Search NASA⌕ Search

SEARCH · Search NASA

Results for “Profiling optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Stimulated Raman shifting of the Nd:YAG fourth harmonic (266 nm) in H2, HD, and D2

The dependence of the first Stokes stimulated Raman conversion efficiency of fourth-harmonic radiation from a Nd:YAG laser at 266 nm has been studied for the isotopic species H2, HD, and D2 as a function of gas pressure and laser energy using a low numerical aperture (about 0.0045) pumping geometry. While the laser energy threshold for first Stokes conversion varies significantly among the species, photon conversion efficiencies of at least 50 percent can be achieved for all of them for laser pump energies at 266 nm of 50 mJ/pulse or less. This study provides a new measurement of the differential cross section for stimulated Raman scattering in HD of 8.1 + or - 2.4 x 10 to the -29th sq cm/sr at 266 nm and at high pressures, and agreement is found with previous measurements of the cross sections for H2 and D2. The results have been used to optimize the laser transmitter system for a differential-absorption lidar to measure tropospheric ozone concentration profiles.

Haner, David A.↗
NASA NTRS1995

An investigation of bleed configurations and their effect on shock wave/boundary layer interactions

The design of high efficiency supersonic inlets is a complex task involving the optimization of a number of performance parameters such as pressure recovery, spillage, drag, and exit distortion profile, over the flight Mach number range. Computational techniques must be capable of accurately simulating the physics of shock/boundary layer interactions, secondary corner flows, flow separation, and bleed if they are to be useful in the design. In particular, bleed and flow separation, play an important role in inlet unstart, and the associated pressure oscillations. Numerical simulations were conducted to investigate some of the basic physical phenomena associated with bleed in oblique shock wave boundary layer interactions that affect the inlet performance.

Hamed, Awatef↗
NASA NTRS2000

A Study of Upgraded Phenolic Curing for RSRM Nozzle Rings

A thermochemical cure model for predicting temperature and degree of cure profiles in curing phenolic parts was developed, validated and refined over several years. The model supports optimization of cure cycles and allows input of properties based upon the types of material and the process by which these materials are used to make nozzle components. The model has been refined to use sophisticated computer graphics to demonstrate the changes in temperature and degree of cure during the curing process. The effort discussed in the paper will be the conversion from an outdated solid modeling input program and SINDA analysis code to an integrated solid modeling and analysis package (I-DEAS solid model and TMG). Also discussed will be the incorporation of updated material properties obtained during full scale curing tests into the cure models and the results for all the Reusable Solid Rocket Motor (RSRM) nozzle rings.

Smartt, Ziba↗
NASA NTRS1997

Multi-Window Controllers for Autonomous Space Systems

Multi-window controllers select between elementary linear controllers using nonlinear windows based on the amplitude and frequency content of the feedback error. The controllers are relatively simple to implement and perform much better than linear controllers. The commanders for such controllers only order the destination point and are freed from generating the command time-profiles. The robotic missions rely heavily on the tasks of acquisition and tracking. For autonomous and optimal control of the spacecraft, the control bandwidth must be larger while the feedback can (and, therefore, must) be reduced.. Combining linear compensators via multi-window nonlinear summer guarantees minimum phase character of the combined transfer function. It is shown that the solution may require using several parallel branches and windows. Several examples of multi-window nonlinear controller applications are presented.

Lurie, B, J.↗
NASA NTRS2019

Evolution and Impact of Saturn V on Space Launch System from a Guidance, Navigation, and Mission Analysis Perspective

The Saturn V launch vehicle represented a jump in capability for heavy lift launch vehicles, enabling the Lunar Orbit Rendezvous approach to planetary exploration employed by the Apollo program 50 years ago. Following Apollo, and the development of the Space Transportation System, the NASA space exploration program shifted focus from lunar exploration to long-term, sustained, re-usable access to Low Earth Orbit. With the recent focus of NASA on the Artemis program and continued exploration of cislunar space as a precursor to Martian exploration, the shift has swung back to heavy lift capability. To meet this need, NASA has developed the Space Launch System. While the vehicle is a new design, it is heavily influenced by the engineering solutions and approach used on the Saturn V while taking advantage of the state of the art of launch vehicle design. The approach to abort, for example, shares many familiarities with the triggers and concept of operations used on Saturn V. Analysis approaches to dispersed trajectory performance are also very similar, but advances in computing technology have enabled a much more expanded set of inputs that can be modelled and assessed in a rapid manner. Additionally, guided flight algorithms share similar first principles but have expanded to include day of launch wind information. Trajectory optimization has also advanced significantly due to the availability of computing resources, but similar maneuvers and profiles are flown across both vehicles. Also, while the approach of onboard inertial navigation has been maintained between the two programs, the shift from platform to strapdown systems enables reduced complexity in the system design while maintaining required performance. As described, the Space Launch System is the evolution of NASA launch vehicle designs, owing a large heritage to the Saturn vehicle program and incorporating advances in propulsion systems, avionics, computing, and sensor technology over the past 50 years.

Ahmad, Naeem↗
NASA NTRS2009

The Integrated Medical Model: A Risk Assessment and Decision Support Tool for Space Flight Medical Systems

The Integrated Medical Model (IMM) is a decision support tool that is useful to mission planners and medical system designers in assessing risks and designing medical systems for space flight missions. The IMM provides an evidence based approach for optimizing medical resources and minimizing risks within space flight operational constraints. The mathematical relationships among mission and crew profiles, medical condition incidence data, in-flight medical resources, potential crew functional impairments, and clinical end-states are established to determine probable mission outcomes. Stochastic computational methods are used to forecast probability distributions of crew health and medical resource utilization, as well as estimates of medical evacuation and loss of crew life. The IMM has been used in support of the International Space Station (ISS) medical kit redesign, the medical component of the ISS Probabilistic Risk Assessment, and the development of the Constellation Medical Conditions List. The IMM also will be used to refine medical requirements for the Constellation program. The IMM outputs for ISS and Constellation design reference missions will be presented to demonstrate the potential of the IMM in assessing risks, planning missions, and designing medical systems. The implementation of the IMM verification and validation plan will be reviewed. Additional planned capabilities of the IMM, including optimization techniques and the inclusion of a mission timeline, will be discussed. Given the space flight constraints of mass, volume, and crew medical training, the IMM is a valuable risk assessment and decision support tool for medical system design and mission planning.

Kerstman, Eric↗
NASA NTRS2014

Computational Process Modeling for Additive Manufacturing

Computational Process and Material Modeling of Powder Bed additive manufacturing of IN 718. Optimize material build parameters with reduced time and cost through modeling. Increase understanding of build properties. Increase reliability of builds. Decrease time to adoption of process for critical hardware. Potential to decrease post-build heat treatments. Conduct single-track and coupon builds at various build parameters. Record build parameter information and QM Meltpool data. Refine Applied Optimization powder bed AM process model using data. Report thermal modeling results. Conduct metallography of build samples. Calibrate STK models using metallography findings. Run STK models using AO thermal profiles and report STK modeling results. Validate modeling with additional build. Photodiode Intensity measurements highly linear with power input. Melt Pool Intensity highly correlated to Melt Pool Size. Melt Pool size and intensity increase with power. Applied Optimization will use data to develop powder bed additive manufacturing process model.

Bagg, Stacey↗
NASA NTRS2019

Reinforcement Learning Applied to Cognitive Space Communications

The future of space exploration depends on robust, reliable communication systems. As the number of such communication systems increase, automation is fast becoming a requirement to achieve this goal. A reinforcement learning solution can be employed as a possible automation method for such systems. The goal of this study is to build a reinforcement learning algorithm which optimizes data throughput of a single actor. A training environment was created to simulate a link within the NASA Space Communication and Navigation (SCaN) infrastructure, using state of the art simulation tools developed by the SCaN Center for Engineering, Networks, Integration, and Communications (SCENIC) laboratory at NASA Glenn Research Center to obtain the closest possible representation of the real operating environment. Reinforcement learning was then used to train an agent inside this environment to maximize data throughput. The simulation environment contained a single actor in low earth orbit capable of communicating with twenty-five ground stations that compose the Near-Earth Network (NEN). Initial experiments showed promising training results, so additional complexity was added by augmenting simulation data with link fading profiles obtained from real communication events with the International Space Station. A grid search was performed to find the optimal hyperparameters and model architecture for the agent. Using the results of the grid search, an agent was trained on the augmented training data. Testing shows that the agent performs well inside the training environment and can be used as a foundation for future studies with added complexity and eventually tested in the real space environment.

Schubert, Carson D.↗
NASA NTRS2018

Optimization of Second Fault Detection Thresholds to Maximize Mission Probability of Success

In order to support manned spaceflight safety requirements, the Space Launch System (SLS) has defined program-level requirements for key systems to ensure successful operation under single fault conditions. The SLS program has also levied requirements relating to the capability of the Inertial Navigation System to detect a second fault. This detection functionality is required in order to feed abort analysis and ensure crew safety. Increases in navigation state error due to sensor faults in a purely inertial system can drive the vehicle outside of its operational as-designed environmental and performance envelope. As this performance outside of first fault detections is defined and controlled at the vehicle level, it allows for the use of system level margins to increase probability of mission success on the operational edges of the design. A top-down approach is utilized to assess vehicle sensitivity to second sensor faults. A wide range of failure scenarios in terms of both fault magnitude and time is used for assessment. The approach also utilizes a schedule to change fault detection thresholds autonomously. These individual values are optimized along a nominal trajectory in order to maximize probability of mission success in terms of system-level insertion requirements while minimizing the probability of false positives. This paper will describe an approach integrating Genetic Algorithms and Monte Carlo analysis to tune the threshold parameters to maximize vehicle resilience to second fault events over an ascent mission profile. The analysis approach and performance assessment and verification will be presented to demonstrate the applicability of this approach to second fault detection optimization to maximize mission probability of success through taking advantage of existing margin.

Anzalone, Evan J.↗
NASA NTRS1977

Mass drivers. 3: Engineering

This paper is the last of a series of three by the Mass-Driver Group of the 1977 Ames Summer Study. It develops the engineering principles required to implement the basic mass-driver design defined in paper I and as presented previously in the literature. Optimum component mass trade-offs are derived from a set of four input parameters, and the program used to design a lunar launcher. The mass optimization procedure is then incorporated into a more comprehensive mission optimization program called OPT-4, which evaluates an optimized mass-driver reaction engine and its performance in a range of specified missions. Finally, this paper discusses, to the extent that time permitted, certain peripheral problems: heating effects in buckets due to magnetic field ripple; an approximate derivation of guide force profiles; the mechanics of inserting and releasing payloads; the reaction mass orbits; and a proposed research and development plan for implementing mass drivers. This paper also considers further optimization that depends on advances in component technology beyond the present state. It is concluded that significant advantage can be gained in the case of small reaction engines with high emission velocity by developing lightweight packaging technology for silicon-controlled rectifiers (SCR's).

William H. Arnold↗
NASA NTRS2019

Simulaneous optimization of spacecraft and trajectory design for interplanetary missions utilizing solar electric propulsion

A major challenge in formulating interplanetary mission concepts utilizing electric propulsion is the large number of trajectory variables that must be considered (thrust profile, flyby options, launch vehicle delivery), all of which are affected by spacecraft design variables (power, mass, thruster, payload, staging). This is significantly more complex than traditional ballistic/chemical mission design and early concepts are often suboptimal as a result, potentially missing valuable options. This paper presents a novel tool (MORT) for simultaneously optimizing the spacecraft design alongside the trajectory given mission constraints and objectives, including example results relevant to the exploration of Mars.

Lock, Rob↗
NASA NTRS1978

A 10 micron laser heterodyne spectrometer for remote detection of trace gases

Infrared heterodyne spectroscopy provides a means of measuring the intensity profiles of individual rotation-vibration spectral lines with high sensitivity. Considerable effort has been expended on optimizing these instruments for remote measurements of gases in planetary atmospheres with the result that present-generation spectrometers are beginning to provide new and startling results on the planets. The fundamental principles of laser heterodyne spectroscopy are discussed. Detailed considerations of the optical design and the electronic design of the spectral-line receiver are given. Representative results obtained with this spectrometer are discussed, including precision frequency measurements of NH3 (nu-2) lines, detection of auroral emission from Jupiter, and measurements of terrestrial O3 and CO2.

Mumma, M. J.↗
NASA NTRS2010

Design Considerations of Polishing Lap for Computer-Controlled Cylindrical Polishing Process

The future X-ray observatory missions, such as International X-ray Observatory, require grazing incidence replicated optics of extremely large collecting area (3 m2) in combination with angular resolution of less than 5 arcsec half-power diameter. The resolution of a mirror shell depends ultimately on the quality of the cylindrical mandrels from which they are being replicated. Mid-spatial-frequency axial figure error is a dominant contributor in the error budget of the mandrel. This paper presents our efforts to develop a deterministic cylindrical polishing process in order to keep the mid-spatial-frequency axial figure errors to a minimum. Simulation studies have been performed to optimize the operational parameters as well as the polishing lap configuration. Furthermore, depending upon the surface error profile, a model for localized polishing based on dwell time approach is developed. Using the inputs from the mathematical model, a mandrel, having conical approximated Wolter-1 geometry, has been polished on a newly developed computer-controlled cylindrical polishing machine. We report our first experimental results and discuss plans for further improvements in the polishing process.

Khan, Gufran S.↗
NASA NTRS2012

Re-Engineering the Mission Operations System (MOS) for the Prime and Extended Mission

One of the most challenging tasks in a space science mission is designing the Mission Operations System (MOS). Whereas the focus of the project is getting the spacecraft built and tested for launch, the mission operations engineers must build a system to carry out the science objectives. The completed MOS design is then formally assessed in the many reviews. Once a mission has completed the reviews, the Mission Operation System (MOS) design has been validated to the Functional Requirements and is ready for operations. The design was built based on heritage processes, new technology, and lessons learned from past experience. Furthermore, our operational concepts must be properly mapped to the mission design and science objectives. However, during the course of implementing the science objective in the operations phase after launch, the MOS experiences an evolutional change to adapt for actual performance characteristics. This drives the re-engineering of the MOS, because the MOS includes the flight and ground segments. Using the Spitzer mission as an example we demonstrate how the MOS design evolved for both the prime and extended mission to enhance the overall efficiency for science return. In our re-engineering process, we ensured that no requirements were violated or mission objectives compromised. In most cases, optimized performance across the MOS, including gains in science return as well as savings in the budget profile was achieved. Finally, we suggest a need to better categorize the Operations Phase (Phase E) in the NASA Life-Cycle Phases of Formulation and Implementation

Extended Mission↗
NASA NTRS2008

Spline-Based Smoothing of Airfoil Curvatures

Constrained fitting for airfoil curvature smoothing (CFACS) is a splinebased method of interpolating airfoil surface coordinates (and, concomitantly, airfoil thicknesses) between specified discrete design points so as to obtain smoothing of surface-curvature profiles in addition to basic smoothing of surfaces. CFACS was developed in recognition of the fact that the performance of a transonic airfoil is directly related to both the curvature profile and the smoothness of the airfoil surface. Older methods of interpolation of airfoil surfaces involve various compromises between smoothing of surfaces and exact fitting of surfaces to specified discrete design points. While some of the older methods take curvature profiles into account, they nevertheless sometimes yield unfavorable results, including curvature oscillations near end points and substantial deviations from desired leading-edge shapes. In CFACS as in most of the older methods, one seeks a compromise between smoothing and exact fitting. Unlike in the older methods, the airfoil surface is modified as little as possible from its original specified form and, instead, is smoothed in such a way that the curvature profile becomes a smooth fit of the curvature profile of the original airfoil specification. CFACS involves a combination of rigorous mathematical modeling and knowledge-based heuristics. Rigorous mathematical formulation provides assurance of removal of undesirable curvature oscillations with minimum modification of the airfoil geometry. Knowledge-based heuristics bridge the gap between theory and designers best practices. In CFACS, one of the measures of the deviation of an airfoil surface from smoothness is the sum of squares of the jumps in the third derivatives of a cubicspline interpolation of the airfoil data. This measure is incorporated into a formulation for minimizing an overall deviation- from-smoothness measure of the airfoil data within a specified fitting error tolerance. CFACS has been extensively tested on a number of supercritical airfoil data sets generated by inverse design and optimization computer programs. All of the smoothing results show that CFACS is able to generate unbiased smooth fits of curvature profiles, trading small modifications of geometry for increasing curvature smoothness by eliminating curvature oscillations and bumps (see figure).

Li, W.↗
NASA NTRS1995

On th meridional surface profile of the Gulf Stream at 55 deg W

Nine-month records from nine inverted echo sounders (IESs) are analyzed to describe the mean baroclinic Gulf Stream at 55 deg W. IES acoustic travel times are converted to thermocline depth which is optimally interpolated. Kinematic and dynamic parameters (Gulf Stream meridional position, velocity, and vorticity) are calculated. Primary Gulf Stream variabiltiy is attributed to meandering and and changes in direction. A mean, stream-coordinate (relative to Gulf Stream instantaneous position and direction) meridional profile is derived and compared with results presented by other investigators. The mean velocity is estimated at 0.84 m/s directed 14 deg to the right eastward, and the thermocline (12 c) drops 657 m (north to south), corresponding to a baroclinic rise of the surface of 0.87 m. The effect of Gulf Stream curvature on temporal mean profiles is found to be unimportant and of minimal importance overall. The derived, downstream current profile is well represented by a Gaussian function and is about 190 km wide where it crosses zero. Surface baroclinic transport is estimated to be 8.5 x 10(exp 4) sq m/s, and maximum shear (flanking the maximum) is 1.2 x 10(exp -5). Results compare well with other in situ observational results from the same time period. On the other hand, analyses (by others) of concurrent satellite altimetry (Geosat) suggest a considerable narrower, more intense mean Gulf Stream.

Hallock, Zachariah R.↗
NASA NTRS1986

Stratospheric limb radiance simulations for the HCl channel of CLAES

The earthlimb radiance of the HCl detector array of the CLAES instrument is simulated in order to specify and optimize the free spectral range for the etalon used in this spectral region and to select sampling positions which facilitate the recovery of HCl profiles. Considerations entering into the limb radiance computation of each contributing species are discussed. Simulations are then presented for tangent heights of 15 to 5 km for daytime and nighttime conditions, and their significance for HCl retrievals is addressed. The simulation results indicate that the HCl (P2) feature should be observable in the earth limb emission spectrum, and that an etalon with an FSR of 12.6/cm optimally avoids interference from OH emission lines blended with the HCl feature by adjacent transmission peaks.

Mergenthaler, J. L.↗
NASA NTRS2003

Optimal Disturbances in Boundary Layers Subject to Streamwise Pressure Gradient

An analysis of the non-modal growth of perturbations in a boundary layer in the presence of a streamwise pressure gradient is presented. The analysis is based on PSE equations for an incompressible fluid. Examples with Falkner- Skan profiles indicate that a favorable pressure gradient decreases the non-modal growth while an unfavorable pressure gradient leads to an increase of the amplification. It is suggested that the transient growth mechanism be utilized to choose optimal parameters of tripping elements on a low-pressure turbine (LPT) airfoil. As an example, a boundary-layer flow with a streamwise pressure gradient corresponding to the pressure distribution over a LPT airfoil is considered. It is shown that there is an optimal spacing of the tripping elements and that the transient growth effect depends on the starting point. The amplification is found to be small at the LPT s very low Reynolds numbers, but there is a possibility to enhance the transient energy growth by means of wall cooling.

Ashpis, David E.↗