Search NASA⌕ Search

SEARCH · Search NASA

Results for “Normal forms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

The origin of the 'FUN' anomalies and the high temperature inclusions in the Allende meteorite

The discovery of isotopic anomalies in white inclusions of the meteorite Allende has led to fundamental questions concerning the origin of these anomalies and of the white inclusions themselves. An analysis of the 'FUN' anomalies in the inclusions C1 and EK1-4-1 demonstrates that these isotopic anomalies may be decomposed into individual nucleosynthetic components, which have been subjected to separate mass and component fractionations. There is no evidence that any freshly-synthesized material injected into the primitive solar nebula was of abnormal isotopic composition, or that the FUN anomalies were due to an injection of unusual material. Rather, they show the effects of large mass fractionations and an unusual mixture of normal nucleosynthetic material, likely to be in the form of interstellar grains whose size or chemistry served as a memory for the nucleosynthetic origins of their constituent atoms. Giant gaseous protoplanets, as described for the early solar nebula by Cameron (1978), are a potential site for achieving both mass and component fractionations, and for producing white inclusions in general.

Consolmagno, G. J.↗

Modification to shock fitting program

A modified form of the Lepping - Argentiero single spacecraft, shock normal determination procedure is presented. The modified method incorporates a simple predictor-corrector algorithm which allows a faster convergence rate and the use of average values of the parameters for the starting vector.

Acuna, M. H.↗

Theoretical design and analysis of the layered synthetic microstructure optic for the dual path X-ray telescope

A ray tracing analysis was performed for several configurations for the inner channel of the dual path X-ray telescope, which is proposed to use the second mirror of the Stanford/MSFC Wolter-Schwarzchild telescope and a normal incident layered synthetic microstructure (LSM) mirror to form a secondary image near the front of the telescope. The LSM mirror shapes considered were spherical, ellipsoid, hyperboloid, and constant optical path length (OPL) aspheric. Only the constant OPL case gave good axial resolution. All cases had poor off axis resolution as judged by the RMS blur circle radius.

Shealy, D. L.↗

Transitional, hypervelocity aerodynamic simulation and scaling in light of recent flight data

Simulation and scaling procedures applicable to maneuvering vehicles for the transitional hypervelocity flow regime are discussed with reference to certain discrepancies between lifting reentry flight data and predicted results. Low-density hypervelocity wind-tunnel data are compared with CFD and in-flight measurements. A general correlation parameter for transitional flow is produced by incorporation of a new geometric term into a form of Reynolds number. It is shown that normalized drag coefficients of a variety of shapes, including spheres, blunt-nosed cones, lifting bodies, and an STS orbiter are correlated by the parameter. A provisional bridging formula for the coefficients is presented.

Potter, J. L.↗

Toward a systematic design theory for silicon solar cells using optimization techniques

This work is a first detailed attempt to systematize the design of silicon solar cells. Design principles follow from three theorems. Although the results hold only under low injection conditions in base and emitter regions, they hold for arbitrary doping profiles and include the effects of drift fields, high/low junctions and heavy doping concentrations of donor or acceptor atoms. Several optimal designs are derived from the theorems, one of which involves a three-dimensional morphology in the emitter region. The theorems are derived from a nonlinear differential equation of the Riccati form, the dependent variable of which is a normalized recombination particle current.

Misiakos, K.↗

On meteor stream spatial structure theory

The classical spatial representation of meteor streams is an elliptical torus with variable cross section. The position of this torus in space is determined by the mean orbit elements that may be obtained directly from observations of individual meteor stream particles when crossed by the Earth. Since the orbits of individual particles of a stream differ from each other, the distance between them on a plane normal to the mean orbit of elliptical torus forms some area, i.e., a cross section. The size and form of these cross sections change with the change of the direction among the mean orbit and are completely defined by the dispersion values of the orbit elements in a stream. An attempt was made to create an analytical method that would permit description of the spatial and time parameters of meteor streams, i.e., the form and size of their cross section, density of incident flux and their variations along the mean orbit and in time. In this case, the stream is considered as a continuous flux rather than a set of individual particles.

Andreev, G. V.↗

Local delamination in laminates with angle ply matrix cracks. Part 1: Tension tests and stress analysis

Quasi-static tension tests were conducted on AS4/3501-6 graphite epoxy laminates. Dye penetrant enhanced x-radiography was used to document the onset of matrix cracking and the onset of local delaminations at the intersection of the matrix cracks and the free edge. Edge micrographs taken after the onset of damage were used to verify the location of the matrix cracks and local delamination through the laminate thickness. A quasi-3D finite element analysis was conducted to calculate the stresses responsible for matrix cracking in the off-axis plies. Laminated plate theory indicated that the transverse normal stresses were compressive. However, the finite element analysis yielded tensile transverse normal stresses near the free edge. Matrix cracks formed in the off-axis plies near the free edge where in-plane transverse stresses were tensile and had their greatest magnitude. The influence of the matrix crack on interlaminar stresses is also discussed.

Obrien, T. Kevin↗

Kinetic structure of slow shocks - Effects of the electromagnetic ion/ion cyclotron instability

The structure of slow magnetosonic shocks in the low beta regime is analyzed with attention given to ion heating and the effects of waves upstream of the electromagnetic ion/ion cyclotron (EMIIC) instability. Shock formation is assessed by means of three methods - a relaxation method and two based on dynamic flow interactions - to determine the effects of initialization and boundary conditions on the formation. Good solutions are found with the piston method and the similar flow-flow method in which the plasma is injected from two boundaries to form two slow shocks. Plasma parameters and shock normal angle are found to be the key variables dictating the structure of the magnetosonic shocks. Four unique classes of resultant shock structures are described in which classical, steady, or nonsteady behavior is found. The analysis also yields insight into the relationship between EMIIC instability and ion dissipation.

Omidi, N.↗

The soft X-ray diffuse background observed with the HEAO 1 low-energy detectors

Results of a study of the diffuse soft-X-ray background as observed by the low-energy detectors of the A-2 experiment aboard the HEAO 1 satellite are reported. The observed sky intensities are presented as maps of the diffuse X-ray background sky in several energy bands covering the energy range 0.15-2.8 keV. It is found that the soft X-ray diffuse background (SXDB) between 1.5 and 2.8 keV, assuming a power law form with photon number index 1.4, has a normalization constant of 10.5 +/- 1.0 photons/sq cm s sr keV. Below 1.5 keV the spectrum of the SXDB exceeds the extrapolation of this power law. The low-energy excess for the NEP can be fitted with emission from a two-temperature equilibrium plasma model with the temperatures given by log I1 = 6.16 and log T2 = 6.33. It is found that this model is able to account for the spectrum below 1 keV, but fails to yield the observed Galactic latitude variation.

Garmire, G. P.↗

The pressure distribution over a standard and a modified Navy elliptical wing tip on a biplane in flight

This note presents the results of flight pressure distribution tests on the right upper wing panel of a Douglas M-3 airplane equipped in turn with a standard Navy elliptical tip and a tip having the same plan form but modified in its front elevation from the swept-up aspect of the standard tip to a symmetrical aspect. The results are given in such form that the load distribution for any normal-force coefficient within the usual range encountered in flight may easily be determined. The results indicate that the modification in front elevation of the tip had no appreciable effect on the load distribution.

Rhode, Richard V↗

The pressure distribution over a long elliptical wing tip on a biplane in flight

This note presents the results of flight pressure-distribution tests on the right upper wing panel of a Douglas M-3 airplane equipped with an elliptical tip of length equal to the wing chord. The results are given in such form that the load distribution for any normal-force coefficient within the usual range encountered in flight may easily be determined.

Rhode, Richard V↗

Pressure Distribution Over Thick Tapered Airfoils, NACA 81, USA 27c Modified and USA 35

At the request of the United States Army Air Service, the tests reported herein were conducted in the 5-foot atmospheric wind tunnel of the Langley Memorial Aeronautical Laboratory. The object was the measurment of pressures over three representative thick, tapered airfoils which are being used on existing or forthcoming army airplanes. The results are presented in the form of pressure maps, cross-plan load and normal force coefficient curves and load contours. The pressure distribution along the chord was found very similar to that for thin wings, but with a tendency toward greater negative pressures. The characteristics of the loading across the span of the U. S. A. 27 C modified are inferior to those of the other two wings; in the latter the distribution is almost exactly elliptical throughout the usual range of flying angles. The form of tip incorporated in these models is not completely satisfactory and a modification is recommended. (author)

Reid, Elliott G↗

Pressure distribution on wings in reversed flow

The series of pressure distribution measurements at three test sections on NACA airfoils 2212 and M6 within 170 to 210 angles of attack in reversed flow proved to be largely independent of the profile form. In contradiction to the pressure distribution in normal flow considerable negative pressure from the upper surface spills over onto the lower surface, and vice versa, even in the zone of sound flow. The results are presented as chord-wise pressure and load distribution. The spanwise lift distribution and the total lift coefficients of the wing obtained by integration manifest approximate agreement with the behavior of a diagonally disposed flat plate. By consideration of the ground effect (represented by a flat wall) the lower surface of the wing shows an increase in the low pressure.

Naumann, A↗

Vortex generation and wave-vortex interaction over a concave plate with roughness and suction

The generation and amplification of vortices by surface homogeneities, both in the form of surface waviness and of wall-normal velocity, is investigated using the nonlinear parabolic stability equations. Transients and issues of algebraic growth are avoided through the use of a similarity solution as initial condition for the vortex. In the absence of curvature, the vortex decays as the square root of 1/x when flowing over streamwise aligned riblets of constant height, and grows as the square root of x when flowing over a corresponding streamwise aligned variation of blowing/suction transpiration velocity. However, in the presence of wall inhomogeneities having both streamwise and spanwise periodicity, the growth of the vortex can be much larger. In the presence of curvature, the vortex develops into a Gortler vortex. The 'direct' and 'indirect' interaction mechanisms possible in wave-vortex interaction are presented. The 'direct' interaction does not lead to strong resonance with the flow conditions investigated. The 'indirect' interaction leads to K-type transition.

Bertolotti, Fabio↗

Graviceptor development in jellyfish ephyrae in space and on Earth

Graviceptor (rhopalium) development in Aurelia aurita ephyrae which developed on Earth and in space during the nine-day NASA SLS-1 mission was compared. The space-developed ephyrae made graviceptors which were morphologically similar to those of their ground-based controls. Rhopalia of both groups developed statocysts with statoliths, ocelli, ciliated mechanoreceptor cells, and immature touch-plates with one type of hair cell. The number of rhopalia formed per arm of ephyrae of both groups revealed no significant differences. The number of statoliths formed per rhopalium was statistically higher in ephyrae which were induced to form in space with iodine than in L(Launch)+8h controls. Statolith numbers were not significantly different between Earth-formed control ephyrae and those formed from polyps induced on Earth and then sent into space 24h and 48h later. Statolith loss from rhopalia was significantly enhanced in the space-maintained ephyrae in artificial sea water (ASW) as compared to their controls. Ephyrae formed through thyroxine treatment and those maintained in thyroxine in space had statolith numbers comparable to thyroxine-treated controls. Pulsing abnormalitities seen in some space-developed ephyrae suggest that some space-formed ephyrae may have developed abnormal rhopalia because normal rhopalia development and function is necessary for normal pulsing.

Spangenberg, D. B.↗

An Agile Beam Transmit Array Using Coupled Oscillator Phase Control

A few years ago York and colleagues suggested that injection locking of voltage controlled oscillators could be used to implement beam steering in a phased array [I]. The scheme makes use of the fact that when an oscillator is injection locked to an external signal, the phase difference between the output of the oscillator and the injection signal is governed by the difference between the injection frequency and the free running frequency of the oscillator (the frequency to which the oscillator is tuned). Thus, if voltage controlled oscillators (VCOs) are used, this phase difference is controlled by an applied voltage. Now, if a set of such oscillators are coupled to nearest neighbors, they can be made to mutually injection lock and oscillate as an ensemble. If they are all tuned to the same frequency, they will all oscillate in phase. Thus, if the outputs are connected to radiating elements forming a linear array, the antenna will radiate normal to the line of elements. Scanning is accomplished by antisymmetrically detuning the end oscillators in the array by application of a pair of appropriate voltages to their tuning ports. This results in a linear phase progression across the array which is just the phasing required to scan the beam. The scan angle is determined by the degree of detuning. We have constructed a seven element one dimensional agile beam array at S-band based on the above principle. Although, a few such arrays have been built in the past, this array possesses two unique features. First, the VCO MMICs have buffer amplifiers which isolate the output from the tuning circuit, and second, the oscillators are weakly coupled to each other at their resonant circuits rather than their outputs. This results in a convenient isolation between the oscillator array design and the radiating aperture design. An important parameter in the design is the so called coupling phase which determines the phase shift of the signals passing from one oscillator to its neighbors. Using this array, we have been able to verify the theoretical predictions concerning the effect of this phase on both the locking range and ensemble frequency of the array. However, the scan range achieved fell somewhat short of the theoretical value because of the amplitude variation of the oscillator outputs with tuning.

Pogorzelski, Ronald S.↗

Free-Flight Investigation of the Static and Dynamic Longitudinal Stability Characteristics of 1/3.7-Scale Rocket-Powered Models of the Bell MX-776A

An investigation of the static and dynamic longitudinal stability characteristics of 1/3.7 scale rocket-powered model of the Bell MX-776A has been made for a Mach number range from 0.8 to 1.6. Two models were tested with all control surfaces at 0 degree deflection and centers of gravity located 1/4 and 1/2 body diameters, respectively, ahead of the equivalent design location. Both models were stable about the trim conditions but did not trim at 0 degree angle of attack because of slight constructional asymmetries. The results indicated that the variation of lift and pitching moment was not linear with angle of attack. Both lift-curve slope and pitching-moment-curve slope were of the smallest magnitude near 0 degree angle of attack. In general, an increase in angle of attack was accompanied by a rearward movement of the aerodynamic center as the rear wing moved out of the downwash from the forward surfaces. This characteristic was more pronounced in the transonic region. The dynamic stability in the form of total damping factor varied with normal-force coefficient but was greatest for both models at a Mach number of approximately 1.25. The damping factor was greater at the lower trim normal-force coefficients except at a Mach number of 1.0. At that speed the damping factor was of about the same magnitude for both models. The drag coefficient increased with trim normal-force coefficient and was largest in the transonic region.

Michal, David H.↗

Bisphosphonate Treatment: Risk Management in Long Duration Spaceflight

Bisphosphonates are a class of pharmaceuticals used to treat diverse bone disorders such as osteoporosis, Paget's disease, and multiple myeloma. They constitute a class of drugs which adhere to bony surfaces and interfere with the resorptive activity of osteoclasts. They also represent a potential countermeasure towards the loss of bone mass experienced by astronauts during spaceflight. Recently, the medical literature has revealed cases of osteonecrosis of the jaw in individuals receiving intravenous bisphosphonate therapy with a smaller number of cases occurring in individuals receiving the oral form of the medication. Risk management for long duration missions requires consideration of mission success and lifetime health care of astronauts. We performed MEDLINE and PubMed searches (1966 December 2006) using the following keywords: osteonecrosis, jaw, bisphosphonates. Additional references were obtained from the citations of the retrieved articles. Injectable bisphosphonates such as pamidronate and zoledronic acid have been highlighted recently in the literature due to a possible link with osteonecrosis of the jaw. The mechanism of action remains unclear but may be linked to physiologic microdamage in the jawbones resulting from suppression of bone metabolism. The most predisposing factors appear to be the type and dose of bisphosphonate used, a history of dental surgery, trauma, and/or dental infection. In addition, patients diagnosed with a malignancy such as breast cancer or multiple myeloma, who have been on intravenous bisphosphonate therapy for several months seem to be at increased risk. The use of oral bisphosphonates appears to place patients more at risk from acute events such as gastrointestinal tract injury or perforation. Although some studies report little to no increase in GI events compared to placebo, we must remember that in microgravity, astronauts may be unable to comply with medication instructions. They may have difficulty remaining upright for the required 30-45 minutes post-ingestion. We are currently unaware if this inability to comply with instructions on the package insert may lead to an increased risk for GI events. There is a potential long-term complication that resides with both forms of bisphosphonate therapy. In order to repair normally occurring physiologic microdamage to bone, both osteoclastic resorption and osteoblastic bone deposition must be functional. Controversy exists in the literature regarding whether prolonged use of bisphosphonates may lead to the suppression of bone turnover and accumulation of microdamage. Bisphosphonates are a powerful class of drugs that suppress bone turnover, but may cause serious adverse clinical events such as gastrointestinal tract injury or osteonecrosis of the jaw. Unfortunately, little to no data exists currently which may help us provide answers regarding the risks of their use in a healthy astronaut cohort. While controversy exists in the literature regarding their mechanism and long-term consequences, the potential mission impact or lifetime health care impact of an adverse clinical event resulting from bisphosphonate therapy must be considered.

Fogarty, Jennifer A.↗