Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mechanical Loading”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Evaluating Daily Load Stimulus Formulas in Relating Bone Response to Exercise

Six formulas representing what is commonly referred to as "daily load stimulus" are identified, compared and tested in their ability to relate skeletal mechanical loading to bone maintenance and osteogenic response. Particular emphasis is placed on exercise- induced skeletal loading and whether or not the formulas can adequately capture the known experimental observations of saturation of continuous cyclic loading, rest insertion between repetitions (cycles), recovery of osteogenic potential following saturation, and multiple shorter bouts versus a single long bout of exercise. To evaluate the ability of the formulas to capture these characteristics, a set of exercise scenarios with type of exercise bout, specific duration, number of repetitions, and rest insertion between repetitions is defined. The daily load values obtained from the formulas for the loading conditions of the set of scenarios is illustrated. Not all of the formulas form estimates of daily load in units of stress or in terms of strain at a skeletal site due to the loading force from a specific exercise prescription. The comparative results show that none of the formulas are able to capture all of the experimentally observed characteristics of cyclic loading. However, the enhanced formula presented by Genc et al. does capture several characteristics of cyclic loading that the others do not, namely recovery of osteogenic potential and saturation. This could be a basis for further development of mathematical formulas that more adequately approximates the amount of daily stress at a skeletal site that contributes to bone adaptation.

Pennline, James A.↗

Advanced Environmental Barrier Coating and SA Tyrannohex SiC Composites Integration for Improved Thermomechanical and Environmental Durability

The development of 2700 degF capable environmental barrier coating (EBC) systems, particularly, the Rare Earth "Hafnium" Silicon bond coat systems, have significantly improved the temperature capability and environmental stability of SiC/SiC Ceramic Matrix Composite Systems. We have specifically developed the advanced 2700 degF EBC systems, integrating the EBC to the high temperature SA Tyrannohex SiC fiber composites, for comprehensive performance and durability evaluations for potential turbine engine airfoil component applications. The fundamental mechanical properties, environmental stability and thermal gradient cyclic durability performance of the EBC - SA Tyrannohex composites were investigated. The paper will particularly emphasize the high pressure combustion rig recession, cyclic thermal stress resistance and thermomechanical low cycle fatigue testing of uncoated and environmental barrier coated Tyrannohex SiC SA composites in these simulated turbine engine combustion water vapor, thermal gradients, and mechanical loading conditions. We have also investigated high heat flux and flexural fatigue degradation mechanisms, determined the upper limits of operating temperature conditions for the coated SA composite material systems in thermomechanical fatigue conditions. Recent progress has also been made by using the self-healing rare earth-silicon based EBCs, thus enhancing the SA composite hexagonal fiber columns bonding for improved thermomechanical and environmental durability in turbine engine operation environments. More advanced EBC- composite systems based on the new EBC-Fiber Interphases will also be discussed.

Tyrannohex SiC Ceramics↗

Neural Mechanisms to the Space Environment

Highly conserved neural systems have evolved to sense the inertial forces due to head translation and head tilt relative to gravitational vertical. These structures consist of ciliated mechanosensitive receptor cells inserted into a neuroepithelium surmounted by biomineral grains of calcium carbonate (CaCO3) called oto- (vertebrates) or stato-conia (invertebrates). Detection of these forces by receptor cells relies on the CaCO3 mass being weighted in Earths 1G. A change in gravity or orientation with respect to gravity has a profound effect on how an organism interacts with its environment, and it is evident that the nervous system responds to the new gravity state. This response might involve the peripheral receptors, the CaCO3 mass, the brain or any combination of these mechanisms based on the intensity and duration of the gravity change. Here, we examine the arguments supporting the different mechanisms of adaptation to the space environment. First, a pre- or post-synaptic alteration in the strength of synaptic transmission between the receptor cell and nerve afferent can adjust the system output. The number of synaptic ribbons in certain type II hair cells in rodent is labile, increasing following exposure to microgravity. An increase in number of synaptic ribbons in toadfish otolith hair cells following exposure to microgravity could potentially explain the observed afferent hypersensitivity to acceleration postflight. The physiological findings in the isolated statocyst in snails are in line with the vertebrate data, and conform to the proposition that G exposure leads to changes in gravireceptor function. At the same time this similarity in neural response to G exposure between the vertebrates and invertebrates is intriguing: the increased neural sensitivity in the vertebrate was detected in the nerve afferents, one synapse away from the receptor cell, whereas the increased neural sensitivity observed in the snail was detected directly at the receptor level. Second, the CaCO3 mass provides mechanical loading of receptor cell cilia, and their density alters sensitivity. A widely considered mechanism by which the animal responds to a chronic change in amplitude of gravity is a change in weight-lending CaCO3 mass. In G, it is argued, the organism counters the loss of gravity by increasing CaCO3 production, thereby increasing its mass, as a means to increase system gain. In hypergravity, the converse is argued. Earlier evidence in mollusks and recent results in mice suggest a remodeling might occur, especially after long-term space exposure. Lastly, we have to distinguish at least two kinds of neural feedbacks. One is connected with local mechanisms of self-regulation and specific for initial period of organ development when the neural connections are still absent. And the other feedback is related to neural self-regulation and specific for later stages of the organ development, and includes an efferent vestibular feedback. Complexity of the problem is enhanced by incompleteness of experiments, and consequently the experimental results have not led to a clear interpretation despite the numerous studies.

Boyle, Richard D.↗

Coherent Synchrotron-Based Micro-Imaging Employed for Studies of Micro-Gap Formation in Dental Implants

Biocompatible materials such as titanium are regularly applied in oral surgery. Titanium-based implants for the replacement of missing teeth demand a high mechanical precision in order to minimize micro-bacterial leakage, especially when two-piece concepts are used. Synchrotron-based hard x-ray radiography, unlike conventional laboratory radiography, allows high spatial resolution in combination with high contrast even when micro-sized features in such highly attenuating objects are visualized. Therefore, micro-gap formation at interfaces in two-piece dental implants with the sample under different mechanical loads can be studied. We show the existence of micro-gaps in implants with conical connections and study the mechanical behavior of the mating zone of conical implants during loading. The micro-gap is a potential source of implant failure, i.e., bacterial leakage, which can be a stimulus for an inflammatory process.

60 APPLIED LIFE SCIENCES↗

Mechanotransductive Regulation of Gap-Junction Activity Between MLO-Y4 Osteocyte-Like and MC3T3-E1 Osteoblast-Like Cells in Three-Dimensional Co-Culture.

Cell and animal studies conducted onboard the International Space Station and formerly on Shuttle flights have provided groundbreaking data illuminating the deleterious biological response of bone to mechanical unloading. However the intercellular communicative mechanisms associated with the regulation of bone synthesis and bone resorption cells are still largely unknown. Connexin-43 (CX43), a gap junction protein, is hypothesized to play a significant role in osteoblast and osteocyte signaling. The purpose of this investigation was to evaluate within a novel three-dimensional microenvironment how the osteocyte-osteoblast gap-junction expression changes when cultures are exposed to exaggerated mechanical load. MLO-Y4 osteocyte-like cells were cultured on a 3D-Biotek polystyrene insert and placed in direct contact with an MC3T3-E1 pre-osteoblast co-cultured monolayer and exposed to 48 h of mechanical stimulation (pulsatile fluid flow (PFF) or monolayer cyclic stretch (MCS)) then evaluated for viability, proliferation, metabolism, and CX43 expression. Mono-cultured MLO-Y4 and MC3T3-E1 control experiments were conducted under PFF and MCS stimulation to observe how strain application stimuli (PFF cell membrane shear or MCS cell focal adhesion/attachment loading) initiates different signaling pathways or downstream regulatory controls. TotalLive cell count, viability and metabolic reduction (Trypan Blue, LIVEDead and Alamar Blue analysis respectively) indicate that mechanical activation of MC3T3-E1 cells inhibits proliferation while maintaining an average 1.04E4 reductioncell metabolic rate, *p0.05 n4. MLO-Y4s in monolayer culture increase in number when exposed to MCS loading but the percent of live cells within the population is low (46.3 total count, *p0.05 n4), these results may indicate an apoptotic signaling cascade. PFF stimulation of the three-dimensional co-cultures elicits a universal increase in CX43 in MLO-Y4 and MC3T3-E1 cells, illustrated by immunohistological observation. Increased CX43 expression is also observed with the three-dimensional co-cultures with MC3T3-E1 MCS stimulation but the increased gap-junction protein presence was limited to the osteoblast-osteocyte interface region. Previously reported PCR evaluation of osteogenic markers further corroborate that the co-cultured populations communicative networks play a role in translating mechanical signals to molecular messaging. These findings suggests an osteocyte-osteoblast gap-junction signaling feedback mechanism may regulate mechanotransduction of apoptosis initiation and transcription of cytokine signaling proteins responsible for stem cell niche recruitment much more directly than previously believed.

mechanical loading↗

Probing the Mechanical Performance of Micro-architected Porous Structures Through In Situ Characterization and Analysis

Micropores play critical roles in both natural and man-made materials. Such pores take on a variety of shapes and sizes ranging from spherical to irregular sphere-like voids with diameters spanning from the nanometer to millimeter scales. When porous structures are mechanically loaded, the pores direct the stress around their free surfaces, altering the material’s mechanical response relative to fully dense materials. In this study, for the first time, we create micro-architected porous samples using nanolithography and investigate the role of pore morphology by conducting a series of in situ micropillar compression tests in scanning electron microscopy. The findings demonstrate that porosity is the primary factor influencing the mechanical response of these micro-architected materials, as often seen on a macroscopic level. Additionally, we observed that pore geometry had a significant impact on Young’s modulus, yield stress, and strain energy density as a secondary parameter. Then, the extracted Young’s modulus was compared to macroscopic empirical models and determined the analytical models sufficiently described the impact of porosity in the microscopic scale but failed to capture the impact of second-order parameters. Furthermore, these results suggest how porous materials can be tailored to achieve desired mechanical properties based on the engineering applications of interest.

36 MATERIALS SCIENCE↗

Multifunctional structural lithium-ion battery for electric vehicles

An innovative concept for a multifunctional structural battery using lithium-ion battery materials as load bearing elements in a sandwich panel construction has been demonstrated. The structural battery prototype has exhibited an initial capacity of 17.85 Ah, an energy density of 248 Wh L −1 , a specific energy of 102 Wh kg −1 , and a capacity retention of 85.8% after 190 charge–discharge cycles at ~ C/3 rate and eight mechanical loading cycles (upto 1060 N). The mechanical stiffness in three-point bend tests follows expectations based on sandwich beam theory, proving that the battery materials are sharing in the load-carrying function of the sandwich panel. While areas for improvement of the fabrication and performance of the prototype still exist, the results of the current investigation demonstrate the promising potential of the proposed structural battery concept for the efficient use of space and mass in an electric vehicle.

Zhang, Yancheng↗

Hypergravity Loading the Cultured Osteoblasts: Modeling and Experimental Analysis of Cellular Morphology and the Cytoskeleton

Bone forming cells, osteoblasts, respond to various mechanical forces, including mechanical strain and fluid-induced shear stress. This study examined whether osteoblasts detect changes in gravity as a mechanical force, as assessed by cellular morphology and dimensions of the cytoskeletal network. We used modeling to evaluate how gravity influences cell morphology given theoretical differences in densities between the surrounding medium, cytoplasm, and nucleus. A mechanical model was built based on analysis of axisymmetric shell structures (Fast4 software) to study the effects of 10 times gravity (10G) on cell height. The model indicated 0.02% decrease in overall cell height when the medium was 10% denser than the nucleus or cytoplasm, 5.9 x 10(exp-5)% decrease when the nucleus was 10% denser than the cytoplasm or medium, and 1.3 x 10(exp-5)% decrease when the cell cytoplasm was 10% denser than the nucleus or medium. To experimentally evaluate the influence of gravity, cultured primary fetal rat osteoblasts were grown to near confluence and centrifuged at 10G for 3 hours. Actin, microtubules, and nuclei were fluorescently labeled and analyzed by confocal microscopy to determine overall microtubule and actin network height. Centrifugation led to an apparent reduction in height of both the microtubule (-16%) and the actin (-20%) networks relative to stationary controls. Thus, both modeling and experiments indicate that hypergravity reduces the height of the osteoblast cell layer and their microtubule and actin networks. This combination of modeling and experimental analyses will help us to better understand the mechanical loading of osteoblasts.

Searby, N. D.↗

Room Temperature Quasi-static Characterization and Constitutive Model Parametrization of Flexible Polyurethane Foams of Different Densities Loaded in Different Orientations

This report describes the efforts to characterize and model General Plastics TF6070 and EF4000 flexible polyurethane foams under room temperature, large deformation quasi-static cyclic mechanical loading conditions. Densities from three to fifteen pound per cubic foot (PCF) are examined, which correspond to relative densities of approximately 4 to 20%. These foams are open cell structured and flexible at room temperature with a glass transition transition less than -30°C, and they fully recover their original shape when unloaded (at room temperature). Uniaxial compression tests were conducted with accompanying lateral image series for Digital Image Correlation (DIC) analysis with the goal of extracting transverse strain responses. Due to difficulties with DIC analysis at large strains, lateral strains were instead extracted for each test via edge tracking. The experimental results exhibit a nonlinear elastic response and anisotropic material behavior (particularly for the lower densities). Some hysteresis is observed that is different between the first and subsequent cycles of deformation indicating both a small degree of permanent damage (reduced stiffness during reloading) and viscoelasticity. These inelastic mechanisms are not considered in the modeling and calibration in this report. This work considers only the rate independent, room temperature foam behavior. Individual foam densities were calibrated for loading in two directions, parallel and perpendicular to the foam bubble rise direction, since the mechanical behavior is different in these two directions. The Flex Foam constitutive model was used for all parameterizations despite the fact that the model is isotropic. A review of the constitutive model is given as well as necessary data reduction procedures to parameterize it for each foam density and orientation are discussed. Finally, two different parameterizations are developed that take the undeformed foam density as an input that span all densities considered. These two parameterized models represent foams loaded in the rise and transverse directions respectively. We summarize the assumptions and limitations of the parameterizations provided in this report to guide analysis choices with them. All parameterizations presented herein have the following traits, room temperature, rate independent, damage-free, and non-dissipative . Isotropy (even if they are representing anisotropic data). Supplied Sierra Solid Mechanics Flex Foam Model Inputs are in units: pounds, inches, Celsius, and seconds

36 MATERIALS SCIENCE↗

Prediction of crack propagation paths in the unit cell of SOFC stacks

Planar Solid Oxide Fuel Cells (SOFC) stacks are multi-material layered systems with different thermo-mechanical properties. Due to their severe thermal loading, these layers have to meet high demands to preserve their mechanical integrity without initiation and propagation of fracture. Here, we focus on a typical unit cell of the stack which consists of positive electrode-electrolyte-negative electrode (PEN). Based on the mechanical properties of each layer and their interfaces, an energy criterion as a function of crack length is used for the prediction of possible crack extensions in the PEN. This criterion is a pure local criterion, independent of applied loads and geometry of the specimen. An analysis of the competition between crack deflections in the interfaces and crack penetration in layers is presented.

30 DIRECT ENERGY CONVERSION↗

Finite Element Model Characterization Of Nano-Composite Thermal And Environmental Barrier Coatings

Thermal and environmental barrier coatings have been applied for protecting Si based ceramic matrix composite components from high temperature environment in advanced gas turbine engines. It has been found that the delamination and lifetime of T/EBC systems generally depend on the initiation and propagation of surface cracks induced by the axial mechanical load in addition to severe thermal loads. In order to prevent T/EBC systems from surface cracking and subsequent delamination due to mechanical and thermal stresses, T/EBC systems reinforced with nano-composite architectures have showed promise to improve mechanical properties and provide a potential crack shielding mechanism such as crack bridging. In this study, a finite element model (FEM) was established to understand the potential beneficial effects of nano-composites systems such as SiC nanotube-reinforced oxide T/EBC systems.

Yamada, Yoshiki↗

Fast Acting Eddy Current Driven Valve for Massive Gas Injection on ITER

Tokamak plasma disruptions present a significant challenge to ITER as they can result in intense heat flux, large forces from halo and eddy currents, and potential first-wall damage from the generation of multi-MeV runaway electrons. Massive gas injection (MGI) of high Z material using fast acting valves is being explored on existing tokamaks and is planned for ITER as a method to evenly distribute the thermal load of the plasma to prevent melting, control the rate of the current decay to minimize mechanical loads, and to suppress the generation of runaway electrons. A fast acting valve and accompanying power supply have been designed and first test articles produced to meet the requirements for a disruption mitigation system on ITER. The test valve incorporates a flyer plate actuator similar to designs deployed on TEXTOR, ASDEX upgrade, and JET [1 3] of a size useful for ITER with special considerations to mitigate the high mechanical forces developed during actuation due to high background magnetic fields. The valve includes a tip design and all-metal valve stem sealing for compatibility with tritium and high neutron and gamma fluxes.

Fast Acting Eddy current↗

Rapid activation of non-oriented mechanophores via shock loading and spallation

Mechanophores (MPs), stimuli-responsive molecules that respond chromatically to mechanochemical reactions, are important for understanding the coupling between mechanics and chemistry as well as in engineering applications. However, the atomic-level understanding of their activation originates from gas phase studies or under simple linear elongation forces directly on molecules or polymer chains containing MPs. The effect of many-body distortions, pervasive in condensed-phase applications, is not understood. Therefore, we performed large-scale molecular dynamics (MD) simulations of a poly(methyl methacrylate)-spiropyran copolymer under dynamic mechanical loading and studied the activation of the MP under various conditions from dynamical compression to tension during unloading. Detailed analysis of the all-atom MD trajectories shows that the MP blocks experience significant many-body intramolecular distortion that can significantly decrease the activation barrier as compared with when deformation rates are slow relative to molecular relaxation time scales. Here we find that the reactivity of MPs under material compression states is governed by many-body effects of intramolecular torsions, whereas under tension, the reactions are governed by tensile stresses.

36 MATERIALS SCIENCE↗

High-precision Method for Cyclic Loading of Small-Animal Vertebrae to Assess Bone Quality

One potentially important bone quality characteristic is the response of bone to cyclic (repetitive) mechanical loading. In small animals, such as in rats and mice, cyclic loading experiments are particularly challenging to perform in a precise manner due to the small size of the bones and difficult-to-eliminate machine compliance. Addressing this issue, we developed a precise method for ex vivo cyclic compressive loading of isolated mouse vertebral bodies. The method has three key characteristics: 3D-printed support jigs for machining plano-parallel surfaces of the tiny vertebrae; pivotable loading platens to ensure uniform contact and loading of specimen surfaces; and specimen-specific micro-CT-based finite element analysis to measure stiffness to prescribe force levels that produce the same specified level of strain for all test specimens. To demonstrate utility, we measured fatigue life for three groups (n = 5-6 per group) of L5 vertebrae of C57BL/6J male mice, comparing our new method against two methods commonly used in the literature. We found reduced scatter of the mechanical behavior for this new method compared to the literature methods. In particular, for a controlled level of strain, the standard deviation of the measured fatigue life was up to 5-fold lower for the new method (F-ratio = 4.9; p < 0.01). The improved precision for this new method for biomechanical testing of small-animal vertebrae may help elucidate aspects of bone quality.

Bone quality↗

Self-aligned concentrating immersion-lens arrays for patterning and efficiency recovery in scaffold-reinforced perovskite solar cells

In contrast to existing silicon, CIGS, and multi-junction cells that exhibit remarkable mechanical durability, perovskite solar cells have been shown to delaminate when subjected to the mechanical loads that occur during processing and field exposures, limiting their potential as a reliable solar technology. Mechanical reinforcement is thus essential for durable and reliable perovskite technologies. One current strategy to overcome the thermomechanical fragility of perovskite solar cells is to extrinsically shield them by introducing reinforcing scaffolds which partition the cell into many distinct microcells, but improvements in mechanical stability coincide with a reduced device efficiency due to parasitic absorption by the scaffold. We address this reduced efficiency by integrating concentrating immersion-lens arrays (CILAs) into scaffold-reinforced solar cells. These scaffolds are lithographically patterned by a maskless process, in which ultraviolet light is used to pattern the scaffolds through the CILAs, ensuring self-alignment and optical contact with the microcells. Perovskite devices are deposited into the microcells, and during operation, light is concentrated into the microcells and away from the insulating scaffolds, resulting in mechanically resilient solar cells with efficiencies comparable to planar devices. The CILAs also exhibit passive tracking of incident light—verified experimentally and with ray-tracing simulations—which is critical for optimal power output as the sun moves across the sky during the day. The simplicity of the fabrication process and the efficiency of the resulting scaffolded devices show that a lens-integrated scaffold-reinforced structure is a potential pathway to high-performance, robust, commercially viable perovskite solar cells.

14 SOLAR ENERGY↗

On the implementation of dislocation reactions in continuum dislocation dynamics modeling of mesoscale plasticity

The continuum dislocation dynamics framework for mesoscale plasticity is intended to capture the dislocation density evolution and the deformation of crystals when subjected to mechanical loading. It does so by solving a set of transport equations for dislocations concurrently with crystal mechanics equations, with the latter being cast in the form of an eigenstrain problem. Incorporating dislocation reactions in the dislocation transport equations is essential for making such continuum dislocation dynamics predictive. A formulation is proposed to incorporate dislocation reactions in the transport equations of the vector density-based continuum dislocation dynamics. This formulation aims to rigorously enforce dislocation line continuity using the concept of virtual dislocations that close all dislocation loops involved in cross slip, annihilation, and glissile and sessile junction reactions. The addition of virtual dislocations enables us to accurately enforce the divergence free condition upon the numerical solution of the dislocation transport equations for all slip systems individually. A set of tests were performed to illustrate the accuracy of the formulation and the solution of the transport equations within the vector density-based continuum dislocation dynamics. Comparing the results from these tests with an earlier approach in which the divergence free constraint was enforced on the total dislocation density tensor or the sum of two densities when only cross slip is considered shows that the new approach yields highly accurate results. Bulk simulations were performed for a face centered cubic crystal based on the new formulation and the results were compared with discrete dislocation dynamics predictions of the same. The microstructural features obtained from continuum dislocation dynamics were also analyzed with reference to relevant experimental observations.

36 MATERIALS SCIENCE↗

Functional Responses in Otolith Structures from Micro- to Hyper-Gravity

Vertebrates and invertebrates sense gravito-inertial acceleration by mechanoreceptors in the otolith and statolith organs, respectively. These structures consist of ciliated sensory hair cells surmounted by biomineral grains of calcium carbonate (CaCO3) called oto-orstato-conia. The grains provide mechanical loading of hair cell cilia, and their high density increases sensitivity to acceleration. A widely considered mechanism by which the animal responds to a chronic change in amplitude of gravity is a change in weight lending otoconia. In G, it is argued, the organism counters the loss of gravity by increasing CaCO3 production, thereby increasing otolith mass, as a means to increase system gain. In hypergravity (HG), the converse is argued. Here, we present the results obtained in 3 species exposed both to G and HG. Adult toadfish, Opsanus tau, were exposed to G in 2 short-duration shuttle missions and to 1.24 1.73G centrifugation for 1-32 days; re-adaptation was studied following 1-8 days of 1G. Results show a biphasic pattern in response to 1.73G: initial hypersensitivity, similar to that observed after G exposure, followed by transition to a significant decrease at 16-32 days. Recovery from HG exposure is 4-8 days. Next, we examined directly the responses of statocyst receptors in the land snail after exposure to G on two unmanned Russian Orbital missions and at 1.24G. Similar to vertebrate afferents snail receptors increased their sensitivity to tilt after G exposure, and decrease it after 16-32 days of HG. Two major pieces of information are still needed: vertebrate hair cell response to altered gravity and impact of longer duration exposures on sensory plasticity. To address the latter, we applied electron microscopic techniques to image otoconia mass obtained from 1) mice subjected to 91-days of weightlessness in the Mouse Drawer System (MDS) flown on International Space Station, 2) mice subjected to 91-days of 1.24G centrifugation on ground, and 3) mice flown on 2 short-duration orbital missions. Images indicate a clear restructuring of individual otoconia, suggesting deposition to the outer shell. Images from their HG counterparts indicate the converse - an ablation of the otoconia mass. For shorter duration exposures to weightlessness on 13-day shuttle missions, mice otoconia appear normal. Despite the permanence of 1G in evolution, the animal senses exposure to a novel, non-1G, environment and adaptive mechanisms are initiated - in the short term, compensation is likely confined to the peripheral sensory receptors, the brain or both. For longer exposures structural modifications of the endorgan may also result. Support Contributed By: NASA 03-OBPR-04 and 11-11_Omni_2-0002

Vertebrates↗