Search NASA⌕ Search

SEARCH · Search NASA

Results for “Metal oxides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Real-time Measurements of Complex Transition Metal Oxide Nanostructure Growth (Year 3 - Final Technical Report-GaTech-MIT)

The project, a collaboration between the Ross Lab at MIT and the Filler Lab at Georgia Tech, aimed to combine in situ microscopy and spectroscopy measurements to answer fundamental questions about the physics and chemistry governing the bottom-up vapor-solid-liquid (VLS) growth of one-dimensional (1-D) functional oxides. This work supported one PhD student and 1 postdoc. One paper has been published and 5 others are in preparation. To date, this work has been presented at 5 conferences.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Transition Metal Oxide Powders Made from Flame Spray Pyrolysis for Li-Ion Batteries

In 2012 the U.S. Department of Energy introduced its EV Everywhere Grand Challenge, with a stated goal of enabling “plug-in electric vehicles (PEVs) that are as affordable and convenient for the American family as gasoline-powered vehicles by 2022.” This requires a reduction in battery costs from the current $500/kWh to around $125/kWh. Most approaches have been to eliminate vehicle weight through lightweighting and to improve the energy density of battery materials. But what if we were able to just make the materials cheaper instead? To this end we introduce a green, low-cost method of producing cathode materials using an integrated flame spray pyrolysis process.

25 ENERGY STORAGE↗
DOE OSTI2023

Near Infrared Plasmonic Properties in Spinel Metal Oxide Nanocrystals [Poster]

Spinel iron oxide nanocrystals are shown to support NIR LSPR. LSPR is dependent on size and Fe 2+ : Fe 3+ ratio and can be tuned to cover telecommunications region via various synthetic controls. Coupling IR emitting QDs with Fe 3 O 4 nanocrystals exhibiting overlapping plasmonic behavior resulted in faster emission. Plasmonic nanocavity optimizes the Purcell effect. Future work aims to integrate Fe 3 O 4 nanocubes into nanogap antenna construction.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Chloride-Based Volatility for Waste Reduction and/or Reuse of Metallic-, Oxide- and Salt-Based Reactor Fuels

The objective of the chloride based volatility project (CBV) was to demonstrate the ability to separate uranium from used fuel to enable process improvements resulting in 10x reduction of waste volume, while maintaining safeguards standards and global backend costs at $\$$1/MW-hr. Current industrial practices perform separations of used fuel using solvent media in the form of aqueous and molten salt processes, resulting in contaminated process waste. The CBV approach utilized solid state chemistry with no solvent media and was successful in chlorinating uranium and fission product oxides that sublimed into the gas phase and were collected in targeted condensation zones based on temperature gradients of chlorinated products. Recovery of better than 95% of initial uranium in the form of UCl4 was demonstrated when simulated used nuclear fuel was used. Laser induced breakdown spectroscopy, LIBS, and ultraviolet-visible spectroscopy, UV-Vis, were combined into a high temperature flow cell design and utilized as process monitoring techniques to observed chlorinated products leave the reaction vessel in real time.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Atomic Layer Deposition (ALD) of Metal and Metal Oxide Films: A Surface Science Study (Final Report)

This is the final report for this project. The long-term objective of our project is to develop a general molecular-level picture of the surface chemistry associated with ALD processes. Our central hypothesis is that the chemistry of ALD precursors can differ significantly from that seen in solution. Awareness of such differences should provide general guidelines on what to watch for when synthesizing new ALD precursors and designing and optimizing new ALD processes, especially in terms of minimizing the incorporation of impurities in the growing films and of carrying out depositions under mild pressure and temperature conditions. The main objective of our research project has been to advance the fundamental knowledge of the surface chemistry of ALD precursors needed for the design and optimization of film deposition processes. A modern surface-science approach has been implemented to both elucidate the mechanism of the reactions of the precursors on the surface and characterize the composition and morphology of the growing films.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A Thermogravimetric Temperature-Programmed Thermal Redox Protocol for Rapid Screening of Metal Oxides for Solar Thermochemical Hydrogen Production

As combinatorial and computational methods accelerate the identification of potentially suitable thermochemically-active oxides for use in solar thermochemical hydrogen production (STCH), the onus shifts to quickly evaluating predicted performance. Traditionally, this has required an experimental setup capable of directly carrying out a two-stage thermochemical water-splitting process. But this can be a difficult endeavor, as most off-the-shelf equipment cannot adequately deal simultaneously with the high temperatures, varying oxygen partial pressures, and high H 2 O partial pressures required; achieving sufficient temporal sensitivity to accurately quantify the kinetics is also a major challenge. However, as proposed here, a less complicated experiment can be used as a first screening for thermochemical water splitting potential. Temperature-Programmed Thermal Redox (TPTR) using thermogravimetry evaluates the thermal reduction behavior of materials. This technique does not require water splitting or CO 2 -splitting analogs but can nonetheless predict water-splitting performance. Three figures of merit are obtained from the TPTR experiment: reduction onset temperature, extent of reduction, and extent of recovery upon reoxidation. These metrics can collectively be used to determine if a material is capable of thermochemical water-splitting, and, to good approximation, predict whether the thermodynamics are favorable for use under more challenging high-conversion conditions. This paper discusses the pros and cons of using TPTR and proposes a protocol for use within the STCH community.

08 HYDROGEN↗
DOE OSTI2025

Ab Initio Molecular Dynamics Insights into Stress Corrosion Cracking and Dissolution of Metal Oxides

Oxide phases such as α-Fe2O3 (hematite) and α-Al2O3 (corundum) are highly insoluble in water; however, subcritical crack growth has been observed in humidity nonetheless. Chemically induced bond breaking at the crack tip appears unlikely due to sterically hindered molecular transport. The molecular mechanics of a crack in corundum with a reactive force field reveal minimal lattice trapping, leading to bond breaking before sufficient space opens for water transport. To address this, we model a pre-built blunt crack with space for H2O molecule adsorption at the tip and show that it reduces fracture toughness by lowering the critical J-integral. Then, we explore stress-enhanced dissolution to understand the mechanism of crack tip blunting in the oxide/water system. Density functional theory combined with metadynamics was employed to describe atomic dissolution from flat hematite and corundum surfaces in pure water. Strain accelerates dissolution, stabilizing intermediate states with broken bonds before full atom detachment, while the free energy profile of unstrained surfaces is almost monotonic. The atomistic calculations provided input for a kinetic model, predicting the shape evolution of a blunt crack tip, which displays three distinct regimes: (i) dissolution primarily away from the tip, (ii) enhanced blunting near but not at the apex, and (iii) sharpening near the apex. The transition between regimes occurs at a low strain, highlighting the critical role of water in the subcritical crack growth of oxide scales, with dissolution as the fundamental microscopic mechanism behind this process.

Chemistry↗
DOE OSTI2020

Mixed metal oxide extrudate catalyst

Methods of making a Ce0.6Zr0.4O2 supported NiMg catalyst extrudate are provided. In some aspects, the methods include preparing a ceria-zirconia solution comprising Ce(NO3)3.6H2O, ZrO(NO3)2xH2O, and water; forming a precipitate; drying and calcining the precipitate to produce a Ce0.6Zr0.4O2; adding a nickel-magnesium solution to the Ce0.6Zr0.4O2 to produce the NiMg/Ce0.6Zr0.4O2; and drying and calcining a wet extrudate of the NiMg/Ce0.6Zr0.4O2 to produce the Ce0.6Zr0.4O2 supported NiMg catalyst extrudate. Ce0.6Zr0.4O2 supported NiMg catalyst extrudates made by the methods are also provided.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Graphene-coated metal oxide spinel cathodes

Disclosed herein are graphene-coated lithium manganese oxide spinels cathodes for high-performance batteries Li-ion batteries and methods for making thereof. A single-layer graphene coating is shown to significantly reduce manganese loss in the cathodes while concurrently promoting the formation of a well-defined solid electrolyte interphase layer.

25 ENERGY STORAGE↗