Search NASA⌕ Search

SEARCH · Search NASA

Results for “RECTANGULAR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Buckling tests of a 10 foot diameter stiffened cylinder with rectangular cutouts

A 10-foot diameter aluminum cylinder with rectangular cutouts in its ring and stringer stiffened wall was loaded to failure by an end bending moment. A 24x27 inch cutout, centered on the compression side of the shell, was first cut into the cylinder. After testing, the cutout area was enlarged to a 36/36 inch square cutout that removed the material damaged by buckling during the first test. After the second buckling test, the cutout area was patched with an equivalent stiffness plate bolted over the cutout hole. The cylinder was rotated 120 deg. and a 18x18 inch square hole cut into the center of the new compression side of the shell. Test specimen details, test procedures, and test results are presented.

Davis, Randall C.↗
NASA NTRS1987

Finite-element analysis of corner cracks in rectangular bars

Stress intensity factors for a wide range of quarter-elliptical corner cracks in rectangular bars are presented. Cracked configurations were subjected to remote tension, in-plane bending, or out-of-plane bending. Results were compared with other numerical results for a quarter-circular corner crack configuration. The present results along the interior of the crack generally agreed within 3 percent with those from the literature. Some larger differences (3 to 13 percent) were observed near the intersection of the crack front and the free surfaces in the boundary layer region. Analyses were performed to study the effect of mesh refinement in the boundary layer region and the influence of Poisson's ratio on the distribution of stress-intensity factors.

Raju, L. S.↗
NASA NTRS1986

Detailed near-wake flowfield surveys with comparison to an Euler method of an aspect ratio 4 rectangular wing

An experimental investigation of the flowfield in the near-wake of an aspect ratio 4 rectangular wing was conducted, providing a complete detailed set of data for use in the validation of computational methods. An angle of attack of 8 degrees and two Reynolds numbers 530,000 and 391,000 were investigated using pitot and six-hole probes. In addition, two types of flow visualization were employed. The data presented includes contours of total pressure, mean velocity, flow angularity, and vorticity distribution data at five chordwise stations of the near-wake ranging from 0.167 to 5.00 chord lengths aft of the trailing edge. The experimental results were compared to the predicted results of a 2-D Euler numerical method. The results predicted by an Euler method failed to accurately define the flowfield. Tangential velocities remained relatively constant over the range of X/C considered though increased in angle of attack and Reynolds number did bring about corresponding increases. Axial velocities also increased with angle of attack and Reynolds number but showed greater sensitivity to increases in X/C. Graphic displays and contours of the total pressure data indicate that roll-up of the wing tip vortex is essentially complete one and one half chords downstream of the trailing edge.

Klinge, M. D.↗
NASA NTRS1986

Generalization of rectangular element stiffness matrix and thermal load vector associated with a(0) + a(1)x + a(2)y + a(3)xy type interpolation rule

The stiffness-matrix formulation for the rectangular finite element described by Melosh (1963) and Weaver and Johnston (1984) is generalized to orthotropic materials with material axes not necessarily coincident with the x and y axes; i.e., the condition d(13) = d(23) = 0 is removed. Also included are explicit expressions for the element load vector associated with nonuniform temperature increase in the element. Applications to the analysis of thermal stresses in thin Si-crystal ribbons subjected to temperature changes with highly nonuniform lengthwise and transverse gradients (Utku et al., 1986) and to the simulation of the thermoviscoelastic behavior of growing Si ribbons (Utku and Ray, 1986) are indicated.

Ray, Sujit K.↗
NASA NTRS1987

The acoustic radiation damping of the modes of a rectangular panel

The acoustic damping for single modes of a finite rectangular panel, simply supported in an infinite baffle, is theoretically determined from the ratio of the acoustic energy radiated per cycle to the vibratory energy of the panel. Asymptotic solutions for the low-frequency region are presented for a panel mode driven at an arbitrary frequency and for a panel mode vibrating at its natural frequency. Curves of acoustic damping for a panel mode vibrating at resonance, as a function of the panel thickness-to-length ratio, are presented for various panel aspect ratios. For panels vibrating below the critical frequency, the damping depends on the aspect ratio with square panels developing the smallest value. For panels vibrating above the critical frequency, the damping is nearly independent of the aspect ratio.

Wallace, C. E.↗
NASA NTRS1984

Diffusive-convective vapor transport across horizontal and inclined rectangular enclosures

The enhancement of vapor transport across horizontal and inclined rectangular (two-dimensional) enclosures by expansive convection is studied numerically for a range in Grashof number that extends up to boundary layer flow. Comparison is made with predictions of the simplifying model and resulting analytical treatment of Klosse and Ullersma (1973) for various aspect ratios of the enclosure. The influence of varying Schmidt and Prandtl numbers is investigated. Solutions for interfacial (growth) flux and temperature distributions are given, showing practically important nonuniformities.

Markham, B. L.↗
NASA NTRS1988

High Rayleigh number convection in rectangular enclosures with differentially heated vertical walls and aspect ratios between zero and unity

High Rayleigh number convection in a rectangular cavity with insulated horizontal surfaces and differentially heated vertical walls was analyzed for an arbitrary aspect ratio smaller than or equal to unity. Unlike previous analytical studies, a systematic method of solution based on linearization technique and analytical iteration procedure was developed to obtain approximate closed-form solutions for a wide range of aspect ratios. The predicted velocity and temperature fields are shown to be in excellent agreement with available experimental and numerical data.

Kassemi, Siavash A.↗
NASA NTRS1988

Fingering flow patterns of thermosolutal convection in rectangular enclosures

Convection in rectangular enclosures with combined horizontal temperature and concentration gradients is studied. An electrochemical system is employed to impose the concentration gradients. Due to a large difference between the thermal and solutal diffusion rates the flow possesses double-diffusive characteristics. Very complex fingering flow patterns are observed around the two-phase interfaces. The main objective of the present work is to obtain more information on the flows near the two vertical phase interfaces under various parametric conditions. The fingering flows near the crystal could be one of the most important factors to cause the crystal imperfections. The ranges of the parameters studied are Sc (Schmidt number)=2200 to 2400, Pr (Prandtl number)=4.0 to 7.0, Gr sub T (Grashof number)=2.50 x 10 to the 6th to 5.10 x 10 to the 7th power, Ar (aspect ratio)=0.61 to 3.0, and N (buoyancy ratio)=0.05 to 54.8.

Wang, L. W.↗
NASA NTRS1987

Characteristics of a two-layer electromagnetically coupled rectangular patch antenna

Experimental results on the characteristics of a two-layer electromagnetically coupled rectangular patch antenna are presented. The variations of pattern shape, 3 dB beam width, and impedance bandwidth with spacing s between the two layers are studied for s between 0 and 0.37 lambda (0). A relatively high-gain region is found for s between 0.31 lambda (0) and 0.37 lambda (0).

Lee, R. Q.↗
NASA NTRS1987

Rectangular subsonic jet flowfield study

The flowfield of a rectangular jet with 2:1 aspect ratio was studied at an axial Reynolds number of 127,000, using a three-dimensional laser anemometer. The flowfield surveys resulted in mean velocity vector field plots and contour plots of the Reynolds stress tensor components for the major and minor axes. These data contribute substantially to currently available data of jet flowfields.

Morrison, Gerald L.↗
NASA NTRS1988

3-D LDA study of a rectangular jet

The flow field of a rectangular jet with a 2:1 aspect ratio was studied at an axial Reynolds number of 100,000 (Mach number 0.09) using three-dimensional laser Doppler velocimetry. The flow field survey resulted in mean velocity vector field plots and contour plots of the Reynolds stress tensor components. This paper presents contour plots in the planes of the jet minor and major axes at different axial locations. These data contribute substantially to currently available data of jet flow fields and will provide a valuable database for three-dimensional modeling.

Morrison, Gerald L.↗
NASA NTRS1988

Instantaneous velocity field measurements of a turbulent rectangular jet (AR-4) using particle image displacement velocimetry

A whole field experimental technique, commonly referred to as Particle Image Displacement Velocimetry (PIDV) is used for the measurement of the two dimensional instantaneous velocity fields in the transition region of a three dimensional jet issuing from a rectangular nozzle of an aspect ratio 4. The instability process of an initially laminar jet is studied visually and quantitatively to determine the structure and growth of the mixing region of the jet. The experiments were performed using an air jet at a Reynolds number based on the hydraulic diameter of 3600. The roll-up of the laminar shear layer into vortices and their subsequent interactions are examined.

Lourenco, L.↗
NASA NTRS1987

Circular-to-rectangular duct flows - A benchmark experimental study

A comprehensive set of total pressure and three-component laser velocimetry (LV) data has been obtained within two-circular-to-rectangular transition ducts at low subsonic speeds. This set of reference data was acquired for use in identifying secondary flow mechanisms and for assessing the accuracy of computational procedures for calculating such flows. Data were obtained at the inlet and exit planes of an aspect ratio three (AR3) duct having a length-to-diameter ratio (L/D) of one (1) and an aspect ratio six (AR6) duct having an L/D of three (3). Each duct was unseparated throughout its transition section. Cross-flow-vector plots and contour plots of axial velocity, total pressure, static pressure, axial turbulence, and axial vorticity in the exit plane of each duct are presented.

Patrick, William P.↗
NASA NTRS1988

Crosspolarisation characteristics of rectangular patch antennas

Theoretical results describing the crosspolarization characteristics of rectangular patch antennas are presented. Of particular interest is the result that the copolarization radiation is not sensitive to resonant frequency and substrate thickness while the crosspolarization component increases with resonant frequency and/or substrate thickness.

Huynh, T.↗
NASA NTRS1988

Fingering flow patterns of thermosolutal convection in rectangular enclosures

Convection in rectangular enclosures with combined horizontal temperature and concentration gradients is studied. An electrochemical system is employed to impose the concentration gradients. Due to a large difference between the thermal and solutal diffusion rates the flow possesses double-diffusive characteristics. Very complex fingering flow patterns are observed around the two-phase interfaces. The main objective of the present work is to obtain more information on the flows near the two vertical phase interfaces under various parametric conditions. The fingering flows near the crystal could be one of the most important factors to cause the crystal imperfections. The ranges of the parameters studied are Sc (Schmidt number) = 2200 to 2400, Pr (Prandtl number) = 4.0 to 7.0, Gr sub T (Grashof number) = 2.50 x 10 to the 6th to 5.10 x 10 to the 7th power, Ar (aspect ratio) = 0.61 to 3.0, and N (buoyancy ratio) = 0.05 to 54.8.

Wang, L. W.↗
NASA NTRS1988

Solar simulation with a rectangular beam

An existing space simulation test facility was modified by enlarging the solar simulator. Because of the restrictions imposed by existing equipment, the shape of the solar beam was altered from a circular to a rectangular cross section in order to adapt the test facility to test objects of increased size. This modification is described together with the results of preliminary measurements.

Feil, O. G.↗
NASA NTRS1988

Modal analysis applied to circular, rectangular, and coaxial waveguides

Recent developments in the analysis of various waveguide components and feedhorns using Modal Analysis (Mode Matching Method) are summarized. A brief description of the theory is presented, and the important features of the method are pointed out. Specific examples in circular, rectangular, and coaxial waveguides are included, with comparisons between the theory and experimental measurements. Extensions to the methods are described.

Hoppe, D. J.↗
NASA NTRS1989

Acoustic response of a rectangular waveguide with a strong transverse temperature gradient

An acoustic wave equation was developed for a perfect gas with spatially-variable temperature. The strong-gradient wave equation was used to analyze the response of a rectangular wave guide containing a thermally-stratified gas. It was assumed that the temperature gradient is constant, representing one-dimensional heat transfer with a constant coefficient of conductivity. The analysis of the waveguide shows that the resonant frequencies of the waveguide are shifted away from the values that would be expected from the average temperature of the waveguide. For small gradients, the frequency shift is proportional to the square of the gradient. The factor of proportionality is a quadratic function of the natural frequency of the waveguide with uniform temperature. An experiment is designed to verify the essential features of the strong-gradient theory.

Zorumski, William E.↗