Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ionic diffusivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Molecular Design of a Highly Stable Single-Ion Conducting Polymer Gel Electrolyte

Single-ion conducting (SIC) polymer electrolytes with a high Li transference number ( t Li + ) have shown the capability to enable enhanced battery performance and safety by avoiding liquid–electrolyte leakage and suppressing Li dendrite formation. However, issues of insufficient ionic conductivity, low electrochemical stability, and poor polymer/electrode interfacial contact have greatly hindered their commercial use. In this work, a Li-containing boron-centered fluorinated SIC polymer gel electrolyte (LiBFSIE) was rationally designed to achieve a high t Li + and high electrochemical stability. Owing to the low dissociation energy of the boron-centered anion and Li + , the as-prepared LiBFSIE exhibited an ionic conductivity of 2 × 10 –4 S/cm at 35 °C, which is exclusively contributed by Li ions owing to a high t Li + of 0.93. Both simulation and experimental approaches were applied to investigate the ion diffusion and concentration gradient in the LiBFSIE and non-cross-linked dual-ion systems. Typical rectangular Li stripping/plating voltage profiles demonstrated the uniform Li deposition assisted by LiBFSIE. The interfacial contact and electrolyte infiltration were further optimized with an in situ UV–vis-initiated polymerization method together with the electrode materials. By virtue of the high electrochemical stability of LiBFSIE, the cells achieved a promising average Coulombic efficiency of 99.95% over 200 cycles, which is higher than that of liquid–electrolyte-based cells. No obvious capacity fading was observed, indicating the long-term stability of LiBFSIE for lithium metal batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Bridging the gap between simulated and experimental ionic conductivities in lithium superionic conductors

Lithium superionic conductors (LSCs) are of major importance as solid electrolytes for next-generation all-solid-state lithium-ion batteries. While ab initio molecular dynamics have been extensively applied to study these materials, there are often large discrepancies between predicted and experimentally measured ionic conductivities and activation energies due to the high temperatures and short time scales of such simulations. Here, we present a strategy to bridge this gap using moment tensor potentials (MTPs). We show that MTPs trained on energies and forces computed using the van der Waals optB88 functional yield much more accurate lattice parameters, which in turn leads to accurate prediction of ionic conductivities and activation energies for the Li 0·33 La 0·56 TiO 3 , Li 3 YCl 6 and Li 7 P 3 S 11 LSCs. NPT MD simulations using the optB88 MTPs also reveal that all three LSCs undergo a transition between two quasi-linear Arrhenius regimes at relatively low temperatures. This transition can be traced to an increase in the number and diversity of diffusion pathways, in some cases with a change in the dimensionality of diffusion. Furthermore, this work presents not only an approach to develop high accuracy MTPs, but also outlines the diffusion characteristics for LSCs which is otherwise inaccessible through ab initio computation.

25 ENERGY STORAGE↗
DOE OSTI2020

Consequences of Convex Nanopore Chemistry on Confined Water Dynamics

A basic understanding of confined water is crucial for developing selective ion transport and water purification membranes, yet the roles of nanopore geometry and functionality on confined water dynamics remain unresolved. We discuss the synthesis of perdeuterated ionic alkylsulfonate amphiphiles and their water-induced self-assembly into lyotropic liquid crystal (LLC) mesophases with well-defined, convex, sulfonate-lined nanopores. Quasielastic neutron scattering (QENS) measurements demonstrate that the water self-diffusion coefficients within these sulfonate-lined convex nanopores depend on the hydration level and amphiphile counterion identity (H + , K + , NMe 4 + ). The consistency of the observed counterion-dependent water dynamics trends with those of carboxylate LLCs is rationalized on the basis of similarities in the counterion spatial distributions in the water-filled channels, which we deduce from electron density maps derived from small-angle X-ray scattering (SAXS) analyses. These findings indicate that water diffusion is systematically faster in sulfonate-lined nanopores as compared to carboxylate-lined pores due to weaker water interactions with the softer and more hydrophobic–SO 3 – functionalities. These molecular-level insights into the relationships between convex pore wall chemical functionalities, hydrated counterions, and confined water diffusion may inform future development of new nanoporous media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

ReaxFF molecular dynamics simulations of electrolyte–water systems at supercritical temperature

We have performed ReaxFF molecular dynamics simulations of alkali metal–chlorine pairs in different water densities at supercritical temperature (700 K) to elucidate the structural and dynamical properties of the system. The radial distribution function and the angular distribution function explain the inter-ionic structural and orientational arrangements of atoms during the simulation. The coordination number of water molecules in the solvation shell of ions increases with an increase in the radius of ions. We find that the self-diffusion coefficient of metal ions increases with a decrease in density under supercritical conditions due to the formation of voids within the system. The hydrogen bond dynamics has been interpreted by the residence time distribution of various ions, which shows Li+ having the highest water retaining capability. The void distribution within the system has been analyzed by using the Voronoi polyhedra algorithm providing an estimation of void formation within the system at high temperatures. We observe the formation of salt clusters of Na+ and K+ at low densities due to the loss of dielectric constants of ions. The diffusion of ions gets altered dramatically due to the formation of voids and nucleation of ions in the system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

The Transport Properties of Quasi–One-Dimensional Ba 3 Co 2 O 6 (CO 3 ) 0.7

We have performed combined elastic neutron diffuse, electrical transport, specific heat, and thermal conductivity measurements on the quasi–one-dimensional Ba 3 Co 2 O 6 (CO 3 ) 0.7 single crystal to characterize its transport properties. A modulated superstructure of polyatomic CO 3 2- is formed, which not only interferes the electronic properties of this compound, but also reduces the thermal conductivity along the c-axis. Furthermore, a large magnetic entropy is observed to be contributed to the heat conduction. Our investigations reveal the influence of both structural and magnetic effects on its transport properties and suggest a theoretical improvement on the thermoelectric materials by building up superlattice with conducting ionic group.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Self-generated electrokinetic flows from active-charged boundary patterns

We develop a hydrodynamic description of self-generated electrolyte flow in capillaries whose bounding walls feature nonuniform distributions of charge nonuniform active ionic fluxes. The hydrodynamic velocity arising in such a system has components that are forbidden by symmetry in the absence of charge and fluxes. However, when these two boundary mechanisms are simultaneously present, they can lead to a symmetry broken state where steady flows with both unidirectional and circulatory components emerge. We show that these flow states arise when modulated boundary patterns of charge and fluxes are offset by a flux-charge phase difference, which is associated with the separation between sites of their peak densities on the wall. Mismatch in diffusivity of cationic and anionic species can modify the flow states and becomes an enhancing factor when fluxes of both ion species are being produced together at the same site. We demonstrate that this mechanism can be realized with a microfluidic generator that is powered by enzyme-coated patches that catalyze reactants in the solution to produce fluxes of ions. The local ionic elevation or depletion, which disrupts a nonuniform double layer, promotes self-induced gradients yielding persistent body forces to generate bulk fluid motion. Our work quantifies a boundary-driven mechanism behind self-sustained electrolyte flow in confined environments that exists without any external bulk-imposed fields or gradients. It provides a theoretical framework for understanding the combined effect of active and charged boundaries that are relevant in biological or soft matter systems, and can be utilized in electrofluidic and iontronic applications.

active matter↗
DOE OSTI2023

Structural evolution during solution-based synthesis of Li 7 P 3 S 11 solid electrolyte by synchrotron X-ray total scattering

Solution-based synthesis has emerged as a promising approach for scalable and efficient synthesis of solid electrolytes (SEs). However, the ionic conductivity of solution-synthesized SEs is much lower than that of SEs synthesized by solid state approaches. The structural evolution during the synthesis of SEs is crucial to explaining the decreased ionic conductivities but has not been well understood. Here, in this work, we use synchrotron X-ray total scattering combined with pair distribution function (PDF) analysis to understand the structural evolution during annealing of the solution-processed precursor for the synthesis of Li 7 P 3 S 11 SEs. Combining Bragg diffraction and diffuse scattering, X-ray total scattering enables detection of structural information including phase transition and crystallinity. The results show that the formation of Li 7 P 3 S 11 glass-ceramic starts at 230 °C. Increasing the annealing temperature helps to improve the crystallinity, but the degree of crystallization is still lower than 70.3% even after annealing at 290 °C when thermal decomposition of Li 7 P 3 S 11 to Li 4 P 2 S 6 has occurred. PDF analysis also revealed the existence of acetonitrile used in the solution-based synthesis in the SEs after annealing at high temperatures. The results rationalize the synthesis–property relationship, explain why annealing at 290 °C provides the highest ionic conductivity at the studied temperatures due to an optimal balance for achieving a high crystallinity while suppressing severe decomposition of Li 7 P 3 S 11 , and provide novel insights to develop approaches for synthesizing superior Li 7 P 3 S 11 SEs on a large scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Dynamic Mixing Behaviors of Ionically Tethered Polymer Canopy of Nanoscale Hybrid Materials in Fluids of Varying Physical and Chemical Properties

An emerging area of sustainable energy and environmental research is focused on the development of novel electrolytes that can increase the solubility of target species and improve subsequent reaction performance. Electrolytes with chemical and structural tunability have allowed for significant advancements in flow batteries and CO 2 conversion integrated with CO 2 capture. Liquid-like nanoparticle organic hybrid materials (NOHMs) are nanoscale fluids that are composed of inorganic nanocores and an ionically tethered polymeric canopy. NOHMs have been shown to exhibit enhanced conductivity making them promising for electrolyte applications, though they are often challenged by high viscosity in the neat state. In this study, a series of binary mixtures of NOHM-I-HPE with five different secondary fluids, water, chloroform, toluene, acetonitrile, and ethyl acetate, were prepared to reduce the fluid viscosity and investigate the effects of secondary fluid properties (e.g., hydrogen bonding ability, polarity, and molar volume) on their transport behaviors, including viscosity and diffusivity. We report our results revealed that the molecular ratio of secondary fluid to the ether groups of Jeffamine M2070 ($λ_{\text{SF}}$) was able to describe the effect that secondary fluid has on transport properties. Our findings also suggest that in solution, the Jeffamine M2070 molecules exist in different nanoscale environments, where some are more strongly associated with the nanoparticle surface than others, and the conformation of the polymer canopy was dependent on the secondary fluid. This understanding of the polymer conformation in NOHMs can allow for the better design of an electrolyte capable of capturing and releasing small gaseous or ionic species.

25 ENERGY STORAGE↗
DOE OSTI2020

Addition of Chloroform in a Solvent-in-Salt Electrolyte: Outcomes in the Microscopic Dynamics in Bulk and Confinement

Solvent-in-salt electrolytes (SISEs) are a promising alternative to the electrolytes currently used in commercial devices. Despite the SISEs’ advantages, their utilization is not yet realized due to the poor mobility of their chemical species. Here, we explore this problem by adding chloroform to a SISE formed by acetonitrile and a Li-salt. First, we performed illustrative cycling experiments to highlight the potential of this approach. Then, we focused on the description of the microscopic dynamics of the electrolytes and exposed the relevant aspects to be considered for their optimal performance. While the conductivity at low temperatures may be enhanced by the addition of chloroform, only subtle changes occur at room temperature. As revealed by molecular dynamics simulations and quasielastic neutron scattering (QENS) experiments, this effect is related to the preservation of the structure expected for a highly concentrated solution and promotion of the formation of ionic aggregates. These outcomes occur despite the increase in the overall mobility of the chemical species. The dynamics of the electrolytes in porous carbon was also investigated using QENS. In these circumstances, low concentrations of chloroform lead to diffusivities of the molecular species higher than those observed for the bulk electrolytes. As chloroform’s concentration increases, no further changes in the diffusivities are observed. Nonetheless, chloroform is mostly immobilized on the carbon surfaces and this behavior may be intensified at compositions closer to the eutectic mixture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Constraining Interlayer Slipping in P2-Type Layered Oxides with Oxygen Redox by Constructing Strong Covalent Bonds

Lattice oxygen redox (LOR) in P2-type layered oxides is an effective strategy to break through the limit of energy density of conventional cathodes due to its high redox potential (>4 V vs. Na + /Na) as well as extra capacity. Nevertheless, LOR induced local structure distortion and irreversible phase transitions cause serious electrochemical performance degradation, hindering the practical applications. In this work, we propose that the generation of the OP4 phase can be replaced with the Z phase by introducing Sb element with higher ionic potential and strong covalent bonds within the TMO 6 octahedron. Z phase transition is realized by constraining interlayer slipping between adjacent TM layers compared to OP4, which reduces the strain in the layered structure, lowers the Na+ diffusion energy barrier and creates more efficient Na+ diffusion channels. Consequently, Sb-substituted oxides demonstrates excellent kinetics, rate capability (79 mAh g -1 at 1 A g -1 ) in half cell and a high energy density of 487 Wh kg -1 (on cathode) in full cell.

25 ENERGY STORAGE↗
DOE OSTI2021

Reversible hydrogen control of antiferromagnetic anisotropy in α-Fe 2 O 3

Antiferromagnetic insulators are a ubiquitous class of magnetic materials, holding the promise of low-dissipation spin-based computing devices that can display ultra-fast switching and are robust against stray fields. However, their imperviousness to magnetic fields also makes them difficult to control in a reversible and scalable manner. Here we demonstrate a novel proof-of-principle ionic approach to control the spin reorientation (Morin) transition reversibly in the common antiferromagnetic insulator α-Fe 2 O 3 (haematite) - now an emerging spintronic material that hosts topological antiferromagnetic spin-textures and long magnon-diffusion lengths. We use a low-temperature catalytic-spillover process involving the post-growth incorporation or removal of hydrogen from α-Fe 2 O 3 thin films. Hydrogenation drives pronounced changes in its magnetic anisotropy, Néel vector orientation and canted magnetism via electron injection and local distortions. We explain these effects with a detailed magnetic anisotropy model and first-principles calculations. Tailoring our work for future applications, we demonstrate reversible control of the room-temperature spin-state by doping/expelling hydrogen in Rh-substituted α-Fe 2 O 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2025

Structural origin of disorder-induced ion conduction in NaFePO 4 cathode materials

Diffusion in NaFePO 4 can be enhanced through amorphization. Based on computations using DFT and machine learning potentials, we ascribe this phenomenon to the formation of less constrained Na-ion environments upon disordering. Most modern battery technologies depend on solid-state crystalline cathode materials. However, some of these materials are constrained by the low ionic conductivity of their most stable phases. An example of this is maricite (NaFePO 4 ). Interestingly, experiments have shown that maricite can improve its rate capability through disordering (amorphization). However, experimental characterization of amorphous cathode materials remains a major challenge, hindering a clear understanding of the structural origin of the disorder-induced improvement in sodium-ion mobility. To address this, we here employ molecular dynamics simulations by first training a machine learning potential for NaFePO 4 based on the atomic cluster expansion approach and a batch active learning potential parameterization scheme. This potential is then applied to explore the structural and dynamical properties of NaFePO 4 glasses as cathode materials. Specifically, we investigate the effect of glass structure on sodium-ion diffusion, revealing the relative influences of short-range and medium-range order features. We find significant heterogeneity in sodium-ion diffusivity in the glass, with fast-conducting ions residing in less constrained atomic environments with fewer P and Fe neighbors. These more mobile ions are also surrounded by larger ring-type structures. Overall, the results and developed approach present promising avenues for developing high-performance glassy cathodes for next-generation batteries.

Christensen, Rasmus↗
DOE OSTI2021

Hex-C 558 : A new porous metallic carbon allotrope for lithium-ion battery anode

Due to the limited specific capacity of graphite anodes in lithium-ion batteries (LIBs), it is imperative to find alternatives with better performance. Here in this work, we propose, for the first time, a three dimensional (3D) porous metallic 5-5-8 carbon monolith with hexagonal lattice as a potential candidate. With 5-5-8 carbon nanoribbon as the building block, this material, named Hex-C558, goes beyond graphene-nanoribbon-based 3D porous carbon structures. Using first-principles calculations, we show that Hex-C 558 is not only dynamically and thermally stable, but also is energetically more favorable than many other theoretically predicted carbon allotropes. More importantly, Hex-C 558 is metallic with ordered ionic conducting channels and possesses a low mass density of 1.05 gcm -3 , exhibiting great potential for ion-battery applications. As an anode for LIBs, Hex-C558 possesses a large specific capacity of 591 mAhg -1 , low diffusion energy barrier of 0.27 eV (at low Li concentration) and 0.52 eV (at high Li concentration), a low open-circuit voltage of 0.51 V, and a small volume change of 2.4%. This work provides a new route for the design and synthesis of novel carbon materials for battery applications by using pentagon-based building units.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Bio‐Imaging quorum sensing signal molecules in a soil‐mimic gel

Rhizosphere, the narrow region surrounding plant roots directly influenced by root exudates and the root associated microbiome, plays an important role in plant productivity and the rhizosphere is well known for stimulating microbial metabolic activities. How microbial communities interact to form stable, metabolically interconnected functional communities is an area of intense interest. The question remains on how microbially produced secreted molecules that function as intercellular communication signals shape the structure and function of microbial communities. Our goal is to detect and quantify signal molecules produced by microbes or plants in the root‐soil environment, spatially and temporarily. As a proof‐of‐concept, we are imaging diffusible extracellular microbial metabolites involved in a bacteria‐bacteria communication process called quorum‐sensing. Quorum‐sensing relies on the accumulation of high concentrations of signal molecules in the environment to control bacterial gene expression, influencing rhizosphere colonization and plant health. Local concentration of quorum sensing molecules are determined using aptamer based sensors. Aptamers that can specifically bind the desired signal molecules are selected through SELEX and immobilized on the surface of nano‐porous membranes. Binding of the signal molecules and aptamer covered surface results in changes in surface charge distribution and steric hinderance and thus modifying the transmembrane ionic transport. Changes in transmembrane impedance can be measured through electrochemical impedance spectroscopy methods to monitor local concentrations of signal molecules. Sensor responses were determined for different concentrations of signal molecules and results showed detection of C4‐HSL in a soil‐mimic solution with K D of 10 nM. We demonstrate that the quorum‐sensing signal molecule C4‐homoserine lactone and (C4‐HSL) can rapidly diffuse in a soil‐mimic gel, providing evidence for our use of a soil‐mimic for further aptasensor development and validation. The sensors were then inserted into soil mimic gel for monitoring C4‐HSL diffusion and the resulted impedance changes were used to determine the C4‐HSL concentration at different positions in the gel. Measurements of local C4‐HSL concentrations variation and numerical solution of diffusion equation were used to create 4D images of C4‐HSL molecule diffusion in the soil‐mimic gel.

Jiang, Nianyu↗
DOE OSTI2021

Molecular Understanding of Charge Storage in MoS 2 Supercapacitors with Ionic Liquids

Owing to high electrical conductivity and ability to reversibly host a variety of inserted ions, 2D metallic molybdenum disulfide (1T-MoS 2 ) has demonstrated promising energy storage performance when used as a supercapacitor electrode. However, its charge storage mechanism is still not fully understood, in particular, how the interlayer spacing of 1T-MoS 2 would affect its capacitive performance. In this work, molecular dynamics simulations of 1T-MoS 2 with interlayer spacing ranging from 0.615 to 1.615 nm have been performed to investigate the resulting charge storage capacity in ionic liquids. Simulations reveal a camel-like capacitance-potential relation, and MoS 2 with an interlayer spacing of 1.115 nm has the highest volumetric and gravimetric capacitance of 118 F cm –3 and 42 F g –1 , respectively. Although ions in MoS 2 with an interlayer spacing of 1.115 nm diffuse much faster than with interlayer spacings of 1.365 and 1.615 nm, the MoS 2 with larger interlayer spacing has a much faster-charging process. Our analyses reveal that the ion number density and its charging speed, as well as ion motion paths, have significant impacts on the charging response. Here, this work helps to understand how the interlayer spacing affects the interlayer ion structures and the capacitive performance of MoS 2 , which is important for revealing the charge storage mechanism and designing MoS 2 supercapacitor.

25 ENERGY STORAGE↗
DOE OSTI2025

Synthetic Accessibility and Sodium Ion Conductivity of the Na8–x A x P2O9 (NAP) High-Temperature Sodium Superionic Conductor Framework

Advancement of solid-state electrolytes (SSEs) for all solid-state batteries typically focuses on modification of a known structural framework to improve conductivity, e.g., cation substitution for an immobile ion or varying the concentration of the mobile ions. Novel frameworks can be disruptive by enabling fast ion conduction aided by different structure and diffusion mechanisms, thereby unlocking optimal conductors with different properties. Herein, we perform a high-throughput survey of a structural framework for sodium ion conduction, Na8–x A x P2O9 (NAP), to understand the family’s thermodynamic stability, synthesizability, and ionic conduction. We show that the parent phase Na4TiP2O9 (NTP) undergoes a structural distortion (with accompanying conductivity transition) due to unstable phonons arising from pseudo-Jahn–Teller mode in the 1D titanium chains. Screening compounds in which Ti is substituted by other metals computationally reveal a number of candidates that are predicted to be low in formation energy and have high predicted ionic conductivities. High-throughput experimental and subsequent methodology optimization trials deliver one new compound, Na4SnP2O9 (NSP). X-ray diffraction (XRD), microscopy, and spectroscopy characterization indicate that the room-temperature structure of NSP is similar to the high-temperature, orthorhombic NTP phase but with some small unresolved structural differences. These uncharacterized structural details are speculated to limit the ion conductivity. Temperature-dependent XRD and electrochemical impedance spectroscopy indicate multiple coupled conductivity–structure transitions at a high temperature. We demonstrate the challenges with synthesis development and a priori identification of promising SSE phases as a major bottleneck in new (energy) materials development.

Chemical reactions↗
DOE OSTI2020

Abnormally Low Activation Energy in Cubic Na3SbS4 Superionic Conductor

Inorganic Na-ion superionic conductors play a vital role in all-solid-state Na batteries that operate at room temperature. Sodium thioantimonate (Na3SbS4), a popular sulfide-based solid electrolyte, has attracted serious attention due to its advantages of high ionic conductivity at room temperature and impressive chemical stability under ambient conditions. Much research detailing Na3SbS4 focused on its synthetic approaches and interfacial stability against Na metal, yet, there is limited information elucidating a fundamental understanding of the Na- ion diffusion mechanisms in Na3SbS4 with different crystal structures (e.g., tetragonal and cubic). Herein, we combine real-time electrochemical impedance measurements with theoretical simulations based on density functional theory and in situ quasi-elastic neutron scattering to study the Na-ion conductive properties of Na3SbS4 during its phase transition from a tetragonal to cubic structure. Although there is a slight change in the lattice parameters, the energy barrier for Na-ion diffusion in the tetragonal structure was determined to be much larger (5-10 times) than that in the cubic structure from both theoretical and experimental perspectives. The high degree of symmetry in cubic Na3SbS4 leads to less interatomic correlations between Na and S(Sb) atoms, a shorter jump distance (2.85 angstrom), and a larger diffusion coefficient. This research provides insight into understanding the Na-ion diffusion in solid electrolytes with phase transitions and provides fundamental guidance for designing novel solid-state Na-ion conductors.

Zhang, Qian↗
DOE OSTI2026

Elimination of detrimental grain boundary segregation in garnets

Garnet Li 7 La 3 Zr 2 O 12 electrolyte is considered a key enabler of solid-state batteries with Li metal electrodes, but the grain boundaries impair its performance. To date, the understanding of grain boundary structures and its impact on performance remains elusive. Here, we show that element segregation at Li 7 La 3 Zr 2 O 12 grain boundaries critically governs Li transport and nucleation. During conventional sintering, Al, Ta, and La segregate at grain boundaries, locally depleting Li and creating space-charge layers that lower total ionic conductivity. Simultaneously, this segregation leads to higher electronic conductivity along grain boundaries, which promotes Li nucleation at grain boundary edges with increased risk of dendrite formation. The underlying mechanism of segregation is governed by both thermodynamic driving forces and diffusion kinetics. Building on this understanding, we develop a strategy to achieve segregation-free grain boundaries through a rapid sintering protocol that utilizes the onset of solid-state softening. This approach yields transparent, polycrystalline Li 7 La 3 Zr 2 O 12 with negligible grain boundary impedance and enhanced dendrite tolerance. By elucidating the structural origins and electrochemical consequences of grain boundary segregation, this work provides a guidance for the rational optimization of solid electrolytes.

Energy - Storage↗