Glycosyl residue composition and total carbohydrate in cell wall extracts from WT and PvGAUT4-KD lines
Glycosyl residue composition and total carbohydrate in cell wall extracts from WT and PvGAUT4-KD lines
bio engineered↗
SEARCH · Search NASA
Results for “Residue”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Glycosyl residue composition of cell wall extracts from stems of P. deltoides WT, vector control and PdGAUT4-KD plants
Glycosyl residue composition of cell wall extracts from stems of P. deltoides WT, vector control and PdGAUT4-KD plants
bio engineered↗
Glycosyl residue composition and total carbohydrate of cell wall extracts from WT and PdGAUT4-KD lines
Glycosyl residue composition and total carbohydrate of cell wall extracts from WT and PdGAUT4-KD lines
bio engineered↗
Closure Learning for Nonlinear Model Reduction Using Deep Residual Neural Network
Developing accurate, efficient, and robust closure models is essential in the construction of reduced order models (ROMs) for realistic nonlinear systems, which generally require drastic ROM mode truncations. We propose a deep residual neural network (ResNet) closure learning framework for ROMs of nonlinear systems. The novel ResNet-ROM framework consists of two steps: (i) In the first step, we use ROM projection to filter the given nonlinear system and construct a spatially filtered ROM. This filtered ROM is low-dimensional, but is not closed. (ii) In the second step, we use ResNet to close the filtered ROM, i.e., to model the interaction between the resolved and unresolved ROM modes. We emphasize that in the new ResNet-ROM framework, data is used only to complement classical physical modeling (i.e., only in the closure modeling component), not to completely replace it. We also note that the new ResNet-ROM is built on general ideas of spatial filtering and deep learning and is independent of (restrictive) phenomenological arguments, e.g., of eddy viscosity type. The numerical experiments for the 1D Burgers equation show that the ResNet-ROM is significantly more accurate than the standard projection ROM. The new ResNet-ROM is also more accurate and significantly more efficient than other modern ROM closure models.
Xie, Xuping↗
Galaxy Spin Classification. I. Z-wise versus S-wise Spirals with the Chirality Equivariant Residual Network
The angular momentum of galaxies (galaxy spin) contains rich information about the initial condition of the universe, yet it is challenging to efficiently measure the spin direction for the tremendous amount of galaxies that are being mapped by ongoing and forthcoming cosmological surveys. We present a machine-learning-based classifier for the Z-wise versus S-wise spirals, which can help to break the degeneracy in the galaxy spin direction measurement. The proposed chirality equivariant residual network (CE-ResNet) is manifestly equivariant under a reflection of the input image, which guarantees that there is no inherent asymmetry between the Z-wise and S-wise probability estimators. We train the model with Sloan Digital Sky Survey images, with the training labels given by the Galaxy Zoo 1 project. A combination of data augmentation techniques is used during the training, making the model more robust to be applied to other surveys. We find an ~30% increase in both types of spirals when Dark Energy Spectroscopic Instrument (DESI) images are used for classification, due to the better imaging quality of DESI. We verify that the ~7σ difference between the numbers of Z-wise and S-wise spirals is due to human bias, since the discrepancy drops to <1.8σ with our CE-ResNet classification results. We discuss the potential systematics relevant to future cosmological applications.
79 ASTRONOMY AND ASTROPHYSICS↗
DESI Strong Lens Foundry. III. Keck Spectroscopy for Strong Lenses Discovered Using Residual Neural Networks
We present spectroscopic data of strong lenses and their source galaxies using the Keck Near-Infrared Echellette Spectrometer (NIRES) and the Dark Energy Spectroscopic Instrument (DESI), providing redshifts necessary for nearly all strong-lensing applications with these systems, especially the extraction of physical parameters from lensing modeling. These strong lenses were found in the DESI Legacy Imaging Surveys using residual neural networks and followed up by our Hubble Space Telescope program, with all systems displaying unambiguous lensed arcs. With NIRES, we target eight lensed sources at redshifts difficult to measure in the optical range and determine the source redshifts for six, between z s = 1.675 and 3.332. DESI observed one of the remaining source redshifts, as well as an additional source redshift within the six systems. The two systems with nondetections by NIRES were observed for a considerably shorter 600 s at high airmass. Combining NIRES infrared spectroscopy with optical spectroscopy from our DESI Strong Lensing Secondary Target Program, these results provide the complete lens and source redshifts for six systems, a resource for refining automated strong lens searches in future deep- and wide-field imaging surveys and addressing a range of questions in astrophysics and cosmology.
Agarwal, Shrihan [University of Chicago, IL (Unite↗
Analytic continuation of noisy data using Adams Bashforth residual neural network
We propose a data-driven learning framework for the analytic continuation problem in numerical quantum many-body physics. Designing an accurate and efficient framework for the analytic continuation of imaginary time using computational data is a grand challenge that has hindered meaningful links with experimental data. The standard Maximum Entropy (MaxEnt)-based method is limited by the quality of the computational data and the availability of prior information. Also, the MaxEnt is not able to solve the inversion problem under high level of noise in the data. Here we introduce a novel learning model for the analytic continuation problem using a Adams-Bashforth residual neural network (AB-ResNet). Additionally, the advantage of this deep learning network is that it is model independent and, therefore, does not require prior information concerning the quantity of interest given by the spectral function. More importantly, the ResNet-based model achieves higher accuracy than MaxEnt for data with higher level of noise. Finally, numerical examples show that the developed AB-ResNet is able to recover the spectral function with accuracy comparable to MaxEnt where the noise level is relatively small.
97 MATHEMATICS AND COMPUTING↗
Properties of soil pore space regulate pathways of plant residue decomposition and community structure of associated bacteria
The goal of this study is to explore interactions between plant detritus and the micro-scale characteristics of physical micro-environments, that is, soil pores, and their influence on decomposition, on CO2 emission, and on composition of bacterial communities associated with the detritus. The study consisted of a series of soil incubation experiments with samples of contrasting pore characteristics with/without plant residue, accompanied by analyses of soil pores and phylogenetic analysis of microbial communities with rRNA genes via pyrosequencing.
16S rDNA↗
Pilot Plant Reliability Metrics for Grinding and Fast Pyrolysis of Woody Residues
The reliability of biomass size reduction, feeding, and conversion processes remains a critical technical hurdle and important cost driver for biomass conversion systems. While Biorefinery projects have typically focused on scaling up conversion technologies that maximize yield of desired products, e.g. fuels and chemicals, solids handling and reactor feeding systems are often considered secondarily. These are frequently scaled down or adapted from other industries, without a full appreciation of how biomass heterogeneity and variability impact process reliability. Here we present the effects of feedstock variability on relative throughput, mass loss, plant uptime, operator intervention, product yield, and product quality for grinding and fast pyrolysis operations at the pilot scale. Loblolly pine residues were sourced and collected using commercial harvesting techniques. Grinding and pyrolysis experiments were performed at INL's Biomass Feedstock National User Facility and NREL's Thermal and Catalytic Process Development Unit, respectively. Preprocessing throughput using a hammer mill varied between 31-48% of nameplate capacity (5 tons/hr), and fast pyrolysis throughput varied between 57-72% of nameplate capacity (20 kg/hr) for an overall system throughput of 18-35% of nameplate capacity across biomass preprocessing and conversion to pyrolysis oil. Pyrolysis oil yields varied between 46-53% (feedstock carbon to oil, dry basis). Grinder overloads in the size reduction step were more prevalent for lower ash and higher moisture materials. During fast pyrolysis operations, downtime was caused by bridging in the feed and char removal systems and plugging in the condensation system, and significant variation in the type and frequency of operator intervention was observed between feedstocks. Cohesion of solids (feedstock and char) leading to system plugging appeared less problematic for higher ash feedstocks, and differences in condenser plugging behavior between high and low ash feedstocks indicates the composition and physical nature of the deposited material is important for process reliability and is feedstock dependent.
09 BIOMASS FUELS↗
Heat treatment to anneal residual stresses during additive manufacturing
An additive manufacturing system having a heat source for melting powder particles in a desired shape and pattern to produce a product. A secondary heat source is used for heat treating the product to achieve heat treatment. The secondary heat source is used to peen or anneal residual stresses caused by the additive manufacturing process.
36 MATERIALS SCIENCE↗
Process Control Plan to Monitor Acceptable Levels of Flux and other residues
IPC J-STD –001G, Amendment 1 requires that the assembler have a sampling plan to assure that the process remains in control once qualified and validated. It is well documented that electrochemical failures occur at component sites where flux residues are not fully activated. It is also well known that specific components have a higher risk of electrochemical failure. Selecting a control plan that monitors the process and its performance on challenging components provides assurance that the process maintains control once established during process qualification. The test board used to qualify the process establishes an upper and lower spec limit for each of the component types on the test board. Surface Insulation Resistance upper and lower control limits, using challenging components that are representative of production hardware, represent a golden process condition. The golden image is a measure of process deviations that represents the performance of a resistance curve within a specific period. The objective is to judge whether the process in or out of control.
42 ENGINEERING↗
Life-Cycle Greenhouse Gas Emission Impacts of Forest Residue Pre-processing with Wet Milling
The goal of this analysis was to evaluate the environmental impact of a Case Study that uses wet milling to preprocess logging residues before feeding to a catalytic fast pyrolysis conversion step. The results of the Case Study were compared to those of the status quo Base Case system where dry milling is used. The results reveal that wet milling achieved 65% lower GHG emissions per dry ton of conversion-ready feedstock than the conventional dry milling technology. This is mainly because wet milling greatly reduced the energy consumption for drying. In addition, wet milling also generates fewer fines, thus improving the throughput of conversion-ready feedstock
biomass preprocessing↗
Particle Scale Impacts on Deconstruction Energy of Pine Residues
The goal of this Case Study was to quantify the impacts of variable moisture and ash on hammer mill throughput and energy consumption and on generation of fines that are not able to be fed to conversion, as compared to a status quo Base Case system. Also considered was convertible carbon content (minimum carbon specification) and maximum ash content and the delivered feedstock cost impacts of not being able to feed residue not meeting both specifications to the conversion reactor. Laboratory data on the impacts of input particle size and moisture content on the exit particle size were received from FCIC Subtask 5.2: Preprocessing, High Temperature Conversion Preprocessing from their single particle impact population balance modeling study (Tiasha Bhattacharjee, INL). Additional throughput and energy consumption data were obtained from FCIC Subtask 5.2 (Jordan Klinger, INL) for the same grinder with a 6 mm screen in place. These data were utilized to develop the necessary response surface equations to perform throughput analysis using discrete event simulation. Because the ash contents in the separated fines had not been analyzed in the laboratory at the time of the model runs, we chose to assume that the ash distributed proportionally with total mass into the overs and unders in the disk screen following grinding.
energy consumption↗
Assessment of Combustion Residual Leachate: Treatment Standards, Wastewater Volumes, and Critical Mineral Recovery
This work presents NETL’s efforts in quantifying aspects of combustion residual leachate, including national volumes and the presence of critical minerals. In addition, local and federal treatment standards are articulated, and the market size of critical minerals (in $/yr) are calculated on a national level.
Able, Chad↗
Residual loss due to magnetic flux trapping in niobium superconducting microwave cavities
One of the significant source of radio frequency loss in superconducting microwave cavities is the trapped residual magnetic field during the cooldown due to the incomplete Messier effect. The sensitivity of flux trapping depends on the distribution of impurities, network of dislocations and defects which pin vortices. Recent advancement in cavity processing techniques resulted in very high quality factors with impurity doping, however the rf loss related to the flux trapping increases. High quality factor in SRF cavities is not only limited to particle accelerators but also emerging as an application to quantum computing and quantum information science. In this presentation, we present the results of measurements of flux trapping sensitivity on several 1.3 GHz elliptical accelerating cavities with different grain size, impurity content and surface preparations.
Dhakal, P.↗
Bio-Intermediates and Bio-Residuals as Marine Fuels
This presentation will be focusing on bio-intermediates/bio residuals as marine fuels, hitting on neat versus blending, TEA, current use, and future production outlook.
bio-fuel↗
Residual Dose Rates Analyses from Vent Lines Shield Block on the Target Cart at Spallation Neutron Source
The target carriage supports the mercury target vessel in the Spallation Neutron Source (SNS) in a cantilevered fashion and supplies the liquid mercury flowing to and from the target vessel. The target carriage is designed to move the target vessel into its target monolith position to receive the proton beam and then remove it horizontally back into an adjacent service cell, where the target vessel can be exchanged about 2-3 times per calendar year. At the time of the performed studies, the SNS mercury target can accept a proton beam at 1 GeV energy and 1.4 MW power; however, it will be upgraded to receive 1.3 GeV energy at 2 MW by the end of 2024 year [1]. The cart is practically a shield block on wheels to minimize fluxes and dose rates in the service cell downstream of the carriage. There are vent lines located inside a passage on top of the target carriage, and they are covered by a stepping-up steel shield block (vent lines shield block). Vent lines are permanently attached to the shield block. New vent lines with a different design are going to be installed. These lines are shielded by the new steel block to which the vent lines are attached. The estimate of the residual dose rates from the block after it is extracted from the target carriage is performed to estimate the radiation fields and to decide on the type of storage container to be used.
Popova, Irina I↗
Potential Integration Between Residual Biogenic Process Resources and Greener Hydrogen Production from Steam Reformers
Biomass conversion processes have varying efficiencies towards specific products like liquid fuels; process inefficiencies result in byproducts such as off-gases, heat, and solid residues such as char. The efficient use of these byproducts is key towards getting the maximum sustainability benefits from valuable biomass resources. For example, there are various utility product options that can utilize heat and off-gases from biomass pyrolysis processes; they include process heat and steam, hydrogen, fuel gas, and electricity. Further, there is potential for the use of the off-gases to supplement natural gas feed into steam reformers for hydrogen production. This presentation highlights results from previous analyses on tradeoffs based on utility byproduct choices (https://doi.org/10.1039/D3SE00745F); maximizing hydrogen production from off-gases is one potential winning strategy. This leads to the question regarding the utilization of these off-gases in existing steam reformers and the process impacts from feeding off-gases. Process modeling of a steam reformer system (https://doi.org/10.1002/adsu.20230021) quantifies those impacts and shows how much off-gas substitution is possible within the limits of an existing design with such an integration strategy.
biogenic gases↗