Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ground Operations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Microwave Power Transmission System Studies. Volume 1: Executive Summary

A study of microwave power generation, transmission, reception and control was conducted as a part of a program to demonstrate the feasibility of power transmission from geosynchronous orbit. A summary is presented of results concerning design approaches, estimated costs (ROM), critical technology, associated ground and orbital test programs with emphasis on dc to rf conversion, transmitting antenna, phase control, mechanical systems, flight operations, ground power receiving-rectifying antenna with systems analysis, and evaluation. Recommendations for early further in-depth studies complementing the technology program are included.

Maynard, O. E.↗
NASA NTRS2006

Evaluation of Mesoscale Model Phenomenological Verification Techniques

Forecasters at the Spaceflight Meteorology Group, 45th Weather Squadron, and National Weather Service in Melbourne, FL use mesoscale numerical weather prediction model output in creating their operational forecasts. These models aid in forecasting weather phenomena that could compromise the safety of launch, landing, and daily ground operations and must produce reasonable weather forecasts in order for their output to be useful in operations. Considering the importance of model forecasts to operations, their accuracy in forecasting critical weather phenomena must be verified to determine their usefulness. The currently-used traditional verification techniques involve an objective point-by-point comparison of model output and observations valid at the same time and location. The resulting statistics can unfairly penalize high-resolution models that make realistic forecasts of a certain phenomena, but are offset from the observations in small time and/or space increments. Manual subjective verification can provide a more valid representation of model performance, but is time-consuming and prone to personal biases. An objective technique that verifies specific meteorological phenomena, much in the way a human would in a subjective evaluation, would likely produce a more realistic assessment of model performance. Such techniques are being developed in the research community. The Applied Meteorology Unit (AMU) was tasked to conduct a literature search to identify phenomenological verification techniques being developed, determine if any are ready to use operationally, and outline the steps needed to implement any operationally-ready techniques into the Advanced Weather Information Processing System (AWIPS). The AMU conducted a search of all literature on the topic of phenomenological-based mesoscale model verification techniques and found 10 different techniques in various stages of development. Six of the techniques were developed to verify precipitation forecasts, one to verify sea breeze forecasts, and three were capable of verifying several phenomena. The AMU also determined the feasibility of transitioning each technique into operations and rated the operational capability of each technique on a subjective 1-10 scale: (1) 1 indicates that the technique is only in the initial stages of development, (2) 2-5 indicates that the technique is still undergoing modifications and is not ready for operations, (3) 6-8 indicates a higher probability of integrating the technique into AWIPS with code modifications, and (4) 9-10 indicates that the technique was created for AWIPS and is ready for implementation. Eight of the techniques were assigned a rating of 5 or below. The other two received ratings of 6 and 7, and none of the techniques a rating of 9-10. At the current time, there are no phenomenological model verification techniques ready for operational use. However, several of the techniques described in this report may become viable techniques in the future and should be monitored for updates in the literature. The desire to use a phenomenological verification technique is widespread in the modeling community, and it is likely that other techniques besides those described herein are being developed, but the work has not yet been published. Therefore, the AMIU recommends that the literature continue to be monitored for updates to the techniques described in this report and for new techniques being developed whose results have not yet been published. 111

Lambert, Winifred↗
NASA NTRS2024

Additional Aviation Sustainability Strategies

Emissions from the aviation sector are expected to grow significantly in the next few decades due to growing demand for aviation. The U.S. fleet size has increased significantly in the past 20 years, growing from 2,132 aircraft to 5,485 aircraft. Similarly from 1990 to 2019, aviation emissions more than doubled, growing faster than any other transportation mode. These emissions include carbon dioxide (CO2), as well as non-CO2 sources including nitrogen oxides (NOx), sulfur dioxide (SO2), water (H2O), and particulate matter (soot). However, this report focuses specifically on CO2 emissions because the impacts from CO2 are well-understood and long-lived. There are also many climate goals tied to CO2 emissions, including the US Aviation Climate Action Plan which is pushing for net-zero in 2050. CO2 is a greenhouse, or heat-trapping, gas that comes from the extraction and burning of fossil fuels, from wildfires, and natural processes like volcanoes. Greenhouse gases absorb heat radiating from the Earth’s surface and release it in all directions, including back toward Earth’s surface. By adding more CO2 to the atmosphere, humans amplify the natural greenhouse effect, causing global temperature to rise. Since the onset of industrial times in 1750, human activities have raised atmospheric CO2 by 50%. Considering this challenge, the United States has set a climate goal to achieve net-zero CO2 emissions in the U.S. aviation sector by 2050 to reduce the environmental impact of aviation. Net-zero emissions refers to the amount of greenhouse gases (GHGs), such as CO2, methane or SO2, that are removed from the atmosphere being equal to those emitted by human activity. This contrasts with carbon-neutrality, which refers to no net release of carbon dioxide to the atmosphere, especially through offsetting emissions, that could be accomplished through a series of actions. As of 2022, the goal of net-zero has been adopted by much of the aviation industry including multiple airlines and countries. To reach net-zero by 2050, sustainable aviation fuels (SAFs) are identified as the technology that could provide the greatest impact within this timeframe. However, certain challenges may limit the production and/or adoption of SAFs in the marketplace, such as competition for feedstocks, production capacity, and high cost. In this case, SAFs would be insufficient to meet the net-zero CO2 emission goals. Therefore, in addition to SAFs, other strategies will be needed to close the gap on emissions produced as a result of SAF shortfalls or to enhance the impact of SAFs on reducing emissions. NASA’s Aeronautics Research Mission Directorate (ARMD) aims to examine these additional pathways to explore how its research may best contribute to the realization of net-zero emissions by 2050. Specifically, this effort considers strategies that can reduce emissions in the aviation sector in combination with the use of SAFs and carbon offsets while still meeting projected passenger demand. The strategies considered are not only feasible but also could be operationally scalable by 2050. The goal of this report is to investigate additional strategies such as alternative flight and ground operations, providing insight into the CO2 emission reduction potential and feasibility of strategy implementation by 2050.

Carbon Emissions↗
NASA NTRS1991

Transformation reborn: A new generation expert system for planning HST operations

The Transformation expert system (TRANS) converts proposals for astronomical observations with the Hubble Space Telescope (HST) into detailed observing plans. It encodes expert knowledge to solve problems faced in planning and commanding HST observations to enable their processing by the Science Operations Ground System (SOGS). Among these problems are determining an acceptable order of executing observations, grouping of observations to enhance efficiency and schedulability, inserting extra observations when necessary, and providing parameters for commanding HST instruments. TRANS is currently an operational system and plays a critical role in the HST ground system. It was originally designed using forward-chaining provided by the OPS5 expert system language, but has been reimplemented using a procedural knowledge base. This reimplementation was forced by the explosion in the amount of OPS5 code required to specify the increasingly complicated situations requiring expert-level intervention by the TRANS knowledge base. This problem was compounded by the difficulty of avoiding unintended interaction between rules. To support the TRANS knowledge base, XCL, a small but powerful extension to Commom Lisp was implemented. XCL allows a compact syntax for specifying assignments and references to object attributes. XCL also allows the capability to iterate over objects and perform keyed lookup. The reimplementation of TRANS has greatly diminished the effort needed to maintain and enhance it. As a result of this, its functions have been expanded to include warnings about observations that are difficult or impossible to schedule or command, providing data to aid SPIKE, an intelligent planning system used for HST long-term scheduling, and providing information to the Guide Star Selection System (GSSS) to aid in determination of the long range availability of guide stars.

Gerb, Andrew↗
NASA NTRS1985

Mathematical models for space shuttle ground systems

Math models are a series of algorithms, comprised of algebraic equations and Boolean Logic. At Kennedy Space Center, math models for the Space Shuttle Systems are performed utilizing the Honeywell 66/80 digital computers, Modcomp II/45 Minicomputers and special purpose hardware simulators (MicroComputers). The Shuttle Ground Operations Simulator operating system provides the language formats, subroutines, queueing schemes, execution modes and support software to write, maintain and execute the models. The ground systems presented consist primarily of the Liquid Oxygen and Liquid Hydrogen Cryogenic Propellant Systems, as well as liquid oxygen External Tank Gaseous Oxygen Vent Hood/Arm and the Vehicle Assembly Building (VAB) High Bay Cells. The purpose of math modeling is to simulate the ground hardware systems and to provide an environment for testing in a benign mode. This capability allows the engineers to check out application software for loading and launching the vehicle, and to verify the Checkout, Control, & Monitor Subsystem within the Launch Processing System. It is also used to train operators and to predict system response and status in various configurations (normal operations, emergency and contingent operations), including untried configurations or those too dangerous to try under real conditions, i.e., failure modes.

Tory, E. G.↗
NASA NTRS1974

Operational aspects of Skylab Student Project experiments

The activities associated with the operational aspects ot the Skylab Student Project experiments began with the participation of flight operations personnel on the National Science Teachers Association Selection Board and ended with the performance of the student experiments by the Skylab flightcrews. The operational criteria used during the compatibility analysis to determine which of the 25 national winners could be flown on board the Skylab vehicle are reviewed, the factors involved in the assignment of the experiments to Skylab missions are discussed, the activities associated with training the flightcrews in the operation of the student experiments are described, and the actual performance of the experiments during the mission and the associated ground operations in the Mission Control Center are detailed.

Macleod, J. B.↗
NASA NTRS1979

Concept for a large multi-mission amphibian aircraft

A very large aircraft has been proposed for meeting both civil cargo and military transport needs for 1995 and beyond. The concept includes a wide noncircular fuselage cross section with a low wing, thick inner wing section, fuselage-mounted engines, and an air cushion landing gear. The civil freighter operates independently of congested passenger airports, using sheltered water as a runway and a waterfront land site for parking and ground operations. The military transport can operate from a wide variety of surfaces and temporary bases. The air cushion landing gear weighs substantially less than conventional gear and permits the use of extended takeoff distance resulting in improved payload/gross weight ratio.

Vaughan, J. C., III↗
NASA NTRS2015

Optimizing Integrated Arrival, Departure and Surface Operations Under Uncertainty

In airports and surrounding terminal airspaces, the integration of arrival, departure and surface scheduling and routing have the potential to improve the operations efficiency. Recent research had developed mixed-integer-linear programming algorithm-based scheduler for integrated arrival and departure operations in the presence of uncertainty. This paper extends to the surface previous research performed by the authors to integrate taxiway and runway operations. The developed algorithm is capable of computing optimal aircraft schedules and routings that reflects the integration of air and ground operations. A preliminary study case is conducted for a set of thirteen aircraft evolving in a model of the Los Angeles International airport and surrounding terminal areas. Using historical data, a representative traffic scenario is constructed and probabilistic distributions of pushback delay and arrival gate delay are obtained. To assess the benefits of optimization, a First- Come-First-Serve algorithm approach comparison is realized. Evaluation results demonstrate that the optimization can help identifying runway sequencing and schedule that reduce gate waiting time without increasing average taxi times.

Bosson, Christabelle↗
NASA NTRS1996

Building the Traffic, Navigation, and Situation Awareness System (T-NASA) for Surface Operations

We report the results of a part-task simulation evaluating the separate and combined effects of an electronic moving map display and newly developed HUD symbology on ground taxi performance, under moderate- and low-visibility conditions. Twenty-four commercial airline pilots carried out a series of 28 gate-to-runway taxi trials at Chicago O'Hare. Half of the trials were conducted under moderate visibility (RVR 1400 ft), and half under low visibility (RVR 700 ft). In the baseline condition, where navigation support was limited to surface features and a Jeppesen paper map, navigation errors were committed on almost half of the trials. These errors were virtually abolished when the electronic moving map or the HUD symbology was available; in addition, compare, the baseline condition, both forms of navigation aid yielded an increase in forward taxi speed. The speed increase was greater for HUD than the electronic moving map, and greater under low visibility than under moderate visibility. These results suggest that combination of electronic moving map and HUD symbology has the potential to greatly increase the efficiency of ground operations, particularly under low-visibility conditions.

McCann, Robert S.↗
NASA NTRS1973

Space tug point design study. Volume 2: Operations, performance and requirements

A design study to determine the configuration and characteristics of a space tug was conducted. Among the subjects analyzed in the study are: (1) flight and ground operations, (2) vehicle flight performance and performance enhancement techniques, (3) flight requirements, (4) basic design criteria, and (5) functional and procedural interface requirements between the tug and other systems.

Source record↗
NASA NTRS1991

The real-time operations of the Space Shuttle Orbiter during rendezvous and proximity operations

The Space Shuttle Orbiter is the only U.S. spacecraft in operation today that routinely performs an orbital rendezvous with another spacecraft. The trajectory planning and training of both flight crews and ground operations personnel required to achieve a 100 percent success rate is considerable. The preflight planning and training can be reduced through very simple design considerations of a new space vehicle.

Dougherty, Andrew↗
NASA NTRS2018

SAM 3.0 Workshop Alliance SV Lab

Nissan is building a Seamless Autonomy Mobility (SAM) which is a cloud-based system of artificial intelligence that manages a fleet of autonomous vehicles. It pairs artificial intelligence with human intelligence in order to create a seamless solution that allows autonomous drive to be viable and marketable. They have created a Mobility Manager function which is a laborer who executed human-in-the-loop functions within SAM system. Nissan invited the HAT Lab to discuss NASA's lessons learned on remote operator support and to participate in a workshop discussion of one of their use cases. This presentation covers some of the HAT Lab's work on a human-autonomy teaming Agent and previous Reduced Crew Operations ground station development.

Human-Autonomy Teaming↗
NASA NTRS1999

Studies of Florida Thunderstorms Using LDAR, LLP, and Single Doppler Radar Data

The paper summarizes results from research conducted on thunderstorms in the vicinity of the Kennedy Space Center (KSC) Florida, between 1993 and 1998. The focus of the research was to identify procedures that would assist weather forecasters at the Cape Canaveral Air Station (CCAS) in real-time detection and forecasting of the lightning threat to launches and daily ground operations at KSC/CCAS sites. The research was divided into three topics: (1) studies aimed at improving the forecasting of the initial cloud-ground (CG) lightning threat, (2) studies aimed at improving the forecasting of the end-of-storm termination of the CG lightning threat, and (3) studies of the location of CG strikes relative to the thunderstorm radar echo and to lightning discharges aloft. Only the first two topics are covered in this preprint.

Forbes, Gregory S.↗
NASA NTRS2006

Method for Controlling Space Transportation System Life Cycle Costs

A structured, disciplined methodology is required to control major cost-influencing metrics of space transportation systems during design and continuing through the test and operations phases. This paper proposes controlling key space system design metrics that specifically influence life cycle costs. These are inclusive of flight and ground operations, test, and manufacturing and infrastructure. The proposed technique builds on today's configuration and mass properties control techniques and takes on all the characteristics of a classical control system. While the paper does not lay out a complete math model, key elements of the proposed methodology are explored and explained with both historical and contemporary examples. Finally, the paper encourages modular design approaches and technology investments compatible with the proposed method.

McCleskey, Carey M.↗
NASA NTRS2017

Concept of Operations for RCO SPO

Reduced crew operations (RCO) refers to the reduction of crew members flying long-haul or military operations with more than one pilot onboard. Single pilot operations (SPO) refers to flying a commercial transport aircraft with only one pilot on board the aircraft, assisted by advanced onboard automation andor ground operators providing piloting support services. Properly implemented, RCO/SPO could provide operating cost savings while maintaining a level of safety no less than conventional two-pilot commercial operations. A concept of operations (ConOps) for any paradigm describes the characteristics of its various components and their integration in a multi-dimensional design space. This paper presents key options for humanautomation function allocation being considered by NASA in its ongoing development of RCO/SPO ConOps.

ConOps↗
NASA NTRSDate not supplied

Operational Health Physics for Radiation Source Payloads

Spacecraft payloads processed at the Kennedy Space Center (KSC) frequently include ionizing and nonionizing radiation sources that require controls to protect the health of the workers involved in the ground operations. At KSC, a robust radiation protection program ensures that radiation hazards are identified, and appropriate controls are implemented using a radiation use authorization (RUA) process and Radiation Protection Committee review and approval. The Health Physics Office provides monitoring and oversight to ensure compliance. A brief overview of health physics activities in support of the Mars 2020 mission will be described to illustrate the overall management of radiation sources during payload ground processing.

Kurt R Geber↗