SEARCH · Search NASA

Results for “PHOTON ABSORPTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Constraints on low-mass, relic dark matter candidates from a surface-operated SuperCDMS single-charge sensitive detector

This article presents an analysis and the resulting limits on light dark matter inelastically scattering off of electrons, and on dark photon and axionlike particle absorption, using a second-generation SuperCDMS high-voltage eV-resolution detector. The 0.93 g Si detector achieved a 3 eV phonon energy resolution; for a detector bias of 100 V, this corresponds to a charge resolution of 3% of a single electron-hole pair. The energy spectrum is reported from a blind analysis with 1.2 g-days of exposure acquired in an above-ground laboratory. With charge carrier trapping and impact ionization effects incorporated into the dark matter signal models, the dark matter-electron cross section σ ¯ e is constrained for dark matter masses from 0.5 to 10 4 MeV / c 2 ; in the mass range from 1.2 to 50 eV / c 2 the dark photon kinetic mixing parameter ϵ and the axioelectric coupling constant g a e are constrained. The minimum 90% confidence-level upper limits within the above-mentioned mass ranges are σ ¯ e = 8.7 × 10 - 34 cm 2 , ϵ = 3.3 × 10 - 14 , and g a e = 1.0 × 10 - 9 .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

NASA NTRS2017

Airborne Demonstration of Atmospheric Oxygen Optical Depth Measurements with an Integrated Path Differential Absorption Lidar

We report on an airborne demonstration of atmospheric oxygen (O2) optical depth measurements with an Integrated Path Differential Absorption (IPDA) lidar using a fiber-based laser transmitter and photon counting detectors. Accurate atmospheric temperature and pressure measurements are needed for NASA's Active Sensing of CO2 Emissions over Nights, Days and Seasons (ASCENDS) mission. Since O2 is uniformly mixed in the atmosphere, its spectrum can be used to estimate the dry mixing ratio of CO2. In its airborne configuration, the IPDA lidar uses an Erbium Doped Fiber amplifier, a frequency doubler and single photon counting detectors to measure O2 absorption at multiple wavelengths near 765 nm. This instrument was deployed in 2013 and 2014 aboard NASA's DC-8 airborne laboratory as part of two campaigns to measure CO2 mixing ratios over a wide range of topography and weather conditions from altitudes ranging between 3 km and 13 km. In this paper we will review a summary of the results from our flights, discuss the errors that limit the precision and accuracy of the measurement and identify possible areas of improvement.

Methane↗

NASA NTRS1991

Two-dimensional imaging of molecular hydrogen in H2-air diffusion flames using two-photon laser-induced fluorescence

The use of a tunable ArF laser at 193.26 nm to record simultaneous single-laser-shot, planar images of molecular hydrogen and hot oxygen in a turbulent H2-air diffusion flame. Excitation spectra of fuel and oxidant-rich flame zones confirm a partial overlap of the two-photon H2 and single-photon O2 Schumann-Runge absorption bands. UV Rayleigh scattering images of flame structure and estimated detection limits for the H2 two-photon imaging are also presented.

Lempert, W.↗

DOE OSTI2025

Coupling to rotational manifolds to improve gas-phase pump–probe spectroscopic models

The physical picture of gas-phase optical transitions is normally presented as an isolated two-level system balanced by upward and downward processes. Isolated models assume a phenomenological treatment of collisional dephasing but do not strictly account for collisional population exchange with the rotational baths. While this assumption is valid under low-intensity conditions, where excitation is rate-limiting, isolated models can deviate from Beer’s Law at sufficient pressures and monochromatic intensities when both collisional broadening and power broadening are comparable to (or greater than) lifetime broadening, which are not uncommon conditions for cavity enhanced spectroscopies in the mid-IR spectral range. Although this problem has been addressed by rate-equation models for linear absorption measurements, a general treatment for multi-level quantum mechanical models suitable for non-linear absorption measurements (two-photon/two-color/pump–probe) is lacking. Isolated models require physical parameter inputs that disagree with expected values by at least an order of magnitude. These non-physical models undermine the ability to predict non-linear signal strengths under untested conditions and thereby limit the potential to optimize the sensitivity of non-linear spectroscopies and to expand their analytical applications (e.g., new analytes and/or buffer gases, changes in cavity free-spectral-range, changes in intracavity powers or wavelengths, and accurate investigation of physical phenomena). In this study, we derive bath-coupled models for gaseous pump–probe spectroscopy by application of the quantum Lindblad equation and detailed balance. Bath-coupled models are shown to fit data consistently across variations in intensity and agree with all physically expected values.

Cavity ring-down spectroscopy↗

DOE OSTI2021

Regio‐Regular Polymer Acceptors Enabled by Determined Fluorination on End Groups for All‐Polymer Solar Cells with 15.2 % Efficiency

Abstract Polymerization sites of small molecule acceptors (SMAs) play vital roles in determining device performance of all‐polymer solar cells (all‐PSCs). Different from our recent work about fluoro‐ and bromo‐ co‐modified end group of IC‐FBr (a mixture of IC‐FBr1 and IC‐FBr2), in this paper, we synthesized and purified two regiospecific fluoro‐ and bromo‐ substituted end groups (IC‐FBr‐ o & IC‐FBr‐ m ), which were then employed to construct two regio‐regular polymer acceptors named PYF‐T‐ o and PYF‐T‐ m , respectively . In comparison with its isomeric counterparts named PYF‐T‐ m with different conjugated coupling sites, PYF‐T‐ o exhibits stronger and bathochromic absorption to achieve better photon harvesting. Meanwhile, PYF‐T‐ o adopts more ordered inter‐chain packing and suitable phase separation after blending with the donor polymer PM6, which resulted in suppressed charge recombination and efficient charge transport. Strikingly, we observed a dramatic performance difference between the two isomeric polymer acceptors PYF‐T‐ o and PYF‐T‐ m . While devices based on PM6:PYF‐T‐ o can yield power conversion efficiency (PCE) of 15.2 %, devices based on PM6:PYF‐T‐ m only show poor efficiencies of 1.4 %. This work demonstrates the success of configuration‐unique fluorinated end groups in designing high‐performance regular polymer acceptors, which provides guidelines towards developing all‐PSCs with better efficiencies.

Yu, Han↗

DOE OSTI2021

Regio‐Regular Polymer Acceptors Enabled by Determined Fluorination on End Groups for All‐Polymer Solar Cells with 15.2 % Efficiency

Yu, Han↗

DOE OSTI2021

Engineering a Non–Natural Photoenzyme for Improved Photon Efficiency

We developed a novel HTS engineering platform to optimize photoenzymatic activity. The improvements in variants were correlated to an increase in enzymatic photon efficiency. Here, transient absorption spectroscopy revealed a shift from a stepwise to a concerted mechanism. The platform was expanded to improve the synthesis of γ, δ, ϵ-lactams, and acyclic amides.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2021

Preferential Direction of Electron Transfers at a Dye–Metal Oxide Interface with an Insulating Fluorinated Self-Assembled Monolayer and MgO

Slowing non-desirable electron transfer reactions at metal oxide-dye interfaces is important for many technologies. Specifically, after an interfacial photoinduced charge separation event at a metal oxide-dye interface, it is critically important to limit the rate of electron transfer reactions back to sensitizers and to limit electron transfer reactions between the electrolyte and the metal oxide. Ruthenium-based dyes at metal oxide interfaces are widely used in many fields; however, these dyes often have poor surface insulation resulting in fast recombination kinetics with transition metal-based redox shuttles in an electrolyte. This work explores two semiconductor surface modification strategies designed to minimize recombination events of electrons in TiO 2 with oxidized redox shuttles using a fluorinated siloxane insulator (PFTS) and a metal oxide insulator (MgO) with a well-known Ru dye, B11. Additionally, the influence of these treatments on the rate and duration of photoinduced interfacial charge separation at the TiO 2 -dye interface was examined. The TiO 2 -dye-redox shuttle systems were studied via dye-sensitized solar cell current-voltage curve, incident photon-to-current conversion efficiency, small-modulated photovoltage transient, time-correlated single photon counting, and transient absorption spectroscopy measurements. MgO was found to decrease the rate of the electron transfer reaction from the metal oxide to the electrolyte, decrease the rate of the electron transfer reaction to the oxidized dye from TiO 2 , increase the electron transfer reaction rate from a reduced redox shuttle to an oxidized dye, and decrease the electron injection rate from the photoexcited dye to TiO2. Interestingly, PFTS was found to desirably improve on these rates relative to MgO or untreated TiO 2 . Here, a model based on electrostatic interactions is presented to explain the exceptional behavior of PFTS with DFT computational analysis of PFTS supporting this model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Two Cycling Centers in One Molecule: Communication by Through-Bond Interactions and Entanglement of the Unpaired Electrons

Many applications in quantum information science (QIS) rely on the ability to laser- cool molecules. The scope of applications can be expanded if laser-coolable molecules possess two or more cycling centers, i.e., moieties capable of scattering photons via multiple absorption-emission events. Here in this paper we employ equation-of-motion coupled-cluster method for double electron attachment (EOM-DEA-CCSD) to study the electronic structure of hypermetallic molecules with two alkaline earth metals connected by an acetylene linker. The electronic structure of the molecules is similar to that of two separated alkali metals; however, the interaction between the two electrons is weak and largely dominated by through-bond interactions. The communication between the two cycling centers is quantified by the extent of the entanglement of the two unpaired electrons associated with each center. This contribution highlights the rich electronic structure of hypermetallic molecules that may advance various applications in QIS and beyond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Tailoring non-fullerene acceptors using selenium-incorporated heterocycles for organic solar cells with over 16% efficiency

The selenium substitution strategy was applied to develop two new A′-DAD-A′-type small molecular acceptors. The resulting selenium-incorporated molecules exhibit red-shifted absorption and an enhanced photon response, leading to high device efficiencies of over 16%.

Yu, Han↗

DOE OSTI2022

3D In-situ Stop Action Study of Recrystallization in Additively Manufactured 316L Stainless Steel: Reconstruction Optimization and Observations

A volume of an additively manufactured 316L stainless steel sample has been tracked during its recrystallization using near-and far-field High Energy Diffraction Microscopy (HEDM) and absorption tomography at Advanced Photon Source beamline 1-ID. A nearfield compatible in situ furnace allows monitoring of Bragg diffraction signals as they evolve out of a weak and diffuse background while the sample temperature is approximate to 1250 degrees C. The sample is rapidly cooled to room temperature after observation of significant signal evolution and ti similar to 0.035 mm(3) is mapped by the near-field method. Four cycles of heat treatment follow the structure from a state of small, isolated grains through impingement of domains to near completion of recyrstallization. Here, the experiment and reconstructions are described, and recrystallized fractions, twin domains, and distributions of grain boundary types are discussed.

Liu, He↗

DOE OSTI2022

Evaluating Lyman- α constraints for general dark-matter velocity distributions: Multiple scales and cautionary tales

One of the most important observational constraints on possible models of dark-matter physics exploits the Lyman-α absorption spectrum associated with photons traversing the intergalactic medium. Because these data allow us to probe the linear matter power spectrum with great accuracy down to relatively small distance scales, finding ways of accurately evaluating such Lyman-α constraints across large classes of candidate models of dark-matter physics is of paramount importance. While such Lyman-α constraints have been evaluated for dark-matter models that give rise to relatively simple dark-matter velocity distributions, more complex models—particularly those whose dark-matter velocity distributions stretch across multiple scales—have recently been receiving increasing attention. In this paper, we undertake a study of the Lyman-α constraints associated with general dark-matter velocity distributions. Although such Lyman-α constraints are difficult to evaluate in principle, in practice there currently exist two classes of methods in the literature through which such constraints can be recast into forms which are easier to evaluate and which therefore allow a more rapid determination of whether a given dark-matter model is ruled in or out. Accordingly, we utilize both of these recasts in order to determine the Lyman-α bounds on different classes of dark-matter velocity distributions. Here we also develop a general method by which the results of these different recasts can be compared. For relatively simple dark-matter velocity distributions, we demonstrate that these two classes of recasts tend to align and give similar results. However, we find that the situation is far more complex for distributions involving multiple velocity scales: while these two classes of recasts continue to yield similar results within certain regions of parameter space, they nevertheless yield dramatically different results within precisely those regions of parameter space which are likely to be phenomenologically relevant. This, then, serves as a cautionary tale regarding the use of such recasts for complex dark-matter velocity distributions.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2020

Enhanced Electron-Phonon Coupling for Charge-Density-Wave Formation in La 1.8-$x$ Eu 0.2 Sr $x$ CuO 4+$δ$

Charge density wave (CDW) correlations are prevalent in all copper-oxide superconductors. While CDWs in conventional metals are driven by coupling between lattice vibrations and electrons, the role of the electron-phonon coupling (EPC) in cuprate CDWs is strongly debated. Using Cu L 3 edge resonant inelastic x-ray scattering, we study the CDW and Cu-O bond-stretching phonons in the stripe-ordered cuprate La 1.8-x Eu 0.2 Sr x CuO 4+δ . In this work, we investigate the interplay between charge order and EPC as a function of doping and temperature and find that the EPC is enhanced in a narrow momentum region around the CDW ordering vector. By detuning the incident photon energy from the absorption resonance, we extract an EPC matrix element at the CDW ordering vector of M ≃ 0.36 eV , which decreases to M ≃ 0.30 eV at high temperature in the absence of the CDW. Our results suggest a feedback mechanism in which the CDW enhances the EPC which, in turn, further stabilizes the CDW.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Multiwavelength anomalous X-ray diffraction for combined imaging of atomic displacement and strain

The X-ray Bragg coherent diffractive imaging (CDI) technique assumes that the structure factor holds constant over the measured crystal. This approximation breaks down for materials exhibiting variations in the unit-cell configuration, such as piezo- and ferroelectrics. In that case, the strain field cannot be reliably determined from the reconstruction because the lattice deformation and the structure factor contribute concomitantly. Proposed here is a solution to this problem achieved by combining Bragg CDI and the multiwavelength anomalous diffraction approach that measures a Friedel pair of reflections at two different photon energies near an absorption edge. Comparing the obtained reconstructions with a parametric model that includes calculating the scattering amplitude as a function of wavelength and the unit-cell configuration, the contributions of the lattice deformation and the structure factor are separated. Simulations of the ferroelectric material BaTiO 3 demonstrate the possibility of simultaneous probing of the strain and displacement of the Ti atoms. The proposed method opens up an opportunity to apply coherent X-ray diffraction for nanoscale-resolved 3D mapping of polarization domains in micro- and nanocrystals.

lattice deformation↗

DOE OSTI2021

Opacity Table Generation

Radiation opacity is a key property of material systems which describes the absorption and scattering of photons. Such processes are an important part of energy transport, diagnostics, and astrophysical phenomena. Recent experiments in iron opacity and continuum lowering have sparked renewed interest in and careful vetting of opacity models. Even within the local thermodynamic equilibrium approximation, opacity varies over a large parameter space: material, temperature, density, and energy. Opacity tables that span wide regimes of this parameter space are of prime importance to radiation-hydrodynamics codes. Accurate opacity calculations cannot be achieved inline during a radiation hydrodynamics simulation since they involve accounting for all possible electron transitions of all important atomic states of a thermal ensemble. Livermore’s current framework utilizes precalculated tables at many densities, temperatures, and energies. Last year, the opacity theory team completed an L2 milestone concerning the development of a new code, Opus, which served the dual purpose of creating a modern code infrastructure and version control as well as the basis for training new members of that team, a critical need as key members near or are passed retirement. For the current L2 milestone, we exercised and validated Opus on three elements: boron, carbon, and nitrogen, which have few enough electrons to allow a careful convergence study over many input parameters. Here, we report on the production of new tables, show their convergence with respect to important parameters, state some of their limitations, and document a mostly automated production process. In this section, we address the milestone completion criteria, found on the title page and the subsection headings. In section 2, we validate Opus against Tycho and compare with TabOp and Atomic. Section 3 details some of the physics implemented in Opus and relevant to this report. We then cover details of the density-temperature grid in section 4 and do a spectral comparison between different parameter settings and different codes in section 5. After summarizing these results in section 6, we give instructions how to run the opacity table scripts in appendix A and document the scripts and input/output files in appendix B.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1972

Mariner 6 and 7 ultraviolet spectrometer experiment - Implications of CO2/+/, CO, and O airglow.

The Mariner 6 and 7 UV spectrometer experiments observed intense emissions from CO, O, and CO2(+) in the Martian airglow. Analysis shows that they are excited predominantly by the absorption of solar EUV photons by CO2 and constitute a major energy-loss mechanism for the thermosphere. Models of the thermospheric temperature profile and the airglow layer that demonstrate the effects of neutral chemistry and ionospheric composition are developed. With their aid, the observed CO Cameron-band emission scale height of 19 (plus or minus 4.5) km is shown to suggest an exospheric temperature of 315 (plus or minus 75) K. Consideration of other data suggests a 'best' value of about 350 K. Within the uncertainties in the excitation efficiencies and in the thermospheric cooling mechanisms, the observations are consistent with the measured electron density. There is no indication in the data that the ionosphere is modified by the solar wind below 200 km.

Stewart, A. I.↗

NASA NTRS1974

On the theory of H2 rotational excitation

A number of mechanisms for exciting higher-J states in the ground vibrational level are considered. Attention is given to collisions with H atoms and electrons. Other mechanisms involve a cascading down from upper vibrational levels, following absorption and reemission of photons in the Lyman and Werner bands, or a cascading down from upper vibrational levels, following formation of hydrogen molecules in excited vibrational and rotational levels. Theoretical population densities of rotational levels are shown in a graph.

Spitzer, L., Jr.↗

NASA NTRS1982

A mesospheric source of nitrous oxide

In the terrestrial atmosphere, nitrous oxide (N2O) has a major role in the chemistry of ozone. Current atmospheric models assume that N2O is produced only by fixation at the earth's surface and that there are no local sources in the stratosphere or mesosphere. It is pointed out here that a significant in situ N2O source does exist above 20 km due to the excitation of the metastable N2(A 3Sigma u +) state by resonance absorption of solar UV photons that penetrate deeply into the atmosphere through the 1,800-2,200 A O2-O3 window. This source significantly affects the NO altitude distribution in the mesosphere and, in the earth's prebiological atmosphere, made N2O an important stratospheric constituent.

Zipf, E. C.↗