Search NASA⌕ Search

SEARCH · Search NASA

Results for “Point Optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Optimized three-dimensional lenses for wide-angle scanning

Three-dimensional bootlace lens antennas with two and four focal points can be optimized to produce high-quality scanned beams over a wide field of view. For two-dimensional scanning, the planar feed locus is replaced by a curved feed locus designed to minimize path length errors. Comparisons with previous bootlace lens designs demonstrate the advantages of this focal distribution. The bifocal lens shows good scanning performance in both principal and orthogonal planes. The quadrufocal lens performs better in its principal plane than in its orthogonal plane. It is also shown that the quadrufocal lens can be realized with a planar outer surface and a circular focal arc, and improved scanning performance is still achievable. Further optimization of the focal arc and/or relaxation of the planar outer surface condition results in quadrufocal lenses with negligible phase errors in the principal plane.

Rappaport, C. M.↗

Optimal Allocation of Dynamic Var Sources Using the Voronoi Diagram Method Integrating Linear Programing

Dynamic reactive power (var) sources can effectively mitigate fault-induced delayed voltage recovery (FIDVR) issues. This paper optimizes the sizes of dynamic var sources at given locations against FIDVR issues under severe contingencies. First, the geometric characteristics about the non-convex solution space of this problem are studied. Accordingly, a Voronoi diagram approach integrating linear programming (LP) is proposed, which disperses a number of sample points of potential solutions in the searching space to construct a Voronoi diagram blending the local cost functions over the entire space by Barycentric interpolation in Voronoi regions. New sample points are then recursively added, including the tentative optimal point using LP, the most depopulated area point ensuring global fidelity, and the connecting point, until the stopping criterion is met. The new approach is demonstrated in detail on the WSCC 9-bus system. A case study on the NPCC 140-bus system also validates that the proposed approach can effectively estimate the boundary and the geometry of the feasible solution region in the searching space and find the optimal solution.

barycentric interpolation↗

Frequency Response Analysis to Monitor and Identify Changes in the Impedance of a Photovoltaic Panel Measured Online using a Power Optimizer

Photovoltaic (PV) cells are generally modeled as a current source due to photocurrent, p-n junction diodes with parasitic resistance, capacitance, and inductance. This paper proposes online frequency response analysis (FRA) to measure the impedance of a PV panel using an existing panel-level power optimizer in a PV system. The algorithm will actively perturb a small signal into a 300 W rooftop PV panel and compute its small signal impedance. The technology discussed is easy to incorporate, requires no additional hardware, doesn't alter the stability of the system, and is implemented at a steady-state point. The power optimizer initially stabilizes at an operating point and then perturbs the PV current via FRA and computes PV panel impedance. The relative standard deviation test conducted indoors under 300 W/m 2 illumination on a PV panel shows a less than 5% error rate in PV panel impedance magnitude and phase is measured using a power optimizer.

14 SOLAR ENERGY↗

Two examples in the time optimal control theory of distributed parameter systems.

The behavior of hyperbolic and parabolic partial differential equations is contrasted by studying the point-to-point time-optimal control problem for the equation of heat conduction and the equation of motion of a vibrating string. A maximal principle is obtained for the time-optimal control of the one-dimensional heat equation, and it is proven that time optimal controls are weakly bang-bang. The bang-bang principle is proven to be invalid for hyperbolic equations because of the finite speed of wave propagation. In the case of boundary value control of the vibrating spring, the latter is demonstrated by deriving an explicit formula for the time optimal control.

Quinn, J. P.↗

Geometrical Considerations for Piezoresistive Microcantilever Response to Surface Stress during Chemical Sensing

We have designed, fabricated, and tested five piezoresistive cantilever configurations to investigate the effect of shape and piezoresistor placement on the sensitivity of microcantilevers under either point loading and surface stress loading. The experimental study reveals that: (1) high aspect ratio cantilevers that are much longer than they are wide are optimal for point-loading applications such as microscopy and force measurements; (2) low aspect ratio cantilevers that are short and wide are optimal for surface stress loading scenarios such as those that occur in biological and chemical sensor applications. The sensitivity data for both point loads and surface stress are consistent with previously developed finite-element models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CRNT4SBML: a Python package for the detection of bistability in biochemical reaction networks

Motivation: Signaling pathways capable of switching between two states are ubiquitous within living organisms. They provide the cells with the means to produce reversible or irreversible decisions. Switchlike behavior of biological systems is realized through biochemical reaction networks capable of having two or more distinct steady states which are dependent on initial conditions. Investigation of whether a certain signaling pathway can confer bistability involves a substantial amount of hypothesis testing. The cost of direct experimental testing can be prohibitive. Therefore, constraining the hypothesis space is highly bene?cial. One such methodology is based on Chemical Reaction Network Theory which uses computational techniques to rule out pathways that are not capable of bistability regardless of kinetic constant values and molecule concentrations. Although useful, these methods are complicated from both pureandcomputationalmathematicsperspectives.Thus,theiradoptionisverylimitedamongstbiologists. Results: We brought Chemical Reaction Network Theory approaches closer to experimental biologists by automating all the necessary steps in CRNT4SMBL. The input is based on SBML format which is the community standard for biological pathway communication. The tool parses SBML and derives C-graph representations of the biological pathway with mass action kinetics. Next steps involve an ef?cient search for potential saddle-node bifurcation points using an optimization technique. This type of bifurcation is important as it has the potential of acting as a switching point between two steady states. Finally, if any bifurcation points are present, numerical continuation analysis extends the equilibria branches for generating the diagram. Presence of an S-shaped bifurcation diagram indicates that the pathway acts as a bistable switch for the given optimization parameters. Availability: CRNT4SBML is available via the Python Package Index. The documentation can be found at https://crnt4sbml.readthedocs.io. CRNT4SBML is licensed under the Apache Software License 2.0. Contact: vladislav.petyuk@pnnl.gov

Reyes, Brandon C.↗

Heuristic algorithms for design of integrated monitoring of geologic carbon storage sites

Designs for Risk Evaluation and Management (DREAM) is a tool developed under the National Risk Assessment Partnership (NRAP) to enhance geologic carbon storage safety and efficiency. Using potential leakage scenarios generated externally by the users preferred history-matching approach, DREAM constructs ideal combinations of sensor locations in the right place at the right time to detect as many leaks as possible, detect them as early as possible, and minimize cost. This user-friendly tool, developed in Java, features a window-based GUI for input and a 3D visualization tool for viewing the domain space and optimized monitoring plans. DREAM's latest version accommodates real-world usage by allowing for joint optimization of wellbore point sensor placements and surface geophysics survey geometries, and by using more efficient multi-objective optimization algorithms. We show an example where, these two improvements combined allow us to support containment assurance and go from detecting 80–90 % of the potential CO 2 leakage to +99.7 %, a step-change improvement that can make the deciding difference in whether a site is suitable for geologic carbon storage. Though developed for geologic carbon storage, this tool would be equally applicable in many surface or offshore environmental monitoring projects.

58 GEOSCIENCES↗

Nanocrystalline non-stoichiometric SBT: Effect of milling duration on structural and electrical characteristics

In the present work, nanocrystalline specimens of non-stoichiometric Strontium Bismuth Tantalate (SBT) ferroelectric ceramics were synthesized by mechanical activation process using a high energy planetary ball mill. The powders were milled for different milling durations (5, 10, 20 h) keeping the milling speed fixed at 300 rpm. Microstructural characterizations have been performed using X-ray diffraction, scanning electron microscopy, electron diffraction and transmission electron microscopy. Nanocrystallites with average grain size in the range of 30-50 nm are observed to be formed. Grain size is observed to decrease with increasing milling duration. Detailed dielectric study as a function of temperature has been carried out. It is observed that dielectric constant increases and dielectric loss decreases with increasing milling duration. The observed characteristics have been explained in terms of increased number of grain boundaries due to the reduction of granular size. - Highlights: Black-Right-Pointing-Pointer In the present work nano crystalline non-stoichiometric SBT has been synthesized. Black-Right-Pointing-Pointer The technique involved is mechanical activation (high energy ball milling). Black-Right-Pointing-Pointer The milling duration has been optimized. Black-Right-Pointing-Pointer Sr0.8Bi2.2Ta2O9 milled for 20 hours exhibit enhanced electrical characteristics.

36 MATERIALS SCIENCE↗

Optimizing Asynchronous Multi-Level Checkpoint/Restart Configurations with Machine Learning

With the emergence of versatile storage systems, multi-level checkpointing (MLC) has become a common approach to gain efficiency. However, multi-level checkpoint/restart can cause enormous I/O traffic on HPC systems. To use multilevel checkpointing efficiently, it is important to optimize check-point/restart configurations. Current approaches, namely modeling and simulation, are either inaccurate or slow in determining the optimal configuration for a large scale system. In this paper, we show that machine learning models can be used in combination with accurate simulation to determine the optimal checkpoint configurations. We also demonstrate that more advanced techniques such as neural networks can further improve the performance in optimizing checkpoint configurations.

checkpoint-restart↗

Integrate FARM with PID controllers: IES Simulation Ecosystem Control System Development

The FARM (Feasible Actuator Range Modifier) software module is a component of the RAVEN-based FORCE framework for analysis of Integrated Energy Systems (IES). FARM was designed to support the HERON software module in the solution of the optimal dispatch problem for IES units. As the result of HERON-FARM dispatch simulation, the set-point trajectories are optimized to meet constraints on both the production variables (i.e., the variables to be optimized such as the electrical power, the hydrogen production rate, etc.) and the process variables tied to the service life of equipment (e.g., steam flowrate, vessel pressure, turbine firing temperature, etc.) at a coarse time resolution (every 10 or 100 seconds) over long time horizons (several days or weeks). In case the operational constraints need to be met at finer time resolution, the computational burden of HERON-FARM would linearly increase with the sampling rate, and sub-optimal solutions might be obtained. System responses characterized by overshoots and damped oscillations temporarily violating the imposed constraints might occur during abrupt power transients. In this report, a hierarchical control system architecture for the operation of the Dynamic Energy Technology and Integration Laboratory (DETAIL) facility constructed at INL was proposed. First, the preliminary studies on the proposed control strategy for operating the facility and the designed PI controllers were reviewed. In particular, the current approach for generating the set-point trajectories was studied, and its limits were identified. To this aim, the inclusion of a Supervisory Control layer embedding a modified version of the FARM algorithm for preserving the system safe operation over both long and real-time horizons was proposed. In this way, FARM would be applied twice, i.e., the original version (“FARM Validator”) aiding the solution of the power dispatch problem, and the modified version (“FARM Supervisory” coordinating the PI controllers to address the real-time control tasks. Despite the kernel of the two modules is the same algorithm, their roles, tasks, and capabilities are quite different. A detailed description of the role of FARM at addressing low-level control tasks is provided, along with tentative operational procedures for training the models embedded into the algorithm by using the collected experimental data.

42 ENGINEERING↗

Pynta-An Automated Workflow for Calculation of Surface and Gas-Surface Kinetics

Many important industrial processes rely on heterogeneous catalytic systems. However, given all possible catalysts and conditions of interest, it is impractical to optimize most systems experimentally. Automatically generated microkinetic models can be used to efficiently consider many catalysts and conditions. However, these microkinetic models require accurate estimation of many thermochemical and kinetic parameters. Manually calculating these parameters is tedious and error prone, involving many interconnected computations. Here, we present Pynta, a workflow software for automating the calculation of surface and gas–surface reactions. Pynta takes the reactants, products, and atom maps for the reactions of interest, generates sets of initial guesses for all species and saddle points, runs all optimizations, frequency, and IRC calculations, and computes the associated thermochemistry and rate coefficients. It is able to consider all unique adsorption configurations for both adsorbates and saddle points, allowing it to handle high index surfaces and bidentate species. Pynta implements a new saddle point guess generation method called harmonically forced saddle point searching (HFSP). HFSP defines harmonic potentials based on the optimized adsorbate geometries and which bonds are breaking and forming that allow initial placements to be optimized using the GFN1-xTB semiempirical method to create reliable saddle point guesses. This method is reaction class agnostic and fast, allowing Pynta to consider all possible adsorbate site placements efficiently. We demonstrate Pynta on 11 diverse reactions involving monodenate, bidentate, and gas-phase species, many distinct reaction classes, and both a low and a high index facet of Cu. Our results suggest that it is very important to consider reactions between adsorbates adsorbed in all unique configurations for interadsorbate group transfers and reactions on high index surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Algebraic Multigrid with Filtering: An Efficient Preconditioner for Interior Point Methods in Large-Scale Contact Mechanics Optimization

Large-scale contact mechanics simulations are crucial in many engineering fields such as structural design and manufacturing. In the frictionless case, contact can be modeled by minimizing an energy functional; however, these problems are often nonlinear, nonconvex, and increasingly difficult to solve as mesh resolution increases. In this work, we employ a Newton-based interior-point (IP) filter line-search method, an effective approach for large-scale constrained optimization. While this method converges rapidly, each iteration requires solving a large saddle-point linear system that becomes ill-conditioned as the optimization process converges, largely due to IP treatment of the contact constraints. Such ill-conditioning can hinder solver scalability and increase iteration counts with mesh refinement. Here, to address this, we introduce a novel preconditioner, algebraic multigrid with filtering (AMGF), tailored to the Schur complement of the saddle-point system. Building on the classical AMG solver, commonly used for elasticity, we augment it with a specialized subspace correction that filters near null space components introduced by contact interface constraints. Through theoretical analysis and numerical experiments on a range of linear and nonlinear contact problems, we demonstrate that the proposed solver achieves mesh independent convergence and maintains robustness against the ill-conditioning that notoriously plagues IP methods. These results indicate that AMGF makes contact mechanics simulations more tractable and broadens the applicability of Newton-based IP methods in challenging engineering scenarios. More broadly, AMGF is well suited for problems, optimization or otherwise, where solver performance is limited by a low-dimensional subspace, such as those arising from localized constraints, interface conditions, or model heterogeneities. This makes the method widely applicable beyond contact mechanics and constrained optimization.

Mathematics and Computing↗

Recent progress in nanostructured multiferroic Bi{sub 2}FeCrO{sub 6} thin films

We report the latest progress on the growth and characterization of Bi{sub 2}FeCrO{sub 6} (BFCO), a recently discovered multiferroic system. BFCO thin films and nanostructures exhibit exceptional multiferroic properties at room temperature. The growth of pure BFCO thin films on STO substrates is possible only in a narrow window of deposition parameters (i.e., Oxygen pressure pO{sub 2}=1.2 Multiplication-Sign 10{sup -2} mbar and around a substrate temperature T{sub S}=680 Degree-Sign C). The epitaxial growth stabilizes the metastable single phase of this material and promotes the Fe/Cr cation ordering in both thin films and nanostructures. This cationic ordering which is responsible for good magnetic properties of BFCO is also at the origin of pronounced photovoltaic (PV) properties observed in the epitaxial films grown on STO substrates. The results indicate that the ferroelectric polarization plays a dominant role in the observed PV effect. - Graphical abstract: (Top) Crystal structure of BFCO thin films deposited on (1 1 1)-oriented SrTiO3:Nb substrates and direct evidence of the presence of cationic ordering Fe/Cr in the films. (Bottom) Control of the crystal orientation and the shape of the epitaxial nanostructures by the orientation of the niobium-doped STO substrates. Highlights: Black-Right-Pointing-Pointer Growth optimization of Bi{sub 2}FeCrO{sub 6} (BFCO) thin films and nanostructures by pulsed laser deposition. Black-Right-Pointing-Pointer Ordered BFCO single phase have been stabilized by epitaxial strain. Black-Right-Pointing-Pointer Arbitrary patterns of heteroepitaxial multiferroic BFCO nanostructures have been fabricated by PLD combined with nanostenciling. Black-Right-Pointing-Pointer Experimental characterizations revealed the excellent multiferroic character of BFCO thin films and nanostructures. Black-Right-Pointing-Pointer Unprecedentedly high power conversion efficiency for ferroelectrics was observed in 125 nm-thick highly ordered BFCO films.Graphical abstract legend.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of lithium cobalt oxide by single-step soft hydrothermal method

Lithium cobalt double oxide LiCoO{sub 2} was synthesized at 220 Degree-Sign C by soft hydrothermal method using Co(OH){sub 2} and LiOH as precursors, LiOH/NaOH as mineralizers and H{sub 2}O{sub 2} as oxidant. The soft hydrothermal synthesis method offers the dual advantage of a much lower synthesis time and a higher purity in comparison with other synthesis methods. The compound was identified by X-ray diffraction and its purity was checked by magnetic and electron magnetic resonance measurements. The grain morphology was studied by Scanning Electron Microscopy and an exponential growth of particle size with synthesis time was observed. - Graphical abstract: Concave cuboctohedrons obtained after 60 h reaction time. Highlights: Black-Right-Pointing-Pointer An optimized soft hydrothermal method for a fast synthesis of high purity LiCoO{sub 2} compound is reported. Black-Right-Pointing-Pointer Both lamellar and cuboctahedral particles could be stabilized. Black-Right-Pointing-Pointer Secondary phases content is lower than 0.1%. Black-Right-Pointing-Pointer Close to surface defects were evidenced using EMR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluation of on-line pulse control for vibration suppression in flexible spacecraft

A numerical simulation was performed, by means of a large-scale finite element code capable of handling large deformations and/or nonlinear behavior, to investigate the suitability of the nonlinear pulse-control algorithm to suppress the vibrations induced in the Spacecraft Control Laboratory Experiment (SCOLE) components under realistic maneuvers. Among the topics investigated were the effects of various control parameters on the efficiency and robustness of the vibration control algorithm. Advanced nonlinear control techniques were applied to an idealized model of some of the SCOLE components to develop an efficient algorithm to determine the optimal locations of point actuators, considering the hardware on the SCOLE project as distributed in nature. The control was obtained from a quadratic optimization criterion, given in terms of the state variables of the distributed system. An experimental investigation was performed on a model flexible structure resembling the essential features of the SCOLE components, and electrodynamic and electrohydraulic actuators were used to investigate the applicability of the control algorithm with such devices in addition to mass-ejection pulse generators using compressed air.

Masri, Sami F.↗

Anisotropic Solution Adaptive Unstructured Grid Generation Using AFLR

An existing volume grid generation procedure, AFLR3, was successfully modified to generate anisotropic tetrahedral elements using a directional metric transformation defined at source nodes. The procedure can be coupled with a solver and an error estimator as part of an overall anisotropic solution adaptation methodology. It is suitable for use with an error estimator based on an adjoint, optimization, sensitivity derivative, or related approach. This offers many advantages, including more efficient point placement along with robust and efficient error estimation. It also serves as a framework for true grid optimization wherein error estimation and computational resources can be used as cost functions to determine the optimal point distribution. Within AFLR3 the metric transformation is implemented using a set of transformation vectors and associated aspect ratios. The modified overall procedure is presented along with details of the anisotropic transformation implementation. Multiple two-and three-dimensional examples are also presented that demonstrate the capability of the modified AFLR procedure to generate anisotropic elements using a set of source nodes with anisotropic transformation metrics. The example cases presented use moderate levels of anisotropy and result in usable element quality. Future testing with various flow solvers and methods for obtaining transformation metric information is needed to determine practical limits and evaluate the efficacy of the overall approach.

Marcum, David L.↗

Solving security constrained optimal power flow problems by a structure exploiting interior point method

In this paper we present a new approach to solve the DC (n - 1) security constrained optimal power flow (SCOPF) problem by a structure exploiting interior point solver. Our approach is based on a reformulation of the linearised SCOPF model, in which most matrices that need to be factorized are constant. Hence, most factorizations and a large number of back-solve operations only need to be performed once. However, assembling the Schur complement matrix remains expensive in this scheme. To reduce the effort, we suggest using a preconditioned iterative method to solve the corresponding linear system. We suggest two main schemes to pick a good and robust preconditioner based on combining different “active” contingency scenarios of the SCOPF model. These new schemes are implemented within the object-oriented parallel solver (OOPS), a structure-exploiting primal-dual interior-point implementation. We give results on several SCOPF test problems. The largest example contains 500 buses. We compare the results from the original interior point method (IPM) implementation in OOPS and our new reformulation.

30 DIRECT ENERGY CONVERSION↗

NWChem: scalable parallel computational chemistry

NWChem is a general purpose computational chemistry code specifically designed to run on distributed memory parallel computers. The core functionality of the code focuses on molecular dynamics, Hartree-Fock and density functional theory methods for both plane-wave basis sets as well as Gaussian basis sets, tensor contraction engine based coupled cluster capabilities and combined quantum mechanics/molecular mechanics descriptions. It was realized from the beginning that scalable implementations of these methods required a programming paradigm inherently different from what message passing approaches could offer. In response a global address space library, the Global Array Toolkit, was developed. The programming model it offers is based on using predominantly one-sided communication. This model underpins most of the functionality in NWChem and the power of it is exemplified by the fact that the code scales to tens of thousands of processors. In this paper the core capabilities of NWChem are described as well as their implementation to achieve an efficient computational chemistry code with high parallel scalability. NWChem is a modern, open source, computational chemistry code1 specifically designed for large scale parallel applications2. To meet the challenges of developing efficient, scalable and portable programs of this nature a particular code design was adopted. This code design involved two main features. First of all, the code is build up in a modular fashion so that a large variety of functionality can be integrated easily. Secondly, to facilitate writing complex parallel algorithms the Global Array toolkit was developed. This toolkit allows one to write parallel applications in a shared memory like approach, but offers additional mechanisms to exploit data locality to lower communication overheads. This framework has proven to be very successful in computational chemistry but is applicable to any engineering domain. Within the context created by the features above NWChem has grown into a general purpose computational chemistry code that supports a wide variety of energy expressions and capabilities to calculate properties based there upon. The main energy expressions are classical mechanics force fields, Hartree-Fock and DFT both for finite systems and condensed phase systems, coupled cluster, as well as QM/MM. For most energy expressions single point calculations, geometry optimizations, excited states, and other properties are available. Below we briefly discuss each of the main energy expressions and the critical points involved in scalable implementations thereof.

99 GENERAL AND MISCELLANEOUS↗