SEARCH · Search NASA

Results for “LANDING SYSTEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

All sources NASA NTRS DOE OSTI

NASA NTRS1978

Improved aircraft dynamic response and fatigue life during ground operations using an active control landing gear system

A three-degree-of-freedom aircraft landing analysis incorporating a series-hydraulic active control main landing gear has been developed and verified using preliminary experimental data from drop tests of a modified main landing gear from a 2722 kg (6000 lbm) class of airplane. The verified analysis was also employed to predict the landing dynamics of a supersonic research airplane with an active control main landing gear system. The results of this investigation have shown that this type of active gear is feasible and indicate a potential for improving airplane dynamic response and reducing structural fatigue damage during ground operations by approximately 90% relative to that incurred with the passive gear.

Mcgehee, J. R.↗

NASA NTRS2015

SMOS Soil Moisture Data Assimilation in the NASA Land Information System: Impact on LSM Initialization and NWP Forecasts

Land surface models are important components of numerical weather prediction (NWP) models, partitioning incoming energy into latent and sensitive heat fluxes that affect boundary layer growth and destabilization. During warm-season months, diurnal heating and convective initiation depend strongly on evapotranspiration and available boundary layer moisture, which are substantially affected by soil moisture content. Therefore, to properly simulate warm-season processes in NWP models, an accurate initialization of the land surface state is important for accurately depicting the exchange of heat and moisture between the surface and boundary layer. In this study, soil moisture retrievals from the Soil Moisture and Ocean Salinity (SMOS) satellite radiometer are assimilated into the Noah Land Surface Model via an Ensemble Kalman Filter embedded within the NASA Land Information System (LIS) software framework. The output from LIS-Noah is subsequently used to initialize runs of the Weather Research and Forecasting (WRF) NWP model. The impact of assimilating SMOS retrievals is assessed by initializing the WRF model with LIS-Noah output obtained with and without SMOS data assimilation. The southeastern United States is used as the domain for a preliminary case study. During the summer months, there is extensive irrigation in the lower Mississippi Valley for rice and other crops. The irrigation is not represented in the meteorological forcing used to drive the LIS-Noah integration, but the irrigated areas show up clearly in the SMOS soil moisture retrievals, resulting in a case with a large difference in initial soil moisture conditions. The impact of SMOS data assimilation on both Noah soil moisture fields and on short-term (0-48 hour) WRF weather forecasts will be presented.

Blankenship, Clay↗

NASA NTRS2013

The Utility of the Real-Time NASA Land Information System Data for Drought Monitoring Applications

Measurements of soil moisture are a crucial component for the proper monitoring of drought conditions. The large spatial variability of soil moisture complicates the problem. Unfortunately, in situ soil moisture observing networks typically consist of sparse point observations, and conventional numerical model analyses of soil moisture used to diagnose drought are of coarse spatial resolution. Decision support systems such as the U.S. Drought Monitor contain drought impact resolution on sub-county scales, which may not be supported by the existing soil moisture networks or analyses. The NASA Land Information System, which is run with 3 km grid spacing over the eastern United States, has demonstrated utility for monitoring soil moisture. Some of the more useful output fields from the Land Information System are volumetric soil moisture in the 0-10 cm and 40-100 cm layers, column-integrated relative soil moisture, and the real-time green vegetation fraction derived from MODIS (Moderate Resolution Imaging Spectroradiometer) swath data that are run within the Land Information System in place of the monthly climatological vegetation fraction. While these and other variables have primarily been used in local weather models and other operational forecasting applications at National Weather Service offices, the use of the Land Information System for drought monitoring has demonstrated utility for feedback to the Drought Monitor. Output from the Land Information System is currently being used at NWS Huntsville to assess soil moisture, and to provide input to the Drought Monitor. Since feedback to the Drought Monitor takes place on a weekly basis, weekly difference plots of column-integrated relative soil moisture are being produced by the NASA Short-term Prediction Research and Transition Center and analyzed to facilitate the process. In addition to the Drought Monitor, these data are used to assess drought conditions for monthly feedback to the Alabama Drought Monitoring and Impact Group and the Tennessee Drought Task Force, which are comprised of federal, state, and local agencies and other water resources professionals.

White, Kristopher D.↗

NASA NTRS2025

Integrating the Interconnections Between Groundwater and Land Surface Processes Through the Coupled NASA Land Information System and ParFlow Environment

Understanding the interactions between the atmosphere, the land, and the subsurface is fundamental to hydrology and is critical for a better assessment of the impacts of climate change and human management on hydrological systems. However, many land surface models simplify the subsurface hydrology and thereby these interactions. In this study, we couple the land surface model Noah-MP included in the NASA Land Information System (LIS) with the integrated hydrologic model ParFlow (ParFlow-LIS) using the Earth System Modeling Framework (ESMF) and the National United Operational Prediction Capability (NUOPC). This coupling improves the simulation of water and energy cycle processes by adding the three-dimensional variably saturated and heterogeneous flow in the subsurface using sophisticated and nonlinear physics-based equations as well as the advances in satellite remote sensing-based data assimilation of the land surface, thereby benefiting the integrated hydrologic modeling and data assimilation community. We use the High Plains aquifer, located in the central United States, as a testbed to evaluate the coupled ParFlow-LIS system. The new ParFlow-LIS system accounts for the effects of topographically driven flows on the land surface, producing more fine-scale patterns of land surface states and fluxes than standalone LIS. In addition, ParFlow-LIS enables the consideration of the effect of subsurface water storage on evapotranspiration. This is particularly important in areas and times with dry soils, such as during drought conditions or in the presence of a cone of depression due to pumping.

land surface modeling↗

NASA NTRS1981

A flexible approach to an Operational Land Observing System

This paper presents a concept for an Operational Land Observing System (OLOS) formulated to satisfy a broad spectrum of perceived user needs for a diverse discipline community. The concept formulated will allow continuous orthographic imaging across multiple spectral bands, near-global stereoscopic imaging, and next-day oblique imaging of any desired spot on earth. Imaging parameters will be adaptable to known phenomena characteristics to facilitate information extraction including optional onboard theme selection. The conceptual system will provide 6- to 12-hour quick-look capability, 48-hour turnaround on all standard imaging products, and a guaranteed data flow schedule reliability for 10 to 20 years. A fleet of successive operational satellites will be used.

Driver, J. M.↗

NASA NTRS1987

Definition and testing of the hydrologic component of the pilot land data system

The specific aim was to develop within the Pilot Land Data System (PLDS) software design environment, an easily implementable and user friendly geometric correction procedure to readily enable the georeferencing of imagery data from the Advanced Very High Resolution Radiometer (AVHRR) onboard the NOAA series spacecraft. A software subsystem was developed within the guidelines set by the PLDS development environment utilizing NASA Goddard Space Flight Center (GSFC) Image Analysis Facility's (IAF's) Land Analysis Software (LAS) coding standards. The IAS current program development environment, the Transportable Applications Executive (TAE), operates under a VAX VMS operating system and was used as the user interface. A brief overview of the ICARUS algorithm that was implemented in the set of functions developed, is provided. The functional specifications decription is provided, and a list of the individual programs and directory names containing the source and executables installed in the IAF system are listed. A user guide is provided for the LAS system documentation format for the three functions developed.

Ragan, Robert M.↗

NASA NTRS2013

Spacecraft Parachute Recovery System Testing from a Failure Rate Perspective

Spacecraft parachute recovery systems, especially those with a parachute cluster, require testing to identify and reduce failures. This is especially important when the spacecraft in question is human-rated. Due to the recent effort to make spaceflight affordable, the importance of determining a minimum requirement for testing has increased. The number of tests required to achieve a mature design, with a relatively constant failure rate, can be estimated from a review of previous complex spacecraft recovery systems. Examination of the Apollo parachute testing and the Shuttle Solid Rocket Booster recovery chute system operation will clarify at which point in those programs the system reached maturity. This examination will also clarify the risks inherent in not performing a sufficient number of tests prior to operation with humans on-board. When looking at complex parachute systems used in spaceflight landing systems, a pattern begins to emerge regarding the need for a minimum amount of testing required to wring out the failure modes and reduce the failure rate of the parachute system to an acceptable level for human spaceflight. Not only a sufficient number of system level testing, but also the ability to update the design as failure modes are found is required to drive the failure rate of the system down to an acceptable level. In addition, sufficient data and images are necessary to identify incipient failure modes or to identify failure causes when a system failure occurs. In order to demonstrate the need for sufficient system level testing prior to an acceptable failure rate, the Apollo Earth Landing System (ELS) test program and the Shuttle Solid Rocket Booster Recovery System failure history will be examined, as well as some experiences in the Orion Capsule Parachute Assembly System will be noted.

Stewart, Christine E.↗

NASA NTRS1987

The Land Analysis System (LAS) - A general purpose system for multispectral image processing

The present, general-purpose Land Analysis System (LAS) for image processing furnishes a comprehensive set of functions for the manipulation of MSS data; the initial version has more than 240 functions and utilities ranging from pixel manipulation to complex classification. A LAS user's guide describes each such function in terms of purpose, input parameters, illustrative examples, algorithms, error messages, and user codes. The LAS source code is so distributed as to simplify system maintenance; the Transportable Application Executive is employed as the user interface, thereby accommodating both expert and novice users by means of menus and tutored prompting.

Wharton, Stephen W.↗

NASA NTRS2005

Parachute Testing for the NASA X-38 Crew Return Vehicle

NASA's X-38 program was an in-house technology demonstration program to develop a Crew Return Vehicle (CRV) for the International Space Station capable of returning seven crewmembers to Earth when the Space Shuttle was not present at the station. The program, managed out of NASA's Johnson Space Center, was started in 1995 and was cancelled in 2003. Eight flights with a prototype atmospheric vehicle were successfully flown at Edwards Air Force Base, demonstrating the feasibility of a parachute landing system for spacecraft. The intensive testing conducted by the program included testing of large ram-air parafoils. The flight test techniques, instrumentation, and simulation models developed during the parachute test program culminated in the successful demonstration of a guided parafoil system to land a 25,000 Ib spacecraft. The test program utilized parafoils of sizes ranging from 750 to 7500 p. The guidance, navigation, and control system (GN&C) consisted of winches, laser or radar altimeter, global positioning system (GPS), magnetic compass, barometric altimeter, flight computer, and modems for uplink commands and downlink data. The winches were used to steer the parafoil and to perform the dynamic flare maneuver for a soft landing. The laser or radar altimeter was used to initiate the flare. In the event of a GPS failure, the software navigated by dead reckoning using the compass and barometric altimeter data. The GN&C test beds included platforms dropped from cargo aircraft, atmospheric vehicles released from a 8-52, and a Buckeye powered parachute. This paper will describe the test program and significant results.

Stein, Jenny M.↗

NASA NTRS1979

Evaluation of the navigation performance of shipboard-VTOL-landing guidance systems

The objective of this study was to explore the performance of a VTOL aircraft landing approach navigation system that receives data (1) from either a microwave scanning beam (MSB) or a radar-transponder (R-T) landing guidance system, and (2) information data-linked from an aviation facility ship. State-of-the-art low-cost-aided inertial techniques and variable gain filters were used in the assumed navigation system. Compensation for ship motion was accomplished by a landing pad deviation vector concept that is a measure of the landing pad's deviation from its calm sea location. The results show that the landing guidance concepts were successful in meeting all of the current Navy navigation error specifications, provided that vector magnitude of the allowable error, rather than the error in each axis, is a permissible interpretation of acceptable performance. The success of these concepts, however, is strongly dependent on the distance measuring equipment bias. In addition, the 'best possible' closed-loop tracking performance achievable with the assumed point-mass VTOL aircraft guidance concept is demonstrated.

Mcgee, L. A.↗

NASA NTRS2013

The Development of the MSL Guidance, Navigation, and Control System for Entry, Descent, and Landing

On August 5, 2012, the Mars Science Laboratory (MSL) mission successfully delivered the Curiosity rover to its intended target. It was the most complex and ambitious landing in the history of the red planet. A key component of the landing system, the requirements for which were driven by the mission ambitious science goals, was the Guidance, Navigation, and Control (GN&C) system. This paper will describe the technical challenges of the MSL GN&C system, the resulting architecture and design needed to meet those challenges, and the development process used for its implementation and testing.

entry, descent, and landing.↗

NASA NTRS2011

Land Data Assimilation of Satellite-Based Soil Moisture Products Using the Land Information System Over the NLDAS Domain

This presentation will include results from data assimilation simulations using the NASA-developed Land Information System (LIS). Using the ensemble Kalman filter in LIS, two satellite-based soil moisture products from the AMSR-E instrument were assimilated, one a NASA-based product and the other from the Land Parameter Retrieval Model (LPRM). The domain and land-surface forcing data from these simulations were from the North American Land Data Assimilation System Phase-2, over the period 2002-2008. The Noah land-surface model, version 3.2, was used during the simulations. Changes to estimates of land surface states, such as soil moisture, as well as changes to simulated runoff/streamflow will be presented. Comparisons over the NLDAS domain will also be made to two global reference evapotranspiration (ET) products, one an interpolated product based on FLUXNET tower data and the other a satellite- based algorithm from the MODIS instrument. Results of an improvement metric show that assimilating the LPRM product improved simulated ET estimates while the NASA-based soil moisture product did not.

Mocko, David M.↗

NASA NTRS2013

Comparison of Four Precipitation Forcing Datasets in Land Information System Simulations over the Continental U.S.

The NASA Short ]term Prediction Research and Transition (SPoRT) Center in Huntsville, AL is running a real ]time configuration of the NASA Land Information System (LIS) with the Noah land surface model (LSM). Output from the SPoRT ]LIS run is used to initialize land surface variables for local modeling applications at select National Weather Service (NWS) partner offices, and can be displayed in decision support systems for situational awareness and drought monitoring. The SPoRT ]LIS is run over a domain covering the southern and eastern United States, fully nested within the National Centers for Environmental Prediction Stage IV precipitation analysis grid, which provides precipitation forcing to the offline LIS ]Noah runs. The SPoRT Center seeks to expand the real ]time LIS domain to the entire Continental U.S. (CONUS); however, geographical limitations with the Stage IV analysis product have inhibited this expansion. Therefore, a goal of this study is to test alternative precipitation forcing datasets that can enable the LIS expansion by improving upon the current geographical limitations of the Stage IV product. The four precipitation forcing datasets that are inter ]compared on a 4 ]km resolution CONUS domain include the Stage IV, an experimental GOES quantitative precipitation estimate (QPE) from NESDIS/STAR, the National Mosaic and QPE (NMQ) product from the National Severe Storms Laboratory, and the North American Land Data Assimilation System phase 2 (NLDAS ]2) analyses. The NLDAS ]2 dataset is used as the control run, with each of the other three datasets considered experimental runs compared against the control. The regional strengths, weaknesses, and biases of each precipitation analysis are identified relative to the NLDAS ]2 control in terms of accumulated precipitation pattern and amount, and the impacts on the subsequent LSM spin ]up simulations. The ultimate goal is to identify an alternative precipitation forcing dataset that can best support an expansion of the real ]time SPoRT ]LIS to a domain covering the entire CONUS.

Case, Jonathan L.↗

NASA NTRS2023

Operational Integration Potential of Regional Uncrewed Aircraft Systems Into the Airspace System

As part of newly developing aviation markets, fixed-wing Uncrewed Aircraft Systems (UAS) are projected to impact airspace systems and conventional air traffic in the future. The initial introduction of fixed-wing cargo UAS for regional operations is anticipated to occur at smaller under-utilized airports. Therefore, this paper assesses the integration potential of regional fixed-wing cargo UAS into the airspace system. A baseline is established to identify potential airports for cargo UAS operations in different areas. Additionally, using 2022 data, regional aircraft eligible for future cargo UAS operations are investigated. Finally, the accessibility of these regional aircraft at the identified airports was analysed. Based on the availability of current certified landing systems needed for initial UAS operations, potential airports in the areas Germany, Texas, and California for UAS operations are compared. Additionally, based on the maximum takeoff weight allowances of airport runways, current air transport operations at airports, and airspace classes, individual airports with a high potential for the introduction of initial cargo UAS operations with and without the availability of landing systems needed for UAS are identified and compared among the investigated areas. Despite a total of 173 identified airports for potential UAS operations in Germany, 376 in Texas, and 231 in California, only eleven of these airports currently have the certified landing systems needed for initial UAS operations. However, other landing system technologies that are currently under development, such as vision-based landing systems, might support UAS accessibility at the identified airports for potential UAS operations in the future.

Uncrewed aircraft systems↗

NASA NTRS1975

Evaluation of a linear washout for simulator motion cue presentation during landing approach

The comparison of a fixed-base versus a five-degree-of-freedom motion base simulation of a 737 conventional take-off and landing (CTOL) aircraft performing instrument landing system (ILS) landing approaches was used to evaluate a linear motion washout technique. The fact that the pilots felt that the addition of motion increased the pilot workload and this increase was not reflected in the objective data results, indicates that motion cues, as presented, are not a contributing factor to root-mean-square (rms) performance during the landing approach task. Subjective results from standard maneuvering about straight-and-level flight for specific motion cue evaluation revealed that the longitudinal channels (pitch and surge) possibly the yaw channel produce acceptable motions. The roll cue representation, involving both roll and sway channels, was found to be inadequate for large roll inputs, as used for example, in turn entries.

Parrish, R. V.↗

NASA NTRS1977

Instruments and method of air navigation

Topics discussed include magnetic and astronavigation instruments; flight beyond ground visibility; aircraft radio navigation instruments and communication radio sets; instrument landing systems; and ground controlled landing systems.

Source record↗

NASA NTRS1977

Information processing requirements for on-board monitoring of automatic landing

A systematic procedure is presented for determining the information processing requirements for on-board monitoring of automatic landing systems. The monitoring system detects landing anomalies through use of appropriate statistical tests. The time-to-correct aircraft perturbations is determined from covariance analyses using a sequence of suitable aircraft/autoland/pilot models. The covariance results are used to establish landing safety and a fault recovery operating envelope via an event outcome tree. This procedure is demonstrated with examples using the NASA Terminal Configured Vehicle (B-737 aircraft). The procedure can also be used to define decision height, assess monitoring implementation requirements, and evaluate alternate autoland configurations.

Sorensen, J. A.↗

NASA NTRS1993

Parallel runway requirement analysis study. Volume 1: The analysis

The correlation of increased flight delays with the level of aviation activity is well recognized. A main contributor to these flight delays has been the capacity of airports. Though new airport and runway construction would significantly increase airport capacity, few programs of this type are currently underway, let alone planned, because of the high cost associated with such endeavors. Therefore, it is necessary to achieve the most efficient and cost effective use of existing fixed airport resources through better planning and control of traffic flows. In fact, during the past few years the FAA has initiated such an airport capacity program designed to provide additional capacity at existing airports. Some of the improvements that that program has generated thus far have been based on new Air Traffic Control procedures, terminal automation, additional Instrument Landing Systems, improved controller display aids, and improved utilization of multiple runways/Instrument Meteorological Conditions (IMC) approach procedures. A useful element to understanding potential operational capacity enhancements at high demand airports has been the development and use of an analysis tool called The PLAND_BLUNDER (PLB) Simulation Model. The objective for building this simulation was to develop a parametric model that could be used for analysis in determining the minimum safety level of parallel runway operations for various parameters representing the airplane, navigation, surveillance, and ATC system performance. This simulation is useful as: a quick and economical evaluation of existing environments that are experiencing IMC delays, an efficient way to study and validate proposed procedure modifications, an aid in evaluating requirements for new airports or new runways in old airports, a simple, parametric investigation of a wide range of issues and approaches, an ability to tradeoff air and ground technology and procedures contributions, and a way of considering probable blunder mechanisms and range of blunder scenarios. This study describes the steps of building the simulation and considers the input parameters, assumptions and limitations, and available outputs. Validation results and sensitivity analysis are addressed as well as outlining some IMC and Visual Meteorological Conditions (VMC) approaches to parallel runways. Also, present and future applicable technologies (e.g., Digital Autoland Systems, Traffic Collision and Avoidance System II, Enhanced Situational Awareness System, Global Positioning Systems for Landing, etc.) are assessed and recommendations made.

Ebrahimi, Yaghoob S.↗