SEARCH · Search NASA

Results for “Maneuver”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

All sources NASA NTRS DOE OSTI

NASA NTRS1974

Maneuver strategies for the extended Pioneer 11 Jupiter/Saturn mission

The Jupiter-bound Pioneer 11 spacecraft was launched in April 1973, eight months before the Jupiter encounter of the front-running spacecraft, Pioneer 10. Near-Earth maneuvers placed Pioneer 11 on an interim flight path designed to retain a later retargeting capability to repeat the Pioneer 10 flyby geometry or encounter a wide variety of alternate Jupiter aimpoints, including one resulting in an extended five-year trajectory to Saturn. Pioneer 11 was retargeted to this aimpoint in April 1974, subsequent to the successful Pioneer 10 encounter in December 1973. This paper presents the retargeting and trimming maneuver strategies necessary to assure a productive Pioneer 11 Jupiter encounter in early December 1974, followed by a Saturn encounter in late 1979.

Frauenholz, R. B.↗

NASA NTRS1975

Multiple rendezvous maneuvers at synchronous altitude

Rendezvous techniques between synchronous satellites were found using a cotangential elliptic phasing (CEP) transfer. This transfer is a closed elliptic orbit which is cotangent to the synchronous orbits of the chase vehicle and target satellite. The cotangent point lies on the line of apsides of the transfer orbit which coincides with the line of intersection of the synchronous orbits. The rendezvous maneuvers accomplish plane changes and phase shifts simultaneously, and these maneuvers are found to be optimal when the plane change is split equally between the velocity increments. The CEP transfer can be extended to several revolutions for a further reduction of fuel usage. A set of synchronous satellites was used in a simulated mission. An optimal sequence for rendezvous among these satellites was established such that the total sum of velocity increments is within the realm of estimated 1980 technology.

Creehan, E. J., Jr.↗

NASA NTRS1975

Premission and postmission simulation studies of the foot-controlled maneuvering unit for Skylab experiment T-020

A Skylab experiment was conducted to study the maneuvering capabilities of astronauts using a relatively simple self-locomotive device, referred to as the foot-controlled maneuvering unit, and to evaluate the effectiveness of ground-based facilities simulating the operation of this device in weightless conditions of space. Some of the special considerations given in the definition and development of the experiment as related to the two ground-based simulators are reviewed. These simulators were used to train the test subjects and to obtain baseline data which could be used for comparison with the in-flight tests that were performed inside the Skylab orbital workshop. The results of both premission and postmission tests are discussed, and subjective comparisons of the in-flight and ground-based test conditions are presented.

Hewes, D. E.↗

NASA NTRS1975

A g-load display for remotely piloted vehicles and other aircraft that are subject to maneuvering constraints

The absence of kinesthetic cues deprives RPV pilots of essential feedback, particularly during high speed maneuvers. A display was designed to facilitate pilot control of g loads and to permit an immediate indication of g-load constraint violations. The display embodies all the motion vector components that contribute to maneuvering accelerations. In one mode of operation, the device displays the components of angular velocity as variable length pointers emanating from the center of a circle whose radius is determined by the linear velocity of the vehicle. An alternative mode of operation permits the pilot to select a display in which g loads are presented directly as variable length pointers emanating from the center of a circle whose radius is again determined by the linear velocity of the vehicle. Each circle defines a safe region of operation, and penetration of the circumference of the appropriate circle by a pointer implies that the structural design load was exceeded.

Howard, J. C.↗

NASA NTRS1975

An adaptive maneuvering logic computer program for the simulation of one-to-one air-to-air combat. Volume 2: Program description

A detailed description is presented of the computer programs in order to provide an understanding of the mathematical and geometrical relationships as implemented in the programs. The individual sbbroutines and their underlying mathematical relationships are described, and the required input data and the output provided by the program are explained. The relationship of the adaptive maneuvering logic program with the program to drive the differential maneuvering simulator is discussed.

Burgin, G. H.↗

NASA NTRS1974

Status report on Astronaut Maneuvering Equipment

The objectives of the Skylab experiment M509 were related to the development and the use of an Astronaut Maneuvering Unit (AMU). Through the actual orbital flight tests, the experiment has produced invaluable data to verify and extend previous ground-based research. AMU equipment and operating modes are considered along with flight plans, crew operations, and the maneuvering test plan. Attention is also given to orbital test results, a subjective evaluation, and actual and simulator flight assessment.

Mccandless, B., II↗

NASA NTRS1976

Effect of hinge-moment parameters on elevator stick forces in rapid maneuvers

The importance of the stick force per unit normal acceleration as a criterion of longitudinal stability and the critical dependence of this gradient on elevator hinge moment parameters are investigated with special reference to transient effects for maneuvers of short duration. The analysis shows that different combinations of elevator parameters, which give the same stick force per unit acceleration in turns, give widely different force variations during the entries into and recoveries from steady turns and during maneuvers of short duration such as abrupt pull-ups. The stick force per unit acceleration is greater for abrupt than for gradual control movements.

Jones, R. T.↗

NASA NTRS1975

Long-range energy-state maneuvers for minimum time to specified terminal conditions

The calculus of variations and energy-state approximation are used to determine the optimum maneuvers in three-dimensional minimum-time aircraft flight paths to a specified final point or line. Constraints on thrust, Mach number, angle of attack, dynamic pressure, and load factor are included. It is shown that when the initial range is sufficiently large that the maximum velocity constraint is encountered en route, the calculation of minimum-time maneuvers can be greatly simplified by a separation of arcs into two two-parameter problems. Suboptimal paths along which the bank angle is restricted to three discrete values (negative maximum angle, 0, positive maximum angle) compare favorably with the optimum, continuous bank angle solutions for transonic speeds and below.

Parsons, M. G.↗

NASA NTRS1976

Stability and control of maneuvering high-performance aircraft

Stability and control characteristics of a high-performance aircraft have been examined over a wide range of maneuvering flight conditions, in order to identify general rules for the design of departure-preventing control systems. This has been accomplished using fully coupled linear dynamic models which account for nonzero mean values of aerodynamic angles and angular rates. Stability augmentation systems derived from optimal control theory are shown to maintain stable, well-damped aircraft dynamics over a wide range of maneuvering flight conditions. This design approach generates cross-feeds and control interconnects (as well as conventional feedback terms) for improved aircraft stability.

Stengel, R. F.↗

NASA NTRS1977

Transonic wind-tunnel investigation of the maneuver potential of the NASA supercritical wing concept, phase 1

An investigation was conducted in the NASA Langley 8-foot transonic pressure tunnel at Mach numbers from 0.60 to 0.975 with a variable-wing-sweep airplane model in order to evaluate a series of wings designed to demonstrate the maneuver potential of the supercritical airfoil concept. Both conventional and supercritical wing designs for several planform configurations were investigated with wing sweep angles from 16.0 deg to 72.5 deg, depending on Mach number and wing configuration. The supercritical wing configuration showed significant improvements over the conventional configurations in drag-divergence Mach number and in drag level at transonic maneuver conditions.

Hallissy, J. B.↗

NASA NTRS1976

Optimal maneuvering and fine pointing control of large space telescope with a new magnetically suspended, single gimballed momentum storage device

This paper considers the application of an Annular Momentum Control Device (AMCD) to both fine pointing and large-angle maneuvering of a large space telescope (LST). The AMCD, which consists principally of a spinning rim suspended in noncontacting electromagnetic bearings, represents a new development in momentum storage devices. A nonlinear mathematical model of the AMCD/LST system is derived. An optimal stochastic fine-pointing controller is designed via LQG theory and the minimum-energy maneuvering problem is solved via a gradient technique. Number of state variable and control variable constraints, as well as all trigonometric nonlinearities, are considered in the latter part.

Nadkarni, A. A.↗

NASA NTRS1978

Galileo satellite tour maneuver strategies

In January of 1982 the United States will launch Galileo, the first space mission designed to perform an intensive tour of the Galilean satellites of Jupiter. This paper discusses the results of preliminary maneuver strategy studies for typical interplanetary and orbital phases of the Galileo mission. These studies include the effects of maneuver placement and various linear control algorithms on propellant consumption as determined by Monte Carlo analysis. Estimates of total propellant required for various probabilities of mission success are also given.

Miller, L. J.↗

NASA NTRS1978

Maneuvering and pointing flexible vehicles

With the development of techniques to assemble large structures in orbit, new control system problems evolve. These large structures are typically characterized by lower structural frequencies, but no compromises are made regarding maneuver and structural settling times. Techniques are discussed which will allow these large structures to be maneuvered and pointed quickly with minimum settling times.

Fosth, D. C.↗

NASA NTRS1977

The application of integral performance criteria to the analysis of discrete maneuvers in a driving simulator

The influence of vehicle transient response characteristics on driver-vehicle performance in discrete maneuvers as measured by integral performance criteria was investigated. A group of eight ordinary drivers was presented with a series of eight vehicle transfer function configurations in a driving simulator. Performance in two discrete maneuvers was analyzed by means of integral performance criteria. Results are presented.

Repa, B. S.↗

NASA NTRS1980

Shuttle program standard maneuver sequences for orbiter/upper-stage separation SSUS-A, SSUS-D, and IUS

Descriptions of standard post-ejection maneuver sequences for the deployment of IUS, SSUS-A, and SSUS-D upper stages from the space shuttle orbiter are presented. The sequences were designed to satisfy requirements for limiting the damage inflicted on the orbiter by upper-stage exhaust particles, subject to a further requirement for minimizing the impingement of orbiter thruster plumes on the deployed payload. In all cases it was assumed that the orbital maneuvering system engines would be used to apply the orbiter's major separation velocity increment.

Wilson, S. W.↗

NASA NTRS1980

Theory for computing the size and shape of a region of influence associated with a maneuvering vehicle

A general procedure for computing the region of influence of a maneuvering vehicle is described. Basic differential geometric relations, including the use of a general trajectory parameter and the introduction of auxiliary variables in the envelope theory are presented. To illustrate the application of the method, the destruct region for a maneuvering fighter firing missiles is computed.

Barger, R. L.↗

NASA NTRS1980

Optimal large angle maneuvers with simultaneous shape control/vibration arrest

A relaxation method is demonstrated which reliably solves the nonlinear two point boundary value problem which arises when optimal control theory is applied to determination of large angle maneuvers of flexible spacecraft. The basic ideas are summarized and several idealized maneuvers are determined. The emphasis is upon demonstrating the basic ideas and practical aspects of the methodology.

Turner, J. D.↗

NASA NTRS1980

Delta V errors due to attitude correction maneuvers of a spinning spacecraft

A statistical error analysis has been performed to evaluate the change in velocity of a spin stabilized spacecraft due to thruster induced attitude correction maneuvers. Analytical expressions were developed to determine the mean and variance of the velocity in terms of the nominal values and uncertainties of key spacecraft parameters. These parameters include thrust, thruster timing, thruster alignment, plume impingement force and estimated spacecraft mass. Typical values of these parameters and their uncertainties for NASA's Galileo spacecraft were used to evaluate these expressions. The results of the analysis allow the effect of attitude correction maneuvers to be evaluated with respect to the functional requirements on nongravitational acceleration. Other results include the identification of major sources of delta V error and studies of the sensitivity of delta V to variations in the error sources.

Zipursky, H. J.↗