Search NASA⌕ Search

SEARCH · Search NASA

Results for “Manipulator control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Dynamic Human-in-the-Loop Simulated Nuclear Power Plant Thermal Dispatch System Demonstration and Evaluation Study

An Idaho National Laboratory research team performed a human-in-the-loop study with two formerly licensed retired operators to evaluate thermal power dispatch operations supported by the modified GSE Systems GPWR plant simulator. Virtual representations of the analog control panels were presented on touch-screen bays configured to mimic the control room layout in the newly renovated Human Systems Simulation Laboratory. The operators performed 15 scenarios covering normal evolutions to transition the plant from full turbine operation to joint turbine and thermal power dispatch operations in addition to transient response scenarios induced with simulated faults to evaluate the impact of thermal power dispatch system on operator and plant responses. A prototype human-system interface (HSI) was developed and displayed in tandem with the virtual analog panels to support the operators executing the procedurally drive evolutions and transient responses. An interdisciplinary team of operations experts, nuclear engineers, and human factors experts observed the operators performing the scenarios to evaluate the operations. Only a preliminary analysis of the results has been performed. The full analysis will be shared in a milestone report scheduled for release at the end of September; however, some high-level conclusions were readily available. Two high level findings for the system design were captured in the study. The manual control supported by the HSI to transition from standard operations to thermal power dispatch operation imposed a considerable amount of workload on the operators due to tedious manual valve manipulations and system monitoring required to verify their intended effect. An additional operator would be required in the control room to support the daily evolution. Automatic control for the transition was deemed a requirement for plant adoption without imposing additional staffing costs. The second finding was the necessity for an automatic thermal power dispatch system trip isolation function linked to a turbine and reactor trip signal. The operators completed scenarios with automatic isolation functionality and manually required actuation of the thermal power dispatch system. The operator response was sufficiently slower in the manual trip condition, such that operators were unable to manually actuate key post trip safety functions an indicate a degraded control capability that should be avoided. With an automatic trip signal little to no impact of the thermal power dispatch system was identified on the primary plant response and therefore the system could be readily and safely adopted. Together these two findings represent the need to support the adoption of thermal power dispatch capability into existing operations by leveraging automation to augment any additional operator tasking required to control and monitor an additional system beyond existing operations.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2023

Development of a Structure for Lossless Ion Manipulations (SLIM) High Charge Capacity Array of Traps

Enhancing the sensitivity of low abundance ions in a complex mixture without sacrificing experiment throughput is highly desirable. This work demonstrates a way to greatly improve the sensitivity of ion mobility (IM) selected ions by accumulating them in an array of high-capacity ion traps located inside a novel structures for lossless ion manipulations ion mobility spectrometer (SLIM-IMS) module. The array of ion traps used in this work consisted of seven independently controllable traps. Each trap was 386 mm long and possessed a charge capacity of ~4.5×10 8 charges, with a linear range extending to ~2.5×10 8 charges. Each ion trap could be used to extract a peak (or ions over a mobility range) from an ion mobility separation based on arrival time. Ions could be stored without losses for long times (>100 s) and then released all at once or one trap at a time. It was possible to accumulate large ion populations by extracting and storing ions over repeated IM separations. We report enrichment of up to seven individual ion distributions could be performed using the seven independently controllable ion traps. Additionally, the ion trapping process effectively compressed ion populations into narrow peaks, which provides a greatly improved basis for subsequent ion manipulations. The array of high charge-capacity ion traps provides a flexible addition to SLIM and a powerful tool for IMS-MS applications requiring high sensitivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Multifunctional nanopore electrode array method for characterizing and manipulating single entities in attoliter-volume enclosures

Structurally regular nanopore arrays fabricated to contain independently controllable annular electrodes represent a new kind of architecture capable of electrochemically addressing small collections of matter—down to the single entity (molecule, particle, and biological cell) level. Furthermore, these nanopore electrode arrays (NEAs) can also be interrogated optically to achieve single entity spectroelectrochemistry. Larger entities such as nanoparticles and single bacterial cells are investigated by dark-field scattering and potential-controlled single-cell luminescence experiments, respectively, while NEA-confined molecules are probed by single molecule luminescence. By carrying out these experiments in arrays of identically constructed nanopores, massively parallel collections of single entities can be investigated simultaneously. The multilayer metal–insulator design of the NEAs enables highly efficient redox cycling experiments with large increases in analytical sensitivity for chemical sensing applications. NEAs may also be augmented with an additional orthogonally designed nanopore layer, such as a structured block copolymer, to achieve hierarchically organized multilayer structures with multiple stimulus-responsive transport control mechanisms. Finally, NEAs constructed with a transparent bottom layer permit optical access to the interior of the nanopore, which can result in the cutoff of far-field mode propagation, effectively trapping radiation in an ultrasmall volume inside the nanopore. Furthermore, the bottom metal layer may be used as both a working electrode and an optical cladding layer, thus, producing bifunctional electrochemical zero-mode waveguide architectures capable of carrying out spectroelectrochemical investigations down to the single molecule level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effects of fine-root senescence upon soil communities and nutrient flux into soil pools (Final Report)

Fine roots represent an important flux of carbon into terrestrial soils. Much of this flux occurs through the exudation of polysaccharides and other carbon compounds during the lifetime of fine-roots, but little is known about their contributions to flux as roots senesce, die and decompose. This project was designed 1) to test approaches for inducing senescence in fine roots and 2) assess the effects of the treatments on fine roots and the associated rhizosphere community. We implemented two fine-root treatments, a steam girdling approach and full severing of fine root modules from the tree, and we contrasted them with a control where roots were handled but not girdled. Fine roots and their associated community subjected to each of these three treatments were subsequently analyzed for changes in physical structure, nutrient content, community structure and gene function. Both girdling manipulations resulted in tissue disruption in fine roots and changes in the soil community relative to controls. In particular, microbial diversity for most taxa declined in girdled treatments whereas fungal diversity increased. We also observed changes in overall plant and fungal gene expression associated with treatment with plant gene expression declining over time in girdled roots with a simultaneous increase in fungal gene expression in these same treatments. Finally, in girdled fine root modules, we observed changes in gene function associated with senescence and plant stress in pine-associated genes while at the same time observing upregulation of genes associated with growth and proliferation in fungi. In conclusion, we were able to successfully girdle fine-roots in a field setting and resolve plant-level and community level changes in response to these girdling treatments.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Geometric control of emergent antiferromagnetic order in coupled artificial spin ices

Artificial spin ices (ASIs) composed of coupled nanomagnets offer the possibility to create designer geometrical frustration and manipulate inter-nanomagnet interactions. In particular, by using a dimer motif consisting of two strongly coupled single-domain nano magnets as a building block, we can control and realize intriguing antiferromagnetic physical states in which the magnetic charge is not conserved. Here we create a dimer kagome ASI system within which the antiferromagnetic order is controlled by tuning lattice geometry. Different disordered antiferromagnetic phases and the inter-nanomagnet interactions are visualized directly in demagnetized lattices with different lattice parameters. Monte Carlo simulations establish that the collective ground state consists of disordered antiferromagnetic dimers across the lattice when the intra-dimer interaction is dominant. However, for lattices governed by intra-triad-unit interactions, the ground state exhibits a longrange spin-ordered state in which the vertex magnetic charge is uniform across all triads.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Roadmap on thermodynamics and thermal metamaterials

Thermal metamaterials represent a transformative paradigm in modern physics, synergizing thermodynamic principles with metamaterial engineering to master heat flow at will. As next-generation technologies demand multi-scale thermal control, this field urgently requires systematic frameworks to unify its multidisciplinary advances. Curated through a global collaboration involving over 50 specialists across 25 subdisciplines, this review primarily summarizes two decades of advancements, ranging from theoretical breakthroughs to functional implementations. The review reveals groundbreaking innovations in heat manipulation through the exploration of both classical and non-classical transport regimes, topological thermal control mechanisms, and quantum-informed phonon engineering strategies. By bridging physical insights like non-Hermitian thermal dynamics and valleytronic phonon transport with cutting-edge applications, we demonstrate paradigm-shifting capabilities: environment-adaptive thermal cloaks, AI-optimized metamaterials, and nonlinear thermal circuits enabling heat-based computation. Experimental milestones include 3D thermal null media with reconfigurable invisibility and thermal designs breaking classical conductivity limits. Here, this collaborative effort establishes an indispensable roadmap for physicists, highlighting pathways to quantum thermal management, entropy-controlled energy systems, and topological devices. As thermal metamaterials transition from laboratory marvels to technological cornerstones, this work provides the foundational lexicon and design principles for the coming era of intelligent thermal matter.

heat conduction control↗
DOE OSTI2024

Manipulation of chiral interface states in a moiré quantum anomalous Hall insulator

Moiré systems made from stacked two-dimensional materials host correlated and topological states that can be electrically controlled with applied gate voltages. One prevalent form of topological state that can occur are Chern insulators that display a quantum anomalous Hall effect. Here we manipulate Chern domains in an interaction-driven quantum anomalous Hall insulator made from twisted monolayer–bilayer graphene and observe chiral interface states at the boundary between different domains. By tuning the carrier concentration, we stabilize neighbouring domains of opposite Chern number that then provide topological interfaces devoid of any structural boundaries. This allows the wavefunction of chiral interface states to be directly imaged using a scanning tunnelling microscope. In conclusion, our theoretical analysis confirms the chiral nature of observed interface states and allows us to determine the characteristic length scale of valley polarization reversal across neighbouring Chern domains.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Comparison of wind-farm control strategies under realistic offshore wind conditions: wake quantities of interest

Wind-farm control strategies aim to increase the efficiency, and therefore lower the levelized cost of energy, of wind farms. This is done by using turbine settings such as the yaw angle, blade pitch angles, or generator torque to manipulate the wake that negatively affects downstream turbines in the farm. Two inherently different wind-farm control methods have been identified in the literature: wake steering (WS) and active wake mixing (AWM). As one of two companion papers focused on understanding practical aspects of these two wind-farm control strategies using large-eddy simulation (LES), we below analyze the wake quantities of interest for a single wind turbine performing WS and AWM, while the companion article (Frederik et al., 2025) focuses on turbine quantities of interest including power and structural loads for the same computational setup and also includes two-turbine arrays with full and partial wake overlap. The simulations, which are based in the LES solver AMR-Wind, are tailored to have inflow conditions representative of measurements from a site off the East Coast of the US, including with strong veer and low turbulence. The turbine, which is modeled in OpenFAST and coupled to the LES, is the IEA 15 MW, an open-source offshore design. After presenting an overview of the wake recovery for the different wake-control cases, the analysis probes the fluid-dynamic causes for the different performance of the arrays reported in the companion article by examining control volumes around the wakes and the budget of the mean-flow kinetic energy (MKE) within these volumes. In the high veer environment considered, the MKE recovery is dominated by mean convection, and this is shown to especially benefit the WS strategy when a neighboring turbine is directly downstream: there is ≈65 % more available power for a downstream turbine than in the baseline case, and this power is gained primarily through mean convection on the left-tip and top-tip faces of the control volume. However, the case with imperfect knowledge of the exact wind direction favors the pulse-type AWM strategy, largely because of ≈9 % increased turbulent entrainment from aloft versus the baseline that could be related to an apparent resistance to skewing in the pulsed wake. The general reduced effectiveness of helix-type and other individual-pitch-based AWM strategies for inflow with high veer and low turbulence as reported in the companion paper is due, in part, to low magnitudes of phase-averaged turbulent entrainment. Two main findings of this study are thus that veer has a significant impact on the effectiveness of different wake-control strategies and that pulse-type AWM may be a useful strategy when the objective is power maximization in realistic, offshore flow environments with imperfect knowledge of the exact wake overlap position on the downstream turbine.

17 WIND ENERGY↗
DOE OSTI2022

Cooperative Systems in Presence of Cyber-Attacks: A Unified Framework for Resilient Control and Attack Identification

Here, this paper considers a cooperative control problem in presence of unknown attacks. The attacker aims at destabilizing the consensus dynamics by intercepting the system’s communication network and corrupting its local state feedback. We first revisit the virtual network based resilient control proposed in our previous work and provide a new interpretation and insights into its implementation. Based on these insights, a novel distributed algorithm is presented to detect and identify the compromised communication links. It is shown that it is not possible for the adversary to launch a harmful and stealthy attack by only manipulating the physical states being exchanged via the network. In addition, a new virtual network is proposed which makes it more difficult for the adversary to launch a stealthy attack even though it is also able to manipulate information being exchanged via the virtual network. A numerical example demonstrates that the proposed control framework achieves simultaneously resilient operation and real-time attack identification.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

A stochastic scan strategy for grain structure control in complex geometries using electron beam powder bed fusion

Spatial control of microstructure within a three-dimensional component has been a dream of materials scientists for centuries. However, limitations in traditional manufacturing processes prevent detailed control over the distribution of microstructures in a single part. Here, we demonstrate the ability to control grain structure and crystallographic texture during metal additive manufacturing for arbitrary cross-sections of a practical size, with profound implications for the design and optimization of next-generation products. The key to this advance is a new geometry agnostic scan path algorithm that manipulates the spatial distribution of solidification conditions. Utilizing a fundamental understanding of solidification dynamics and a model of the heat transfer during processing, we have designed this algorithm to manipulate the natural competition between epitaxial dendrite growth and grain nucleation. With this algorithm, we successfully controlled the grain structure of Ni-based superalloy IN718 in the shape of the Mona Lisa.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Identification of Defects and the Origins of Surface Noise on Hydrogen–Terminated (100) Diamond

Near-surface nitrogen vacancy centres are critical to many diamond-based quantum technologies such as information processors and nanosensors. Surface defects play an important role in the design and performance of these devices. The targeted creation of defects is central to proposed bottom-up approaches to nanofabrication of quantum diamond processors, and uncontrolled surface defects may generate noise and charge trapping which degrade shallow NV device performance. Surface preparation protocols may be able to control the production of desired defects and eliminate unwanted defects, but only if their atomic structure can first be conclusively identified. This work uses a combination of scanning tunnelling microscopy (STM) imaging and first-principles simulations to identify several surface defects on H:C(100)—2 × 1 surfaces prepared using chemical vapour deposition (CVD). The atomic structure of these defects is elucidated, from which the microscopic origins of magnetic noise and charge trapping are determined based on the modeling of their paramagnetic properties and acceptor states. Rudimentary control of these deleterious properties is demonstrated through STM tip-induced manipulation of the defect structure. Furthermore, the results validate accepted models for CVD diamond growth by identifying key adsorbates responsible for the nucleation of new layers.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Beyond Epitaxy: Ion Implantation as a Tool for Orbital Engineering

Manipulating electronic orbital states in quantum materials provides a powerful means of controlling their physical properties and technological functionality. Here, we demonstrate that orbital populations in strongly correlated oxide thin films can be continuously and reversibly tuned through postsynthesis He ion implantation. Using LaNiO 3 as a model system, we show that the orbital preference can be systematically adjusted from favoring in-plane d x 2 –y 2 occupation toward out-of-plane d z 2 states through precise control of ion fluence. Unlike conventional heteroepitaxial approaches that lock in orbital configurations during growth, this strain-doping technique enables continuous orbital tuning and the selective modification of specific film regions after device fabrication. We demonstrate the practical impact of this control by achieving a 7-fold enhancement in oxygen reduction reaction catalysis. This work establishes ion implantation as a powerful approach for orbital engineering that complements existing synthesis-based strategies while offering unique advantages for both basic research and device development.

Doping↗
DOE OSTI2019

Interfacial-Redox-Induced Tuning of Superconductivity in YBa 2 Cu 3 O 7-δ

Solid-state ionic approaches for modifying ion distributions in getter/oxide heterostructures offer exciting potentials to control material properties. Here, we report a simple, scalable approach allowing for manipulation of the superconducting transition in optimally doped YBa 2 Cu 3 O 7-δ (YBCO) films via a chemically driven ionic migration mechanism. Using a thin Gd capping layer of up to 20 nm deposited onto 100 nm thick epitaxial YBCO films, oxygen is found to leach from deep within the YBCO. Progressive reduction of the superconducting transition is observed, with complete suppression possible for a sufficiently thick Gd layer. These effects arise from the combined impact of redox-driven electron doping and modification of the YBCO microstructure due to oxygen migration and depletion. Finaly, this work demonstrates an effective step toward total ionic tuning of superconductivity in oxides, an interface-induced effect that goes well into the quasi-bulk regime, opening-up possibilities for electric field manipulation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Single-layered organic photovoltaics with double cascading charge transport pathways: 18% efficiencies

The chemical structure of donors and acceptors limit the power conversion efficiencies achievable with active layers of binary donor-acceptor mixtures. Here, using quaternary blends, double cascading energy level alignment in bulk heterojunction organic photovoltaic active layers are realized, enabling efficient carrier splitting and transport. Numerous avenues to optimize light absorption, carrier transport, and charge-transfer state energy levels are opened by the chemical constitution of the components. Record-breaking PCEs of 18.07% are achieved where, by electronic structure and morphology optimization, simultaneous improvements of the open-circuit voltage, short-circuit current and fill factor occur. The donor and acceptor chemical structures afford control over electronic structure and charge-transfer state energy levels, enabling manipulation of hole-transfer rates, carrier transport, and non-radiative recombination losses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Braiding Majorana fermions and creating quantum logic gates with vortices on a periodic pinning structure

We show how vortices that support Majorana fermions when placed on a periodic pinning array can be used for vortex exchange and independent braiding by performing a series of specific moves with a probe tip. Using these braiding operations, we demonstrate realizations of a Hadamard and a CNOT gate. We specifically consider the first matching field at which there is one vortex per pinning site, and we show that there are two basic dynamic operations, move and exchange, from which basic braiding operations can be constructed in order to create specific logic gates. The periodic pinning array permits both control of the world lines of the vortices and freedom for vortex manipulation using a set of specific moves of the probe during which the probe tip strength and height remain unchanged. We measure the robustness of the different moves against thermal effects and show that the three different operations produce distinct force signatures on the moving tip.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Dynamically patterning x-ray beam by a femtosecond optical laser

Modern science and technology have greatly benefitted from our ability to precisely manipulate light waves, in both their spatial and temporal degrees of freedom. In the x-ray region, however, spatial control has been virtually static mainly due to stringent requirements for realizing high-performance optical elements. The lack of dynamic spatial control of x-ray beam has prevented researchers from realizing more sophisticated use of the wave field, which has rapidly advanced in the optical region in the past decades. In this study, we propose a practical scheme to dynamically control local x-ray reflectivity of a perfect silicon crystal by a femtosecond optical laser and demonstrate a programmable spatial x-ray modulator. Our modulator aims for spatial manipulation of the x-ray amplitude and is shown to produce arbitrary grayscale patterns with spatial frequencies up to 25 per millimeter. The proposed modulation scheme opens up a platform to enable advanced x-ray sensing and imaging techniques that can fully harness the wave nature of x-rays.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Electrochemical Manipulation and Radiolytic Evaluation of Organic Phase Neptunium

Presentation for Seed LDRD proposal presentation: This Seed LDRD research proposes to test an innovative approach to precisely control the oxidation state distribution of neptunium (Np) under used nuclear fuel (UNF) reprocessing conditions using novel electrochemical methods. Current UNF reprocessing technologies are not financially viable in the US, requiring significant scientific and technological innovation to improve cost efficiency. Reducing the number of process cycles is one avenue for increasing cost efficiency, of which resolving the challenge associated with isolating Np is critical. Under envisioned process conditions, Np is present in a mixture of extractable (Np(IV) and Np(VI)) and inextractable (Np(V)) oxidation states, the distribution of which is dependent on several factors, including ionizing radiation dose, that change throughout a reprocessing scheme. Consequently, Np unintentionally partitions into various UNF reprocessing phases and product streams, ultimately increasing the number of process cycles to isolate UNF components. Here, we propose to employ novel, high surface area, optically transparent, Ligand Modified tin-doped indium oxide Electrodes (LMES). These LMEs bind Np, and therefore enable concurrent generation and spectroscopic characterization of Np oxidation states in organic solutions. These proof-of-concept experiments will: (i) facilitate optimization of the proposed electrochemical system conditions for Np oxidation state manipulation; (ii) identify the accessible electrochemical window for Np complexes in the organic phase; (iii) report characteristic optical spectra for each accessible complexed Np oxidation state; and (iv) determine the lifetime and partitioning of a given atypical Np oxidation state in the organic phase in the presence and absence of ionizing radiation fields. The data gathered by this Seed LDRD will provide support for the design of an electrochemical process concept for the precise manipulation of Np oxidation states in UNF reprocessing solvent systems, with the intention of providing advanced control over Np mass transfer, and thus greater process efficiency and economy.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗