Search NASA⌕ Search

SEARCH · Search NASA

Results for “LED”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Rb 4 CuSb 2 Cl 11 and Rb 2 In 0.91(0.2) Sb 0.09 Cl 5 ·H 2 O: Wide Band Gap 0D Metal Halide Semiconductors

Herein, we report the discovery, structural and photophysical characterization of a new zero-dimensional (0D) lead-free all-inorganic halide, Rb 4 CuSb 2 Cl 11 , which adopts a new structure type. Single-crystal X-ray diffraction (SCXRD) shows that the structure consists of isolated, distorted seesaw [SbCl 4 ] − and trigonal planar [CuCl 3 ] 2− units, separated by Rb + cations that provide charge balance. Optoelectronic measurements and density functional theory (DFT) calculations indicate an indirect band gap of 2.89 eV, making it a candidate for wide-bandgap optoelectronic applications. Electrical resistivity was measured at 1.29 × 10 10 Ω·cm, and the trap-state density (n trap ) was found to be 7.44 × 10 10 cm −3 . Attempts to synthesize substitution analogs of Rb 4 CuSb 2 Cl 11 led to the synthesis of Rb 2 In 0.91(0.2) Sb 0.09 Cl 5 ·H 2 O, which was erroneously reported as Rb 2 SbCl 5 O in a previous study. Rb 2 In 0.91(0.2) Sb 0.09 Cl 5 ·H 2 O adopts a vacancyordered perovskite structure and exhibits broad-band yellow emission under UV excitation. The measured photoluminescence quantum yield (PLQY) for Rb 2 In 0.91 (0.2)Sb 0.09 Cl 5 ·H 2 O is 18.2%. These findings add to the growing class of quaternary metal halides with multiple cation and anion compositions, expanding the chemical phase space for the discovery of new materials with functional properties.

Crystal structure↗
DOE OSTI2026

Tuning Uranium Redox Chemistry in Asymmetric Polyoxometalate Complexes: Access to U(IV), U(V), and Transient U(VI)

We report the synthesis and characterization of asymmetric sandwich-type complexes [TpU IV EW 11 O 39 ] x– (E = P; x = 4, E = Si; x = 5, Tp = trispyrazolylborate). These complexes represent rare examples of the selective formation of asymmetric actinide-polyoxometalate (An-POM) complexes. Oxidation studies show that the U V analogues are stable and accessible, with both complexes isolated. Attempts to access U VI with this framework yield mixed results. Attempts to produce [TpU VI PW 11 O 39 ] 2– only led to decomposition, while electrochemical oxidation experiments gave evidence of transient formation of [TpU VI SiW 11 O 39 ] 3– in solution. Rapid decomposition of [TpU VI SiW 11 O 39 ] 3– inhibits full characterization. These studies indicate that the redox properties and stability of An-POM complexes containing actinides in higher valencies are dependent on the anionic charge of the assembly.

Actinides↗
DOE OSTI2024

In the Mix : A Workshop Merging Computational Chemistry and Electrochemistry Alongside Data Science

As chemistry expands to more complex and interdisciplinary areas, a new generation of diverse researchers must engage with science and learn effective cross-disciplinary collaboration and communication. To these ends, we designed and implemented In the Mix, a graduate student-led, two-day workshop for undergraduate students promoting collaborative science in the context of energy storage innovations. Here, the interactive workshop was designed for future and emerging researchers to gain hands-on experience with data science, computational chemistry, and electrochemistry techniques that are critical for developing materials for battery technologies. Participants also visited commercial renewable energy facilities to help them connect discovery-based research with industry and broader societal considerations. The workshop content and structure ensured that participants experienced the interrelatedness of the fields and understood the importance of collaborative research to yield scientific advances with real-world applications. An external team evaluated the workshop and participants’ perceptions of their experiences. While our research context was energy storage, the workshop goals and outcomes are applicable to other contexts. Interdisciplinary, experiential workshops are a key avenue to broadening participation in science and research, and the ideas presented here can be readily modified for other scientific contexts and/or incorporated as broader impact activities.

25 ENERGY STORAGE↗
DOE OSTI2025

Developing and Demonstrating a Lab Method for Quantifying Hair Exposure to Environmental Tobacco Smoke with a Forensic Perspective

Forensic science and chemistry curricula often lack hands-on experimental designs that effectively simulate the impact of environmental tobacco smoke (ETS) or other common elements found at crime scenes, such as marijuana, on trace forensic evidence. Hair, a critical form of trace evidence, offers unique advantages for assessing long-term exposure to environmental pollutants, including ETS. This study presents a novel, noninvasive forensic laboratory module designed to evaluate ETS exposure on various human hair types (untreated, dyed, and bleached). The experimental procedure involved controlled cigarette smoke exposure, followed by analysis using UV−visible spectroscopy, FTIR spectroscopy, and zeta potential measurements. Thirteen students participated in the three-week lab module (three sessions per week). Pre- and postlab assessments were conducted to evaluate learning outcomes. The prelab assessment focused on baseline knowledge of forensic hair analysis, as well as student expectations and confidence. The postlab assessment evaluated knowledge gained, technical insights, application of techniques, self-reflection, conceptual understanding, and practical skill development. This design helped students comprehend the effects of chemical treatments that significantly influence hair’s capacity to adsorb ETS residues by altering its physical and chemical properties. Integration of this experiment into the forensic chemistry curriculum led to measurable gains in student understanding, technical competency, and appreciation for realworld forensic applications. This method offers a valuable teaching and investigative tool for assessing individual ETS exposure in forensic contexts.

FTIR↗
DOE OSTI2026

Shining Light on Halide Perovskites: Teaching Analytical Chemistry Using Flexible, Inquiry-Based Experiments

Two-dimensional (2D) metal halide perovskites are promising next generation semiconducting materials at the forefront of research in solar cells, LEDs, and other devices. Here, we report on an undergraduate intermediate analytical chemistry laboratory experience where students were taught fundamental chemistry concepts, including solubility, complexation, spectroscopy, and microscopy, through the introduction and study of 2D halide perovskite materials. Students explore multiple facets of perovskite synthesis, structure, and properties through a modular set of experiments that students used to form a holistic picture of this material. Importantly, this inquiry-based lab supports students through a guided research process, and students report high interest and learning gains from an end of the semester survey. We further discuss ways to adapt this lab to course, student, equipment, and budget needs. Overall, this laboratory experience teaches and applies the fundamental concepts and tools of analytical chemistry to the contemporary materials research field.

Analytical Chemistry↗
DOE OSTI2024

Prediction of Redox Potentials for U, Np, Pu, and Am in Aqueous Solution

The redox properties of the actinides in aqueous solution are important for fuel production/reprocessing and understanding the environmental impact of nuclear waste. The redox potentials for U, Np, Pu, and Am in oxidation states from 0 up to VII (as appropriate) in aqueous solutions have been predicted at the density functional theory level with the B3LYP functional, Stuttgart small core pseudopotential basis sets for the actinides, and explicit (30H 2 O molecules)/implicit treatment of the aqueous solvent using the self-consistent reaction field COSMO and SMD approaches for the implicit solvation. The predictions of the structural parameters of clusters incorporating first and second solvation shells are consistent with the available experimental data., Our results are typically within 0.2 V of the available experimental data using two explicit solvation shells with an implicit solvent model. The use of the PW91 functional substantially improved the prediction of the Pu(VI/V) redox couple. The redox couples for An(VI/IV) and An(V/IV) which involve the addition of protons and removal of the actinyl oxygens led to slightly larger differences from experiment. Here, the An(IV/0) and An(III/0) couples were reliably predicted with our approach. Predictions of the unknown An(II/I) redox potentials were negative, consistent with expectations, and predictions for unknown An(VII/VI), An(III/II), and An(II/0) redox couples improve prior estimates.

Actinides↗
DOE OSTI2025

A Comparison of Electronic Structure Methods for Predicting the Hydrogenation Energies of Candidate Molecules for Hydrogen Storage

The development of novel energy materials and fuels is required to expand current available energy sources. Aiming to reach this goal, there is growing interest in using molecular hydrogen as an energy carrier due to its abundance and high energy density. Liquid organic hydrogen carriers (LOHCs) are a promising route to the large-scale storage and transport of hydrogen for use in the energy economy. The search for thermodynamically viable LOHC molecules for real world use has led to a set of constraints on the dehydrogenation enthalpy and the minimum gravimetric hydrogen capacity. These constraints allow one to formulate the search for an ideal LOHC candidate molecule as an optimization problem well suited to the strengths of machine learning and artificial intelligence computational approaches. A critical barrier to a large-scale, high-throughput screening of LOHC candidate molecules is the lack of reliable training data. Computational electronic structure methods including density functional theory, coupled cluster approximations, and diffusion Monte Carlo can be used to provide training data where experimental data are either unreliable or do not exist. In this work, we use these methods to calculate the dehydrogenation energies and enthalpies of candidate LOHC molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Cyclic Peptides for Lanthanide Binding

Lanthanide ions are difficult to separate from one another due to their similar chemical properties. The discovery of lanthanide-binding peptides and proteins in nature has led to an increased interest in the possibility of utilizing the strong binding of peptides to lanthanide ions for their separations; as such, there has been an effort to identify or design peptides with improved lanthanide binding and selectivity toward particular lanthanide ions. Here, in this study, we designed and characterized lanthanide-binding cyclic peptides (LBCPs) with molecular dynamics simulations, electronic structure calculations, and emission spectroscopy. Luminescent decay measurements were done to determine the number of water molecules coordinated to the Eu 3+ ion in Eu-LBCP complexes and compare to the predicted number of water molecules by computation to assess the lanthanide-binding affinity of LBCPs. Measured stability constants show binding of the LBCPs to the Eu 3+ ion with stronger than micromolar affinity. We were able to identify multiple peptides that selectively bind to middle lanthanides. We describe the structural basis of the lanthanide-binding selectivity trend with strongest binding to the middle lanthanides, followed by the heavier lanthanides, and finally to the lighter ions.

ions↗
DOE OSTI2024

AP-XPS Study of the Reaction of O 2 and CO 2 with Zn–Au(111) Surface Alloys: Activation of O–O/C–O Bonds and the Formation of ZnO

Synchrotron-based ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) was used to study the dissociation of O 2 and CO 2 on Zn-Au(111) alloys which contained 0.2-0.3 monolayers of zinc. Although Au(111) is inert, the alloys displayed a high activity for the cleavages of O-O and C-O bonds at room temperature with the formation of ZnO x species. Dissociative adsorption of O 2 at 300 K destroyed the alloys and the results of AP-XPS pointed to the co-existence of two types of oxygen species on the surface: ZnO x and chemisorbed O atoms (O chem ) on Au or the Au-ZnO interface. Annealing from room temperature to 600 K induced a O chem → ZnO x transformation that reflected the poor stability of O atoms on Au(111). The Zn-Au(111) systems exhibited a reactivity towards CO 2 that was much larger than that seen for Au(111), Cu(111) or surfaces of late transition metals like, Ni, Pd or Pt. At 300 K, CO 2 underwent partial dissociation depositing large amounts of O chem on the surface with minor formation of ZnO x . In addition, the deposited O chem reacted with CO 2 to form surface carbonate groups. Dosing of CO 2 at 500-600 K mainly led to the formation of ZnO x and the surface carbonate almost disappeared. In the presence of hydrogen, i.e. reaction feeds with a CO 2 to H 2 ratio of 1:3, the surface chemistry at 300 K was very similar to that seen for pure CO 2 with the formation of ZnO x and carbonate groups. In contrast, at 500-600 K, reaction with hydrogen induced the removal of ZnO x and CO 3 /HCOO species. Finally, our AP-XPS results are consistent with the idea that CO 2 hydrogenation on AuZn alloys involves a redox process where there is sequential oxidation by CO 2 and reduction by H 2 to yield methanol.

36 MATERIALS SCIENCE↗
DOE OSTI2025

The Surface Chemistry of Methanol on Cu 3 Pd(111): Effects of Metal Alloying and Reaction with Hydrogen

Synchrotron-based ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) was used to study the adsorption and surface chemistry of methanol on a Cu 3 Pd(111) model surface. The composition and morphological properties of the pristine Cu 3 Pd(111) substrate were analyzed using a combination of low-energy electron diffraction (LEED), scanning tunneling microscopy (STM), and low-energy ion scattering (LEIS). The results of ion scattering showed segregation of Pd toward the surface, with a Pd/Cu ratio close to 0.5, a larger value than the ratio of 0.33 expected for a Cu 3 Pd bimetallic structure. The surface of the alloy exhibited a good LEED pattern with three-fold long-range periodicities. In STM, clusters of palladium with hexagonal arrays and Pd- Pd distances of 2.7-2.8 Å were detected. Bonding to copper perturbed the electronic properties of the atoms in the Pd clusters, shifting their 4d states toward higher binding energy with respect to the Fermi level. Further, the valence band spectrum of Cu 3 Pd(111) exhibited a line shape that was very different from those displayed by Cu(111) or Pd(111). At low pressures, the adsorption of methanol on Cu 3 Pd(111) at 300 K mainly produced CH 3 O, CO and CH x species. AP-XPS showed that most Pd atoms in the surface of the Cu 3 Pd(111) alloy interacted with the decomposition products of methanol. No significant changes were observed in the core levels of copper upon the adsorption and dissociation of methanol, suggesting that the molecule mainly interacted with Pd sites of the alloy. Reaction with hydrogen led to fast removal of CH x , C and PdC x species from Cu 3 Pd(111) at moderate (< 450 K) temperatures and prevented a CH x → C transformation. If the stability of adsorbed CH 3 O is used as a descriptor for the hydrogenation of CO 2 to methanol, Cu 3 Pd should be a much better catalyst than monometallic palladium. This may be a consequence of electronic and ensemble effects in the alloy that moderate the reactivity of Pd sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Redox Couples Control Band Bending, Photovoltage, and Quasi-Fermi Levels in Tungsten Oxide (WO 3 ) Photoanodes

Tungsten oxide (WO 3 ) is a well-known photoanode and photocatalyst for photoelectrochemical (PEC) water oxidation. Because the compound has a deep valence band, it can facilitate the oxygen evolution reaction without added cocatalysts, and it can drive the oxidation of species with much higher electrochemical potentials, including the conversion of water to hydrogen peroxide, sulfate to persulfate, and iodate to meta-periodate. Here, we use the liquid vibrating Kelvin probe surface photovoltage (liquid VK-SPV) technique in combination with open circuit potential (OCP) and photoelectrochemical (PEC) scans to assess the possibility of reaching such oxidizing potentials in aqueous electrolytes and at open circuit. Here, this is done by mapping the quasi-Fermi levels of electrons and holes at the interfaces as a function of the light intensity. Nanostructured WO 3 photoelectrodes for this purpose were fabricated by thermal annealing of a tungstic acid solution on fluorine-doped tin oxide. Electrochemical measurements are conducted at open circuit and 400 nm LED light illumination in electrolytes containing fast (O 2 /H 2 O 2 ), slow (O 2 /H 2 O), and very oxidizing (NaIO 4 /NaIO 3 ) redox couples. Photovoltage values scale with the light intensity and with the built-in potential for each redox couple and reach values up to 0.61 V under 20 mW cm –2 illumination for the NaIO 4 electrolyte. This shows that the photoelectrodes behave like Schottky-type diodes whose maximum possible energy output is determined mainly by the built-in voltage of each junction. For slow redox couples, the quasi-Fermi level of the holes increases with light intensity due to hole accumulation at the WO 3 –liquid interface. For example, for the O 2 /H 2 O electrolyte, interfacial hole accumulation and removal occur on the 90–300 s time scale. For the fast hole acceptor H 2 O 2 , on the other hand, the quasi-Fermi level of the photoholes is pinned to the electrochemical potential of the O 2 /H 2 O 2 couple. This limits the energy conversion efficiency of the electrode. Overall, these results reveal the influence of charge transfer thermodynamics and kinetics on the photovoltage of WO 3 . Furthermore, the work further establishes VK-SPV as a contactless method to observe the photovoltage, carrier dynamics, and quasi-Fermi levels of semiconductor-liquid junctions.

Electrodes↗
DOE OSTI2025

Atomistic Insights into the Reactive Diffusion of CO 2 in Guanidine-Based Facilitated Transport Membranes

The pressing need to address climate change has led to significant advancements in carbon dioxide (CO 2 ) capture technologies. Notably, facilitated transport membranes (FTMs) are distinguished by their exceptional selectivity and permeance, attributed to their reversible chemical reactions with CO 2 . This study, for the first time, sheds light on the reactive diffusion mechanism of CO 2 in FTMs, utilizing 1,1,3,3-tetramethylguanidine (TMG) as a mobile carrier. Specifically, state-ofthe- art molecular dynamics (MD) simulations, augmented by a reparameterized reactive force field (ReaxFF) capable of describing atomistic interactions and reaction pathways, are conducted to investigate the transport of CO 2 in TMG. The analysis of mean squared displacement (MSD) and diffusion coefficients reveals a clear hierarchy in the mobility of reaction components. Our findings highlight a unique hopping diffusion mechanism between bicarbonate ions and TMG molecules, increasing the diffusivity of reacted CO 2 by 1.4 times. The hopping events observed not only enhance our understanding of molecular mobility but also offer a means to boost the performance of FTMs in CO 2 capture applications. Overall, this research lays the groundwork for the future design of FTMs with optimal carrier properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

ReaxFF Parameter Set for Boron Clusters and Icosahedral Boron Crystals: Comparison with Density Functional Theory and Machine-Learning Potentials

Icosahedral boron materials, which include regular icosahedra of 12 boron atoms have gained increasing attention due to their potential applications as superhard materials, semiconductors, and energy storage media. However, the synthesis of high quality crystals of these materials has been a major barrier to the development of these applications. To enable computational prediction of synthesis conditions yielding high-quality icosahedral boron crystals, herein we tested and refined a set of ReaxFF parameters for the nucleation and growth of such crystals. We focused on matching the relative energies of small boron clusters obtained by density functional theory since such small clusters and similar motifs are likely present in crystal nuclei and at the interface of growing crystals. Using a training set of B 80 clusters, including a low-energy core–shell structure containing a B 12 icosahedron core and a high-energy single-shell structure produced in preliminary ReaxFF simulations, the ReaxFF parameter set was refined to better reproduce energies calculated by density functional theory (DFT). Among existing ReaxFF parameter sets and the machine-learning interatomic potentials MACE-MP-0, MACE-MP-0b3, MACE-MPA-0, PFP v7.0.0, and SevenNet-MF-ompa, only our new parameter set and PFP v7.0.0 correctly ranked these B 80 clusters. This refinement led to improved agreement with DFT for a test set of 58 clusters consisting of 8–103 boron atoms. Furthermore, our refined parameter set yielded greater local icosahedral structure than the previously existing ReaxFF parameter set for larger scale simulations of crystallization from supercooled liquid boron. Additionally, simulations of solid boron in contact with molten nickel using our refined ReaxFF parameters yielded a boron solubility value that agrees moderately well with experimental expectations, while the previous boron parameters gave a value that was much too low.

boron↗
DOE OSTI2025

Transient Studies of CO 2 Adsorption over CeO 2 Nanostructures with In Situ DRIFTS and Modulation Excitation

Experiments of in-situ DRIFTS combined with modulation excitation (ME) spectroscopy showed a rich surface chemistry associated with the adsorption of CO 2 on nanocubes and nanospheres of ceria. The nanocubes exposed faces with a (100) orientation, with the edges and corners displaying (110) and (111) orientations, respectively. Here, the nanospheres mainly contained ceria (111) and (110) planes. DFT calculations showed that CO 2 is a multidentate adsorbate on ceria that can undergo changes in its bonding configuration depending on the chemical environment. At 250 °C, a temperature typically used for the conversion of CO 2 into oxygenates, alkanes and olefins, CO 2 reacted with O centers or OH groups present on the nanocubes and nanospheres to yield bi- and tri-dentate carbonates, hydroxycarbonates, and formates. Both nanostructures were highly reactive and a dynamic equilibrium was established: carbonate species were rapidly generated upon the injection of CO 2 and they decomposed upon the removal of CO 2 from the gas phase. In the case of the ceria nanocubes, the adsorption/desorption processes were essentially reversible, opening the door to catalytic transformations. A larger concentration of defects in the ceria nanospheres led to strongly bound carbonates and formates that may be spectators, site blockers, or surface modifiers in catalytic processes. In the ME studies, additional intermediates were detected, and it was clear that the response of surface species to the presence/absence of CO 2 was highly dependent on the morphology of the ceria nanostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Comment on “Localized and Delocalized States of a Diamine Cation: Resolution of a Controversy”

Since its appearance in and recent re-investigation in the dimethylpiperazine cation (DMP + ) has generated considerable discussion and controversy in the scientific literature over the existence of stable, local energy minima in this molecular system. Specifically, prior assumptions that the Rydberg state and radical cation of DMP are similar have led to significant confusion and debate regarding the accuracy of various quantum chemistry methods and the existence of stable configurations of DMP+ itself. The purpose of this Viewpoint is to highlight recent studies that call into question the main findings in the previously mentioned works as well as present new CCSDT (Coupled-Cluster with Single, Double, and Triple excitations) calculations to finally bring closure to this controversy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Protein–Protein Interaction Networks Derived from Classical and Machine Learning-Based Natural Language Processing Tools

The study of protein-protein interactions (PPIs) provides insight into various biological mechanisms, including the binding of antibodies to antigens, enzymes to inhibitors or promoters, and receptors to ligands. Recent studies of PPIs have led to significant biological breakthroughs. For example, the study of PPIs involved in the human:SARS-CoV-2 viral infection mechanism aided in the development of the SARS-CoV-2 vaccines. Though several databases exist for the manual curation of PPI networks, text mining methods have been routinely demonstrated as useful alternatives for newly studied or understudied species where databases are incomplete. Here, the relationship extraction (RE) performance of several open-source classical text processing, machine learning (ML)-based natural language processing (NLP), and large language model (LLM)-based NLP tools were compared. Overall, our results indicated that networks derived from classical methods tend to have high true positive rates at the expense of having overconnected-networks, ML-based NLP methods have lower true positive rates but networks with the closest structures to the target network, and LLM-based NLP methods tend to exist in-between the two other approaches, with variable performances. Finally, the selection of a specific NLP approach should be tied to the needs of a study and text availability, as models varied in performance due to the amount of text provided.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Signatures of Thermoreversible Associations in X-ray and Neutron Scattering from Dilute Polyzwitterion Solutions

In aqueous solutions of polyzwitterions (PZs), an interplay between dipole–dipole interactions and hydration of zwitterionic groups can lead to thermoreversible associations, which have been difficult to detect in experiments. Here, in this study, we investigated dilute aqueous solutions of poly(1-(3-sulphonatopropyl)-2-vinylpyridinium) (P2VPPS) using small-angle X-ray and neutron scattering (SAXS and SANS) to probe the structure and neutron spin-echo (NSE) spectroscopy to probe dynamics. The SAXS and SANS data show that the correlation length increases with an increase in the concentration of P2VPPS for three different molecular weights. The addition of 0.1 M NaCl to one of the solutions led to almost no dependence of the correlation length on the concentration. Such a concentration dependence of the correlation length suggests the formation of clusters driven by thermoreversible associations in the solutions. The NSE measurements show that the solutions with a larger correlation length display slower relaxation, reflecting the reduced mobility of larger clusters. These results should be considered as signatures of thermoreversible associations in the solutions of P2VPPS. To establish a quantitative link between local structure (clusters) and dynamics in dilute solutions of P2VPPS, we combined a thermoreversible gelation theory for the structure of PZ solutions (Li, S.-F.; Muthukumar, M. Theory of Thermoreversible Gelation and Anomalous Concentration Fluctuations in Polyzwitterion Solutions. J. Chem. Phys. 2024, 161, 024903) with a model for the dynamics of the clusters (generalized Zimm model), developed in this work. Using such a theoretical framework, we have predicted the distribution of clusters in the solutions probed with SANS and SAXS. With the distributions, the generalized Zimm model has been used to extract the diffusion constant of the clusters and their characteristic size from the NSE data, where the latter agrees with the values estimated from the SAXS/SANS data. These findings confirm the presence of thermoreversible associations and establish a quantitative link between local structure (clusters) and dynamics in dilute solutions of P2VPPS. Furthermore, with growing interest in technological applications, this work can provide useful insights into the structural and dynamical properties of other PZ solutions.

field theory↗
DOE OSTI2025

Solvent Determines the Formation Pathway in Sol–Gel Synthesized Disordered Rock Salt Material for Lithium Ion Battery Application

The increasing demand for lithium-ion batteries with high capacity and cycling stability, in combination with the scarcity of cobalt and nickel, has led to significant efforts to develop new cathode materials based on earth-abundant transition metals. Mn- and Ti-based disordered rock salt (DRX) cathodes are promising candidates fulfilling these requirements. However, their large-scale fabrication can be energy- and time-intensive using traditional fabrication methods, e.g., solid-state synthesis. The present study showcases sol-gel synthesis as an alternative method with control over the crystallization pathway through solvent choice. Dimethylformamide (DMF) aids the homogenization of the transition metals during early crystallization stages and formation of Li2TiO3 and LiMn2O4 intermediates before the DRX phase is formed. In contrast, 2-methoxyethanol (2-ME) shows transition metal segregation and formation of an additional transition metal intermediate (Ti2MnO4) while not resulting in phase-pure DRX material after calcination. Coin cells prepared with DMF-material yield higher capacity and cycling stability compared with 2-ME material.

Kodalle, Tim↗