Search NASA⌕ Search

SEARCH · Search NASA

Results for “INTERPRETATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

An interpretation of the polarization of microwave bursts

High-spatial-resolution (a few seconds of arc) observations of microwave bursts have demonstrated that only the impulsive phase of the burst is polarized; one observes only one polarity in the burst source if it is weak (Alissandrakis and Kundu) and both polarities if it is intense (Enome et al.). These results are interpreted in terms of an asymmetrical bipolar field structure of the loop in which the energetic electrons responsible for the radiation are contained. The role of unequal field strengths at the feet of the loop on the number of electrons trapped and their pitch angle distribution are discussed in a specific model. Computations of the polarized intensity originating from each foot of the loop seem to be consistent with the observations at present available.

Kundu, M. R.↗

Map-guided interpretation of remotely-sensed imagery

A map-guided approach to interpretation of remotely sensed imagery is described, with emphasis on applications involving continuous monitoring of predetermined ground sites. Geometric correspondence between a sensed image and a symbolic reference map is established in an initial stage of processing by adjusting parameters of a sensor model so that image features predicted from the map optimally match corresponding features extracted from the sensed image. Information in the map is then used to constrain where to look in an image and what to look for. With such constraints, previously intractable remote sensing tasks can become feasible, even easy, to automate. Four illustrative examples are given, involving the monitoring of reservoirs, roads, railroad yards, and harbors.

Tenenbaum, J. M.↗

Manual interpretation of LANDSAT data

The task of the analyst throughout LACIE phases 1 and 2 consisted of outlining representative areas (fields) for all spectral classes within a segment on the basis of their appearance on the LANDSAT image products, and then labeling the crop type (wheat/nonwheat) within the selected training areas. For LACIE phase 3, a procedure was developed and implemented which incorporated clustering for spectral class definition and training statistics generation. The only analyst's task was crop type identification. The logical processes involved in interpretation are described, rather than a step-by-step description of analyst procedures.

Hay, C. M.↗

LACIE analyst interpretation keys

Two interpretation aids, 'The Image Analysis Guide for Wheat/Small Grains Inventories' and 'The United States and Canadian Great Plains Regional Keys', were developed during LACIE phase 2 and implemented during phase 3 in order to provide analysts with a better understanding of the expected ranges in color variation of signatures for individual biostages and of the temporal sequences of LANDSAT signatures. The keys were tested using operational LACIE data, and the results demonstrate that their use provides improved labeling accuracy in all analyst experience groupings, in all geographic areas within the U.S. Great Plains, and during all periods of crop development.

Baron, J. G.↗

Image and numerical display aids for manual interpretation

Four color image display techniques, developed to aid in interpreting LANDSAT imagery, are described. These are the cluster image, the principal component transformation, the principal component greenness transformation, and the color-coded spectral plot. Experimental results show that the four techniques are useful in selecting and/or identifying representative samples of signatures in a given LANDSAT scene.

Abotteen, R. A.↗

A programmed labeling approach to image interpretation

Manual labeling techniques require the analyst-interpreter to use not only production film converter products but also agricultural and meteorological data and spectral aids in an integrated, judgmental fashion. To control an anticipated high variance in these techniques, a semiautomatic labeling technology was developed. The product of this technology is label identification from statistical tabulation (LIST) which operates from a discriminant basis and has the ability to measure the reliability of the label and to introduce an arbitrary bias. The development of LIST and its properties are described. Numerical results of an application are included and the evaluation of LIST is discussed.

Pore, M. D.↗

Serenitatis multi-ringed basin - Regional geology and basin ring interpretation

New topographic data allow a reassessment of the ring structure and distribution of facies of the Serenitatis basin (SB) and correlation with the younger and essentially same-size Orientale basin. Three major rings of the main (southern) SB are mapped: the Linne ring, outlined by mare ridges, average diameter 420 km; the Haemus ring, outlined by basin-facing scarps and massifs with crenulated borders, 610 km; and the Vitruvius ring, outlined by basin-facing linear scarps and massifs, 880 km. The second ring is interpreted as the rim of the transient cavity, while Serenitatis ejecta should be present in significant amounts at the junction of the Serenitatis and Imbrium third rings. The new reconstruction indicates that portions of the SB are better preserved than previously thought, consistent with recent stratigraphic and sample studies that suggest an age (as young as 3.87 plus or minus 0.04 b.y.) for SB which is older than, but close to, the time of formation of the Imbrium basin.

Head, J. W., III↗

Interpretation of the shape factor at Ootacamund, India

The paper deals with equatorial ATS-6 measurements of the shape factor, F, interpreted in terms of the shape of the electron density profile along the ray path. The observed rapid increase in F at sunrise is attributed to EUV production of ionization in the E and F regions. The evening decrease is seen to result from an upward drift of the F region at sunset and the evening decay of the E and bottomside F regions. The nighttime peak, or plateau, is caused by gradual decrease of the electron density profile.

Donnelly, R. F.↗

Preliminary description and interpretation of Apollo 14 cores 14211/10

Core 14211/10 is a 2 cm-diameter double drive tube that was collected within the smooth plains area of the Apollo 14 landing site. Rock fragments in the core appear to be derived from the smooth plains area because the coring site is beyond ejecta range of Cone Crater and is within the expected continuous ejecta of two large craters in the plains. The characteristics of the glassy soil breccia zone between 12.5 and 15.5 cm indicate that this zone represents the bottom of a glass-lined crater. At least some of the dark agglutinate and glass-rich soils at the top of the core are mature, by FMR measurements, and show maturation interrelationships between particle types. Hence, this dark interval is interpreted as a gardened zone.

Nagle, J. S.↗

The influence of NO and ClO variations at twilight on the interpretation of solar occultation measurements

Measurement of short-lived photochemically-produced species in the stratosphere by solar occultation is difficult because the rapid variation of such species near the terminator introduces ambiguities in interpreting the measured absorption in terms of meaningful atmospheric abundances. These variations produce tangent path concentrations that are asymmetric relative to the tangent point, as opposed to the symmetrical distribution usually assumed in most inversion algorithms. Neglect of this asymmetry may yield an inverted profile that deviates significantly from the true sunset/sunrise profile. In the present paper, the influence of this effect on solar occultation measurements of ClO and NO is examined. The results show that average inhomogeneity factors, which measure the concentration variation along the tangent path and which can be calculated from a photochemical model, can indicate which species require more careful data analysis.

Boughner, R.↗

The effect of a nonuniform planetary albedo on the interpretation of earth radiation budget observations

The flux density measured at satellite altitude with a fixed field of view radiometer differs from the true flux density reflected by the earth-atmosphere system within the field of view of the radiometer. This difference is due to angular response characteristics of the radiometer, solid angle effects due to geometry, and angular reflectance effects of the earth-atmosphere system. All of these effects lead to uncertainties in the interpretation of instantaneous earth radiation budget measurements. The differences between the true flux density and the measured flux density are shown to be significant when the field of view of the radiometer is large and when the atmosphere has a nonuniform, or spatially dependent, reflectance (albedo). A simulation experiment is described whereby the scene within the field of view of a nadir looking sensor is divided into a large number of equal area elements, each of which reflects radiation with one of two different reflectance models (corresponding to cloud-free and cloudy areas). The conditional mean values of the measured flux density, given values of the true flux density, are shown to differ significantly from the conditional means of the inverse problem, that of finding the mean value of the true flux density given a value for the measured flux density. The differences between the true flux density and the measured flux density are examined as a function of satellite altitude, field of view of the radiometer and solar zenith angle (including the effects of a terminator within the field of view) for both Lambertian and non-Lambertian reflectance models.

King, M. D.↗

Quantitative interpretation of Great Lakes remote sensing data

The paper discusses the quantitative interpretation of Great Lakes remote sensing water quality data. Remote sensing using color information must take into account (1) the existence of many different organic and inorganic species throughout the Great Lakes, (2) the occurrence of a mixture of species in most locations, and (3) spatial variations in types and concentration of species. The radiative transfer model provides a potential method for an orderly analysis of remote sensing data and a physical basis for developing quantitative algorithms. Predictions and field measurements of volume reflectances are presented which show the advantage of using a radiative transfer model. Spectral absorptance and backscattering coefficients for two inorganic sediments are reported.

Shook, D. F.↗

Side-looking airborne radar image interpretation and geological mapping: Problems and results

Geological experiments and surveys conducted by BRGM and GDTA members to evaluate interest in SLAR image interpretation are summarized. Two surveys were selected for presentation: Les Vans (Massif central, France) and Guyana (South America). They have permitted a comparison between different types of SLAR: Goodyear, Motorola, JPL, and Vigie in term of lithological and structural applications. On the Les Vans test site conclusions reached concern radiometry, which is better on L-band imagery, polarization, HV being more useful than HH for geological mapping in an L-band system, wavelength and illuminations. Over Guyana, the use of Goodyear X-band SLAR enables satisfactory geological and structural mapping under heavy equatorial forest with cloud cover conditions. A differential program was developed for fracture filtering and image enhancement with a coherent light laser, and significant results were obtained.

Scanvic, J. Y.↗

Interpretation of satellite images of the Republic of Niger

Interpretations of LANDSAT pictures were carried out for an area located in the west of the Niger Republic in the geological, hydrogeological and pedological sectors. Checking of the extent of vegetation and use of the soils and effects of desertification for the purpose of yearly map making was carried out. The proposed control of land use may be optimized by the direct reception of LANDSAT data by the receiving station planned for Ouagadougou. Since that station will not be operating before 1983, the establishment of a mobile reception station in the Republic of Niger to enable the installation of the required control system is advised.

Bender, F.↗

Interpretation of postseismic deformation with a viscoelastic relaxation model

A viscoelastic relaxation model is used to interpret postseismic surface deformation for the large-magnitude Aleutian earthquakes of 1957 and 1965. The lithosphere and asthenosphere are modeled as elastic solids with an anomalous viscoelastic inclusion below the island arc volcanoes. It is found that the observed postseismic surface deformation is a corollary of the known island arc structure. A satisfactory fit to the uplift following the 1957 earthquake is found for a viscoelastic volume with 80-km width extending from a depth of 50 to 200 km.

Wahr, J.↗

Possible fluid dynamical interpretation of some reported features in the Jovian atmosphere

A fluid dynamical interpretation is presented of the two major types of disturbance found in the southern hemisphere of Jupiter by the Voyager 1 imaging data. The observed features always occur together, and consist of a compact elliptically shaped formation having an anticyclonic flow which is poleward of a pair of more elongated cyclonic structures, as in the Great Red Spot and the white ovals. It is noted that the anticyclonic features at 41 deg S may be described by the cnoidal wave solutions to the appropriate nonlinear evolution equation, and that flow patterns derived in the vicinity of the Great Red Spot and white ovals are strikingly similar to those obtained for the flow around a solitary wave of the type than can exist in a zonal flow such as that found in the Jupiter atmosphere. Results of computations in terms of solitary wave theory of flow fields in the atmospheric structure and zonal velocity profiles determined from Voyager infrared spectroscopy and radiometry data are then presented which show that the pattern must be a singular solitary wave mode, the east-west structure of which is best described by the Korteweg-de-Vries equation

Maxworthy, T.↗

Interplanetary gas. XXV - A solar wind and interplanetary magnetic field interpretation of cometary light outbursts

Possible relationships of cometary brightness outbursts with the solar wind and interplanetary magnetic field are examined. Two types of outburst are distinguished: those which involve a significant brightening of both the head and the tail in a comet with a conspicuous plasma tail (Class I), and those involving the brightening of the central condensation of a previously faint comet with no detectable plasma tail (Class II). Class I bursts, as exemplified by Comet Morehouse 1908c, are attributed to the generation in the head of enhanced amounts of ions and their injection into the tail shortly before it disconnects, with ionization provided by sector boundary crossings. Class II events, as exhibited by Comet P/Tuttle-Giacobini-Kresak 1973b, are interpreted as the result of the bombardment of the nucleus by disturbed solar wind near corotated high-speed streams and sector boundaries, leading to highly exothermic chemical reactions.

Niedner, M. B., Jr.↗

Influence of hydrogen chemisorption kinetics on the interpretation of hydrogen transport through iron membranes

The influence of a specific surface reaction on the transport of gas-phase hydrogen through iron membranes has been investigated on the basis of model calculations. The surface reaction involves an adsorbed molecular hydrogen precursor between the gas phase and the dissociated chemisorbed state. The calculations demonstrate that the surface reaction for the H2/Fe system makes significant contributions to the time delay associated with the transient hydrogen transport through iron membranes, even under conditions where the steady-state hydrogen transport is independent of the surface reaction. These contributions to the time delay are interpreted in terms of an effective diffusivity, which is a function of the pressure on the entrance side and the thickness of the membrane.

Shanabarger, M. R.↗