SEARCH · Search NASA

Results for “Geostationary”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

All sources NASA NTRS DOE OSTI

NASA NTRS2019

Geostationary Lightning Mapper Flash Characteristics of Electrified Snowfall Events

This study examines characteristics of lightning in snowfall events (i.e., thundersnow, 20 TSSN) from the perspective of the Geostationary Lightning Mapper (GLM) and the National Environmental Satellite Data and Information Service (NESDIS) merged Snowfall Rate (mSFR) product. A thundersnow detection algorithm (TDA) was derived from the GLM and mSFR which resulted in a probability of detection (POD) of 66.7% when compared to the Meteorological Terminal Air Report (METAR) reports of TSSN. However, using the TDA an additional 2,175 lightning flashes within detected snowfall were identified that were not observed by the METAR reports, indicating that TSSN has been under reported in previous literature. TSSN flashes observed by GLM have mean flash areas, durations, and total optical energy outputs of 754 km2, 402 ms, and 1,342 fJ, which are between the 50th and 99th percentile values for all flashes within the GLM field of view. A comparison with data from the National Lightning Detection Network (NLDN) indicated that the NLDN had at least one cloud or ground flash detection in 1,709 of the 2,214 flashes observed by GLM in snowfall. An average of 5.85 NLDN flashes were assigned to a single GLM flash when the NLDN flash data were constrained by the GLM flash duration and spatial footprint. Statistically significant (p<0.01) differences in flash area and flash energy were found between flashes that were observed by the NLDN and those that were not. Additionally, when GLM was combined with the NLDN, at least 11.1% of flashes involved a tall human-made object like an antenna or wind turbine.

lightning↗

NASA NTRS2019

Earth Observations from a New Generation of Geostationary Satellites

The latest generation of geostationary satellites carry sensors such as the Advanced Baseline Imager (GOES-16/17) and the Advanced Himawari Imager (Himawari-8/9) that closely mimic the spatial and spectral characteristics of widely used polar orbiting sensors such as EOS/MODIS. More importantly, they provide observations at 1-5-15 minute intervals, instead of twice a day from MODIS, offering unprecedented opportunities for monitoring large parts of the Earth. In addition to serving the needs of weather forecasting, these observations offer new and exciting opportunities in managing solar power, fighting wildfires, and tracking air pollution. Creation of actionable information in near real-time from these data streams is a challenge that is best addressed through collaborative efforts among the industry, academia and government agencies.

Nemani, Ramakrishna R.↗

NASA NTRS2019

Deep Learning Emulation of Atmospheric Correction for Geostationary Sensors

New generation geostationary satellites make reflectance observations available at a continental scale with unprecedented spatiotemporal resolution and spectral range. Generating Earth monitoring products from these observations requires retrieval of the basic parameter, surface reflectance (SR), by atmospheric correction (AC). Algorithms for atmospheric correction, including Multi-Angle Implementation of Atmospheric Correction (MAIAC), are adapted for each sensor and are too computationally complex to be run in real time, relying instead on look-up tables with precomputed values. Machine learning methods, including convolutional neural networks, have demonstrated performance in learning complex, nonlinear mappings and extracting insight from high-dimensional remote sensing data. In this work, we present a deep learning emulator of MAIAC to retrieve both SR and cloud products. Using this adaptation of deep learning-based emulation to remote sensing, we demonstrate stable SR retrieval over a variety of land covers and viewing conditions and accurate cloud detection. Further, a comparison of computation time suggests emulation as a compelling alternative for expensive physical simulation, especially for applications benefited by near-real time data, such as agricultural management and disaster response.

Duffy, Kate↗

NASA NTRS2019

Observation of Absorbing Aerosols Above Clouds over the South-East Atlantic Ocean from the Geostationary Satellite SEVIRI – Part 1: Method Description and Sensitivity

High temporal resolution observations from satellites have a great potential for studying the impact of biomass burning aerosols and clouds over the South East Atlantic Ocean (SEAO). This paper presents a method developed to retrieve simultaneously aerosol and cloud properties in aerosol above cloud conditions from the geostationary instrument Meteosat Second Generation/Spinning Enhanced Visible and Infrared Imager (MSG/SEVIRI). The above-cloud Aerosol Optical Thickness (AOT), the Cloud Optical Thickness (COT) and the Cloud droplet Effective Radius (CER) are derived from the spectral contrast and the magnitude of the signal measured in three channels in the visible to shortwave infrared region. The impact of the absorption from atmospheric gases on the satellite signal is corrected by applying transmittances calculated using the water vapour profiles from a Met Office forecast model. The sensitivity analysis shows that a 10% error on the humidity profile leads to an 18.5% bias on the above-cloud AOT, which highlights the importance of an accurate atmospheric correction scheme. In situ measurements from the CLARIFY-2017 airborne field campaign are used to constrain the aerosol size distribution and refractive index that is assumed for the aforementioned retrieval algorithm. The sensitivities in the retrieved AOT, COT and CER to the aerosol model assumptions are assessed. Between 09:00-15:00 UTC, an uncertainty of 40% is estimated on the above-cloud AOT, which is dominated by the sensitivity of the retrieval to the single scattering albedo. The absorption AOT is less sensitive to the aerosol assumptions with an uncertainty generally lower than 17% between 09:00-15:00 UTC. Outside of that time range, as the scattering angle decreases, the sensitivity of the AOT and the absorption AOT to the aerosol model increases. The retrieved cloud properties are only weakly sensitive to the aerosol model assumptions throughout the day, with biases lower than 6% on the COT and 3% on the CER. The stability of the retrieval over time is analysed. For observations outside of the backscattering glory region, the time-series of the aerosol and cloud properties are physically consistent, which confirms the ability of the retrieval to monitor the temporal evolution of aerosol above cloud events over the SEAO.

Peers, Fanny↗

NASA NTRS2019

Earth Observations from a New Generation of Geostationary Satellites

Nemani, Ramakrishna R.↗

NASA NTRS2018

Geostationary Visible Imager Calibration for the CERES SYN1deg Edition 4 Product

The Clouds and the Earth’s Radiant Energy System (CERES) project relies on geostationary (GEO) imager derived TOA broadband fluxes and cloud properties to account for the regional diurnal fluctuations between the Terra and Aqua CERES and MODIS measurements. Anchoring the GEO visible calibration to the MODIS reference calibration and stability is critical for consistent fluxes and cloud retrievals across the 16 GEO imagers utilized in the CERES record. The CERES Edition 4A used GEO and MODIS ray-matched radiance pairs over all-sky tropical ocean (ATO-RM) to transfer the MODIS calibration to the GEO imagers. The primary GEO ATO-RM calibration was compared with the deep convective cloud (DCC) ray-matching and invariant desert/DCC target calibration methodologies, which are all tied to the same Aqua-MODIS calibration reference. Results indicate that most GEO record mean calibration method biases are within 1% with respect to ATO-RM. Most calibration method temporal trends were within 0.5% relative to ATO-RM. The monthly gain trend standard errors were mostly within 1% for all methods and GEOs. The close agreement amongst the independent calibration techniques validates all methodologies, and verifies that the coefficients are not artifacts of the methodology but rather adequately represent the true GEO visible imager degradation.

Doelling, David↗

NASA NTRSDate not supplied

Application of Artificial Intelligence for Surface PM2.5 Estimations from Geostationary Satellite and Atmospheric Numerical Model Data

PM2.5, particulate matter (PM) with a diameter less than or equal to 2.5 μm, is emitted from anthropogenic fuel combustion and forest fires. Due to their small size, PM2.5 can penetrate into respiratory systems and cause or exacerbate serious illness. The US Environmental Protection Agency (EPA) regulates the levels of surface PM2.5 but surface monitoring has spatial and temporal limitations. The Aerosol Optical Depth (AOD) retrievals from the Geostationary Operational Environmental Satellite (GOES) missions and meteorological factors can be utilized as an alternative technique to estimate surface PM2.5 levels at a higher spatial and temporal resolution compared to surface monitors. Traditional estimation approaches rely on linear regression techniques and have limitations modeling the nonlinear relationship between the meteorological factors, AOD retrievals, and surface PM2.5. We compare different machine learning techniques and identify the best-suited model that can represent the nonlinearity between the factors affecting PM2.5 levels

Manisha Khatri↗

NASA NTRS2019

Observation of absorbing aerosols above clouds over the south-east Atlantic Ocean from the geostationary satellite SEVIRI – Part 1: Method description and sensitivity

High-temporal-resolution observations from satellites have a great potential for studying the impact of biomass burning aerosols and clouds over the south-east Atlantic Ocean (SEAO). This paper presents a method developed to simultaneously retrieve aerosol and cloud properties in aerosol above-cloud conditions from the geostationary instrument Meteosat Second Generation/Spinning Enhanced Visible and Infrared Imager (MSG/SEVIRI). The above-cloud aerosol optical thickness (AOT), the cloud optical thickness (COT) and the cloud droplet effective radius (CER) are derived from the spectral contrast and the magnitude of the signal measured in three channels in the visible to shortwave infrared region. The impact of the absorption from atmospheric gases on the satellite signal is corrected by applying transmittances calculated using the water vapour profiles from a Met Office forecast model. The sensitivity analysis shows that a 10 % error on the humidity profile leads to an 18.5 % bias on the above-cloud AOT, which highlights the importance of an accurate atmospheric correction scheme. In situ measurements from the CLARIFY-2017 airborne field campaign are used to constrain the aerosol size distribution and refractive index that is assumed for the aforementioned retrieval algorithm. The sensitivities in the retrieved AOT, COT and CER to the aerosol model assumptions are assessed. Between 09:00 and 15:00 UTC, an uncertainty of 40 % is estimated on the above-cloud AOT, which is dominated by the sensitivity of the retrieval to the single-scattering albedo. The absorption AOT is less sensitive to the aerosol assumptions with an uncertainty generally lower than 17 % between 09:00 and 15:00 UTC. Outside of that time range, as the scattering angle decreases, the sensitivity of the AOT and the absorption AOT to the aerosol model increases. The retrieved cloud properties are only weakly sensitive to the aerosol model assumptions throughout the day, with biases lower than 6 % on the COT and 3 % on the CER. The stability of the retrieval over time is analysed. For observations outside of the backscattering glory region, the time series of the aerosol and cloud properties are physically consistent, which confirms the ability of the retrieval to monitor the temporal evolution of aerosol above-cloud events over the SEAO.

cloud properties↗

NASA NTRS2019

Probability Index of Low Stratus and Fog at Dawn using Dual Geostationary Satellite Observations from COMS and FY-2D near the Korean Peninsula

We developed a new remote sensing method for detecting low stratus and fog (LSF) at dawn in terms of probability index (PI) of LSF from simultaneous stereo observations of two geostationary-orbit satellites; the Korean Communication, Ocean, and Meteorological Satellite (COMS; 128.2°E); and the Chinese FengYun satellite (FY-2D; 86.5°E). The algorithm was validated near the Korean Peninsula between the months of April and August from April 2012 to June 2015, by using surface observations at 45 meteorological stations in South Korea. The optical features of LSF were estimated by using satellite retrievals and simulated data from the radiative transfer model. The PI was calculated using the combination of three satellite-observed variables: 1) the reflectance at 0.67 μm (R(0.67)) from COMS, and 2) the FY-2D R(0.67) minus the COMS R(0.67) (△R(0.67)) and (3) the FY-2D-COMS difference in the brightness temperature difference between 3.7 and 11.0 μm (ΔBTD(3.7-11)). The three variables, adopted from the top three probability of detection (POD) scores for their fog detection thresholds: △R(0.67) (0.82) > ΔBTD(3.7-11) (0.73) > R(0.67) (0.70) > BTD(3.7-11) (0.51). The LSF PI for this algorithm was significantly better in the two case studies compared to that using COMS only (i.e., R(0.67) or BTD(3.7-11)), so that this improvement was due to △R(0.67) and ΔBTD(3.7-11). Overall, PI in the LSF spatial distribution has the merits of a high detection rate, a specific probability display, and a low rate of seasonality and variability in detection accuracy. Therefore, PI would be useful for monitoring LSF in near-real-time, and to further its forecast ability, using next-generation satellites.

fog↗

NASA NTRS2021

Observation of absorbing aerosols above clouds over the South-East Atlantic Ocean from the geostationary satellite SEVIRI - Part 2: Comparison with MODIS and aircraft measurements from the CLARIFY-2017 field campaign

To evaluate the SEVIRI retrieval for aerosols above clouds presented in Part 1 of the companion paper, the algorithm is applied over the south-east Atlantic Ocean during the CLARIFY-2017 field campaign period. The first step of our analysis compares the retrieved aerosol and cloud properties against equivalent products from the MODIS MOD06ACAERO retrieval (Meyer et al., 2015). While the correlation between the two satellite retrievals of the above-cloud aerosol optical thickness (AOT) is good (R = 0.78), the AOT retrieved by SEVIRI is 20.3 % smaller than that obtained from the MODIS retrieval. This difference in AOT is attributed mainly to the more absorbing aerosol model assumed for the SEVIRI retrieval compared to MODIS. The underlying cloud optical thickness (COT) derived from the two satellites is in good agreement (R = 0.90). The cloud droplet effective radius (CER) retrieved by SEVIRI is consistently smaller than MODIS by 2.2 µm, which is mainly caused by the use of different spectral bands of the satellite instruments. In the second part of our analysis, we compare the forecast water vapour profiles used for the SEVIRI atmospheric correction as well as the aforementioned aerosol and cloud products with in situ measurements made from the Facility for Airborne Atmospheric Measurements (FAAM) aircraft platform during the CLARIFY-2017 campaign. Around Ascension Island, the column water vapour used to correct the SEVIRI signal is overestimated by 3.1 mm in the forecast compared to that measured by dropsondes. However, the evidence suggests that the accuracy of the atmospheric correction improves closer to the African coast. Consistency is observed between the SEVIRI above-cloud AOT and in situ measurements (from cavity ring-down spectroscopy instruments) when the measured single-scattering albedo is close to that assumed in the retrieval algorithm. On the other hand, the satellite retrieval overestimates the AOT when the assumed aerosol model is not absorbing enough. Consistency is also found between the cloud properties retrieved by SEVIRI and the CER measured by a cloud droplet probe and the liquid water path derived from a microwave radiometer. Despite the instrumental limitations of the geostationary satellite, the consistency obtained between SEVIRI, MODIS and the aircraft measurements demonstrates the ability of the retrieval in providing additional information on the temporal evolution of the aerosol properties above clouds.

absorbing aerosols↗

NASA NTRS2021

Temporal Interpolation of Geostationary Satellite Imagery With Optical Flow

Applications of satellite data in areas such as weather tracking and modeling, ecosystem monitoring, wildfire detection, and land-cover change are heavily dependent on the tradeoffs to spatial, spectral, and temporal resolutions of observations. In weather tracking, high-frequency temporal observations are critical and used to improve forecasts, study severe events, and extract atmospheric motion, among others. However, while the current generation of geostationary (GEO) satellites has hemispheric coverage at 10-15-min intervals, higher temporal frequency observations are ideal for studying mesoscale severe weather events. In this work, we present a novel application of deep learning-based optical flow to temporal upsampling of GEO satellite imagery. We apply this technique to 16 bands of the GOES-R/Advanced Baseline Imager mesoscale dataset to temporally enhance full-disk hemispheric snapshots of different spatial resolutions from 10 to 1 min. Experiments show the effectiveness of task-specific optical flow and multiscale blocks for interpolating high-frequency severe weather events relative to bilinear and global optical flow baselines. Finally, we demonstrate strong performance in capturing variability during convective precipitation events.

Image processing↗

NASA NTRSDate not supplied

A Novel Machine Learning Method for Surface PM2.5 Estimations from Geostationary Satellites

Particulate matter (PM) with a diameter of less or equal to 2.5 μm, known as PM , affects human health as it penetrates the respiratory system. The Environmental Protection Agency (EPA) measures the atmospheric concentration of PM using air quality monitors stationed throughout the Continental United States (CONUS). Such measurements are points on a spatial domain and therefore, might not be representative of the air quality at nearby areas considering that the composition of the atmosphere is highly variable from place to place. Satellite based AOD permits a spatially uniform means of estimating PM and new geostationary satellites provide high temporal and spatial resolution estimation of AOD. However, the concentration of PM is non-linearly dependent on other atmospheric parameters that include relative humidity, temperature, and height of the planetary boundary layer. This information may be estimated at similar spatial and temporal resolutions as AOD from numerical modeling such as from the National Oceanic and Atmospheric Administration’s (NOAA) High Resolution Rapid Refresh (HRRR) model which resolves near real-time atmospheric conditions over the CONUS. The estimation of PM concentration is a multi-parametric problem that considers the effect of temporal dependencies among the different parameters. Deep learning approaches are appropriate for such complex estimation problems as they intrinsically capture relations among multiple non-linear parameters. This study compares deep-learning methods to traditional regression analysis to demonstrate the capabilities of these methods in predicting PM2.5 concentrations. Additionally, a novel ensemble learning approach is employed to identify scientific processes that could further improve the estimation of PM concentration. Utilizing Long Short-Term Memory (LSTM) neural networks, which are suitable for multivariate time series estimation problems as they are capable of learning long-term dependencies, individual models are created for each EPA station and trained on the aforementioned dataset collocated over each station. Individual station models are merged if the model's performance is improved by reducing the root mean squared error (RMSE) metric. This ensemble training method ultimately reduces the RMSE value. Evaluation of these results provide insights into physical processes and related observable parameters that may contribute to PM concentrations. Identified parameters evaluated to be statistically different between the merged and unmerged models are expected to improve overall performance. These new parameters are then utilized for reevaluation of the deep learning methods with an extreme gradient boosting model with an RMSE of 5.5 providing the best results.

George Priftis↗

NASA NTRSDate not supplied

Deep Learning System for Efficient Processing of Geostationary Satellite Imagery

Improved capabilities of Earth monitoring satellites are enabling a wide range of studies on the environmental effects of climate change, often leveraging the recent advancements in machine learning. At the same time, the new capabilities, including higher spatial resolution and temporal frequency, are expanding the amount of data generated at exponential rates. Further, a large majority of archived datasets generated by scientific processing is never used. This motivates the development of an efficient machine learning system for end-to-end processing of multi-level satellite datasets, from level 1 top of atmosphere observations to user friendly environmental variables of interest. Using current generation geostationary satellites GOES-16/17 (NOAA/NASA), and Himawari-8/9 (JAXA), we present an interchangeable set of machine models to perform spectral adjustment among sensors, physical model emulation, LEO-GEO emulation, and optical flow in a high performance computing environment. We use these tools on the NASA Earth eXchange (NEX) to generate consistent virtual observations across sensors, perform atmospheric correction and cloud detection, and estimate surface reflectance, surface temperature and atmospheric winds. This approach aims to improve the robustness of remotely sensed data processing by learning from diverse sets of observations while enabling near real-time and on-demand capabilities.

Thomas Vandal↗

NASA NTRSDate not supplied

Applications and Performance of a Lightning Risk Assessment using Geostationary Lightning Mapper (GLM) Data

Lightning is a hazard globally, particularly in lesser-developed countries. Cloud-to-ground lightning strikes are a threat to human safety, motivating a desire to monitor location-based lightning risk to mitigate harm. A lightning risk assessment for human safety was created that uses a combination of probabilistic risk calculation and spatial lightning mapping data to produce a risk magnitude. This risk magnitude evolves with time and changing conditions and is compared to tolerability thresholds in order to evaluate safety. The risk assessment using lightning mapping array (LMA) flash extent density (FED) data was found to perform comparatively (with respect to issuing lightning warnings) to a more standard method of monitoring lightning safety where National Lightning Detection Network (NLDN) flashes were monitored within a 5 nautical mile radius of a location of interest. This research investigates the replacement of LMA FED with FED from the Geostationary Lightning Mapper (GLM) within the risk assessment framework. Using GLM FED would allow for risk to be calculated outside of LMA domains and anywhere within the GLM field of view, including areas outside of the United States (US). A few applications of the risk method with GLM FED are shown and discussed for locations both in and outside of the US. Additionally, the performance of the risk method is compared based on the type of lightning input source (LMA vs GLM). The end goal of this work is to provide forecasters and end users with a tool to help monitor lightning risk in decision support scenarios.

Kelley Murphy↗

NASA NTRSDate not supplied

Cloud Climate Data Records from Geostationary Satellites to Support CERES: Challenges and Recent Progress

Cloud properties are critical for understanding the Earth’s radiation budget and cloud feedbacks. At NASA Langley Research Center, the Satellite ClOud and Radiative Property retrieval System (SatCORPS) provides real-time and historical analyses of clouds derived from Geostationary satellite (GEOsat) data for weather and climate applications. For the Clouds and the Earth’s Radiant Energy System (CERES) program, the global constellation of GEOsats has been analyzed since 2000 to help characterize and account for the diurnal cycle of clouds and their radiative impacts in the CERES climate data record. Obtaining consistent cloud properties over the GEOsat data record at all times of day during the CERES era is a major objective but a significant challenge considering the diversity of imaging capabilities deployed during that time. A brief overview of the current CERES/GEO cloud property data record constructed from three generations of GEOsat imagers for CERES Edition-4 is presented. In this version, different algorithms were applied to different satellites to take advantage of as much spectral information as possible for each satellite. Under this approach, the derived cloud properties were found to become accurate (and more similar to MODIS) for the GEOsat imagers with more spectral information. However, this approach also led to some discontinuities in cloud properties across platforms. Significant differences were also found between daytime and nighttime cloud properties. This paper will highlight the major issues in the Edition-4 record and discuss new strategies and early results from the next version of the SatCORPS GEOsat cloud property time series in development for CERES Edition-5 with the goal of improving day-night and cross-platform consistency during the CERES record.

clouds↗

NASA NTRSDate not supplied

Development of a Global Reference Surface Reflectance and BRDF Datasets from Geostationary Satellite Observations and AERONET Measurements

Surface reflectances and their dependency on illumination-view geometries (i.e., BRDF) are the foundation of many high-level satellite products for land and water monitoring. Yet it is difficult to evaluate the quality of satellite-based surface reflectances with ground-based measurements due to the spatial scale differences. In order to fill the gap, here we develop a reference dataset of surface reflectance and BRDF at the global AERONET sites with data streams from operational geostationary sensors including Himawari 8/9 AHI, GK-2A AMI, and GOES 16/17 ABI. Taking the top-of-atmosphere (TOA) reflectance and the site measured atmospheric aerosol optical depth (AOD) as the main inputs, we apply the GeoNEX-AC algorithm to performance accurate atmospheric correction and derive 10-minute surface reflectance and daily Ross-Thick-Li-Sparse (RTLS) BRDF parameters at AERONET sites where coincident AOD measurements and TOA observations are available from 2016 (for Himawari) or 2018 (for GOES) onwards. The algorithm ensures that the retrieved surface BRDF parameters, along with the site-measured AOD, allow the atmospheric radiative transfer model, SHARM, accurately simulate the observed TOA reflectance at diurnal and longer time scales. They are our best estimates of the surface optical properties and thus can serve as the “reference” to evaluate the performance of operational atmospheric correction algorithms (where AOD is assumed unknown and needs to be retrieved). The reference BRDF also allow us to evaluate the spectral band ratios between the SWIR (e.g., 2200 nm) and the visible (e.g., 650 nm) regions, which are commonly used in operational atmospheric correction algorithms. Finally, we demonstrate that the reference dataset can be used to develop potential data synergies between different GEO satellites as well as GEO-LEO sensors.

Weile Wang↗

NASA NTRSDate not supplied

Deriving Broadband Radiances from Geostationary Satellite Visible Radiance Channels for Use in the CERES SYN1deg Product

The NASA CERES project was designed to monitor the Earth’s radiation budget, both at the regional and global scale. The CERES SSF1deg single satellite product provides TOA flux observations from Aqua, Terra, NPP, and NOAA-20. The SYN1deg product incorporates observations from Terra, Aqua, and geostationary (GEO) satellites. The GEO observations are included in the SYN1deg product to infer the regional diurnal cycle between CERES observations. GEO satellites throughout the CERES record have different narrowband spectral response functions and do not directly observe radiances over the broadband spectra of CERES instruments. Hence the emphasis of this study is improving the process of deriving broadband radiances from the myriad GEO visible channel observations. We present a new method for converting the narrowband radiances observed from GEO operational satellites. This study relies on radiative transfer model hyper-spectral radiances for many cloud and surface conditions under all angular conditions observed by GEO sensors. First, the hyper-spectral radiances from a radiative transfer model must be convolved with the spectral response function of the visible imager for each GEO sensor in the CERES record. For each angular bin and surface type, the clear-sky and multiple optical depth and phase cloudy-sky narrowband and broadband reflectance pairs are linearly regressed. This study found that, no matter how the scene conditions are stratified, for example the all-sky, clear-sky, ice or water clouds, they all provide similar linear regressions. This includes ocean glint conditions, where the clear-sky reflectance exceeds cloudy conditions and yet the relationship was found to be linear in the given angular bin. This infers that no GEO retrieved cloud information is necessary in the narrowband to broadband conversion process, which relies only on visible channel reflectance. Over land, most of the GEO visible channels do not observe the NIR vegetation reflectance. We intend to use land adjustment factors developed using the TOA reflectance difference between the real-time MODIS .86um and the .64um channel. We validate this approach by using coincident observational data between CERES and MODIS aboard Aqua and Terra as well as GEO and CERES observations .

CERES↗

NASA NTRSDate not supplied

Designing and Evaluating NASA SPoRT Center’s DustTracker-AI Model for Detecting Dust in NASA/NOAA Geostationary Satellite Imagery

- Near real-time identification of airborne dust in satellite imagery is important for mitigating the adverse effects of dust storms on human activities. - False color Red-Green-Blue (RGB) imagery has been used for dust detection, but it has limitations and can be difficult to interpret. - The NASA Short-term Research and Transition (SPoRT) center has developed a night-time dust detection random forest (NT-DustTracker-AI, Berndt et al. 2021) model using NASA/NOAA Geostationary Operational Environmental Satellite-16 (GOES-16) Advanced Baseline Imager (ABI) infrared imagery as inputs. - The SPoRT center has partnered with the NOAA National Weather Service to evaluate the model for use in weather forecasting operations, and preliminary results have been positive. - The SPoRT center has expanded the model to cover both day and night, continuing to use infrared imagery as inputs. This new model, known as DustTracker-AI, has shown good agreement with available dust observations

Robert A. Junod↗