SEARCH · Search NASA

Results for “Grounding line”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

All sources NASA NTRS DOE OSTI

NASA NTRS1973

Magnetospheric plasma motion during a sudden commencement.

A sudden commencement occurred at 2348 UT on Feb. 15, 1967, when the ATS-1 satellite was about 2 hr past local noon at a geocentric distance of 6.6 earth radii. Plasma was observed by the Suprathermal Ion Detector first to flow in the antisolar direction, as expected, but then to flow westward, for about 2 min, at about 50 km/sec. Analysis of ground magnetograms suggests that the surprising westward flow, which must have involved an electric field of about 10 mV/m at 6.6 earth radii, resulted from the ionosphere's reaction to the sudden commencement. Beginning about 2 min before the start of the westward flow at ATS-1, ground magnetometers near the foot of the ATS-1 field line typically recorded magnetic-field deflections of about 70 gamma, to the northeast. Taking the ground observations, assuming a height-integrated Hall conductivity of 1 mho, and a standoff distance of 7.2 earth radii inferred from Explorer 33 solar-wind data, a magnetospheric electric field is derived which agrees in magnitude and direction with that required to produce the observed flow at ATS-1.

Lin, C.-A.↗

NASA NTRS1965

Attenuation of Sinusoidal Perturbations Superimposed on Laminar Flow of a Liquid in a Long Line

The attenuation constant for sinusoidal pressure and flow perturbations superimposed on the laminar flow of a viscous liquid was measured in a system consisting of a long, straight, cylindrical hydraulic line. The upstream and downstream ends of the line were securely fastened t o the ground. A sinusoidal perturbation was imposed on the mean flow at the upstream end by means of a s m a l l oscillation of a throttle valve abmt a partly open mean position. The downstream end was terminated in a restricting orifice. Pressure perturbations were measured at three locations along the line for frequencies from 15 t o 100 cps. These pressure measurements were reduced by use of a pair of complex damped acoustic one-dimensional wave equations to obtain the attenuation constant along with the phase constant and the dimensionless downstream admittance. For the range of frequencies investigated, the experimental values of the attenuation constant are in good agreement with classical theory.

PERTURBATION↗

NASA NTRS1982

A model of a sunspot chromosphere based on OSO 8 observations

OSO 8 spectrometer observations of the H I, Mg II, and Ca II resonance lines of a large quiet sunspot during November 16-17, 1975, along with a C IV line of that event obtained by a ground-based spectrometer, are analyzed together with near-simultaneous ground-based Stokes measurements to yield an umbral chromosphere and transition region model. Features of this model include a chromosphere that is effectively thin in the resonance lines of H I and Mg II, while being saturated in Ca II, and an upper chromospheric structure similar to that of quiet-sun models. The similarity of the upper chromosphere of the sunspot umbra to the quiet-sun chromosphere suggests that the intense magnetic field plays only a passive role in the chromospheric heating mechanism, and the observations cited indicate that solar-type stars with large areas of ordered magnetic flux would not necessarily exhibit extremely active chromosphere.

Lites, B. W.↗

NASA NTRS2011

Lidar Systems for Precision Navigation and Safe Landing on Planetary Bodies

The ability of lidar technology to provide three-dimensional elevation maps of the terrain, high precision distance to the ground, and approach velocity can enable safe landing of robotic and manned vehicles with a high degree of precision. Currently, NASA is developing novel lidar sensors aimed at needs of future planetary landing missions. These lidar sensors are a 3-Dimensional Imaging Flash Lidar, a Doppler Lidar, and a Laser Altimeter. The Flash Lidar is capable of generating elevation maps of the terrain that indicate hazardous features such as rocks, craters, and steep slopes. The elevation maps collected during the approach phase of a landing vehicle, at about 1 km above the ground, can be used to determine the most suitable safe landing site. The Doppler Lidar provides highly accurate ground relative velocity and distance data allowing for precision navigation to the landing site. Our Doppler lidar utilizes three laser beams pointed to different directions to measure line of sight velocities and ranges to the ground from altitudes of over 2 km. Throughout the landing trajectory starting at altitudes of about 20 km, the Laser Altimeter can provide very accurate ground relative altitude measurements that are used to improve the vehicle position knowledge obtained from the vehicle navigation system. At altitudes from approximately 15 km to 10 km, either the Laser Altimeter or the Flash Lidar can be used to generate contour maps of the terrain, identifying known surface features such as craters, to perform Terrain relative Navigation thus further reducing the vehicle s relative position error. This paper describes the operational capabilities of each lidar sensor and provides a status of their development. Keywords: Laser Remote Sensing, Laser Radar, Doppler Lidar, Flash Lidar, 3-D Imaging, Laser Altimeter, Precession Landing, Hazard Detection

Amzajerdian, Farzin↗

NASA NTRS1981

Boron and beryllium in Gamma Geminorum

Observations have been made of the B II resonance line at 1362 A in the A0 IV star Gamma Gem with the Princeton spectrometer on the Copernicus satellite at a spectral resolution of 0.05 A. Complementary ground-based observations of the Be II resonance lines at 3130 and 3131 A have been made at Mauna Kea Observatory with a comparable resolution. A model-atmosphere abundance analysis has been done which includes the effects of the lines that blend with the B II and Be II lines. Previous data on Alpha Lyr and Alpha CMa for B II (which blends with a V III feature) have been reanalyzed with the help of new photographic and Reticon data from Mauna Kea which enable the determination of the V abundance. The results show that Gamma Gem is depleted in B by a factor of 5-10 relative to Alpha Lyr and other normal B stars and depleted in Be by at least a factor of four. By comparison, the hot Am star Alpha CMa is B-deficient by about three orders of magnitude and Be-deficient by at least fifteen times. It is suggested that the abundance deficiencies are due to diffusion, and that Alpha CMa is intrinsically a slow rotator, and Gamma Gem is a slightly evolved slow rotator where some, but not all, of the B and Be has resurfaced.

Boesgaard, A. M.↗

NASA NTRS1973

Correlation of ERTS MSS data and earth coordinate systems

Experience has revealed a problem in the analysis and interpretation of ERTS multispectral scanner (MSS) data. The problem is one of accurately correlating ERTS MSS pixels (picture elements) with analysis areas specified on aerial photographs or topographic maps for training recognition computers and/or evaluating recognition results. A computer-aided procedure to correlate coordinates from topographic maps and/or aerial photographs with ERTS data coordinates has been developed. In the procedure, a map transformation from earth coordinates to ERTS scan line and point numbers is calculated using selected ground control points and the method of least squares. The map transformation is then applied to the earth coordinates of selected areas to obtain the corresponding ERTS point and line numbers.

Malila, W. A.↗

NASA NTRS1981

Differential absorption lidar measurements of atmospheric temperature and pressure profiles

The theory and methodology of using differential absorption lidar techniques for the remote measurement of atmospheric pressure profiles, surface pressure, and temperature profiles from ground, air, and space-based platforms are presented. Pressure measurements are effected by means of high resolution measurement of absorption at the edges of the oxygen A band lines where absorption is pressure dependent due to collisional line broadening. Temperature is assessed using measurements of the absorption at the center of the oxygen A band line originating from a quantum state with high ground state energy. The population of the state is temperature dependent, allowing determination of the temperature through the Boltzmann term. The results of simulations of the techniques using Voigt profile and variational analysis are reported for ground-based, airborne, and Shuttle-based systems. Accuracies in the 0.5-1.0 K and 0.1-0.3% range are projected.

Korb, C. L.↗

NASA NTRS1983

Line positions and strengths in the /001/, /110/, and /030/ bands of HDO

A Fourier transform spectrometer of 0.01/cm resolution has been used to study the vibration-rotation spectrum of HDO in the 3250-4370/cm region, and a nonlinear least squares fitting technique has been employed in measurements of the strengths, positions and pressure-broadening parameters of over 1400 lines. In addition to determining values of both the ground state levels and levels in the (001), (110), and (030) states, an analysis is undertaken of the strengths of 953 lines in order to establish band strengths, F factor coefficients, and Fermi interaction parameters. Detailed results are presented in tabular form.

Toth, R. A.↗

NASA NTRS2013

An Outburst Scenario for the X-ray Spectral Variability in 3C 111

We present a combined Suzaku and Swift BAT broad-band E=0.6-200 keV spectral analysis of three 3C 111 observations obtained in 2010. The data are well described with an absorbed power-law continuum and a weak (R approximately equal to 0.2) cold reflection component from distant material. We constrain the continuum cutoff at E(sub C) approximately equal to 150- 200 keV, which is in accordance with X-ray Comptonization corona models and supports claims that the jet emission is only dominant at much higher energies. Fe XXVI Ly alpha emission and absorption lines are also present in the first and second observations, respectively. The modelling and interpretation of the emission line is complex and we explore three possibilities. If originating from ionized disc reflection, this should be emitted at r(sub in) greater than or equal to 50 r(sub g) or, in the lamp-post configuration, the illuminating source should be at a height of h greater than or equal to 30 r(sub g) over the black hole. Alternatively, the line could be modeled with a hot collisionally ionized plasma with temperature kT = 22.0(sup +6.1)(sub −3.2) keV or a photo-ionized plasma with logXi=4.52(sup +0.10)(sub −0.16) erg per second cm, and column density N(sub H) greater than 3×10(sup 23) per square centimeter. However, the first and second scenarios are less favored on statistical and physical grounds, respectively. The blue-shifted absorption line in the second observation can be modelled as an ultra-fast outflow (UFO) with ionization parameter logXi=4.47(sup +0.76) (sub −0.04) erg per second cm, column density NH=(5.3(sup +1.8)(sub −1.3))×10(sup 22) per square centimeter and outflow velocity v(sub out) = 0.104+/-0.006c. Interestingly, the parameters of the photoionized emission model remarkably match those of the absorbing UFO, supporting the possibility that the same material could be responsible for both emission and absorption. We suggest an outburst scenario in which an accretion disc wind, initially lying out of the line of sight and observed in emission, then crosses our view to the source and it is observed in absorption as a mildly-relativistic UFO.

Outburst↗

NASA NTRS1973

Correlation of ERTS MSS data and earth coordinate systems

The author has identified the following significant results. Experience has revealed a problem in the analysis and interpretation of ERTS-1 multispectral scanner (MSS) data. The problem is one of accurately correlating ERTS-1 MSS pixels with analysis areas specified on aerial photographs or topographic maps for training recognition computers and/or evaluating recognition results. It is difficult for an analyst to accurately identify which ERTS-1 pixels on a digital image display belong to specific areas and test plots, especially when they are small. A computer-aided procedure to correlate coordinates from topographic maps and/or aerial photographs with ERTS-1 data coordinates has been developed. In the procedure, a map transformation from earth coordinates to ERTS-1 scan line and point numbers is calculated using selected ground control points nad the method of least squares. The map transformation is then applied to the earth coordinates of selected areas to obtain the corresponding ERTS-1 point and line numbers. An optional provision allows moving the boundaries of the plots inward by variable distances so the selected pixels will not overlap adjacent features.

Malila, W. A.↗

NASA NTRS2010

Operational Lessons Learned from the Ares I-X Flight Test

The Ares I-X flight test, launched in 2009, is the first test of the Ares I crew launch vehicle. This development flight test evaluated the flight dynamics, roll control, and separation events, but also provided early insights into logistical, stacking, launch, and recovery operations for Ares I. Operational lessons will be especially important for NASA as the agency makes the transition from the Space Shuttle to the Constellation Program, which is designed to be less labor-intensive. The mission team itself comprised only 700 individuals over the life of the project compared to the thousands involved in Shuttle and Apollo missions; while missions to and beyond low-Earth orbit obviously will require additional personnel, this lean approach will serve as a model for future Constellation missions. To prepare for Ares I-X, vehicle stacking and launch infrastructure had to be modified at Kennedy Space Center's Vehicle Assembly Building (VAB) as well as Launch Complex (LC) 39B. In the VAB, several platforms and other structures designed for the Shuttle s configuration had to be removed to accommodate the in-line, much taller Ares I-X. Vehicle preparation activities resulted in delays, but also in lessons learned for ground operations personnel, including hardware deliveries, cable routing, transferred work and custodial paperwork. Ares I-X also proved to be a resource challenge, as individuals and ground service equipment (GSE) supporting the mission also were required for Shuttle or Atlas V operations at LC 40/41 at Cape Canaveral Air Force Station. At LC 39B, several Shuttle-specific access arms were removed and others were added to accommodate the in-line Ares vehicle. Ground command, control, and communication (GC3) hardware was incorporated into the Mobile Launcher Platform (MLP). The lightning protection system at LC 39B was replaced by a trio of 600-foot-tall towers connected by a catenary wire to account for the much greater height of the vehicle. Like Shuttle, Ares I-X will be stacked on a MLP and rolled out to the pad on a Saturn-era crawler-transporter. While Ares I-X was only held in place by the four hold-down posts on its aft skirt during rollout, a new vehicle stabilization system (VSS) attached to the vertical service structure kept the vehicle from undue swaying prior to launch at the pad, LC 39B. Following the launch, the flight test vehicle first stage was recovered with the aid of new parachutes resized to accommodate the five-segment-long first stage, which had a much greater length and mass than the Shuttle s reusable solid rocket boosters. After splashdown, recovery divers exercised extra care when handling the first stage to ensure that the flight data recorders in the fifth segment simulator were not damaged by exposure to sea water. The data recovered from the Ares I-X flight test will be very valuable in verifying the predicted environments and models used to design the vehicle. Lessons learned from Ares I-X will be shared with the Ares Projects through written and verbal reports and through integration of mission team members into the Project workforce.

Davis, Stephan R.↗

NASA NTRS1975

The rocket ultraviolet spectrum of the planetary nebula NGC 7027

An ultraviolet spectrum of NGC 7027 was obtained with a rocket-borne telescope. The observed fluxes are given on an absolute basis and upper limits are given for the strongest predicted lines which were not observed. The extinction correction was made on the basis of the observed and calculated line ratios for the hydrogenic recombination line of He 2 at 1640A to H beta. The extinction is in agreement with ground based determinations. When corrected for extinction the C 4 resonance line at 1549A is in good agreement with the intensity calculated from models, but the C 3 intercombination line at 1909A is a factor of ten too bright. The addition of dielectronic recombination to the models sufficiently changes the C 3 concentration to reduce the discrepancy to a factor of four. The abundance of carbon is assumed to be 2 x 0.0001 that of hydrogen. Using carbon abundances for the sun, this discrepancy disappears and there must be attenuation in the C 4 line. Since the optical depth is approximately 10,000 at the line center, no appreciable number of absorbing grains can exist in the C 4 producing region of the nebula.

Bohlin, R. C.↗

NASA NTRS1994

Use of multiple gauges and microwave attenuation of precipitation for satellite verification

In this paper both a microwave attenuation measurement along a horizontal line and multiple point gauge measurements are analyzed as possible ground-truth designs to validate satellite precipitation retrieval algorithms at the field of view spatial level (typically about 20 km). The design consists of comparing a sequence of pairs of contemporaneous measurements taken from the ground and from space. The authors examine theoretically the variance of expected differences between the two systems. The line average measurement leads to a smaller mean-square error compared to the case of a single point gauge, since some of the small-scale variability of the rain field is smoothed away by the line integration. The multiple point gauge measurements also give smaller mean-square error than that of a single point gauge. The centroid of the line and point gauge configurations are considered to be located randomly inside the field of view for different overpasses. A space-time spectral formalism is used with a noise-forced diffusive rain field to find the mean-square error. By considering instantaneous ground and satellite measurement pairs over about 50 visits when raining, we can reduce the expected error to approximately 10% of the standard deviation of climatological variability. This is considered to be a useful level of tolerance for identifying biases in the retrieval algorithms. It is found that the multiple point gauges (especially two gauges) are the economical ground-truth design compared to the microwave attenuation based on the mean-square error comparison. The major finding of this study is that a significant improvement over the point gauge is obtained by adding a single additional piece of information; adding more gauges or extending the line of attenuation is not an important improvement.

Ha, Eunho↗

NASA NTRS1973

Remote monitoring of soil moisture using airborne microwave radiometers

The current status of microwave radiometry is provided. The fundamentals of the microwave radiometer are reviewed with particular reference to airborne operations, and the interpretative procedures normally used for the modeling of the apparent temperature are presented. Airborne microwave radiometer measurements were made over selected flight lines in Chickasha, Oklahoma and Weslaco, Texas. Extensive ground measurements of soil moisture were made in support of the aircraft mission over the two locations. In addition, laboratory determination of the complex permittivities of soil samples taken from the flight lines were made with varying moisture contents. The data were analyzed to determine the degree of correlation between measured apparent temperatures and soil moisture content.

Kroll, C. L.↗

NASA NTRS1986

Excitation of O(1D) atoms in aurorae and emission of the forbidden OI 6300-A line

The electron aurora leads to six processes capable of exciting the O(1D2) metastable state of the atomic-oxygen ground-state configuration, the parent state of the 6300-A red line. Altitude profiles of the volume emission rate resulting from each process are computed for Maxwellian electron spectra with characteristic energies between 0.1 and 2.0 keV. Since each process peaks at a different altitude, the sum or total volume emission rate extends over a wide altitude range. Measurements of 6300-A emission obtained by rocket and satellite-borne instruments are summarized, and it is shown that the chemical reaction of N(2D) with O2 is the major source of O(1D) atoms in the electron aurora. New calculations of the 6300-A:4728-A column emission-rate ratio are presented for a range of characteristic energies in an assumed Maxwellian electron spectrum. An approximate equation for the red-line emission per unit energy input is given as a function of electron-spectrum characteristic energy.

Rees, M. H.↗

NASA NTRSDate not supplied

A Compact Dual-Band Bowtie Antenna for RF and ISM bands Operation

Traditionally, bowtie antennas have been known to exhibit wide impedance characteristics, omnidirectional radiation patterns, and linear polarization. There is a broad range of applications from medical imaging, archaeological survey, and Ground Penetrating Radar (GPR) to trackers and sensor networks where wideband bowtie antenna designs are required for their operations. Broadening the bandwidth of bowtie antenna requires widening the flare angle of the bowtie arms, which consequently results in a large surface area that may not be suitable for space-constrained applications. Moreover, drawback attributes of the wideband bowtie designs feature inconsistent radiation pattern across the bandwidth and low signal-to-noise (SNR) ratios. As it is known, the SNR would be improved in dual- or multi-band antennas due to their reduced bandwidth. To this end, dual-band/multi-band antennas are preferred over wideband antennas in applications where more than a single frequency of interest is present. Previously, a two-port double-dipole elements was reported, whose arms were orthogonally interleaved to facilitate operation in both the standard WLAN frequency bands (J. M. Steyn and et. al, Progress in Electromagnetic Research, Vol. – 10 pp. 151-161). Even though the antenna is not very compact it does exhibit good cross-polarization, moderate gain in both frequency bands. Another dual-band bowtie antenna which excites two bands using a single transmission line was reported (Wen Chao Zheng and et. al, IEEE Trans. Antennas propag., 2014). The design was compact and did not need multi-port feeding network. In this paper, a dual-band compact bowtie antenna operating at 900 MHz (RF band) and 2.45 GHz (ISM band) using a single excitation port is introduced. It is printed on a 1.54mm thick dielectric substrate (εr = 3.38). The antenna consists of two sets of bowtie arms, a microstrip transmission line to feed the bowtie arms, and a ground plane acting as a reflector to partially reduce the back radiation. One of the bowtie arms of each frequency is printed on the top layer and the other arm, which is mirror imaged, is printed on the bottom layer of the substrate. The length of the bowtie controls the resonance frequency of the antenna and the flare angle controls the bandwidth of the antenna. The microstrip transmission line, connected to a 50 Ω SMA probe, feeds the bowtie antenna. The compact antenna can be used for both RF and ISM band applications. The bowtie arms at the lower frequency band are miniaturized by elongating their electrical lengths. The influence of miniaturizing the bowtie arms and the supporting partial ground plane is observed in the reduced peak gain and degraded front-to-back ratio. These are partly neutralized using four quarter-wave choke-slots in the ground plane with two on each side of the feeding transmission line. The proposed antenna is numerically investigated and finalized by the finite-element based full-wave EM solver, ANSYS HFSS. The miniaturization has reduced the ground plane size by ~45% and the arms size by ~41%. In addition to the size reduction benefits, the antenna shows reasonable peak gain and front-to-back ratio in both the bands. The corresponding results will be presented and discussed at the conference.

Saininad Naik↗

NASA NTRS1985

All-aluminum optical system for a large cryogenically cooled far infrared echelle spectrometer

In the past few years, NASA's Kuiper Airborne Observatory (KAO) has made it possible to conduct pioneering observations of far infrared lines from astronomical sources. Such observations, in the case of wavelengths in the approximate range from 20 to 350 microns, cannot be performed from ground-based sites, because of telluric water absorption effects. Lines in the considered range provide information about the interstellar gas in molecular, neutral atomic, and ionized form of occurrence. The present paper provides a description of the development of the cryogenic optical system of a spectrometer designed to exploit the potential of the KAO for observing the far infrared lines. Attention is given to design goals and considerations, details of optical design, the fabrication of the optical system, the cryostat, and performance.

Erickson, E. F.↗

NASA NTRS2011

Reconfigurable Microwave Phase Delay Element for Frequency Reference and Phase-Shifter Applications

A technique was developed to provide a reconfigurable high-precision micro - wave electrical phase delay for resonators and phase shifters. The invention employs multiple branches of transmission lines with open-ended or ground-ended terminations as configurable bits or digits. This technique minimizes the errors due to limited precision of switching devices. In addition, the proposed linear analytical approach significantly produces a much simpler design than that of other prior inventions at the time of this reporting. Microwave components such as filters, phase delay elements, or resonators require a method that can accurately adjust their frequency responses. Most tuning techniques offer very wide frequency tuning range; however, it is often difficult and expensive to tune their response in a very narrow operating frequency, especially when the tuning element reaches its minimum discrete step due to fabrication tolerances. The problem becomes worse as the operating frequency is in mm-wave frequency range (>26 GHz). The electrical tuning sensitivity of a microwave line is dependent on the position of the tuning element with respect to the reference termination. By placing this tuning element away from this reference with the main transmission line connecting the two elements together the sensitivity of the tuning element can change significantly. This concept can be used in the system that requires multiple tuning sensitivities. In this case, multiple tuning branches are superimposed in the main transmission line. The proposed invention allows the transmission-line electrical length to be accurately programmed using switching elements that have limited accuracy. The invention consists of multiple branches of transmission lines connected to discrete switching devices with open-ended terminations. They are used as discrete tuning elements. These elements are connected to the main microwave transmission line and are separated by a well-defined electrical degree spacing. Each branch is programmed to have different electrical degree sensitivity, such as a combination of discrete steps in each branch, which results in a reflective line with a unique effective phase response. To reduce the number of switching devices, it is desirable to program the devices in binary configuration where each branch represents one bit in the base-2 number system. This invention allows the transmission line electrical length to be tuned precisely with customizable sensitivity based on the known sensitivity of the base tuning circuit. The tuning resolution is dependent on the distance among tuning branches.

Hsieh, Wen-Ting↗