Search NASA⌕ Search

SEARCH · Search NASA

Results for “Lidar polarization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Lidar Electro-Optic Beam Switch with a Liquid Crystal Variable Retarder

A document discusses a liquid crystal variable retarder, an electro-optic element that changes the polarization of an optical beam in response to a low-voltage electronic signal. This device can be fabricated so that the element creates, among other states, a half-wave of retardance that can be reduced to a very small retardance. When aligned to a polarized source, this can act to rotate the polarization by 90 in one state, but generate no rotation in the other state. If the beam is then incident on a polarization beam splitter, it will efficiently switch from one path to the other when the voltage is applied. The laser beam switching system has no moving parts, improving reliability over mechanical switching. It is low cost, tolerant of high laser power density, and needs only simple drive electronics, minimizing the required system resources.

Baer, James↗

Design of a Direct-Detection Wind and Aerosol Lidar for Mars Orbit

The present knowledge of the Mars atmosphere is greatly limited by a lack of global measurements of winds and aerosols. Hence, measurements of height-resolved wind and aerosol profiles are a priority for new Mars orbiting missions. We have designed a direct-detection lidar (MARLI) to provide global measurements of dust, winds and water ice profiles from Mars orbit. From a 400-km polar orbit, the instrument is designed to provide wind and backscatter measurements with a vertical resolution of 2 km and with resolution of 2° in latitude along track. The instrument uses a single-frequency, seeded Nd:YAG laser that emits 4 mJ pulses at 1064 nm at a 250 Hz pulse rate. The receiver utilizes a 50-cm diameter telescope and a double edge Fabry-Pérot etalon as a frequency discriminator to measure the Doppler shift of the aerosol-backscatter profiles. The receiver also includes a polarization-sensitive channel to detect the cross-polarized backscatter profiles from water ice. The receiver uses a sensitive 4 × 4 pixel HgCdTe avalanche photodiode array as a detector for all signals. Here we describe the measurement concept, instrument design, and calculate its performance for several cases of Mars atmospheric conditions. The calculations show that under a range of atmospheric conditions MARLI is capable of measuring wind speed profiles with random error of 2–4 m/s within the first three scale heights, enabling vertically resolved mapping of transport processes in this important region of the atmosphere.

Cremons, Daniel R.↗

Using CATS Near-Real-time Lidar Observations to Monitor and Constrain Volcanic Sulfur Dioxide (SO2) Forecasts

An eruption of Italian volcano Mount Etna on 3 December 2015 produced fast-moving sulfur dioxide (SO2) and sulfate aerosol clouds that traveled across Asia and the Pacific Ocean, reaching North America in just 5 days. The Ozone Profiler and Mapping Suite's Nadir Mapping UV spectrometer aboard the U.S. National Polar-orbiting Partnership satellite observed the horizontal transport of the SO2 cloud. Vertical profiles of the colocated volcanic sulfate aerosols were observed between 11.5 and 13.5 km by the new Cloud Aerosol Transport System (CATS) space-based lidar aboard the International Space Station. Backward trajectory analysis estimates the SO2 cloud altitude at 7-12 km. Eulerian model simulations of the SO2 cloud constrained by CATS measurements produced more accurate dispersion patterns compared to those initialized with the back trajectory height estimate. The near-real-time data processing capabilities of CATS are unique, and this work demonstrates the use of these observations to monitor and model volcanic clouds.

space↗

Cirrus Cloud Top-of-the-Atmosphere Net Daytime Forcing in the Alaskan Subarctic from Ground-Based MPLNET Monitoring

Cirrus cloud daytime top-of-the-atmosphere radiative forcing (TOA CRF) is estimated for a two-year NASA Micro-Pulse Lidar Network (532 nm; MPLNET) dataset collected at Fairbanks, Alaska. Two-year averaged daytime TOA CRF is estimated at between -1.08 and 0.78 W·m-2 (-0.49 to 1.10 W·m-2 in 2017, and -1.67 to 0.47 W·m-2 in 2018). This subarctic study completes a now trilogy of MPLNET ground-based cloud forcing investigations, following midlatitude and tropical studies by Campbell et al. (2016; C16) at Greenbelt, Maryland and Lolli et al. (2017) at Singapore. C16 hypothesize a global meridional daytime TOA CRF gradient that begins positive at the equator (2.20 – 2.59 W·m-2 over land and -0.46 – 0.42 W·m-2 over ocean at Singapore), becomes neutral in the midlatitudes (0.03 – 0.27 W·m-2 over land in Maryland) and turns negative moving poleward. This study does not completely confirm C16, as values are not found as exclusively negative. Evidence in historical reanalysis data suggests that daytime cirrus forcing in and around the subarctic likely once was exclusively negative. Increasing tropopause heights, inducing higher and colder cirrus, have likely increased regional forcing over the last forty years. We hypothesize that subarctic inter-annual cloud variability is likely a considerable influence on global cirrus cloud forcing sensitivity, given the irregularity of polar versus midlatitude synoptic weather intrusions. This study and hypothesis lays basis for an extrapolation of these MPLNET experiments to satellite-based lidar cirrus cloud datasets.

James R Campbell↗

Lidar and Mission Parameter Trade Study of Space-Based Coherent Wind Measurement Centered on NASA's 2006 GWOS Wind Mission Study Parameters

The global measurement of vertical profiles of horizontal vector winds has been highly desired for many years by NASA, NOAA and the Integrated Program Office (IPO) implementing the National Polar-orbiting Operational Environmental Satellite Systems (NPOESS). Recently the global wind mission was one of 15 missions recommended to NASA by the first ever NRC Earth Sciences Decadal Survey. Since before 1978, the most promising method to make this space-based measurement has been pulsed Doppler lidar. The favored technology and technique has evolved over the years from obtaining line-of-sight (LOS) wind profiles from a single laser shot using pulsed CO2 gas laser technology to the current plans to use both a coherent-detection and direct-detection pulsed Doppler wind lidar systems with each lidar employing multiple shot accumulation to produce an LOS wind profile. The idea of using two lidars (hybrid concept) entails coherent detection using the NASA LaRC-developed pulsed 2-micron solid state laser technology, and direct detection using pulsed Nd:YAG laser technology tripled in frequency to 355 nm wavelength.

Kavaya, Michael J.↗

Antarctic polar stratospheric cloud composition as observed by ACE, CALIPSO and MIPAS

The composition of polar stratospheric clouds (PSCs) in the Antarctic is measured by infrared absorption spectroscopy by the Atmospheric Chemistry Experiment (ACE) satellite and compared to lidar (CALIPSO) and emission spectroscopy (MIPAS) results. ACE observations are compared first to CALIPSO for the period 2006–2020, then to MIPAS for the period 2005–2011, and then a set of triple coincidences is studied. In both CALIPSO-ACE and MIPAS-ACE comparisons, nitric acid trihydrate (NAT) detections are in excellent agreement (∼80 % of coincident compositions is found). Supercooled ternary solution (STS) detections are in good agreement for CALIPSO-ACE (∼60 %) but in poor agreement for MIPAS-ACE (39 %). This contrasts with ice detections, in poor agreement for CALIPSO-ACE (∼30 %) and in better agreement for MIPAS-ACE (45 %). Triple coincidences show that ACE STS detections are more reliable than MIPAS STS detections. The comparison between ACE observations and homogeneous CALIPSO PSCs shows that for 11 events, CALIPSO reports STS rather than supercooled nitric acid (SNA) clouds.

Atmospheric Chemistry Experiment↗

Observations of Ozone-aerosol Correlated Behaviour in the Lower Stratosphere During the EASOE Campaign

The question of possible interactions between ozone and stratospheric aerosol has been open for a long time. Measurements carried out after the Mt. Agung and El Chicon eruptions showed evidence of negative correlations between the presence of volcanic stratospheric aerosols and ozone concentration. Evidence for negative correlations in the polar winter has been also found. It is only after the discovery of the Antarctic ozone hole that catalytic effects related to low temperature heterogeneous chemistry have become the object of much investigation, now extended to the role of volcanic aerosol in the ozone reduction. These phenomena can be the object of various interpretations, not mutually exclusive, including the effect of transport, diffuse radiation as well as heterogeneous chemistry. The present paper provides preliminary results of simultaneous measurements of ozone and aerosol, carried out at Thule, Greenland, during the winter 1991-92. The European Stratospheric Ozone Experiment (EASOE) was aimed at monitoring the winter Arctic stratosphere in order to obtain a deeper insight of the ozone destruction processes taking place in the polar regions. A large amount of aerosol was injected into the lower stratosphere by the recent eruption of Volcano Pinatubo. A lidar system, already operational in Thule since November 1990, has provided detailed measurements of the stratospheric aerosol concentration during EASOE. In the same period, a large number of ozonesondes were launched. Although no PSC formation was detected over Thule, the simultaneous measurement of the stratospheric aerosol and ozone profiles give the possibility to study interactions occurring in the stratosphere between these two constituents.

Digirolamo, P.↗

Lidar depolarization by nonspherical particles: Potential of combined depolarization/backscattering measurements for PSC's characterization

We analyze the potential of combined backscatter and depolarization information for deriving the optical parameters of Polar Stratospheric Clouds (PSCs) together with the size and physical phase of the cloud particles. In particular, we investigate the influence of particle shape and orientation on the parallel and perpendicular backscattered intensities and on the depolarization ratio under experimental noise conditions, and how the first three moments of the particle size distribution (i.e., particle concentration, mean radius, and standard deviation) may be used to introduce further distinction between type Ia and type Ib PSCs.

Flesia, C.↗

Efficient Ho:LuLiF MOPA Laser Transmitter for Space Pathfinder Coherent Wind Lidar

Supported by NASA’s Earth Science Technology Office (ESTO), a new lidar transmitter system is developed under the Wind-Space Pathfinder coherent wind lidar project. It is an efficient Ho:LuLiF master oscillator power amplifier system (MOPA) that is capable of generating 15 watts power and 180 ns pulse width at 200 Hz PRF with excellent beam quality. The laser is injection seeded to provide stable single longitudinal frequency output. The laser beam polarization can be switched between “S” and “P” alternatively. Thus, the “S” and “P” beams can be directed to two separate telescopes at different directions to provide true horizontal wind measurement without a moving part in the lidar system. The laser power, pulse width and beam quality fulfill the space lidar system’s figure-of-merit (FOM) and measurement accuracy requirements.

Coherent laser radar↗

Efficient Ho:LuLiF MOPA Laser Transmitter for Space Pathfinder Coherent Wind Lidar

Supported by NASA’s Earth Science Technology Office (ESTO), a new lidar transmitter system is developed under the Wind-Space Pathfinder coherent wind lidar project. It is an efficient Ho:LuLiF master oscillator power amplifier system (MOPA) that is capable of generating 15 watts power and 180 ns pulse width at 200 Hz PRF with excellent beam quality. The laser is injection seeded to provide stable single longitudinal frequency output. The laser beam polarization can be switched between “S” and “P” alternatively. Thus, the “S” and “P” beams can be directed to two separate telescopes at different directions to provide true horizontal wind measurement without a moving part in the lidar system. The laser power, pulse width and beam quality fulfill the space lidar system’s figure-of-merit (FOM) and measurement accuracy requirements.

Coherent Laser Radar↗

Polarization effects, tasks 3 and 4

The LP-140 is a commercial pulsed CO2 laser system. An attempt was made to convert this workhorse laser into a device suitable for coherent LIDAR applications. This required initial laser characterization, and system modification. The key changes which enabled the laser to display encouraging characteristics are: increased cavity length; increased gas flow; gas mixture modification; and power supply redesign. With suitable modifications, the LP-140 becomes a viable candidate for a coherent LIDAR.

Jaenisch, H. M.↗

Global View of Aerosol Vertical Distributions from CALIPSO Lidar Measurements and GOCART Simulations: Regional and Seasonal Variations

This study examines seasonal variations of the vertical distribution of aerosols through a statistical analysis of the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) lidar observations from June 2006 to November 2007. A data-screening scheme is developed to attain good quality data in cloud-free conditions, and the polarization measurement is used to separate dust from non-dust aerosol. The CALIPSO aerosol observations are compared with aerosol simulations from the Goddard Chemistry Aerosol Radiation Transport (GOCART) model and aerosol optical depth (AOD) measurements from the MODerate resolution Imaging Spectroradiometer (MODIS). The CALIPSO observations of geographical patterns and seasonal variations of AOD are generally consistent with GOCART simulations and MODIS retrievals especially near source regions, while the magnitude of AOD shows large discrepancies in most regions. Both the CALIPSO observation and GOCART model show that the aerosol extinction scale heights in major dust and smoke source regions are generally higher than that in industrial pollution source regions. The CALIPSO aerosol lidar ratio also generally agrees with GOCART model within 30% on regional scales. Major differences between satellite observations and GOCART model are identified, including (1) an underestimate of aerosol extinction by GOCART over the Indian sub-continent, (2) much larger aerosol extinction calculated by GOCART than observed by CALIPSO in dust source regions, (3) much weaker in magnitude and more concentrated aerosol in the lower atmosphere in CALIPSO observation than GOCART model over transported areas in midlatitudes, and (4) consistently lower aerosol scale height by CALIPSO observation than GOCART model. Possible factors contributing to these differences are discussed.

Yu, Hongbin↗

Prelaunch optical characterization of the Laser Geodynamic Satellite (LAGEOS 2)

The optical range correction (the distance between the apparent retroreflective skin of the satellite and the center of mass) of the LAGEOS 2 was determined using computer analysis of theoretical and experimentally measured far field diffraction patterns, and with short pulse lasers using both streak camera-based range receivers and more conventional PMT-based range receivers. The three measurement techniques yielded range correction values from 248 to 253 millimeters dependent on laser wavelength, pulsewidth, and polarization, location of the receiver in the far field diffraction pattern and detection technique (peak, half maximum, centroid, or constant fraction). The Lidar cross section of LAGEOS 2 was measured at 4 to 10 million square meters, comparable to the LAGEOS 1.

Minott, Peter O.↗

The geoscience laser altimeter system (GLAS)

GLAS is a space-based lidar designed for NASA's Earth Science Enterprise's Icesat Mission. It is being designed to precisely measure the heights of the polar ice sheets, to determine the height profiles of the Earth's land topography, and to profile the vertical structure of clouds and aerosols on a global scale. GLAS will fly on a small dedicated spacecraft in a polar orbit at 598 km altitude with an inclination of 94 degrees. The instrument is being developed to launch in July 2001 and to operate continuously at 40 Hz for a minimum of 3 years with a goal of 5 years.

Abshire, James B.↗

Radiative feedback of polar stratospheric clouds on Antarctic temperatures

A one-dimensional time marching radiative transfer model has been used to investigate the potential effects of polar stratospheric clouds (PSCs) on winter and spring temperatures in the Antarctic lower stratosphere. High, middle, and low PSC amounts were specified from lidar backscatter profiles and were chosen to represent the likely range of PSC amounts present in the Antarctic region. The computed effects of the PSCs on temperatures depend strongly on the surface temperature and on the extent of tropospheric cloudiness, and range from a maximum increase of 6 K for a high amount of PSCs over a warm surface and clear troposphere to a maximum decrease of 2 K for a high amount of PSCs over a cold surface and a troposphere with high clouds. The average effect is unlikely to be more than a 1 or 2 K temperature change.

Rosenfeld, Joan E.↗

Observations of multi-layered clouds using K-band radar

Rudimentary ground-based K-band radars were once used by the U.S. Air Force to monitor clouds over air bases. The NOAA wave Propagation Laboratory has developed a significantly advanced dual-polarization Doppler K-band system that provides remarkably detailed visualizations of the structure and kinematics of nonprecipitating and weakly precipitating clouds. Unlike lidar and infrared radiometer systems, K-band radar can penetrate liquid water cloud layers and obtain measurements through moderate rainfall and heavy snowfall to reveal intricate cloud features including multiple layers of cloud. This is accomplished at less cost than would be possible with traditional longer wavelength weather radars. The radar's capabilities have been demonstrated in several recent cloud research field projects. In combination with measurements by other remote sensors, the radar can help detect aircraft icing hazards and infer microphysical properties of clouds. An automated, unattended version of the radar could provide a continuous, detailed depiction of the cloud environment in the vicinity of airports.

Martner, Brooks E.↗

Airborne Measurements of Cirrus Reflectance and Heights with Comparison to Polder Observations

The NASA ER-2 high altitude aircraft cloud observation experiment includes visible, infrared and microwave radiometric imaging of cloud tops and combined lidar profiling of cloud tops. A special instrument is the Tilt Scan CCD Camera (TSCC) for measurements of cloud top multidirectional reflectance and polarization. Data have been acquired on the bi-directional reflectance of cirrus in the FIRE, TOGA/COARE, SUCCESS and WINCE cloud observation experiments. The FIRE, TOGA/COARE and SUCCESS observations include some cases of combined in situ crystal measurements and in all measurements, multispectral visible/IR cirrus microphysics retrievals are possible. The results for bi-directional reflectance for mid-latitude cirrus in the FIRE and SUCCESS missions are consistent with models for complex, multi-type crystal structure. These may be contrasted with tropical cirrus observation for which results are more typical of simple crystal structure. The cirrus multidirectional results may be compared and contrasted with those available from POLDER. In addition, during the WINCE experiment of January 1997 there were several targeted ER-2 for cloud observation underflights of POLDER on ADEOS, Comparison of direct cloud height measurement and multispectral radiometer analysis from ER-2 data with POLDER results are made.

Spinhirne, James↗

Doppler lidar wind measurements on the EOS - LAWS

This paper discusses the efforts currently underway to prepare for the deployment of the Laser Atmospheric Wind Sounder (LAWS) instrument on an Earth Observing System (EOS) polar orbiter and on the Space Station. Attention is given to the measurement techiques, which include ground-based and airborne measurements in the atmosphere, and to the scientific and the technical issues being addressed. Global wind profiles obtained with the LAWS will effect dramatic improvement in numerical weather prediction and will be useful in determining the midtroposphere steering currents that are important in hurricane track forecasts. The global wind data will also provide information on large-scale atmospheric circulation and climate dynamics and on biogeochemical and hydrologic cycles.

Fitzjarrald, Daniel E.↗