Search NASA⌕ Search

SEARCH · Search NASA

Results for “Panelized”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Passive and active peer effects in the spatial diffusion of residential solar panels: A case study of the Las Vegas Valley

This research analyzes the role of peer influences on the adoption of residential rooftop solar photovoltaic panels (PV) within the context of the Diffusion of Innovation Theory. PV literature indicates that adopters are influenced by word of mouth (WOM) information exchange with peers, i.e., active peer effects, while other studies suggest that living near households with visible rooftop PV installations influences adoption, i.e., passive peer effects. We bridge the gap in this literature by conducting a mixed methods analysis. We develop and administer a survey to Las Vegas Valley (LVV) residents to identify current and potential PV adopters' perceptions of peer-effects and consumer intention variables. We conduct a spatial analysis of Google's Project Sunroof data to identify LVV neighborhoods in the later stages of the PV diffusion process, i.e., those with the highest PV adoption rates. Key results show that current PV adopters living in early diffusion areas report significantly higher active and passive peer effects compared to adopters in later diffusion areas. Potential adopters in later diffusion areas report higher passive peer effects than those in early diffusion areas. Overall, because LVV has a low PV adoption rate (<3%), short term strategies aimed at increasing PV adoption should emphasize WOM active peer effects. Here, we caution against long-term green marketing strategies focusing solely on peer-effects as the PV market matures.

14 SOLAR ENERGY↗

Formulation and calibration of two-dimensional constitutive models for composite structures based on panel tests

Steel Plate Concrete (SC) composite members have been widely adopted because of its cost-efficiency and enhanced structural behavior. While researchers have attempted to study its in-plane shear behavior in the past twenty years, very limited number of large-scale pure shear tests were performed due to the challenge of experimental set-up and the availability of facilities. In this paper, a series of uniaxial loading tests and two full-scale pure shear panel tests of SC members were reported, on which the “mechanics-based Membrane Model of SC elements (MM-SC)” is developed. The MM-SC model is based on the fixed-angle crack formulation and the smeared-crack formulation, in which the experimental-based uniaxial constitutive models are implemented, considering the local buckling of faceplate, the tension stiffening of steel plate, the strength degradation of cracked concrete and the confinement effect of concrete. The proposed MM-SC model is subsequently incorporated into the object-oriented software OpenSEES. Finally, the simulation results of proposed model well predict the SC test observations in terms of critical branch points and structural behaviors, including initial stiffness, cracking strength, post-crack stiffness, yield strength, maximum strength, and failure modes.

42 ENGINEERING↗

Fine particle Sr{sub 2}SiO{sub 4}:Tb phosphor for the plasma display panel prepared by a combined approach

Sol-gel with microwave heating was employed to prepare fine particles Sr{sub 2}SiO{sub 4}:Tb phosphor. X-ray diffractometer was used to characterize the structural of the samples. The Scanning Electron Microscope image shows that the particle size is about 300 nm. The phosphor particles have several advantages in the morphology, such as excellent surface quality, spherical shape, and narrow size distribution with no aggregation. The VUV luminescence measurements indicate that the phosphor presents an intense excitation band at 173 nm. Because the wavelength of excitation source in PDP is mainly at 147 and 172 nm, it makes Sr{sub 2}SiO{sub 4}:Tb a potential candidate for green emitting phosphor for plasma display panel (PDP) application. Photoluminescence (PL) measurements indicate that the Sr{sub 2}SiO{sub 4}:Tb particles present excellent green emission at 542 and 547 nm excitated at 236 and 172 nm, respectively.

36 MATERIALS SCIENCE↗

Two-phase flow measurements and observations in a cooling panel of the reactor cavity cooling system

The analysis of the flow behavior within a cooling panel of a scaled water-cooled reactor cavity cooling system has been performed supported by high-resolution measurements of the void fraction at the risers’ outlet. The results have shown a stable, symmetric distribution of the flow through the risers during subcooled boiling conditions, characterized by small, slow bubbles with average void fraction lower than 0.3 for all risers. As the temperature increased to saturation, flow distribution appeared strongly asymmetrical and unstable, with peaks of void fraction as high as 0.9. Large, faster bubbles were observed during these peaks, immediately followed by flow of subcooled liquid water. Flow stagnation and inversion has also been observed. The high resolution void fraction results, complemented by the measurements of the coolant flow rate and temperatures, not only have further described the behavior of the system under hypothetical accident conditions, but represent a unique set of data to support the validation of system-level codes, and more advanced computational tools.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Energy yield loss caused by dust deposition on photovoltaic panels

Large-scale solar plants are generally located in semi-arid and desert lands where abundant sunlight is available for solar energy con- version. These plants, however, suffer from two major environmental degradation factors: high ambient temperature and high concen- tration of atmospheric dust. Degradation of solar collectors’ performance caused by soiling results in a considerable loss of energy yield in all solar plants of the world. Dust and other particulate accumulation on solar collectors causes transmission loss. This is true with respect to transmission losses in photovoltaic (PV) and concentrated photovoltaic (CPV) systems, and for reflection losses in concen- trated solar power (CSP) systems. We present here a brief review of the energy yield losses caused by dust deposition on solar collectors, with particular emphasis on flat-panel photovoltaic (PV) systems. The review includes some of the major studies reported on energy-yield losses on solar plants in operation in several regions of the world. In addition, laboratory-soiling studies are also included. We report on degradation in the performance of solar plants based on the type of solar collectors, geographical location, local climate, and exposure period of the collectors absent any manual cleaning. An analysis of the advantages of cleaning processes that include natural, manual, automatic, and passive methods is presented. Our objective is to provide solar plant designers with a database for predicting anticipated soiling losses in different parts of the world, and for assessing effective cleaning methods for restoring a system’s energy yield.

14 SOLAR ENERGY↗

Assessment of uncertainty in the numerical simulation of solar irradiance over inclined PV panels: New algorithms using measurements and modeling tools

Development of accurate transposition models to simulate plane-of-array (POA) irradiance from horizontal measurements or simulations is a complex process mainly because of the anisotropic distribution of diffuse solar radiation in the atmosphere. The limited availability of reliable POA measurements at large temporal and spatial scales leads to difficulties in the comprehensive evaluation of transposition models. This paper proposes new algorithms to assess the uncertainty of transposition models using both surface-based observations and modeling tools. We reviewed the analytical derivation of POA irradiance and the approximation of isotropic diffuse radiation that simplifies the computation. Two transposition models are evaluated against the computation by the rigorous analytical solution. We proposed a new algorithm to evaluate transposition models using the clear-sky measurements at the National Renewable Energy Laboratory's (NREL's) Solar Radiation Research Laboratory (SRRL) and a radiative transfer model that integrates diffuse radiances of various sky-viewing angles. We found that the radiative transfer model and a transposition model based on empirical regressions are superior to the isotropic models when compared to measurements. We further compared the radiative transfer model to the transposition models under an extensive range of idealized conditions. Our results suggest that the empirical transposition model has slightly higher cloudy-sky POA irradiance than the radiative transfer model, but performs better than the isotropic models under clear-sky conditions. Significantly smaller POA irradiances computed by the transposition models are observed when the photovoltaics (PV) panel deviates from the azimuthal direction of the sun. The new algorithms developed in the current study have opened the door to a more comprehensive evaluation of transposition models for various atmospheric conditions and solar and PV orientations.

14 SOLAR ENERGY↗

Establishment of FXS-A9 panel with a single human X chromosome from fragile X syndrome-associated individual

Highlights: • We established mouse A9 cells with human X chromosome from FXS carrier and patient. • FXS-associated CGG repeats were stably maintained in established rodent cells. • Epigenetic status of CGG repeat region were maintained in established rodent cells. • Human FMR1 expression in these cells was according to each CGG repeat length. Fragile X syndrome (FXS) is the most common inheritable form of intellectual disability. FMR1, the gene responsible for FXS, is located on human chromosome Xq27.3 and contains a stretch of CGG trinucleotide repeats in its 5′ untranslated region. FXS is caused by CGG repeats that expand beyond 200, resulting in FMR1 silencing via promoter hypermethylation. The molecular mechanism underlying CGG repeat expansion, a fundamental cause of FXS, remains poorly understood, partly due to a lack of experimental systems. Accumulated evidence indicates that the large chromosomal region flanking a CGG repeat is critical for repeat dynamics. In the present study, we isolated and introduced whole human X chromosomes from healthy, FXS premutation carriers, or FXS patients who carried disease condition-associated CGG repeat lengths, into mouse A9 cells via microcell-mediated chromosome transfer. The CGG repeat length-associated methylation status and human FMR1 expression in these monochromosomal hybrid cells mimicked those in humans. Thus, this set of A9 cells containing CGG repeats from three different origins (FXS-A9 panel) may provide a valuable resource for investigating a series of genetic and epigenetic CGG repeat dynamics during FXS pathogenesis.

60 APPLIED LIFE SCIENCES↗

Correlation of Platinum Cytotoxicity to Drug-DNA Adduct Levels in a Breast Cancer Cell Line Panel

Platinum drugs, including carboplatin and oxaliplatin, are commonly used chemotherapy drugs that kill cancer cells by forming toxic drug-DNA adducts. These drugs have a proven, but modest, efficacy against several aggressive subtypes of breast cancer but also cause several side effects that can lead to the cessation of treatment. There is a clinical need to identify patients who will respond to platinum drugs in order to better inform clinical decision making. Diagnostic microdosing involves dosing patients or patient samples with subtherapeutic doses of radiolabeled platinum followed by measurement of platinum-DNA adducts in blood or tumor tissue and may be used to predict patient response. We exposed here a panel of six breast cancer cell lines to 14 C-labeled carboplatin or oxaliplatin at therapeutic and microdose (1% therapeutic dose) concentrations for a range of exposure lengths and isolated DNA from the cells. The DNA was converted to graphite, and measurement of radiocarbon due to platinum-DNA adduction was quantified via accelerator mass spectrometry (AMS). We observed a linear correlation in adduct levels between the microdose and therapeutic dose, and the level of platinum-DNA adducts corresponded to cell line drug sensitivity for both carboplatin and oxaliplatin. These results showed a clear separation in adduct levels between the sensitive and resistant groups of cell lines that could not be fully explained or predicted by changes in DNA repair rates or mutations in DNA repair genes. Further, we were able to quantitate oxaliplatin-DNA adducts in the blood and tumor tissue of a metastatic breast cancer patient. Together, these data support the use of diagnostic microdosing for predicting patient sensitivity to platinum. Future studies will be aimed at replicating this data in a clinical feasibility trial.

60 APPLIED LIFE SCIENCES↗

Developing an in silico minimum inhibitory concentration panel test for Klebsiella pneumoniae

Here, antimicrobial resistant infections are a serious public health threat worldwide. Whole genome sequencing approaches to rapidly identify pathogens and predict antibiotic resistance phenotypes are becoming more feasible and may offer a way to reduce clinical test turnaround times compared to conventional culture-based methods, and in turn, improve patient outcomes. In this study, we use whole genome sequence data from 1668 clinical isolates of Klebsiella pneumoniae to develop a XGBoost-based machine learning model that accurately predicts minimum inhibitory concentrations (MICs) for 20 antibiotics. The overall accuracy of the model, within ± 1 two-fold dilution factor, is 92%. Individual accuracies are >= 90% for 15/20 antibiotics. We show that the MICs predicted by the model correlate with known antimicrobial resistance genes. Importantly, the genome-wide approach described in this study offers a way to predict MICs for isolates without knowledge of the underlying gene content. This study shows that machine learning can be used to build a complete in silico MIC prediction panel for K. pneumoniae and provides a framework for building MIC prediction models for other pathogenic bacteria.

60 APPLIED LIFE SCIENCES↗

Fast oscillatory behavior of the excited xenon density in the discharge cells of a plasma display panel

Fast oscillation of the excited xenon density occurs universally after an electrical discharge in the cells of a plasma display panel. A theoretical model based on ion plasma oscillation simulates this oscillatory behavior of the excited xenon density reasonably well. The magnitude and lifetime of the excited xenon density in a metastable state depend highly on the electrode configuration. Particularly, T-type electrodes provide better generation and confinement of excited xenon atoms for an abundant emission of 173 nm ultraviolet light at a high level of efficiency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-efficiency plasma display panel based on a high xenon mole fraction

The luminance efficiency of a plasma display panel is directly related to the vacuum-ultraviolet (VUV) light emitted from excited xenon atoms and molecules. The emission efficiency of 173 nm VUV light is measured in terms of the xenon mole fraction ({chi}) and is shown to become considerably enhanced at a high xenon mole fraction. For example, the emission efficiency at {chi}=0.35 under a pressure of 400 Torr is more than 2.5 times that at {chi}=0.1. The experimental data agree remarkably well with theoretical predictions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Discharge characteristics of He-Ne-Xe gas mixture with varying Xe contents and at varying sustain electrode gap lengths in the plasma display panel

The discharge characteristics of He-Ne-Xe gas mixture in the plasma display panel were investigated using a two-dimensional numerical simulation to understand the effects of adding He and varying the Xe contents in the gas mixture, and also varying sustain electrode gap. With 5% Xe content and 60 mum sustain electrode gap, decreased ionization led to the improvement of the vacuum ultraviolet (vuv) efficacy at increasing He mixing ratios. However, at 20% Xe content and 60 mum sustain electrode gap, increased electron heating improved the vuv efficacy until the He mixing ratio reached 0.7, but the efficacy decreased beyond the ratio of 0.7 due to the increased ionization of Xe atoms. At 5% Xe content and 200 mum sustain electrode gap, the vuv efficacy increased as a result of increased electron heating at the gap space at increasing He mixing ratios.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of gas pressure and applied voltage on Xe excimer radiation from a micro dielectric barrier discharge for plasma display panel

We present the influence of gas pressure and applied voltage on Xe excimer radiation from a microdielectric barrier discharge (micro-DBD) in Ne/Xe gas mixture for plasma display panel. Measurements show that the excimer radiation with the 172 nm band lines is strongly observed in the afterglow, and drastically increases with an increase in gas pressure and applied voltage. It is also found that for high gas pressure and low voltage, excimer molecule (Xe{sub 2}{sup *}) is efficiently produced because of less infrared emission from Xe excited atom. The reaction processes of Xe metastable atom (Xe{sub 1s5}{sup *}), which is a precursor for Xe{sub 2}{sup *}, are theoretically analyzed using a one-dimensional fluid model. Increasing gas pressure results in large excimer radiation due to the enhancement of the following three processes, i.e., the conversion process from Xe{sub 1s5}{sup *} to Xe{sub 2}{sup *}, the direct electron impact excitation from ground state to Xe{sub 1s5}{sup *}, and the collisional de-excitation process from upper level (Xe{sup **}) to Xe{sub 1s5}{sup *}. The simulation analytical result shows that for lower voltage, Xe{sub 1s5}{sup *} is efficiently produced due to the increase in the ratio of direct excitation to Xe{sub 1s5}{sup *} from ground state and the suppression of the stepwise ionization from Xe{sub 1s5}{sup *} by electron collisions. While for high voltage operation of micro-DBD, the recombination process with Xe molecular ion (Xe{sub 2}{sup +}) and electron contributes to the total excimer radiation, which can be responsible for the large excimer radiation observed in experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mechanism and reduction of temporal image sticking in ac plasma display panel

It is found that temporal image sticking in ac plasma display panels (PDPs) is predominantly induced by organic impurities, such as C{sub x}H{sub y}, on the MgO surface. The vacuum ultraviolet produced during a short sustain discharge dissociates these organic impurities, such as C{sub x}H{sub y}, into C and H, where the latter then combines with the O from the MgO surface, resulting in the production of chemical compounds, including H{sub 2}O, that lower the luminance by hindering the visible conversion of the phosphor layer. Thus, according to this mechanism, minimizing the residual organic impurities, such as C{sub x}H{sub y}, on the MgO surface is a key factor for removing temporal image sticking. Therefore, to reduce the residual impurity level on the MgO layer of a 50 in. full-high definition (HD) ac-PDP with an He (35%)-Xe (11%) content, the MgO layer is given rf-plasma treatment using various gases, and the experimental results show that Ar plasma treatment was most effective in eliminating the residual impurities on the MgO layer and thereby improving the temporal image sticking.

36 MATERIALS SCIENCE↗

Simulation of striation in large-gap coplanar plasma display panels

The discharge processes and striation phenomenon in large-gap coplanar plasma display panels (PDPs) were investigated by particle-in-cell/Monte Carlo collision. The current pulse on electrodes and the delay time of discharge in simulation are consistent with the experimental results in large-gap PDP cell. Moreover, the current on cathode is mainly by displacement current during the rising edge of the second discharge. The evolution of the second series striations shows that the change in potential causes the striations 'suddenly' change from the first series to the second one. The spatial distribution of electron energy and electron energy distribution function (EEDF) are also obtained in the simulation. In the region of striation, the average energy of electrons changes remarkably as the striation forms, and EEDF is similar to that in the negative glow region. Negative glow can be considered as the important region in striation forming.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nondestructive characterization of as-fabricated composite ceramic panels

Decreasing the weight of protective systems, while minimizing the decrease in ballistic performance, is an ongoing goal of the Army. Ceramic materials are currently combined with other materials in these types of structures in order to decrease weight without losing ballistic performance. This includes structures in which the ceramic material is confined in some way and in which the ceramic material is completely encapsulated. Confinement or encapsulation of ceramic material within a structure generally adds complexity and cost. Relatively simple panel specimens fabricated with ceramic tiles on aluminum backings and side confinement using steel were evaluated using nondestructive methods, including x-ray computed tomography and ultrasonic testing. The nondestructive evaluation results will be discussed and compared, including the detectability and mapping of fabrication features.

07 ISOTOPE AND RADIATION SOURCES↗

Impact of Xe partial pressure on the production of excimer vacuum ultraviolet emission for plasma display panels

In this work, the effect of the Xe partial pressure on the excimer vacuum ultraviolet (VUV) emission intensity of the plasma display panels is investigated, both by measuring the spectral emission directly and by two-dimensional simulations. Experimentally, we find that at the high Xe partial pressure levels, there is an supra-linear increase of excimer VUV radiation and that determines the strong increase of luminance at the high pressures and high voltage. Due to the increase of the luminance and the almost unchanged discharge current, the luminous efficacy strongly increases with the Xe partial pressure. In addition, we also investigated the dynamics of the VUV generation, by measuring the decay time of the excimer VUV light as a function of the gas pressure. It is found that the decay time decreases with the increase of gas pressure. The spatial characteristics of the excimer VUV emission are also discussed. Different from the Ne and near-infrared emission, the excimer VUV emission is generated near the surface of the electrodes and increases uniformly on both sides of the anode and cathode (i.e., the bulk plasma region). Most importantly, it is found that the VUV production occurs during the afterglow period, while it is almost zero at the moment of the discharge itself. From the simulations, it can be seen that the Xe{sub 2}*({sup 3}{Sigma}{sub u}{sup +}) excimer species, which are generated from Xe*(1s{sub 5}), play a dominant role in the excimer VUV emission output at the high Xe partial pressure. The two-dimensional simulations also show that the strong increase of Xe excimer excitation states in the case of high pressure is mainly the result of the high conversion efficiency of the Xe excimer states, especially in the afterglow period. Due to the high conversion efficiency of Xe excitation species to Xe excimer species by the high collision rate in the case of high pressure, there is a strong increase of excimer VUV production, especially from the cathode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Detecting the relationship between economic growth, CO{sub 2} and energy consumption by using panel data approach

Many scholars have shown their interest into the relationship between energy consumption (EC), gross domestic product (GDP) and emissions. The main objective of this study is to investigate the relationship between GDP, EC and CO{sub 2} within multivariate model by using panel data method in Asian countries; Korea, Malaysia, Japan and China for annually data during the period 1960 to 2010. The main finding shows that CO{sub 2} can be explained more than 86% & 78% by EC and GDP in each of cross section model and period model respectively. As a result of that, CO{sub 2} emissions should be considered as an important factor in energy consumption and gross domestic product by policy maker.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗