Search NASA⌕ Search

SEARCH · Search NASA

Results for “Paper”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Engineering Paper-Based Sensors for Zika Virus

The emergence of Zika virus in Latin America has created an urgent need for new, simple yet sensitive diagnostic tests. We highlight recent work using paper-based sensors coupled with CRISPR/Cas9 to detect Zika RNA, as a new approach to rapid development and deployment of field-ready diagnostics for emerging infectious diseases.

60 APPLIED LIFE SCIENCES↗

Parton distributions and lattice QCD calculations: A community white paper

In the framework of quantum chromodynamics (QCD), parton distribution functions (PDFs) quantify how the momentum and spin of a hadron are divided among its quark and gluon constituents. Two main approaches exist to determine PDFs. The first approach, based on QCD factorization theorems, realizes a QCD analysis of a suitable set of hard-scattering measurements, often using a variety of hadronic observables. The second approach, based on first-principle operator definitions of PDFs, uses lattice QCD to compute directly some PDF-related quantities, such as their moments. Motivated by recent progress in both approaches, in this paper we present an overview of lattice-QCD and global-analysis techniques used to determine unpolarized and polarized proton PDFs and their moments. We provide benchmark numbers to validate present and future lattice-QCD calculations and we illustrate how they could be used to reduce the PDF uncertainties in current unpolarized and polarized global analyses. Finally, this document represents a first step towards establishing a common language between the two communities, to foster dialogue and to further improve our knowledge of PDFs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Opportunities and Challenges in Science and Technology of WO3 for Electrochromic and Related Applications (Invited Paper)

Since the discovery of the electrochromic (EC) effect in transition metal oxides in the mid-1960s, intense research and development work spanning four decades has led to many exciting developments in the science and technology of this class of materials. Tungsten oxide (WO{sub 3}) has emerged as one of the key materials, not only for EC devices, but also for many other related applications. After many years of technology development efforts, WO{sub 3}-based EC 'smart windows' have finally emerged as a viable commercial product. In spite of enormous progress being made on the structural, electrical, and optical properties of amorphous and crystalline WO{sub 3}, a detailed understanding of the EC effect in this material still remains somewhat qualitative. Although theoretical models based on intervalence charge transfer and polaron formation have been widely accepted, these models are still unable to explain some of the experimental results on the coloration phenomena. The coloration in WO{sub 3} is a structure-sensitive phenomenon, and excess electrons can be either localized or delocalized. The presence of structural defects such as oxygen vacancies, impurities, and degree of disorder plays a crucial role in determining the coloration efficiency. Although significant progress has been made in recent years on the calculation of electronic structure and defect properties of both amorphous and crystalline WO{sub 3}, the structural complexity of the material presents many challenges and opportunities for theoretical computation. The unique ability to induce bistable optical and electrical properties in WO{sub 3} by a variety of excitation sources has led to many devices of significant technological interest. Some of the applications currently being pursued include the photoelectrochemical cell for solar energy conversion and storage; photoelectrochemical splitting of water to generate hydrogen; chemical and biological sensors based on the gasochromic effect; photo- and electrocatalysts for a variety of chemical reactions; demonstration of high-temperature (91 K) superconductivity in WO{sub 3} doped with H, Na, and K; synthesis of a new class of hybrid organic/inorganic (WO{sub 3}) materials; and application in ultra-high-resolution electron beam lithography. The emergence of nanostructured WO{sub 3} in recent years will undoubtedly provide new opportunities and significant impact to many of these technologies. This paper presents a brief overview of some of the key research issues the author believes will impact the science and technology of this exciting material.

14 SOLAR ENERGY↗

Vertically Aligned MoS 2 /Mo 2 C hybrid Nanosheets Grown on Carbon Paper for Efficient Electrocatalytic Hydrogen Evolution

Maximizing and creating active sites has been a broad strategy to increase the performance of a catalyst. Because of the high electrocatalytic hydrogen evolution reactivity (HER) of ultrafine Mo 2 C nanocrystals and edges of two-dimensional MoS 2 , an electrode with a synergistic integration of these two nanomaterials is expected to show a better HER performance. In this work we report this hybrid nanostructure of vertically aligned MoS 2 /Mo 2 C nanosheets on conductive carbon paper. It was revealed that the original structure of MoS 2 nanosheets remains intact after the carburization, but the surfaces are incorporated with either Mo 2 C nanodomains or a heteroatomic mixture of S and C. The hybrid catalyst exhibits a much lower HER overpotential in comparison to those of the corresponding Mo 2 C and MoS 2 alone. Its high activity is congruent with DFT calculations, which show that multiple S and C coordinated Mo sites with near zero Gibbs free energy of hydrogen adsorption exist. Hence, the low overpotential of this binder-free hybrid catalyst is a result of active sites of Mo–S–C and highly dispersed Mo 2 C nanodomains on the original edges and basal planes of MoS 2 . Our prediction and realization of active HER sites with this hybrid two-dimensional nanostructure opens up a route toward the development of more active HER catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hybrid Composite Ni(OH)(2)@NiCo2O4 Grown on Carbon Fiber Paper for High-Performance Supercapacitors

We have successfully fabricated and tested the electrochemical performance of supercapacitor electrodes consisting of Ni(OH)(2) nanosheets coated on NiCo2O4 nanosheets grown on carbon fiber paper (CFP) current collectors. When the NiCo2O4 nanosheets are replaced by Co3O4 nanosheets, however, the energy and power density as well as the rate capability of the electrodes are significantly reduced, most likely due to the lower conductivity of Co3O4 than that of NiCo2O4. The 3D hybrid composite Ni(OH)(2)/ NiCo2O4/CFP electrodes demonstrate a high areal capacitance of 5.2 F/cm(2) at a cycling current density of 2 rnA/cm(2), with a capacitance retention of 79% as the cycling current density was increased from 2 to 50 mA/cm(2). The remarkable performance of these hybrid composite electrodes implies that supercapacitors based on them have potential for many practical applications.

Huang, L↗

Real-Time Screening for Uranium Enrichment by Paper Spray Ionization Mass Spectrometry for Field Applications

A rapid isotope ratio screening technique for uranium enrichment is demonstrated by utilizing paper spray ionization (PSI) high-resolution mass spectrometry (HRMS). Measurements were conducted using an ambient ionization mass spectrometer coupled to a custom-made JEOL PSI attachment apparatus, with de minimus sample preparation requirements. The current method detection limit for individual isotopes (e.g., 235 U and 238 U) is approximately 50 pg, with subsequent optimization expected to further improve U isotopic sensitivity. The PSI analytical method described herein can support rapid analysis (both in-field and in-lab screening) of isotopes-of-interest, as demonstrated by empirical differentiation of depleted uranium (DU) and low enriched uranium (LEU) analytical aliquots. Furthermore, this analytical workflow holds promise for applications in nuclear forensics, international nuclear safeguards, and nonproliferation missions.

Anions↗

Hybrid Li-air battery cathodes with sparse carbon nanotube arrays directly grown on carbon fiber papers

Sparsely populated, vertically aligned nitrogen doped carbon nanotube arrays (CNTAs) with dislocated-graphene stacking were grown directly on carbon fiber papers and investigated as hierarchical air cathodes in hybrid Li-air batteries with aqueous catholytes. The CNTAs were made with electrodeposited Ni nanocatalysts, followed by plasma-enhanced chemical vapor deposition. The thus obtained CNTAs can reach a population number density as low as similar to 10(7) per cm(2) on the carbon fibers, achieving an extremely high porosity of over 99% for the active layer in the cathode. The sparse CNTAs not only provide effective pathways for the reacting species, but also show a significantly high catalytic activity, which is found to be comparable to that of a supported Pt electrocatalyst. The high activity of the CNTAs is attributed to the rich graphene edges exposed on the CNT surface and nitrogen doping. Hybrid Li-air batteries with such cathodes have shown a consistent discharging capacity of 710 mA h g(-1) and a specific energy of 2057 W h kg(-1) at 0.5 mA cm(-2). Stable charge-discharge cycling at 0.5 mA cm(-2) showed an average potential difference of 1.35 V, indicative of a relatively small overpotential and high round trip efficiency (71%). Furthermore, the hybrid Li-air battery based on the hierarchical cathode can reach a power density as high as 10.4 mW cm(-2).

Li, YF↗

High-rate in-plane micro-supercapacitors scribed onto photo paper using in situ femtolaser-reduced graphene oxide/Au nanoparticle microelectrodes

Direct laser-reduction of graphene oxide (GO), as a lithography-free approach, has been proven effective in manufacturing in-plane micro-supercapacitors (MSCs) with fast ion diffusion. However, the power density and the charge/discharge rate are still limited by the relatively low conductivity of electrodes. Here, we report a facile approach by exploiting femtolaser in situ reduction of the hydrated GO and chloroauric acid (HAuCl 4 ) nanocomposite simultaneously, which incorporates both the patterning of rGO electrodes and the fabrication of Au current collectors in a single step. These flexible MSCs boast achievements of one-hundred fold increase in electrode conductivities of up to 1.1 × 10 6 S m –1 , which provide superior rate capability (50% for the charging rate increase from 0.1 V s –1 to 100 V s –1 ), sufficiently high frequency responses (362 Hz, 2.76 ms time constant), and large specific capacitances of 0.77 mF cm –2 (17.2 F cm –3 for volumetric capacitance) at 1 V s –1 , and 0.46 mF cm –2 (10.2 F cm –3 ) at 100 V s –1 . The use of photo paper substrates enables the flexibility of this fabrication protocol. Moreover, proof-of-concept 3D MSCs are demonstrated with enhanced areal capacitance (up to 3.84 mF cm –2 at 1 V s –1 ) while keeping high rate capabilities. As a result, this prototype of all solid-state MSCs demonstrates the broad range of potentials of thin-film based energy storage device applications for flexible, portable, and wearable electronic devices that require a fast charge/discharge rate and high power density.

36 MATERIALS SCIENCE↗

Foreword to Special Issue: Papers from the 50th Annual Meeting of the APS Division of Plasma Physics, Dallas, Texas, 2008

The year 2008 marked the 50th Anniversary of the Division of Plasma Physics (DPP) of the American Physical Society. This Special Issue presents many of the Review, Tutorial, and Invited papers that were presented at the 2008 Annual Meeting of the DPP, which was held 17-21 November, in Dallas, Texas. We are very pleased that many of the speakers have submitted an archival-quality version of their presentation for peer review and publication in Physics of Plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Addendum to papers from the GANIL (Grand Accelerateur National d'Ions Lourds) GANISOL Team, published in Proceedings of the 13th International Conference on Ion Sources, Gatlinburg, Tennessee, September 2009

This addendum applies to the paper authored by contributors from the Grand Accelerateur National d'Ions Lourds (GANIL) published in the February 2010 issue of Review of Scientific Instruments, within the Proceedings of the 13th International Conference on Ion Sources, Gatlinburg, Tennessee, September 2009 (Key Scientific coordinator: P. Delahaye; Technical coordinator: P. Jardin; SPIRAL 2 coordinator: R. Leroy and H. Fraanberg-Delahaye; GPI leader: P. Leherissier; and Direction correspondant: P. Roussel-Chomaz). This addendum provides the full list of GANISOL contributors and their affiliations.

43 PARTICLE ACCELERATORS↗

Improved field emission property of graphene paper by plasma treatment

Lateral orientation and aggregation of the graphene sheets limited field enhancement of graphene paper (GP). To improve the field enhancement of GP, argon plasma treatment was induced to destroy the aggregation and cause formation of surface protrusions. After Ar plasma treatment, turn-on field and threshold field of GP were reduced from 2.3 V/mum to 1.6 V/mum and 4.4 V/mum to 3.0 V/mum, respectively. The enhancement was attributed to the protrusions. Scanning electron microscopy and hydrophobicity had been used to prove the morphology change after plasma treatment.

36 MATERIALS SCIENCE↗

Foreword to Special Issue: Papers from the 52nd Annual Meeting of the APS Division of Plasma Physics, Chicago, Illinois, USA, 2010

We present in this Special Issue of Physics of Plasmas the review, tutorial, and invited papers of the 2010 Annual Meeting of the American Physical Society's (APS) Division of Plasma Physics. This was the 52nd year of this meeting, and it was held in Chicago, Illinois on 8-12 November 2010. The meeting program was made up of over 100 review, tutorial, and invited oral presentations, and a significant fraction of these speakers prepared manuscripts which were peer-reviewed and are contained in this Special Issue.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Correlation between macro- and nano-scopic measurements of carbon nanostructured paper elastic modulus

Extensive work has been done in order to determine the bulk elastic modulus of isotropic samples from force curves acquired with atomic force microscopy. However, new challenges are encountered given the development of new materials constructed of one-dimensional anisotropic building blocks, such as carbon nanostructured paper. In the present work, we establish a reliable framework to correlate the elastic modulus values obtained by amplitude modulation atomic force microscope force curves, a nanoscopic technique, with that determined by traditional macroscopic tensile testing. In order to do so, several techniques involving image processing, statistical analysis, and simulations are used to find the appropriate path to understand how macroscopic properties arise from anisotropic nanoscale components, and ultimately, being able to calculate the value of bulk elastic modulus.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Temperature dependent electrical properties of polyaniline film grown on paper through aniline vapor polymerization

Polyaniline thin film has been prepared on paper by aniline vapor deposition technique. Ferric chloride has been used as polymerizing agent in this approach. The prepared films were studied through electrical resistivity and optical properties measurements. The electrical resistivity of the polyaniline film shows significant temperature dependence. The resistance sharply falls with the increase in temperature. The optical absorbance measurements shows characteristics absorbance peak indicating the formation of conducting emeraldine salt form of polyaniline. The optical energy band gap of the film was calculated from the transmittance spectra. The optical energy band gap and electrical conductivity of the polyaniline film is well suited for their applications in electronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Laser shock XAFS studies at OMEGA facility [HPR invited paper on XAFS]

State-of-the-art laser facilities offer an excellent opportunity for studying materials at Mbar-Gbar pressures by dynamical compression. In this paper, we summarize recent experiments on EXAFS measurements of compressed solid iron up to 5 Mbar using OMEGA laser facility. The X-ray source is produced by a spherical implosion, providing enough brightness and spectral smoothness required for EXAFS measurements. The compression path is tuned by laser pulse shaping to achieve off-hugoniot states. Lastly, with an anharmonic model, the density, temperature and upper limit of strength of the compressed iron are determined from EXAFS data. Prospects of XAFS study of other materials are also discussed.

36 MATERIALS SCIENCE↗