Search NASA⌕ Search

SEARCH · Search NASA

Results for “Inversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Inversion of limb radiance measurements - An operational algorithm

The limb radiance inversion radiometer (LRIR) and limb infrared monitor of the stratosphere (LIMS) experiments aboard the Nimbus 6 and 7 spacecraft have made observations of infrared emission by CO2, O3, H2O, HNO3, and NO2 at the earth's limb. This paper describes a method by which such measurements can be inverted to give vertical distributions of temperature and mixing ratios as functions of pressure. The simple and efficient approach was successfully applied to the LRIR data and subsequently in the initial assessment of the LIMS data. Inversion of synthetic data indicates the size of the errors to be expected as a result of the assumptions and instrumental errors. Retrievals of measured LIMS radiances are shown as examples and compared to in situ observations. The differences are comparable to those obtained with the more complex retrieval scheme used to process the LIMS archival products. Some problems are noted.

Bailey, P. L.↗
NASA NTRS1986

An inverse method for subcritical flows

An exact method is presented for two-dimensional subsonic flow within the limitations of the tangent gas approximation. While Woods (1961) studied these equations and proposed iterative methods for the solution of both the iterative and inverse problems, the inverse method here presented is noniterative and exact. It is shown that the direct Euler solution over the designed airfoil is very close to the input speed distribution, and that the constraints necessitated by upstream condition and closure requirements are easily incorporated.

Daripa, P. K.↗
NASA NTRS1986

Determining the general circulation of the ocean - A nonlinear inverse problem

The usual inversion procedures for determining the oceanic circulation take the density field as given. This does not explicitly account for the mismatch between the data (which are typically a single realization of the density field) and the circulation being estimated (which may be a time mean or some other smoothed quantity), but explicit consideration of the uncertainty of the density data renders the problem nonlinear, and new estimation methods have to be used. As an example, a nonlinear inversion is successfully applied here to the simple analytical model of Stommel and Veronis (1981). It is also shown that their linear procedure, if properly used, yields a much better result than they obtained.

Mercier, H.↗
NASA NTRS1986

ERBE data inversion

The Earth Radiation Budget Experiment (ERBE) involves the use of a system of three spacecraft with instrument packages for measuring the earth's radiation balance to an accuracy which has been unattainable in previous experiments. The experiment is to determine the monthly averaged radiant exitances at te 'top of the atmosphere' (TOA) over the earth with a resolution of 250 km. The realization of this goal requires the conduction of high accuracy measurements, and the computation of the instantaneous radiant exitances from these measurements. The operation involved in this computation is called an 'inversion'. A third requirement is related to the computation of the daily and monthly averaged regional values from the instantaneous values. A brief description is provided of the algorithms for the inversion of the measurements to TOA radiant exitances, taking into account also the techniques which are used to validate the methods and results.

Smith, G. L.↗
NASA NTRS1986

Inversion of 2 wavelength Lidar data for cloud properties

The inversion of the lidar equation to derive quantitative properties of the atmosphere has continued to present considerable difficulty. The results of a study in which Klett's procedure was utilized for the analysis of cloud backscatter measurements made simulataneously at two ruby lidar wavelengths (694nm,347nmm) are presented. With one lidar system a cloud is probed at the two wavelength and the backscatter measured simulataneously by separate receivers. As a result two sigma profiles which should differ only because the wavlength dependence of the scattering. Experimental data presented to demonstrate the effects and the implications of the applications of the inversion method will be discussed.

Pal, S. R.↗
NASA NTRS1987

Lewis inverse design code (LINDES): Users manual

The method of complex characteristics and hodograph transformation for the design of shockless airfoils was introduced by Bauer, Garabedian, and Korn and has been extended by the author to design subcritical and supercritical cascades with high solidities and large inlet angles. This new capability was achieved by introducing a new conformal mapping of the hodograph domain onto an ellipse and expanding the solution in terms of Chebyshev polynomials. A new computer code, the NASA Lewis inverse design code, was developed based on this idea. This new design code is an efficient method for the design of airfoils in cascade. In particular, the design of subcritical cascades of airfoils is a very fast, robust, and versatile process. The inverse design code can be made to interact with a turbulent boundary layer calculation to obtain airfoils with no separated flows at the design condition. This report is intended to serve as a users manual for this design code. Material previously reported by the author is included here for completeness and quick access to the user. The manual contains a description of the method followed by a discussion of the design procedure and examples. The input parameters necessary to run the code are then described and their default values given. Output listings corresponding to six different blade shapes designed with the code are given, as well as the necessary input data to reproduce the computer runs. The examples have been chosen to show that a wide range of applications can be covered with the code, ranging from supercritical propeller sections to wind tunnel turning vanes that can operate with a large inlet flow angle range.

Sanz, Jose M.↗
NASA NTRS1987

Inverse problems in the modeling of vibrations of flexible beams

The formulation and solution of inverse problems for the estimation of parameters which describe damping and other dynamic properties in distributed models for the vibration of flexible structures is considered. Motivated by a slewing beam experiment, the identification of a nonlinear velocity dependent term which models air drag damping in the Euler-Bernoulli equation is investigated. Galerkin techniques are used to generate finite dimensional approximations. Convergence estimates and numerical results are given. The modeling of, and related inverse problems for the dynamics of a high pressure hose line feeding a gas thruster actuator at the tip of a cantilevered beam are then considered. Approximation and convergence are discussed and numerical results involving experimental data are presented.

Banks, H. T.↗
NASA NTRS1987

Inversion of canopy reflectance models for estimation of vegetation parameters

One of the keys to successful remote sensing of vegetation is to be able to estimate important agronomic parameters like leaf area index (LAI) and biomass (BM) from the bidirectional canopy reflectance (CR) data obtained by a space-shuttle or satellite borne sensor. One approach for such an estimation is through inversion of CR models which relate these parameters to CR. The feasibility of this approach was shown. The overall objective of the research carried out was to address heretofore uninvestigated but important fundamental issues, develop the inversion technique further, and delineate its strengths and limitations.

Goel, Narendra S.↗
NASA NTRS1986

Behavior of inversion layers in 3C silicon carbide

A study on the field-induced surface-charge region in 3C silicon carbide (SiC) using 1 MHz capacitance-voltage (C-V) measurements at room temperature is here reported. A double column mercury probe was used on oxidized SiC substrates to form metal-oxide-semiconductor (MOS) structures. These structures were characterized in terms of the substrate doping profile, effective fixed oxide charge, and interface trap density. A distinctive feature of the MOS C-V curves from accumulation to inversion is that after going into deep depletion the capacitance rises to its equilibrium inversion level during the voltage sweep. Capacitance transient measurements indicate that the minority-carrier generation occurs at the SiO2/SiC interface.

Avila, R. E.↗
NASA NTRS1986

Elastic robot control - Nonlinear inversion and linear stabilization

An approach to the control of elastic robot systems for space applications using inversion, servocompensation, and feedback stabilization is presented. For simplicity, a robot arm (PUMA type) with three rotational joints is considered. The third link is assumed to be elastic. Using an inversion algorithm, a nonlinear decoupling control law u(d) is derived such that in the closed-loop system independent control of joint angles by the three joint torquers is accomplished. For the stabilization of elastic oscillations, a linear feedback torquer control law u(s) is obtained applying linear quadratic optimization to the linearized arm model augmented with a servocompensator about the terminal state. Simulation results show that in spite of uncertainties in the payload and vehicle angular velocity, good joint angle control and damping of elastic oscillations are obtained with the torquer control law u = u(d) + u(s).

Singh, S. N.↗
NASA NTRS1986

Synchrotron and inverse Compton emission from expanding sources in jets - Application to SS 433

The formalism for an expanding source is extended to include continuous injection of electrons and the production of X-rays by inverse Compton scattering of external photons and synchrotron-self-Compton scattering. The model is applied to the expanding nonthermal sources entrained in the jets of SS 433. These sources are found capable of producing both the flaring radio component and the X-ray fluxes only if the relativistic electrons and the magnetic field are far out of equipartition. If the expanding source in the jets is in equipartition, the X-rays may originate from a stationary source within the binary system, which is self-absorbed at radio frequencies and produces X-rays by inverse Compton scattering of optical photons from the binary.

Band, David L.↗
NASA NTRS1986

Inverse kinematic solution for near-simple robots and its application to robot calibration

This paper provides an inverse kinematic solution for a class of robot manipulators called near-simple manipulators. The kinematics of these manipulators differ from those of simple-robots by small parameter variations. Although most robots are by design simple, in practice, due to manufacturing tolerances, every robot is near-simple. The method in this paper gives an approximate inverse kinematics solution for real time applications based on the nominal solution for these robots. The validity of the results are tested both by a simulation study and by applying the algorithm to a PUMA robot.

Hayati, Samad A.↗
NASA NTRS1987

Inviscid transonic wing design using inverse methods in curvilinear coordinates

An inverse wing design method has been developed around an existing transonic wing analysis code. The original analysis code, TAWFIVE, has as its core the numerical potential flow solver, FLO30, developed by Jameson and Caughey. Features of the analysis code include a finite-volume formulation; wing and fuselage fitted, curvilinear grid mesh; and a viscous boundary layer correction that also accounts for viscous wake thickness and curvature. The development of the inverse methods as an extension of previous methods existing for design in Cartesian coordinates is presented. Results are shown for inviscid wing design cases in super-critical flow regimes. The test cases selected also demonstrate the versatility of the design method in designing an entire wing or discontinuous sections of a wing.

Gally, Thomas A.↗
NASA NTRS1987

Recursive inverse kinematics for robot arms via Kalman filtering and Bryson-Frazier smoothing

This paper applies linear filtering and smoothing theory to solve recursively the inverse kinematics problem for serial multilink manipulators. This problem is to find a set of joint angles that achieve a prescribed tip position and/or orientation. A widely applicable numerical search solution is presented. The approach finds the minimum of a generalized distance between the desired and the actual manipulator tip position and/or orientation. Both a first-order steepest-descent gradient search and a second-order Newton-Raphson search are developed. The optimal relaxation factor required for the steepest descent method is computed recursively using an outward/inward procedure similar to those used typically for recursive inverse dynamics calculations. The second-order search requires evaluation of a gradient and an approximate Hessian. A Gauss-Markov approach is used to approximate the Hessian matrix in terms of products of first-order derivatives. This matrix is inverted recursively using a two-stage process of inward Kalman filtering followed by outward smoothing. This two-stage process is analogous to that recently developed by the author to solve by means of spatial filtering and smoothing the forward dynamics problem for serial manipulators.

Rodriguez, G.↗
NASA NTRS1987

Comparing hard and soft prior bounds in geophysical inverse problems

In linear inversion of a finite-dimensional data vector y to estimate a finite-dimensional prediction vector z, prior information about X sub E is essential if y is to supply useful limits for z. The one exception occurs when all the prediction functionals are linear combinations of the data functionals. Two forms of prior information are compared: a soft bound on X sub E is a probability distribution p sub x on X which describeds the observer's opinion about where X sub E is likely to be in X; a hard bound on X sub E is an inequality Q sub x(X sub E, X sub E) is equal to or less than 1, where Q sub x is a positive definite quadratic form on X. A hard bound Q sub x can be softened to many different probability distributions p sub x, but all these p sub x's carry much new information about X sub E which is absent from Q sub x, and some information which contradicts Q sub x. Both stochastic inversion (SI) and Bayesian inference (BI) estimate z from y and a soft prior bound p sub x. If that probability distribution was obtained by softening a hard prior bound Q sub x, rather than by objective statistical inference independent of y, then p sub x contains so much unsupported new information absent from Q sub x that conclusions about z obtained with SI or BI would seen to be suspect.

Backus, George E.↗
NASA NTRS1988

Development of direct-inverse 3-D methods for applied aerodynamic design and analysis

Several inverse methods have been compared and initial results indicate that differences in results are primarily due to coordinate systems and fuselage representations and not to design procedures. Further, results from a direct-inverse method that includes 3-D wing boundary layer effects, wake curvature, and wake displacement are presented. These results show that boundary layer displacements must be included in the design process for accurate results.

Carlson, Leland A.↗
NASA NTRS1988

Recursive inversion of externally defined linear systems

The approximate inversion of an internally unknown linear system, given by its impulse response sequence, by an inverse system having a finite impulse response, is considered. The recursive least squares procedure is shown to have an exact initialization, based on the triangular Toeplitz structure of the matrix involved. The proposed approach also suggests solutions to the problems of system identification and compensation.

Bach, Ralph E., Jr.↗
NASA NTRS1988

Comparing hard and soft prior bounds in geophysical inverse problems

In linear inversion of a finite-dimensional data vector y to estimate a finite-dimensional prediction vector z, prior information about X sub E is essential if y is to supply useful limits for z. The one exception occurs when all the prediction functionals are linear combinations of the data functionals. Two forms of prior information are compared: a soft bound on X sub E is a probability distribution p sub x on X which describes the observer's opinion about where X sub E is likely to be in X; a hard bound on X sub E is an inequality Q sub x(X sub E, X sub E) is equal to or less than 1, where Q sub x is a positive definite quadratic form on X. A hard bound Q sub x can be softened to many different probability distributions p sub x, but all these p sub x's carry much new information about X sub E which is absent from Q sub x, and some information which contradicts Q sub x. Both stochastic inversion (SI) and Bayesian inference (BI) estimate z from y and a soft prior bound p sub x. If that probability distribution was obtained by softening a hard prior bound Q sub x, rather than by objective statistical inference independent of y, then p sub x contains so much unsupported new information absent from Q sub x that conclusions about z obtained with SI or BI would seen to be suspect.

Backus, George E.↗