SEARCH · Search NASA

Results for “Multispectral”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

All sources NASA NTRS DOE OSTI

NASA NTRS1977

A multispectral analysis of the interface between the Brazil and Falkland currents from Skylab

Skylab multispectral scanner data acquired on September 2, 1973, were used to study the spectral signature of the water at the confluence of the Falkland and the Brazil currents off the east coast of Argentina. The boundary between the two currents is sharply defined in the thermal band (10.2-12.5 microns); a gradient of 1 C per 67 m exists locally at the boundary. Using the visible bands centered at 0.485 and 0.54 micron, this study establishes that water color analysis of boundary waters must first confirm that the sea states on both sides of the boundary do not contaminate the data with sun glitter.

Johnson, W. R.↗

NASA NTRS1978

Direct evaluation of aerosol-mass loadings from multispectral extinction data

A formula is derived for the evaluation of the total volume of aerosol in a column, and hence for the aerosol columnar mass loading, from multispectral extinction data. This formula is exact in the 'anomalous diffraction' approximation, and reasonably accurate for Mie scattering, over a fairly wide range of refractive indices typical of real aerosols.

Box, M. A.↗

NASA NTRS1979

Application of multispectral color photography to flame flow visualization

For flames of short duration and low intensity of radiation a spectroscopical flame diagnostics is difficult. In order to find some other means of extracting information about the flame structure from its radiation, the feasibility of using multispectral color photography was successfully evaluated. Since the flame photographs are close-ups, there is a considerable parallax between the single images, when several cameras are used, and additive color viewing is not possible. Each image must be analyzed individually, it is advisable to use color film in all cameras. One can either use color films of different spectral sensitivities or color films of the same type with different color filters. Sharp cutting filters are recommended.

Stoffers, G.↗

NASA NTRS1978

The application of smart sensor techniques to a solid-state array multispectral sensor

The solid-state array spectroradiometer (SAS) developed at JSC for remote sensing applications is a multispectral sensor which has no moving parts, is virtually maintenance-free, and has the ability to provide data which requires a minimum of processing. The instrument is based on the 42 x 342 element charge injection device (CID) detector. This system allows the combination of spectral scanning and across-track spatial scanning along with its associated digitization electronics into a single detector.

Mcfadin, L. W.↗

NASA NTRS1978

Multispectral data acquisition and classification - Statistical models for system design

In this paper we relate the statistical processes that are involved in multispectral data acquisition and classification to a simple radiometric model of the earth surface and atmosphere. If generalized, these formulations could provide an analytical link between the steadily improving models of our environment and the performance characteristics of rapidly advancing device technology. This link is needed to bring system analysis tools to the task of optimizing remote sensing and (real-time) signal processing systems as a function of target and atmospheric properties, remote sensor spectral bands and system topology (e.g., image-plane processing), radiometric sensitivity and calibration accuracy, compensation for imaging conditions (e.g., atmospheric effects), and classification rates and errors.

Huck, F. O.↗

NASA NTRS1978

Bandwidth compression of multispectral satellite imagery

The results of two studies aimed at developing efficient adaptive and nonadaptive techniques for compressing the bandwidth of multispectral images are summarized. These techniques are evaluated and compared using various optimality criteria including MSE, SNR, and recognition accuracy of the bandwidth compressed images. As an example of future requirements, the bandwidth requirements for the proposed Landsat-D Thematic Mapper are considered.

Habibi, A.↗

NASA NTRS1979

Landsat-D thematic mapper simulation in an urban area using aircraft multispectral scanner data

A simulation of imagery from the Landsat-D thematic mapper was conducted in order to determine its usefulness for urban land-use classification. Aircraft 24-channel multispectral scanner imagery of the Los Angeles area at 7.5-m resolution was processed digitally by means of matrix averaging and image smoothing techniques to simulate the 30-m resolution of the thematic mapper. Mean and standard deviation statistics of training sites for resolutions of 7.5, 15, 30 and 60 m were used to generate final classification maps. Plots of relative standard deviation showed that for larger training sites, as the resolution decreased, the distribution range of density values also decreased, while plots of relative classification accuracies showed that as resolution decreased, classification accuracies for three levels of standard deviation increased. A point of diminishing returns was indicated, however, confirming the utility of the resolution intended for Landsat-D.

Clark, J.↗

NASA NTRS1979

Demonstration of wetland vegetation mapping in Florida from computer-processed satellite and aircraft multispectral scanner data

The success of remotely mapping wetland vegetation of the southwestern coast of Florida is examined. A computerized technique to process aircraft and LANDSAT multispectral scanner data into vegetation classification maps was used. The cost effectiveness of this mapping technique was evaluated in terms of user requirements, accuracy, and cost. Results indicate that mangrove communities are classified most cost effectively by the LANDSAT technique, with an accuracy of approximately 87 percent and with a cost of approximately 3 cent per hectare compared to $46.50 per hectare for conventional ground survey methods.

Butera, M. K.↗

NASA NTRS1979

On-board multispectral classification study. Volume 2: Supplementary tasks

The operational tasks of the onboard multispectral classification study were defined. These tasks include: sensing characteristics for future space applications; information adaptive systems architectural approaches; data set selection criteria; and onboard functional requirements for interfacing with global positioning satellites.

Ewalt, D.↗

NASA NTRS1979

Processing of multispectral thermal IR data for geologic applications

Multispectral thermal IR data were acquired with a 24-channel scanner flown in an aircraft over the E. Tintic Utah mining district. These digital image data required extensive computer processing in order to put the information into a format useful for a geologic photointerpreter. Simple enhancement procedures were not sufficient to reveal the total information content because the data were highly correlated in all channels. The data were shown to be dominated by temperature variations across the scene, while the much more subtle spectral variations between the different rock types were of interest. The image processing techniques employed to analyze these data are described.

Kahle, A. B.↗

NASA NTRS1980

The pointable multispectral linear array system and the large format camera for early 1980 shuttle payloads

Design options are described for the multispectral linear arrays which will provide data and facilities beyond those obtained by LANDSAT 1, 2, 3, and D (the thematic mapper) are considered. The features, uses, and risks of a 10M fine resolution pointable imager, a 15M/30M dual resolution pointable imager, a 30M selectable spectral resolution pointing imager, a 30M electronically pointable multi-temporal sampler, and a 40M/80M mixed resolution imager are described. A large format camera scheduled for 1981 shuttle launch which can obtain high spatial ground resolution (approximately 10M), a relative position accuracy of plus or minus 14M, and a relative heightening accuracy, by virtue of stereographic coverage, of between 7 and 28M depending on the base-to-height ratio used. A potential problem of the system is that it will orbit in the shuttle.

Slater, P. N.↗

NASA NTRS1980

The time-space relationship of the data point (Pixels) of the thematic mapper and multispectral scanner or the myth of simultaneity

A simplified explanation of the time space relationships among scanner pixels is presented. The examples of the multispectral scanner (MSS) on Landsats 1, 2, and 3 and the thematic mapper (TM) of Landsat D are used to describe the concept and degree of nonsimultaneity of scanning system data. The time aspects of scanner data acquisition and those parts of the MSS and TM systems related to that phenomena are addressed.

Gordon, F., Jr.↗

NASA NTRS1980

Multispectral scanner optical system

An optical system for use in a multispectral scanner of the type used in video imaging devices is disclosed. Electromagnetic radiation reflected by a rotating scan mirror is focused by a concave primary telescope mirror and collimated by a second concave mirror. The collimated beam is split by a dichroic filter which transmits radiant energy in the infrared spectrum and reflects visible and near infrared energy. The long wavelength beam is filtered and focused on an infrared detector positioned in a cryogenic environment. The short wavelength beam is dispersed by a pair of prisms, then projected on an array of detectors also mounted in a cryogenic environment and oriented at an angle relative to the optical path of the dispersed short wavelength beam.

Stokes, R. C.↗

NASA NTRS1980

High speed lookup table approach to radiometric calibration of multispectral image data

A concept for performing radiometric correction of multispectral image data onboard a spacecraft at very high data rates is presented and demonstrated. This concept utilized a lookup table approach, implemented in hardware, to convert the raw sensor data into the desired corrected output data. The digital lookup table memory was interfaced to a microprocessor to allow the data correction function to be completely programmable. Sensor data was processed with this approach at rates equal to the access time of the lookup table memory. This concept offers flexible high speed data processing for a wide range of applications and will benefit from the continuing improvements in performance of digital memories.

Kelly, W. L., IV↗

NASA NTRS1979

Multispectral Resource Sampler - An experimental satellite sensor for the mid-1980s

An experimental pushbroom scan sensor, the Multispectral Resource Sampler (MRS), being developed by NASA for a future earth orbiting flight is presented. This sensor will provide new earth survey capabilities beyond those of current sensor systems, with a ground resolution of 15 m over a swath width of 15 km in four bands. The four arrays are aligned on a common focal surface requiring no beamsplitters, thus causing a spatial separation on the ground which requires computer processing to register the bands. Along track pointing permits stereo coverage at variable base/height ratios and atmospheric correction experiments, while across track pointing will provide repeat coverage, from a Landsat-type orbit, of every 1 to 3 days. The MRS can be used for experiments in crop discrimination and status, rock discrimination, land use classification, and forestry.

Schnetzler, C. C.↗

NASA NTRS1979

California desert resource inventory using multispectral classification of digitally mosaicked Landsat frames

Procedures for adjustment of brightness values between frames and the digital mosaicking of Landsat frames to standard map projections are developed for providing a continuous data base for multispectral thematic classification. A combination of local terrain variations in the Californian deserts and a global sampling strategy based on transects provided the framework for accurate classification throughout the entire geographic region.

Bryant, N. A.↗

NASA NTRS1979

A method for classifying multispectral remote sensing data using context

The paper describes a method of classifying multispectral remote sensing data using a context classifier. Because the computational requirements of the context classifier are very large, its implementation on parallel/pipelined multiprocessor systems is being investigated, so that the types of computations can be efficiently implemented. Special considerations necessary for such implementations are discussed, with particular reference to implementation on an array of Control Data Corporation Flexible Processors.

Swain, P. H.↗

NASA NTRS1980

Middle infrared multispectral aircraft scanner data - Analysis for geological applications

Multispectral middle IR (8-13 microns) data were acquired with an aircraft scanner over Utah. Because these digital image data were dominated by temperature, all six channels were highly correlated. Extensive processing was required to allow geologic photointerpretation based on subtle variations in spectral emittance between rock types. After preliminary processing, ratio images were produced and color ratio composites created from these. Sensor calibration and an atmospheric model allowed determination of surface brightness, temperature, emittance, and color composite emittance images. The best separation of major rock types was achieved with a principal component transformation, followed by a Gaussian stretch, followed by an inverse transformation to the original axes.

Kahle, A. B.↗