Search NASA⌕ Search

SEARCH · Search NASA

Results for “SIGNAL-TO-NOISE RATIO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

The asymmetric profile of the H76 alpha line emission from MWC349

MWC349 is an emission-line star found by Merrill, Humason and Burwell (1932). Braes, Habing and Schoenmaker (1972) discovered that it is a strong radio source. The radio emission originates in a massive ionized wind that is expanding with a velocity of about 50 km s(-1). Its continuum spectrum fits well a nu(0.6) power law from the cm wavelengths to the far-IR. Radio recombination line emission from the envelope of MWC349 was first detected by Altenhoff, Strittmatter and Wendker (1981). We have obtained good signal-to-noise ratio, Very Large Array observations of the H76 alpha radio recombination line from the ionized wind of MWC349. Our data reveal that the profile is markedly asymmetric, with a steep rise on the blue side. This asymmetry could be due to non-LTE effects in the formation and transfer of the line or to intrinsic asymmetries in the envelope. Our analysis suggests that most probably the peculiar profile is caused by a non-LTE enhancement of the line emission from the side of the envelope nearer to the observer. This asymmetry has the opposite sense than that observed in optical and IR recombination lines, where a different effect (absorption of the stellar continuum by the gas in the wind between the star and the observer) is known to be dominant, leading to the classic P Cygni profile. We propose that the profiles of the radio recombination lines from ionized stellar winds will have this characteristic shape, while optical and IR recombination lines are characterized by P Cygni-like profiles. Unfortunately, at present the detection of radio recombination lines from ionized stellar winds is only feasible for MWC349 and a few other objects.

Rodriquez, L. F.↗

Table look-up estimation of signal and noise parameters from quantized observables

A table look-up algorithm for estimating underlying signal and noise parameters from quantized observables is examined. A general mathematical model is developed, and a look-up table designed specifically for estimating parameters from four-bit quantized data is described. Estimator performance is evaluated both analytically and by means of numerical simulation, and an example is provided to illustrate the use of the look-up table for estimating signal-to-noise ratios commonly encountered in Voyager-type data.

Vilnrotter, V. A.↗

A comparison of the continuum colors of P/Halley, other comets, and asteroids

Early observations (1985 Feb.) of P/Halley were made with broadband BVJK filters when a substantial fraction of the light came from the nucleus; the resulting colors appear red, but with signal-to-noise ratios less than or = 5. More recent observations were made with the narrower International Halley Watch continuum filters when the light from the comet is dominated by the coma. The colors over the wavelength range 0.3 to 0.7 microns are more neutral. Continuum colors were also observed for other comets. All show moderately red to very red colors that can be best matched by asteroids of the P and D spectral classes, suggesting that the refractory component of comets is similar to that of the more distant asteroids.

Tholen, D. J.↗

The ultraviolet IUE spectrum of the population II horizontal-branch A star HD 109995

Eight SWP and six LWP high dispersion IUE images of the field horizontal-branch A star HD 109995 have been averaged to increase the signal-to-noise ratio. The line density in the UV is greater than that of the optical region, but less than that of comparable population I A stars. Many of the identified lines are those of Fe II. Lines of C I, C II, N I, O I, Mg I, Mg II, Al II, Al III, Si I, Si II, P II, S I, Cl I, Ti II, V II, Cr II, Mn II, Fe I, Co II, Ni II, Zn II, and Ge II are also present. Definite interstellar lines of C II, Mg I, Mg II, Al II, Si II, and Fe II were found.

Adelman, S. J.↗

Solar Doppler shifts - Sources of continuous spectra

Oscillation observations can be used to study nonoscillatory solar phenomena that exhibit Doppler shifts. The paper discusses several effects of these phenomena and their associated temporal and spatial power spectra: (1) they limit the signal-to-noise ratio and sometimes detectability of oscillation modes; (2) there is the potential for better understanding and/or detection of solar phenomena; (3) large-scale convection may spatially modulate oscillation modes, leading to a continuous background spectrum; and (4) in regions of the spectrum where the resolution to separate modes is lacking one can determine upper limits for the integrated effects of modes.

Duvall, T. L., Jr.↗

Spectroscopic CCD surveys for quasars at large redshift. II - A Pfuei transit survey

A CCD transit survey has been carried out with the 200 in. telescope of a strip of sky 5 arcmin wide and 9 hr long. Direct images and slitless spectra of over 43,000 objects were obtained on two successive nights. An automatic search for emission lines of given minimum equivalent width and signal-to-noise ratio yielded 52 candidate sources. Slit spectra revealed that 24 were emission-line galaxies with z less than 0.4 and eight were quasars with 2 between 1.00 and 2.76. The number of quasars detect agrees with that predicted from luminosity function models for z less than 2.9. The models also indicate that between 30 and 62 quasars with z less than 2.9 should have been found in this survey, but none were detected. This result reconfirms that there is a redshift cutoff near or below redshift three. The apparent conflict of this measurement with the known existence of dozens of quasars with redshifts larger than three is discussed.

Schmidt, Maarten↗

Near-ultraviolet spectroscopy of Seyfert nuclei - Reddening and Bowen fluorescence

Spectra with high signal-to-noise ratios extending down to the atmospheric ultraviolet cut-off have been obtained for 11 Seyfert nuclei with narrow emission lines. In all objects the He II lines at 3204 A and 4686 A were measured simultaneously. Their ratio gives an estimate of reddening accurate to 0.14 mag in E(B-V). The redshifts of nine of the Seyfert galaxies are sufficient to allow detection of the O III 3133 line A, produced by Bowen fluorescence of He II Ly-alpha photons. The inferred efficiency of the Bowen mechanism ranges from 15 to 50 percent. The lower values, which are considerably less than the efficiencies found in planetary nebulae, are observed in Seyfert 2 nuclei with systematically weaker emission lines from high-excitation, high-density gas. In contrast, the Seyfert 1 and high-excitation Seyfert 2 nuclei have more 'normal' Bowen efficiencies. Several possible explanations are considered.

Malkan, Matthew A.↗

Space observations of chemically peculiar and related normal stars

Progress in the spectroscopic study of CP stars and related sharp-lined normal stars from the IUE is briefly reviewed as a preamble to a discussion of the potential for research with the Hubble Space Telescope (HST). The substantial gains in spectral resolution, signal-to-noise ratio and photometric accuracy that will be realized with the High Resolution Spectrograph on the HST will dramatically increase the ability to disentangle the complex ultraviolet spectra of these stars and to carry out accurate quantitative analyses.

Leckrone, David S.↗

Investigations of CP and normal stars with coadded Dominion Astrophysical Observatory spectrograms

The procedures developed at the Dominion Astrophysical Observatory to coadd high dispersion coude spectrograms are described, and an increase in the signal-to-noise ratio in photographic data is shown. These techniques can yield low noise spectra over a considerable wavelength range. Preliminary results of the analyses of such coadditions are shown to demonstrate the power of these procedures.

Hill, Graham↗

Fast frequency acquisition via adaptive least squares algorithm

A new least squares algorithm is proposed and investigated for fast frequency and phase acquisition of sinusoids in the presence of noise. This algorithm is a special case of more general, adaptive parameter-estimation techniques. The advantages of the algorithms are their conceptual simplicity, flexibility and applicability to general situations. For example, the frequency to be acquired can be time varying, and the noise can be non-Gaussian, nonstationary and colored. As the proposed algorithm can be made recursive in the number of observations, it is not necessary to have a priori knowledge of the received signal-to-noise ratio or to specify the measurement time. This would be required for batch processing techniques, such as the fast Fourier transform (FFT). The proposed algorithm improves the frequency estimate on a recursive basis as more and more observations are obtained. When the algorithm is applied in real time, it has the extra advantage that the observations need not be stored. The algorithm also yields a real time confidence measure as to the accuracy of the estimator.

Kumar, Rajendra↗

Sequential ranging integration times in the presence of CW interference in the ranging channel

The Deep Space Network (DSN), managed by the Jet Propulsion Laboratory for NASA, is used primarily for communication with interplanetary spacecraft. The high sensitivity required to achieve planetary communications makes the DSN very susceptible to radio-frequency interference (RFI). In this paper, an analytical model is presented of the performance degradation of the DSN sequential ranging subsystem in the presence of downlink CW interference in the ranging channel. A trade-off between the ranging component integration times and the ranging signal-to-noise ratio to achieve a desired level of range measurement accuracy and the probability of error in the code components is also presented. Numerical results presented illustrate the required trade-offs under various interference conditions.

Mathur, Ashok↗

NIMBUS-7 CZCS. Coastal Zone Color Scanner Imagery for Selected Coastal Regions. North America - Europe. South America - Africa - Antarctica. Level 2 Photographic Product

The Nimbus-7 Coastal Zone Color Scanner (CZCS) is the first spacecraft instrument devoted to the measurement of ocean color. Although instruments on other satellites have sensed ocean color, their spectral bands, spatial resolution, and dynamic range were optimized for geographical or meteorological use. In the CZCS, every parameter is optimized for use over water to the exclusion of any other type of sensing. The signal-to-noise ratios in the spectral channels sensing reflected solar radiance are higher than those required in the past. These ratios need to be high because the ocean is such a poor reflecting surface that the majority of the signal seen by the reflected energy channels at spacecraft altitudes is backscattered solar radiation from the atmosphere rather than reflected solar energy from the ocean. The CZCS is a conventional multichannel scanning radiometer utilizing a rotating plane mirror at a 45 deg angle to the optic axis of a Cassegrain telescope. The mirror scans 360 deg; however, only 80 deg of data centered on the spacecraft nadir is collected for ocean color measurements. Spatial resolution at spacecraft nadir is 825x825 m with some degradation at the edges of the scan swath. The useful swath width from a spacecraft altitude of 955 km is 1600 km.

Source record↗

A dual plate thermoplastic recording device for holographic interferometry

The development of a dual plate holographic interferometer using thermoplastic recording devices is described. The operational characteristics of the thermoplastic devices are investigated and optimized for fringe contrast and signal-to-noise ratio. The dual plate device was demonstrated in a transonic wind tunnel at NASA Ames Research Center. The interferograms derived from the thermoplastic device are compared with those derived from conventional photographic emulsions. The fringe contrast achieved with the optimized thermoplastic device is equivalent to the contrast achieved with conventional techniques.

Umstatter, Holly L.↗

Performance results of a digital test signal generator

Performance results of a digital test signal-generator hardware-demonstration unit are reported. Capabilities available include baseband and intermediate frequency (IF) spectrum generation, for which test results are provided. Repeatability in the setting of a given signal-to-noise ratio (SNR) when a baseband or an IF spectrum is being generated ranges from 0.01 dB at high SNR's or high data rates to 0.3 dB at low data rates or low SNR's. Baseband symbol SNR and carrier SNR (Pc/No) accuracies of 0.1 dB were verified with the built-in statistics circuitry. At low SNR's that accuracy remains to be fully verified. These results were confirmed with measurements from a demodulator synchronizer assembly for the baseband spectrum generation, and with a digital receiver (Pioneer 10 receiver) for the IF spectrum generation.

Gutierrez-Luaces, B. O.↗

Calibration of the receiver channel for the GOPEX precursor experiments

Calibration measurements for the cooled (253 K) photomultiplier tube (PMT) detector, used on the receiver channel of the transmit/receive (T/R) switch for GOPEX, were conducted in the laboratory. A pulsed frequency-doubled neodymium:yttrium-aluminum-garnet (Nd:YAG) laser was used to direct 532-mn light on the PMT. By monitoring the energy per pulse of the light incident on the PMT, the minimum number of photons detected could be determined. These results agreed with the photon flux back-calculated from the PMT output waveform. Approximately 700 incident photons arriving during a temporal pulse width of approximately 65 nsec were detected with a signal-to-noise ratio (SNR) of approximately 1. Other receiver channel characteristics, such as PMT dark currents, optical transmission, and interference filter sensitivity to angle of light incidence, were also measured.

Biswas, A.↗

Project Echo: System Calculations

The primary experimental objective of Project Echo was the transmission of radio communications between points on the earth by reflection from the balloon satellite. This paper describes system calculations made in preparation for the experiment and their adaptation to the problem of interpreting the results. The calculations include path loss computations, expected audio signal-to-noise ratios, and received signal strength based on orbital parameters.

Ruthroff, Clyde L.↗

Project Echo: FM Demodulators with Negative Feedback

The primary experimental objective of Project Echo was the transmission of radio communications between points on the earth by reflection from the balloon satellite. Owing to the large path losses from transmitter to receiver via the satellite, a wide-band frequency modulation technique was used in which bandwidth was traded for signal-to-noise ratio. This paper describes the FM receiving demodulators employed. Negative feedback applied to the local oscillator reduces the FM modulation index in the receiver IF amplifiers, resulting in threshold performance superior to that of conventional FM receivers.

Ruthroff, Clyde L.↗

The Aeolus-Earth DWTS Heliophysics Mission

The Aeolus-Earth Mission (DWTS-Helio) is a recently selected NASA Heliophysics investigation that will apply the innovative Doppler Wind Temperature Sounder (DWTS) technique to the Space Atmosphere Interaction Region (SAIR) at ~105-180 km. The technique, invented by Gordley & Marshall (2011), applies the Doppler Scanning with Gas Filter (DSGF) technique using a cryo-cooled MWIR radiometer to view the limb of the atmosphere from LEO (orbital velocity creates the Doppler shifts required by the technique). For this implementation of DWTS, a Nitric Oxide (NO) low pressure gas cell is used. The limb of the atmosphere is observed from a spacecraft at orbital velocity, and as an observed air volume passes through the field of view, this velocity creates a set of Doppler-shifted images. These images are used to create Doppler Integrated Pass (DIP) signals, from which atmospheric temperature and wind profiles are extracted (it may be considered a converse of the successful in-flight calibration of gas cells used for the HALOE instrument). The technique is relative, removing the need for absolute radiances, and the signal-to-noise ratio for this technique is high, resulting in good measurement precision. Different gas cells can be used to create different altitude coverage and may be combined to measure a more continuous altitude range. For example, using a NO cell captures the lower atmosphere from 30-50km as well as the SAIR, while using the 13 isotopologue of CO2 would capture 50-120km. Due to the desired data volume as well as power and thermal considerations, this initial Aeolus-Earth flight will be more suited for a ‘hosted’ payload on an Orbital Maneuvering Vehicle platform instead of the ‘free-flyer’ option originally investigated. Lastly, the technique is sufficiently powerful that a two-channel system could produce full Mars atmosphere data not currently possible.

DWTS↗