resources of the Oak Ridge Leadership Computing Facility at the Oak Ridge National Laboratory, which is supported by the Office of Science of the U.S. Department of Energy under Contract No. DEAC05-00OR22725. The remaining simulations and analysis used resources of the National Energy Research Scientific Computing Center, which is supported by the Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. at at Lawrence Berkeley National Laboratory. MDB is grateful for the support of the Linus Pauling Distinguished Postdoctoral Fellowship Program at PNNL.

Baer, Marcel D.↗

Importance of Correctly Describing Charge-Transfer Excitations for Understanding the Chemical Effect in SERS

The enhancement mechanism due to the molecule-surface chemical coupling in surface-enhanced Raman scattering (SERS) is governed to a large extent by the energy difference between the highest occupied molecular orbital (HOMO) of the metal and the lowest unoccupied molecular orbital (LUMO) of the molecule. Here, we investigate the importance of correctly describing charge-transfer excitations, using time dependent density functional theory (TDDFT), when calculating the chemical coupling in SERS. It is well-known that TDDFT, using traditional functionals, underestimates the position of charge-transfer excitations. Here, we show that this leads to a significant overestimation of the chemical coupling mechanism in SERS. Significantly smaller enhancements are found using long-range corrected (LC) functionals as compared with a traditional generalized gradient approximation (GGA) and hybrid functionals. Enhancement factors are found to be smaller than 530 and typically less than 50. Our results show that it is essential to correctly describe charge-transfer excitations for predicting the chemical enhancement in SERS.

Environmental Molecular Sciences Laboratory↗

Efficient simulations of charge density waves in the transition metal Dichalcogenide TiSe 2

Charge density waves (CDWs) in transition metal dichalcogenides are the subject of growing scientific interest due to their rich interplay with exotic phases of matter and their potential technological applications. Here, using density functional theory with advanced meta-generalized gradient approximations (meta-GGAs) and linear response time-dependent density functional theory (TDDFT) with state-of-the-art exchange-correlation kernels, we investigate the electronic, vibrational, and optical properties in 1T-TiSe 2 with and without CDW. In both bulk and monolayer TiSe 2 , the electronic bands and phonon dispersions in either normal or CDW (semiconducting) phase are described well via meta-GGAs, which separate the valence and conduction bands just as HSE06 does but with significantly more computational feasibility. The experimentally observed humps of electron energy loss spectroscopy are successfully reproduced in TDDFT. Our work opens the door to simulating these complexities in CDW compounds from first principles by revealing meta-GGAs as an accurate low-cost alternative to HSE06.

Electronic properties and materials↗

MP-ALOE: an r2SCAN dataset for universal machine learning interatomic potentials

We present MP-ALOE, a dataset of nearly 1 million DFT calculations using the accurate r2SCAN meta-generalized gradient approximation. Covering 89 elements, MP-ALOE was created using active learning and primarily consists of off-equilibrium structures. We benchmark a machine learning interatomic potential trained on MP-ALOE, and evaluate its performance on a series of benchmarks, including predicting the thermochemical properties of equilibrium structures; predicting forces of far-from-equilibrium structures; maintaining physical soundness under static extreme deformations; and molecular dynamic stability under extreme temperatures and pressures. MP-ALOE shows strong performance on all of these benchmarks and is made public for the broader community to utilize.

Kuner, Matthew C↗

Colossal magnetoresistance in a nonsymmorphic antiferromagnetic insulator

Here we investigate antiferromagnetic Eu 5 In 2 Sb 6 , a nonsymmorphic Zintl phase. Our electrical transport data show that Eu 5 In 2 Sb 6 is remarkably insulating and exhibits an exceptionally large negative magnetoresistance, which is consistent with the presence of magnetic polarons. From ab initio calculations, the paramagnetic state of Eu 5 In 2 Sb 6 is a topologically nontrivial semimetal within the generalized gradient approximation (GGA), whereas an insulating state with trivial topological indices is obtained using a modified Becke–Johnson potential. Notably, GGA + U calculations suggest that the antiferromagnetic phase of Eu 5 In 2 Sb 6 may host an axion insulating state. Our results provide important feedback for theories of topological classification and highlight the potential of realizing clean magnetic narrow-gap semiconductors in Zintl materials.

36 MATERIALS SCIENCE↗

Ab initio molecular dynamics simulations of liquid water using high quality meta-GGA functionals

We have used ab initio molecular dynamics (AIMD) to characterize water properties using two meta-generalized gradient approximation (meta-GGA) functionals, M06-L-D3 and B97M-rV, and compared their performance against a standard GGA corrected for dispersion, revPBE-D3, at ambient conditions (298 K, and 1 g cm –3 or 1 atm). Simulations of the equilibrium density, radial distribution functions, self-diffusivity, the infrared spectrum, liquid dipole moments, and characterizations of the hydrogen bond network show that all three functionals have overcome the problem of the early AIMD simulations that erroneously found ambient water to be highly structured, but they differ substantially among themselves in agreement with experiment on this range of water properties. We show directly using water cluster data up through the pentamer that revPBE-D3 benefits from a cancellation of its intrinsic functional error by running classical trajectories, whereas the meta-GGA functionals are demonstrably more accurate and would require the simulation of nuclear quantum effects to realize better agreement with all cluster and condensed phase properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rational design of super-alkalis and their role in CO 2 activation

Super-alkalis are clusters of atoms. With ionization potentials smaller than those of the alkali atoms, they are playing an increasing role in chemistry as highlighted by recent applications in solar cells as well as in Li-ion batteries. For the past 40 years superalkalis were designed using inorganic elements with the sp orbital character. Here, we show that a large class of superalkalis composed of only simple metal atoms, transition metal complexes as well as organic molecules can be designed by making use of electron counting rules beyond the octet rule. Examples include Al3+, Mn(B3N3H6)2+, B9C3H12+, and C5NH6+ which obey the jellium shell closure rule, the 18-electron rule, the Wade–Mingos rule, and Hückel's aromatic rule, respectively. We further show that the ability of superalkalis to transfer an electron easily can be used to activate a CO2 molecule by transforming it from a linear to a bent structure. These results, based on density functional theory with generalized gradient approximation for exchange–correlation potential, open the door to a new class of catalysts for CO2 activation.

Zhao, Tianshan↗

Implications of the fractional charge of hydroxide at the electrochemical interface

Rational design of materials that efficiently convert electrical energy into chemical bonds will ultimately depend on a thorough understanding of the electrochemical interface at the atomic level. Towards this goal, the use of density functional theory (DFT) at the generalized gradient approximation (GGA) level has been applied widely in the past 15 years. In the calculation of electrochemical reaction energetics using GGA-DFT, it is frequently implicitly assumed that ions in the Helmholtz plane have unit charge. However, the ion charge is observed to be fractional near the interface through both a capacitor model and through Bader charge partitioning. In this work, we show that this spurious charge transfer can be effectively mitigated by continuum charging of the electrolyte. Finally, we show that, similar to hydronium, the observed fractional charge of hydroxide is not due to a GGA level self-interaction error, as the partial charge is observed even when using hybrid level exchange–correlation functionals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantifying the hydration structure of sodium and potassium ions: taking additional steps on Jacob's Ladder

The ability to reproduce the experimental structure of water around the sodium and potassium ions is a key test of the quality of interaction potentials due to the central importance of these ions in a wide range of important phenomena. In this study, we simulate the Na + and K + ions in bulk water using three density functional theory functionals: (1) the generalized gradient approximation (GGA) based dispersion corrected revised Perdew, Burke, and Ernzerhof functional (revPBE-D3) (2) the recently developed strongly constrained and appropriately normed (SCAN) functional (3) the random phase approximation (RPA) functional for potassium. We compare with experimental X-ray diffraction (XRD) and X-ray absorption fine structure (EXAFS) measurements to demonstrate that SCAN accurately reproduces key structural details of the hydration structure around the sodium and potassium cations, whereas revPBE-D3 fails to do so. However, we show that SCAN provides a worse description of pure water in comparison with revPBE-D3. RPA also shows an improvement for K + , but slow convergence prevents rigorous comparison. Finally, we analyse cluster energetics to show SCAN and RPA have smaller fluctuations of the mean error of ion–water cluster binding energies compared with revPBE-D3.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of local distortion effects on X-ray absorption of ferroelectric perovskites from first principles simulations

Understanding the role of ferroelectric polarization in modulating the electronic and structural properties of crystals is critical for advancing these materials for overcoming various technological and scientific challenges. However, due to difficulties in performing experimental methods with the required resolution, or in interpreting the results of methods therein, the nanoscale morphology and response of these surfaces to external electric fields has not been properly elaborated. Here, in this work, we investigate the effect of ferroelectric polarization and local distortions in a BaTiO 3 perovskite, using two widely used computational approaches which treat the many-body nature of X-ray excitations using different philosophies, namely the many-body, delta-self-consistent-field determinant (mb-ΔSCF) and the Bethe–Salpeter equation (BSE) approaches. We show that in agreement with our experiments, both approaches consistently predict higher excitations of the main peak in the O–K edge for the surface with upward polarization. However, the mb-ΔSCF approach mostly fails to capture the L 2,3 separations at the Ti–L edge, due to the absence of spin–orbit coupling in Kohn–Sham density functional theory (KS-DFT) at the generalized gradient approximation level. On the other hand, and most promising, we show that application of the GW/BSE approach successfully reproduces the experimental XAS, both the relative peak intensities as well as the L 2,3 separations at the Ti–L edges upon ferroelectric switching. Thus simulated XAS is shown to be a powerful method for capturing the nanoscale structure of complex materials, and we underscore the need for many-body perturbation approaches, with explicit consideration of core-hole and multiplet effects, for capturing the essential physics in these systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗